arm/defconfig: add 32bit debug config

define arm and arm64 specific debug config

Change-Id: Ib56827bf9550739f236b4a52b8e0f94b213ec060
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1539598
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key

arch/arm64/configs/vendor/ext_config/debug-bengal-arm.config

@@ -0,0 +1,57 @@
+#
+# Please avoid changing the Qualcomm defconfig files and use this file to
+# add any Motorola-specific configuration changes that are applicable to
+# userdebug, eng, and user builds.
+#
+# After building, a list of all of the config files that are used can be found
+# at the top of:
+# out/target/product/$(PRODUCT)/obj/KERNEL_OBJ/mapphone_defconfig
+#
+# The actual output of the kernel configuration system can be found at:
+# out/target/product/$(PRODUCT)/obj/KERNEL_OBJ/.config
+#
+# You can check the .config file to verify that your configuration option is
+# being set as expected.
+#
+CONFIG_AT803X_PHY=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BRIDGE_EBT_ARPREPLY=y
+CONFIG_BRIDGE_EBT_DNAT=y
+CONFIG_BRIDGE_EBT_SNAT=y
+CONFIG_BRIDGE_EBT_T_FILTER=y
+CONFIG_BRIDGE_EBT_T_NAT=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CFG80211_INTERNAL_REGDB=y
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_WORK=y
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_EFIVAR_FS=y
+CONFIG_EFI=y
+CONFIG_EXTCON_USB_GPIO=y
+CONFIG_HIDRAW=y
+CONFIG_INPUT_EVBUG=m
+CONFIG_INPUT_GPIO=y
+CONFIG_INPUT_KEYRESET=y
+CONFIG_INPUT_TABLET=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+# CONFIG_MSM_JTAGV8 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_QCOM_CPUSS_DUMP=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_QUP=y
+CONFIG_SPMI_MSM_PMIC_ARB_DEBUG=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_UFS_FAULT_INJECTION=y
+CONFIG_USB_SERIAL=y
+CONFIG_XZ_DEC=y
+
+

arch/arm64/configs/vendor/ext_config/debug-bengal-arm64.config

@@ -0,0 +1,24 @@
+#
+# Please avoid changing the Qualcomm defconfig files and use this file to
+# add any Motorola-specific configuration changes that are applicable to
+# userdebug, eng, and user builds.
+#
+# After building, a list of all of the config files that are used can be found
+# at the top of:
+# out/target/product/$(PRODUCT)/obj/KERNEL_OBJ/mapphone_defconfig
+#
+# The actual output of the kernel configuration system can be found at:
+# out/target/product/$(PRODUCT)/obj/KERNEL_OBJ/.config
+#
+# You can check the .config file to verify that your configuration option is
+# being set as expected.
+#
+CONFIG_ARM64_STRICT_BREAK_BEFORE_MAKE=y
+CONFIG_EDAC_CORTEX_ARM64_DBE_IRQ_ONLY=y
+CONFIG_EDAC_CORTEX_ARM64_PANIC_ON_UE=y
+CONFIG_EDAC_CORTEX_ARM64=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_PAGE_POISONING=y
+CONFIG_PRINT_VMEMLAYOUT=y
+CONFIG_SCSI_UFSHCD_CMD_LOGGING=y
+CONFIG_KPROBES=y

arch/arm64/configs/vendor/ext_config/debug-bengal.config

@@ -21,20 +21,15 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_DEBUG_BLK_CGROUP=y
 CONFIG_CGROUP_DEBUG=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_PRINT_VMEMLAYOUT=y
 CONFIG_PM_DEBUG=y
 CONFIG_CLEANCACHE=y
 CONFIG_CMA_DEBUG=y
 CONFIG_CMA_ALLOW_WRITE_DEBUGFS=y
 CONFIG_L2TP_DEBUGFS=y
-CONFIG_SCSI_UFSHCD_CMD_LOGGING=y
 CONFIG_SERIAL_MSM_GENI_CONSOLE=y
 CONFIG_TTY_PRINTK=y
 CONFIG_MMC_IPC_LOGGING=y
 CONFIG_EDAC=y
-CONFIG_EDAC_CORTEX_ARM64=y
-CONFIG_EDAC_CORTEX_ARM64_DBE_IRQ_ONLY=y
-CONFIG_EDAC_CORTEX_ARM64_PANIC_ON_UE=y
 CONFIG_QCOM_GPI_DMA_DEBUG=y
 CONFIG_IOMMU_TLBSYNC_DEBUG=y
 CONFIG_ARM_SMMU_TESTBUS_DUMP=y
@@ -76,18 +71,16 @@ CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_QCOM_RTB=y
 CONFIG_QCOM_RTB_SEPARATE_CPUS=y
-CONFIG_FUNCTION_TRACER=y
 CONFIG_PREEMPTIRQ_EVENTS=y
 CONFIG_IRQSOFF_TRACER=y
 CONFIG_PREEMPT_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_MEMTEST=y
+CONFIG_SCSI_LOGGING=y
 CONFIG_BUG_ON_DATA_CORRUPTION=y
 CONFIG_PANIC_ON_DATA_CORRUPTION=y
 CONFIG_PID_IN_CONTEXTIDR=y
-CONFIG_ARM64_STRICT_BREAK_BEFORE_MAKE=y
 CONFIG_CORESIGHT_SOURCE_ETM4X=y
-# CONFIG_BFQ_GROUP_IOSCHED is not set
 CONFIG_SUSPEND_DEBUG=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_THERMAL_EMULATION=y