There is a risk if mmi->pres_temp_zone value >= num_temp_zones.
This will casue pointer point to a illegal memory address.
Change-Id: Ic7c3d62c5c59bd41d9fd4f77cd537782c734a486
Reviewed-on: https://gerrit.mot.com/1725712
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
some non-standard QC2.0 charger (e.g. Tronsmart) will rise
vbus to 12V when phone do HVDCP3 detect protocol.
So when vbus reach 12V, we disable HVDCP to workaround it.
refer to (CR)
Change-Id: I1a1fbf1715ac6fbd12a9cd550207b210f16a951d
Signed-off-by: chailu1 <chailu1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1709435
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
When CPU idle is enabled, the idle call should also notifiy the
idle_notifier_call_chain of the change in status. Otherwise some
processes will think the CPU is always active.
Then it will cause some tasks occupy more cpu
Change-Id: Ie11770330bee93ce0e4622a3127ca4850abfb4ba
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1688959
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
fix compile erro on r due to qcom api changes
Change-Id: I0730df353be93f6f1f06193ddad651b18c399cc1
add R kernel compatibility requirement configs
Change-Id: If67721ab5abd57ad78160d59364e4ed9dd708fbc
config guam R
Change-Id: I1ecb8583728776be53a580c3251a2456713a3723
temp export kallsyms_lookup_name for fail loading some moto kos
Change-Id: I0f22aabb249219a587e696db3d1853a5dcd01afc
when unit suspend, pm_runtime_disalbe() would be called. And
then dev.power.disable_depth number will +1. And its value
will be -1 when pm_runtime_enable() is called.
And if spi bus want to work as soon as system resume, it will call
pm_runtime_get_sync(), which would check the value of
disable_depth. If its value is not 0, spi operation will fail.
The sequence is as following:
runtime_suspend
pm_runtime_disable()-> disable_depth +1
rumtime_resume
pm_runtime_eanble() -> disable_depth -1
spi_sync()
pm_runtime_get_sync -> check the value of disable_depth
But for sometimes, spi operation will earlier than pm_runtime_enable()
called. Then spi_sync() will fail duel to non-zero disable_depth value.
So we add a checking logic before pm_runtime_get_sync() to make sure
disable_depth is 0.
(pick from https://gerrit.mot.com/#/c/1500296/)
Change-Id: I69a0ee3d728ffe3c13d95208f203bd9ed22249b2
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1654438
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Port the spi changes from bq-6125.
- Do not force suspend for all spi bus.
This will not cause power issue, and can fix clock is closed when SPI
sync message.
- SPI driver missed to check spi runtime status in device suspend.
This may cause spi clocks not closed before device enter deep sleep
So check this status in spi suspend function, if bus not suspened,
break device suspend.
(pick from https://gerrit.mot.com/#/c/1498807/)
Change-Id: Id31492702506361a4ae5e2ccb9c5d381d321e143
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1654409
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
For inbox 10w and typeC product, the DCP current is
2A but not 1.8A. 1.8A come from micro usb product.
Change-Id: Ieb88d33dd8ba9b2fb58de07848ec1293dbc7cdd8
Signed-off-by: chailu1 <chailu1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1615575
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Limit Type-C HIGH charger to MEDIUM at hvdcp disalbed project
in case turbo charging at type-c high charger.
Change-Id: Ie63a88cd46917b0abefb552a000f80ef4bed3b2f
Signed-off-by: xuwei9 <xuwei9@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1611492
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
expose ssr_reason to ss_ramdump so that
bug2go can show it in their record.
Change-Id: I3858787a6426e8978566274f5f46212bacdaee58
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1596842
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
change pr_debug to pr_info for always print SD interrupt log
when CD pin triggered.
one line log increase but it's very useful for clarifying the
some kinds of SD card issue.
[ 233.306901] mmc1: cd gpio irq, gpio state 0 (CARD_REMOVAL)
[ 237.981056] mmc1: cd gpio irq, gpio state 1 (CARD_INSERT)
Change-Id: I74764bd501c7465fd01d7e5b500112725cd38ca0
Signed-off-by: fuxm1 <fuxm1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1594590
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Dongliang Yue <yuedl1@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
Prop from (CR)
If we have usb digital headphone pulled in during bootup. It will occupy
index 0. primary sound card can only use index 1. But in our most audio
code, We assume the primary sound card is 0. This will cause no sound
issue when we use primary sound card to playback and record.
Change-Id: Ic6cc79fc475e4e9978535f9557f05cef8c65d1f1
Signed-off-by: niuli1 <niuli1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1093502
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dandan Du <dudd1@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1516459
Reviewed-by: Yuesheng Huang <huangys@motorola.com>
(cherry picked from commit 780fde85cfdaaeb836c93b52cfd98210e5a98c30)
Reviewed-on: https://gerrit.mot.com/1586901
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Since ALS sensor's Firmware needs to keep track the PWM duty cycle of
each panels' version, therefore the panels' register 0xDA will be used
to identify the PWM duty cycle programmed in each panels' version.
The new /sys/class/drm/card0-DSI1/panelRegDA sysfs will be created.
Change-Id: I8abc7f31067614ce410348757aa8f75392788fb8
Signed-off-by: daiss1 <daiss1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1514795
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1583968
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
In user version, Moto kernel policy will mask all KERN_INFO
log to console, so change the power key press or release event
log level to make it work in user versions.
Change-Id: Ia4e7c33819f1e50b6a7778ea186bd1c83890b818
Reviewed-on: https://gerrit.mot.com/1545783
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1584163
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
The "hw_warmreset" reboot command, it indicates the kernel to trigger
warm reset for saving lastkmsg. After the system warm reboot, the AP
will save last kmsg logs and call a clean cold reboot with the
"post-hw_warmreset" command.
Change-Id: I3a25735a4e9ff0ab72c05d3ba2914d80477d30dc
Reviewed-on: https://gerrit.mot.com/1536789
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1584107
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
High duty cycleused for AICL/adaptive algorithm
Qcom default is enable, if disable perhaps cause
remain voltage while remove USB cable
Mot-CRs-fixed: (CR)
Change-Id: I686e503a44de890250b95a1ff0dc7c86c1081979
Signed-off-by: xuwei9 <xuwei9@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1553135
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
kernel configs enabled to support PASR which can hotplug RAM banks
we don't have multiple RAM slots in devices, disable this feature
to avoid potential performance penalty
Change-Id: Ia6012bb0ab887b64ee5976c278949ace9c2354aa
Reviewed-on: https://gerrit.mot.com/1549420
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
As the USB hal service is the root user, so it is the same user as the
dual role sysfs node, and it is OK to change the sysfs node access mode
dynamicly for PD. Otherwise the sysfs node will lose sysfs node mode
update.
Revert "Revert "usb: phy: dual-role: update sysfs attrs when changed""
This reverts commit 4dabf448ae341dd492b45eb0f82fdd77ee5ef584.
Change-Id: Id3651703b4e250ac6af6cb3dc94d3ca328a3a259
Reviewed-on: https://gerrit.mot.com/1257104
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1413206
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-on: https://gerrit.mot.com/1536373
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
xieqiong2