duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
ce854f4beea06597d9da154865e406489b48d31b
android_kernel_motorola_sm6225/qcom
T
History
tnlizd ce854f4bee arm64/config: add debug support for cap sensor 
Capri: sx9338 sar sensor
load reference phase config from dts

Change-Id: I1b639595fd86b0fbf3ed5d2872f52233cd4aa476
Signed-off-by: tnlizd <tnlizd@motorola.com>
Reviewed-on: https://gerrit.mot.com/1790959
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
2023-05-31 17:01:02 -03:00
..
bengal-1gb.dts
…
bengal-2gb.dts
…
bengal-audio-overlay.dtsi
ARM: dts: msm: reorder the dtsi for lpi entries on bengal
2020-07-02 09:16:53 +05:30
bengal-audio.dtsi
ARM: dts: msm: reorder the dtsi for lpi entries on bengal
2020-07-02 09:16:53 +05:30
bengal-borneo-audio-overlay.dtsi
arm/dts: update aw882xx driver to v0.1.10
2023-05-31 17:01:01 -03:00
bengal-borneo-common-overlay.dtsi
arm/dt: update upper limit capacity to 65
2023-05-31 17:01:02 -03:00
bengal-borneo-display.dtsi
arm/dt: borneo: change default status of wled i2c pin
2023-05-31 17:01:01 -03:00
bengal-borneo-dvt1-overlay.dts
arm64/dt: borneo: add DVT1 dts
2023-05-31 17:01:01 -03:00
bengal-borneo-dvt2-overlay.dts
arm64/dts:support 3 channels on DVT2 for borneo
2023-05-31 17:01:01 -03:00
bengal-borneo-evb-overlay.dts
arm/dt: borneo: set max current to 25ma
2023-05-31 17:01:01 -03:00
bengal-borneo-evt-overlay.dts
arm/dt: borneo: change wled aw99703 max current to 21mA
2023-05-31 17:01:01 -03:00
bengal-borneo-fps.dtsi
arm64/dts:modify FPS dts config for Borneo
2023-05-31 17:01:00 -03:00
bengal-borneo-moto-thermal.dtsi
therm:config NTC for bornr NA
2023-05-31 17:01:00 -03:00
bengal-borneo-touchscreen-overlay.dtsi
arm/dt: borneo: set spi clk to low as default
2023-05-31 17:01:01 -03:00
bengal-bus.dtsi
…
bengal-capri-awinic-audio-overlay.dtsi
arm/dts: Capri/+: enable aw882xx volume fade
2023-05-31 17:01:02 -03:00
bengal-capri-charge-5000-overlay.dtsi
adjust fcc current to 2.4A for Capri 5000.
2023-05-31 17:01:02 -03:00
bengal-capri-charge-6000-overlay.dtsi
arm64/dts:Capri/Capri+ charging bring up.
2023-05-31 17:01:02 -03:00
bengal-capri-common-overlay.dtsi
arm64/config: add debug support for cap sensor
2023-05-31 17:01:02 -03:00
bengal-capri-display.dtsi
arm/dts: Capri: txd/tm mipi clk update
2023-05-31 17:01:02 -03:00
bengal-capri-dvt2-overlay.dts
arm64/dts: HBM gpio support on DVT2
2023-05-31 17:01:02 -03:00
bengal-capri-dvt2-sku5-overlay.dts
arm64/dts: HBM gpio support on DVT2
2023-05-31 17:01:02 -03:00
bengal-capri-evt-overlay.dts
arm64/dts:Capri/Capri+ charging bring up.
2023-05-31 17:01:02 -03:00
bengal-capri-evt-sku5-overlay.dts
arm64/dts:Capri/Capri+ charging bring up.
2023-05-31 17:01:02 -03:00
bengal-capri-fps.dtsi
Capri:Add support for Chipone FPS
2023-05-31 17:01:02 -03:00
bengal-capri-hbm-display.dtsi
arm64/dts: HBM gpio support on DVT2
2023-05-31 17:01:02 -03:00
bengal-capri-moto-thermal.dtsi
arm/dts: init device tree for capri
2023-05-31 17:01:02 -03:00
bengal-capri-pinctrl-overlay.dtsi
arm64/dts: capri/capri+ change nfc gpios setting
2023-05-31 17:01:02 -03:00
bengal-capri-touchscreen-overlay.dtsi
Capri: 3rd tianma panel iliteck touch support
2023-05-31 17:01:02 -03:00
bengal-caprip-common-overlay.dtsi
arm64/dts: sar sensor bring up - update parameter v9
2023-05-31 17:01:02 -03:00
bengal-caprip-dvt2-overlay.dts
arm64/dts: HBM gpio support on DVT2
2023-05-31 17:01:02 -03:00
bengal-caprip-evt-overlay.dts
arm/dts: Caprip audio configuration
2023-05-31 17:01:02 -03:00
bengal-caprip-touchscreen-overlay.dtsi
Capri: 3rd tianma panel iliteck touch support
2023-05-31 17:01:02 -03:00
bengal-cebu-awinic-audio-overlay.dtsi
arm/dts: update aw882xx driver to v0.1.10
2023-05-31 17:01:01 -03:00
bengal-cebu-common-overlay.dtsi
arm/dt: update upper limit capacity to 65
2023-05-31 17:01:02 -03:00
bengal-cebu-display.dtsi
arm/dts: cebu dsbj panel mipi clk update for RF
2023-05-31 17:01:02 -03:00
bengal-cebu-evt-overlay.dts
arm/dts: Cebu audio configuration
2023-05-31 17:01:01 -03:00
bengal-cebu-fps.dtsi
Cebu: Support Chipone FPS on Cebu
2023-05-31 17:01:01 -03:00
bengal-cebu-moto-thermal.dtsi
arm/dts:config NTC therm for cebu.
2023-05-31 17:01:01 -03:00
bengal-cebu-touchscreen-overlay.dtsi
arm/dts: cebu:TP: enable nova usb charger detection
2023-05-31 17:01:01 -03:00
bengal-coresight.dtsi
ARM: dts: msm: add cti data for etf
2021-05-19 04:35:31 -07:00
bengal-gdsc.dtsi
…
bengal-gpu.dtsi
ARM: dts: msm: Add apb_pclk to GPU clock list for Bengal
2020-12-07 21:48:42 +05:30
bengal-guam-audio-overlay.dtsi
arm/dts:Add aw882xx config for guam/guamp
2023-05-31 17:01:00 -03:00
bengal-guam-awinic-audio-overlay.dtsi
arm/dts: update aw882xx driver to v0.1.10
2023-05-31 17:01:01 -03:00
bengal-guam-common-overlay.dtsi
dts:integrate india local buy battery profile
2023-05-31 17:01:02 -03:00
bengal-guam-display.dtsi
arm/dts: panel: enable tianma ili9882n panel esd check
2023-05-31 17:01:02 -03:00
bengal-guam-dvt2-overlay.dts
arm/dts: panel: compatible with DVT1, DVT2 (SUK1, SKU3, SKU4)
2023-05-31 17:01:00 -03:00
bengal-guam-dvt-overlay.dts
arm/dts:Add aw882xx config for guam/guamp
2023-05-31 17:01:00 -03:00
bengal-guam-evt-overlay.dts
arm/dts:Add aw882xx config for guam/guamp
2023-05-31 17:01:00 -03:00
bengal-guam-fps.dtsi
arm64/dts: add fpc1520 dts for guam
2023-05-31 17:01:00 -03:00
bengal-guam-moto-thermal.dtsi
dts:remove backlight cooling device
2023-05-31 17:01:00 -03:00
bengal-guam-touchscreen-overlay.dtsi
arm64/dts: input add touch ili9882n support
2023-05-31 17:01:01 -03:00
bengal-guamna-awinic-audio-overlay.dtsi
arm/dts: update aw882xx driver to v0.1.10
2023-05-31 17:01:01 -03:00
bengal-guamna-common-overlay.dtsi
arm/dt: update upper limit capacity to 65
2023-05-31 17:01:02 -03:00
bengal-guamna-display.dtsi
arm/dts: panel: enable tianma ili9882n panel esd check
2023-05-31 17:01:02 -03:00
bengal-guamna-dvt2-overlay.dts
arm/dts: panel: enable hbm for guam na
2023-05-31 17:01:01 -03:00
bengal-guamna-evt-overlay.dts
arm/dts:Enable afe profile config for GuamNA
2023-05-31 17:01:01 -03:00
bengal-guamna-gwlc-dvt2-overlay.dts
arm/dts: panel: enable hbm for guam na
2023-05-31 17:01:01 -03:00
bengal-guamna-gwlc-evt-overlay.dts
arm/dts:Enable afe profile config for GuamNA
2023-05-31 17:01:01 -03:00
bengal-guamna-moto-thermal.dtsi
dts:remove backlight cooling device
2023-05-31 17:01:00 -03:00
bengal-guamna-pinctrl-overlay.dtsi
arm/dts: enable tps61280 boost ic for guamna
2023-05-31 17:01:00 -03:00
bengal-guamp-common-overlay.dtsi
dts:integrate india local buy battery profile
2023-05-31 17:01:02 -03:00
bengal-guamp-dvt2-sku3-overlay.dts
arm/dts: panel: compatible with DVT1, DVT2 (SUK1, SKU3, SKU4)
2023-05-31 17:01:00 -03:00
bengal-guamp-dvt2-sku4-overlay.dts
arm/dts: panel: compatible with DVT1, DVT2 (SUK1, SKU3, SKU4)
2023-05-31 17:01:00 -03:00
bengal-guamp-dvt-overlay.dts
arm/dts: sar sensor power is always on
2023-05-31 17:01:00 -03:00
bengal-guamp-evt-overlay.dts
arm/dts:Add aw882xx config for guam/guamp
2023-05-31 17:01:00 -03:00
bengal-guamp-pvt-overlay.dts
arm64/dts: Add dtsi for enable HBM at pvt of guamp
2023-05-31 17:01:01 -03:00
bengal-hbm-display.dtsi
arm/dts: panel: enable tm ili9882n panel hbm
2023-05-31 17:01:02 -03:00
bengal-idp-1gb-overlay.dts
…
bengal-idp-1gb.dts
…
bengal-idp-2gb-overlay.dts
…
bengal-idp-2gb.dts
…
bengal-idp-low-ram.dtsi
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-idp-nopmi-overlay.dts
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-idp-nopmi.dts
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-idp-nopmi.dtsi
ARM: dts: msm: Remove extcon from Bangal nopmi
2021-04-07 19:02:10 +05:30
bengal-idp-overlay.dts
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-idp-pmi632.dtsi
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-idp-usbc-1gb-overlay.dts
…
bengal-idp-usbc-1gb.dts
…
bengal-idp-usbc-2gb-overlay.dts
…
bengal-idp-usbc-2gb.dts
…
bengal-idp-usbc-overlay.dts
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-idp-usbc.dts
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-idp-usbc.dtsi
…
bengal-idp.dts
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-idp.dtsi
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-ion.dtsi
…
bengal-iot-2gb.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp-2gb-overlay.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp-2gb.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp-low-ram.dtsi
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp-overlay.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp-usbc-2gb-overlay.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp-usbc-2gb.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp-usbc-overlay.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp-usbc.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp-usbc.dtsi
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot-idp.dtsi
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-iot-low-ram.dtsi
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengal-iot.dtsi
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-leds-aw99703.dtsi
arm/dt: leds: set wled max current to 25mA
2023-05-31 17:01:01 -03:00
bengal-leds-ktd3136.dtsi
arm/dts: Cebu ktd3136 backlight IC support
2023-05-31 17:01:01 -03:00
bengal-low-ram.dtsi
use low-ram dts for 32bit as widevine L1 is not supported
2023-05-31 17:01:01 -03:00
bengal-lpi.dtsi
…
bengal-moto-base-borneo.dts
therm:config NTC for bornr NA
2023-05-31 17:01:00 -03:00
bengal-moto-base-cebu.dts
arm/dts: Cebu: display panel update for ssc
2023-05-31 17:01:01 -03:00
bengal-moto-base-guamna.dts
arm/dts: GuamNA: modify guam na display configuration
2023-05-31 17:01:01 -03:00
bengal-moto-base.dts
arm/dts: GuamNA: add NA dts for unique config
2023-05-31 17:01:01 -03:00
bengal-moto-base.dtsi
import cdsp optimization for all targets by default, new memory map
2023-05-31 17:01:01 -03:00
bengal-moto-common-overlay.dtsi
arm64/dts: sdhci add vbias config
2023-05-31 17:01:02 -03:00
bengal-moto-low-ram-base-guamna.dts
use low-ram dts for 32bit as widevine L1 is not supported
2023-05-31 17:01:01 -03:00
bengal-moto-low-ram-base.dts
include low ram config on guamna
2023-05-31 17:01:00 -03:00
bengal-moto-low-ram-base.dtsi
use low-ram dts for 32bit as widevine L1 is not supported
2023-05-31 17:01:01 -03:00
bengal-pinctrl.dtsi
arm64/dts add touch support
2023-05-31 17:00:59 -03:00
bengal-pm.dtsi
…
bengal-pmi632.dtsi
ARM: dts: qcom: move charger skin-therm thermal zone to bengal-pmi632
2021-04-07 19:15:00 +05:30
bengal-qrd-nopmi.dtsi
ARM: dts: msm: Add Bengal QRD nopmi dtsi
2021-06-02 09:45:02 +08:00
bengal-qrd-overlay.dts
ARM: dts: msm: Add Bengal QRD nopmi dtsi
2021-06-02 09:45:02 +08:00
bengal-qrd-pmi632.dtsi
ARM: dts: msm: Add Bengal QRD nopmi dtsi
2021-06-02 09:45:02 +08:00
bengal-qrd.dts
ARM: dts: msm: Add Bengal QRD nopmi dtsi
2021-06-02 09:45:02 +08:00
bengal-qrd.dtsi
ARM: dts: msm: Add Bengal QRD nopmi dtsi
2021-06-02 09:45:02 +08:00
bengal-qupv3.dtsi
arm64/dts add touch support
2023-05-31 17:00:59 -03:00
bengal-regulator.dtsi
…
bengal-rumi-overlay.dts
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-rumi.dts
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-rumi.dtsi
…
bengal-sde-display.dtsi
ARM: dts: msm: update bias-voltage settings for display on bengal
2022-06-08 13:18:32 +05:30
bengal-sde-pll.dtsi
…
bengal-sde.dtsi
…
bengal-stub-regulator.dtsi
…
bengal-thermal-overlay.dtsi
dts:config BCL devicetree
2023-05-31 17:01:01 -03:00
bengal-thermal-pmi632-overlay.dtsi
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengal-thermal.dtsi
ARM: dts: msm: Enable rpm_smd cooling device for KHAJE
2021-08-26 09:20:38 -07:00
bengal-usb.dtsi
ARM: dts: msm: update bandwidth vote to nominal values for bengal
2022-09-30 20:52:03 +05:30
bengal-vidc.dtsi
ARM: dts: msm: Update max bus vote range for Bengal
2021-03-31 18:02:18 +05:30
bengal.dts
…
bengal.dtsi
arm/dts:Add dts config for audio PA
2023-05-31 17:01:00 -03:00
bengalp-idp-overlay.dts
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengalp-idp.dts
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengalp-iot-2gb.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp-2gb-overlay.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp-2gb.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp-low-ram.dtsi
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp-overlay.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp-usbc-2gb-overlay.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp-usbc-2gb.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp-usbc-overlay.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp-usbc.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp-usbc.dtsi
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot-idp.dtsi
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengalp-iot-low-ram.dtsi
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot.dts
ARM: dts: msm: Add initial dts support for bengal-iot
2020-07-27 13:19:51 +05:30
bengalp-iot.dtsi
ARM: dts: msm: Add DT support for Bengal nopmi
2021-04-05 15:37:50 +05:30
bengalp.dts
…
bengalp.dtsi
…
carrier-channel-ids.dtsi
- Create channel ID for Softbank Japan
2023-05-31 17:01:02 -03:00
dsi-adv7533-720p.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
dsi-adv7533-1080p.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
dsi-panel-arglass-seeya-dual-1080p-90hz-video.dtsi
ARM: dts: msm: Renaming seeya panels to 90Hz and 60Hz refresh rates
2022-03-03 16:15:11 -08:00
dsi-panel-arglass-seeya-dual-1080p-video.dtsi
ARM: dts: msm: Change persistence on AR Display
2022-04-24 09:38:59 -07:00
dsi-panel-edo-rm67162-qvga-cmd.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
dsi-panel-ext-bridge-4k-video.dtsi
ARM: dts: qcom: Add 4k HDMI display support for RB5
2020-05-15 18:07:26 +08:00
dsi-panel-ext-bridge-1080p.dtsi
…
dsi-panel-hx8394d-720p-video.dtsi
…
dsi-panel-hx8394f-720p-video.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
dsi-panel-hx8399c-fhd-plus-video.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
dsi-panel-hx8399c-hd-plus-video.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
dsi-panel-hx83112a-truly-singlemipi-fhd-video.dtsi
…
dsi-panel-icn9706-720-1440p-video.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
dsi-panel-lgd-incell-sw49106-fhd-video.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
dsi-panel-mot-djn-nt36525b-652-hdplus-vid-v0.dtsi
arm64/dts: capri djn panel init cmd optimize dimming
2023-05-31 17:01:02 -03:00
dsi-panel-mot-djn-nt36525b-652-hdplus-video.dtsi
arm64/dts: capri djn panel init cmd optimize dimming
2023-05-31 17:01:02 -03:00
dsi-panel-mot-djn-nt36525c-652-hdplus-vid.dtsi
arm64/dts: capri display driver init cmd update for backlight
2023-05-31 17:01:02 -03:00
dsi-panel-mot-dummy-qhd-video.dtsi
arm/dts: init guam dts
2023-05-31 17:00:59 -03:00
dsi-panel-mot-tianma-ili9882n-652-hdplus-vid.dtsi
arm64/dts: Capri: 3rd tianma display driver bringup
2023-05-31 17:01:02 -03:00
dsi-panel-mot-tm-ili9882n-652-hdplus-vid.dtsi
arm64/dts: Capri: 3rd tianma display driver bringup
2023-05-31 17:01:02 -03:00
dsi-panel-mot-txd-ili9882h-652-hdplus-vid.dtsi
arm64/dts: capri display driver init cmd update for backlight
2023-05-31 17:01:02 -03:00
dsi-panel-mot-txd-ili9882n-652-hdplus-vid.dtsi
arm64/dts: capri display driver init cmd update for backlight
2023-05-31 17:01:02 -03:00
dsi-panel-moto-ft8006s-dsbj-hdplus-video.dtsi
arm/dts: cebu dsbj panel mipi clk update for RF
2023-05-31 17:01:02 -03:00
dsi-panel-moto-hx83102d-hlt-hdplus-video.dtsi
arm/dts: panel: optimize panel timing for guam
2023-05-31 17:01:00 -03:00
dsi-panel-moto-icnl9911s-tm-hdplus-video.dtsi
arm/dts: panel: modify tianma icnl9911s panel init code
2023-05-31 17:01:02 -03:00
dsi-panel-moto-ili9881x-tm-hdplus-video.dtsi
arm/dt: borneo: Change panel physical size
2023-05-31 17:01:02 -03:00
dsi-panel-moto-ili9882h-hlt-hdplus-video.dtsi
arm/dts: panel: modify hlt ili9882h mipi clk for rf desense
2023-05-31 17:01:02 -03:00
dsi-panel-moto-ili9882n-tm-hdplus-video.dtsi
arm/dts: panel: add tianma ili9882n panel dtsi
2023-05-31 17:01:01 -03:00
dsi-panel-moto-nt36525b-djn-hdplus-video.dtsi
arm/dts: panel: add panel supplier name in panel dtsi
2023-05-31 17:01:00 -03:00
dsi-panel-moto-nt36525b-tm-hdplus-video.dtsi
arm/dts: cebu tianma panel seq update for pull down
2023-05-31 17:01:01 -03:00
dsi-panel-moto-nt36672a-djn-hdplus-video.dtsi
arm/dt: borneo: Change panel physical size
2023-05-31 17:01:02 -03:00
dsi-panel-nt35597-dualmipi-wqxga-cmd.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
dsi-panel-nt35597-dualmipi-wqxga-video.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
dsi-panel-nt35597-truly-dsc-wqxga-cmd.dtsi
…
dsi-panel-nt35597-truly-dsc-wqxga-video.dtsi
…
dsi-panel-nt35597-truly-dualmipi-wqxga-cmd.dtsi
ARM: dts: msm: update settings for nt35597 truly panels
2020-07-21 12:21:35 +05:30
dsi-panel-nt35597-truly-dualmipi-wqxga-video.dtsi
ARM: dts: msm: update settings for nt35597 truly panels
2020-07-21 12:21:35 +05:30
dsi-panel-nt35695b-truly-fhd-cmd.dtsi
…
dsi-panel-nt35695b-truly-fhd-video.dtsi
…
dsi-panel-nt36525-truly-hd-plus-vid.dtsi
ARM: dts: msm: move porch setting into panel dts
2020-08-10 11:17:10 +08:00
dsi-panel-nt36672e-fhd-plus-60hz-video.dtsi
ARM: dts: msm: add NT36672E panel support on kona
2021-10-22 02:48:32 -07:00
dsi-panel-nt36672e-fhd-plus-90hz-video.dtsi
ARM: dts: msm: Add NT36672E 90hz Video Mode Panel
2021-04-30 11:16:19 +05:30
dsi-panel-nt36672e-fhd-plus-120hz-video.dtsi
ARM: dts: msm: Add NT36672E 120fps video mode panel on khaje IDP
2021-09-21 02:00:19 -07:00
dsi-panel-nt36850-truly-dualmipi-wqhd-cmd.dtsi
ARM: dts: msm: Enable QRD nt36850-truly panel
2021-06-14 18:43:04 +05:30
dsi-panel-r66451-dsc-fhd-plus-60hz-cmd.dtsi
…
dsi-panel-r66451-dsc-fhd-plus-60hz-video.dtsi
…
dsi-panel-r66451-dsc-fhd-plus-90hz-cmd.dtsi
…
dsi-panel-r66451-dsc-fhd-plus-90hz-video.dtsi
…
dsi-panel-r66451-dsc-fhd-plus-120hz-cmd.dtsi
ARM: dts: msm: fix the ESD check error for r66451 panel
2020-08-28 00:19:14 -07:00
dsi-panel-r66451-dsc-fhd-plus-120hz-video.dtsi
ARM: dts: msm: add panel physical dimension for r66451 panel
2020-06-05 16:22:10 +08:00
dsi-panel-r66451-dsc-fhd-plus-144hz-cmd.dtsi
ARM: dts: msm: Add r66451 144fps panel support
2020-08-18 02:25:48 -07:00
dsi-panel-r66451-hd-plus-90hz-cmd.dtsi
ARM: dts: msm: Add 90fps panel support on bengal
2020-07-13 23:39:23 -07:00
dsi-panel-r66451-hd-plus-90hz-video.dtsi
ARM: dts: msm: Add 90fps panel support on bengal
2020-07-13 23:39:23 -07:00
dsi-panel-r69006-1080p-cmd.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
dsi-panel-r69006-1080p-video.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
dsi-panel-rm67195-amoled-fhd-cmd.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
dsi-panel-rm69299-visionox-fhd-plus-cmd.dtsi
ARM: dts: msm: Add support for AOD on lagoon
2020-06-16 21:50:59 -07:00
dsi-panel-rm69299-visionox-fhd-plus-video.dtsi
ARM: dts: msm: Add support for AOD on lagoon
2020-06-16 21:50:59 -07:00
dsi-panel-s6e3ha3-amoled-dualmipi-wqhd-cmd.dtsi
…
dsi-panel-sharp-1080p-cmd.dtsi
…
dsi-panel-sharp-dsc-4k-cmd.dtsi
…
dsi-panel-sharp-dsc-4k-video.dtsi
…
dsi-panel-sharp-dualdsi-wqhd-cmd.dtsi
…
dsi-panel-sharp-dualdsi-wqhd-video.dtsi
…
dsi-panel-sharp-dualmipi-1080p-120hz.dtsi
…
dsi-panel-sharp-dualmipi-wqxga-video.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
dsi-panel-sharp-qsync-fhd-cmd.dtsi
…
dsi-panel-sharp-qsync-fhd-video.dtsi
ARM: dts: msm: Enable POMS feature for qsync panel on lagoon
2020-05-07 19:34:58 +05:30
dsi-panel-sharp-qsync-wqhd-cmd.dtsi
…
dsi-panel-sharp-qsync-wqhd-video.dtsi
…
dsi-panel-sim-cmd.dtsi
…
dsi-panel-sim-dsc375-cmd.dtsi
…
dsi-panel-sim-dsc-10bit-cmd.dtsi
…
dsi-panel-sim-dualmipi-cmd.dtsi
…
dsi-panel-sim-dualmipi-dsc375-cmd.dtsi
…
dsi-panel-sim-dualmipi-video.dtsi
…
dsi-panel-sim-sec-hd-cmd.dtsi
…
dsi-panel-sim-video.dtsi
…
dsi-panel-sw43404-amoled-dsc-fhd-plus-cmd.dtsi
…
dsi-panel-sw43404-amoled-dsc-wqhd-cmd.dtsi
…
dsi-panel-sw43404-amoled-dsc-wqhd-video.dtsi
…
dsi-panel-td4328-1080p-cmd.dtsi
…
dsi-panel-td4328-1080p-video.dtsi
…
dsi-panel-td4330-truly-v2-singlemipi-fhd-cmd.dtsi
…
dsi-panel-td4330-truly-v2-singlemipi-fhd-vid.dtsi
…
dsi-panel-truly-720p-cmd.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
dsi-panel-truly-720p-video.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
dsi-panel-truly-1080p-cmd.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
dsi-panel-truly-1080p-video.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
dsi-panel-xrsmrtvwr-jdi-dual-video.dtsi
ARM: dts: msm: enable esd check for xr sku4 platform
2023-02-02 10:04:08 +08:00
fg-gen3-batterydata-ascent-3450mah.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
fg-gen3-batterydata-I13Z5P-680mAh.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
fg-gen3-batterydata-itech-3000mah.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
fg-gen3-batterydata-qrd-skuk-4v4-3000mah.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
fg-gen4-batterydata-alium-3600mah.dtsi
…
fg-gen4-batterydata-ascent-3450mah.dtsi
…
fg-gen4-batterydata-atl466274-3650mah.dtsi
…
fg-gen4-batterydata-goertek-650mah.dtsi
ARM: dts: qcom: add battery fg profile for ar-glass
2021-10-14 18:11:28 -07:00
fg-gen4-batterydata-goertek-6100mah.dtsi
ARM: dts: msm: Update battery profile for XR ref device
2020-10-06 13:27:24 -07:00
fg-gen4-batterydata-mlp466274-3650mah.dtsi
…
ipcc-test-lagoon.dtsi
…
ipcc-test-lito.dtsi
…
ipcc-test.dtsi
…
khaje-atp-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-atp.dts
ARM: dts: msm: Add pmic-id tuple for Khaje platforms
2021-07-15 21:24:17 +05:30
khaje-atp.dtsi
ARM: dts: msm: Add audio support on Khaje ATP
2021-11-08 12:34:05 +05:30
khaje-idp-nopmi-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-idp-nopmi.dts
ARM: dts: msm: Update board-id for Khaje IDP and IDP nopmi
2021-07-16 22:37:57 +05:30
khaje-idp-nopmi.dtsi
ARM: dts: msm: Add display DT node for khaje target
2021-06-22 03:55:54 -07:00
khaje-idp-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-idp-pm7250b.dtsi
ARM: dts: msm: Add NT36672E 120fps video mode panel on khaje IDP
2021-09-21 02:00:19 -07:00
khaje-idp-pm8010-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-idp-pm8010.dts
ARM: dts: msm: Add device tree support for PM8010
2021-09-01 17:17:55 +05:30
khaje-idp-pm8010.dtsi
ARM: dts: msm: Enable 400Khz i2c bus frequency for PM8010
2021-09-27 11:13:44 +05:30
khaje-idp-usbc-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-idp-usbc.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-idp-usbc.dtsi
ARM: dts: msm: Add dt files for Khaje AATC
2021-07-30 05:14:26 -07:00
khaje-idp.dts
ARM: dts: msm: Update board-id for Khaje IDP and IDP nopmi
2021-07-16 22:37:57 +05:30
khaje-idp.dtsi
ARM: dts: msm: Add NT36672E 120fps video mode panel on khaje IDP
2021-09-21 02:00:19 -07:00
khaje-idps-display-90hz-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-idps-display-90hz.dts
ARM: dts: msm: Add pmic-id tuple for Khaje platforms
2021-07-15 21:24:17 +05:30
khaje-idps-display-90hz.dtsi
ARM: dts: msm: Add display DT node for khaje target
2021-06-22 03:55:54 -07:00
khaje-pinctrl.dtsi
ARM: dts: msm: Add support for flash tioman gpio for khaje
2021-07-26 01:56:47 -07:00
khaje-pm7250b.dtsi
ARM: dts: msm: Enable KPDPWR status logging
2021-12-21 14:11:12 +05:30
khaje-qrd-hvdcp3p5-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-qrd-hvdcp3p5.dts
ARM: dts: msm: add SMB_STAT pin configuration for khaje-qrd-hvdcp3p5
2021-09-17 14:52:47 +08:00
khaje-qrd-hvdcp3p5.dtsi
ARM: dts: msm: add SMB_STAT pin configuration for khaje-qrd-hvdcp3p5
2021-09-17 14:52:47 +08:00
khaje-qrd-nopmi-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-qrd-nopmi.dts
ARM: dts: msm: Add nopmi support for khaje qrd
2021-06-22 21:06:06 -07:00
khaje-qrd-nopmi.dtsi
ARM: dts: msm: Add nopmi support for khaje qrd
2021-06-22 21:06:06 -07:00
khaje-qrd-nowcd9375-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-qrd-nowcd9375.dts
ARM: dts: msm: add SMB_STAT pin configuration for khaje-qrd-hvdcp3p5
2021-09-17 14:52:47 +08:00
khaje-qrd-nowcd9375.dtsi
ARM: dts: qcom: disable wcd on QRD khaje SKUs without WCD
2021-08-24 20:07:20 -07:00
khaje-qrd-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-08-25 21:57:25 +05:30
khaje-qrd-pm7250b.dtsi
ARM: dts: msm: Modify quiet-therm node name for Khaje QRD
2021-11-16 16:00:04 +08:00
khaje-qrd.dts
ARM: dts: msm: Add initial device tree for khaje QRD
2021-06-02 09:45:48 +08:00
khaje-qrd.dtsi
ARM: dts: msm: Modify quiet-therm node name for Khaje QRD
2021-11-16 16:00:04 +08:00
khaje-regulator.dtsi
ARM: dts: msm: Add the refgen node for khaje
2021-06-21 10:55:35 +05:30
khaje-sde-display.dtsi
ARM: dts: msm: add support to notify scheduler for NT36672E 120fps panel
2021-09-29 00:08:09 -07:00
khaje-sde-pll.dtsi
ARM: dts: msm: Fix reg-names of dsi pll for khaje target
2021-07-10 19:36:59 +05:30
khaje-sde.dtsi
ARM: dts: msm: increase mdp and lut clocks for khaje target
2021-12-31 15:00:06 +05:30
khaje-thermal-pm7250b-overlay.dtsi
ARM: dts: qcom: Add pm7250b thermal zone mitigations for khaje
2021-06-16 10:18:48 -07:00
khaje-usb.dtsi
ARM: dts: msm: Remove pm-qos votes from Khaje USB
2021-09-28 15:58:24 +05:30
khaje.dts
ARM: dts: msm: Add initial device tree for khaje
2021-04-19 18:01:21 +05:30
khaje.dtsi
ARM: dts: msm: Add cluster ID to core hang DT node
2022-10-02 21:41:51 -07:00
khajeg-atp-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-atp.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-atp.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp-nopmi-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp-nopmi.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp-nopmi.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp-pm8010-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp-pm8010.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp-pm8010.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp-usbc-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp-usbc.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp-usbc.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idp.dtsi
ARM: dts: qcom: Disabling camera nodes for khajeg
2022-08-29 22:53:31 -07:00
khajeg-idps-display-90hz-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idps-display-90hz.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-idps-display-90hz.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd-hvdcp3p5-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd-hvdcp3p5.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd-hvdcp3p5.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd-nopmi-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd-nopmi.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd-nopmi.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd-nowcd9375-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd-nowcd9375.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd-nowcd9375.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg-qrd.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-08-26 15:17:01 +05:30
khajeg.dtsi
ARM: dts: msm: disable IPA entry for khaje APQ gaming targets
2022-08-30 00:50:07 -07:00
khajep-atp-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-atp.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-atp.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp-nopmi-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp-nopmi.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp-nopmi.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp-pm8010-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp-pm8010.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp-pm8010.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp-usbc-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp-usbc.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp-usbc.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idp.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idps-display-90hz-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idps-display-90hz.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-idps-display-90hz.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd-hvdcp3p5-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd-hvdcp3p5.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd-hvdcp3p5.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd-nopmi-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd-nopmi.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd-nopmi.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd-nowcd9375-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd-nowcd9375.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd-nowcd9375.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep-qrd.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajep.dtsi
ARM: dts: msm: disable IPA entry for khaje APQ targets
2022-03-09 16:23:01 +05:30
khajeq-atp-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-atp.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-atp.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp-nopmi-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp-nopmi.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp-nopmi.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp-pm8010-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp-pm8010.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp-pm8010.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp-usbc-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp-usbc.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp-usbc.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idp.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idps-display-90hz-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idps-display-90hz.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-idps-display-90hz.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd-hvdcp3p5-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd-hvdcp3p5.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd-hvdcp3p5.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd-nopmi-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd-nopmi.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd-nopmi.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd-nowcd9375-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd-nowcd9375.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd-nowcd9375.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd-overlay.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq-qrd.dtsi
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq.dts
ARM: dts: qcom: Add apq variant device tree support to Khaje
2022-02-22 10:58:25 +05:30
khajeq.dtsi
ARM: dts: msm: disable IPA entry for khaje APQ targets
2022-03-09 16:23:01 +05:30
kona-7230-iot-cpu.dtsi
ARM: dts: msm: Add initial dts support for KONA-7230
2022-07-01 02:35:16 +05:30
kona-7230-iot-rb5.dts
ARM: dts: msm: Add initial dts support for KONA-7230
2022-07-01 02:35:16 +05:30
kona-7230-iot-rb5.dtsi
ARM: dts: msm: disable splash and rdump region for 7230
2022-09-09 14:06:17 -07:00
kona-7230-iot-v2.1.dtsi
Revert "ARM: dts: msm: Add GPU pwrlevels for KONA-7230"
2022-11-24 20:27:42 -08:00
kona-7230m-iot-rb5.dts
ARM: dts: msm: Add initial dts support for KONA-7230
2022-07-01 02:35:16 +05:30
kona-7230m-iot-rb5.dtsi
ARM: dts: msm: Add initial dts support for KONA-7230
2022-07-01 02:35:16 +05:30
kona-arglass-overlay.dts
ARM: dts: qcom: Add support for Kona AR Glass reference platform
2021-07-09 10:56:45 -07:00
kona-arglass.dts
ARM: dts: qcom: Add support for Kona AR Glass reference platform
2021-07-09 10:56:45 -07:00
kona-arglass.dtsi
ARM: dts: qcom: Add second trip to skin-msm-therm-usr for sxr2130
2022-08-25 19:13:38 +08:00
kona-audio-ar.dtsi
ARM: dts: qcom: Add support for AudioReach on kona
2021-10-08 18:59:59 +05:30
kona-audio-overlay-ar.dtsi
ARM: dts: msm: add support for mi2s and tdm
2021-10-13 18:17:56 +05:30
kona-audio-overlay.dtsi
ARM: dts: msm: Update swr master version
2021-03-30 11:35:18 +05:30
kona-audio.dtsi
…
kona-bus.dtsi
…
kona-cdp-lcd-overlay.dts
…
kona-cdp-lcd-tron-overlay.dts
ARM: dts: msm: Add devicetree files for Tron board of Kona
2021-10-25 04:16:55 -07:00
kona-cdp-lcd-tron.dts
ARM: dts: msm: Disable NFC dt entries on Tron
2022-03-15 11:00:17 +05:30
kona-cdp-lcd.dts
…
kona-cdp-lcd.dtsi
ARM: dts: msm: add NT36672E panel support on kona
2021-10-22 02:48:32 -07:00
kona-cdp-overlay.dts
…
kona-cdp.dts
…
kona-cdp.dtsi
Merge "ARM: dts: msm: add NT36672E panel support on kona"
2021-10-27 03:26:32 -07:00
kona-coresight.dtsi
ARM: dts: msm: modify the reg to different value
2020-07-01 11:57:09 +08:00
kona-cvp.dtsi
ARM: dts: msm: Enable CVP SMMU fault tolerance and Stall disable
2022-03-31 12:17:55 +05:30
kona-gpu.dtsi
ARM: dts: msm: Add tzone-names for kona GPU
2021-01-29 20:53:41 +09:00
kona-hdk-overlay.dts
…
kona-hdk.dts
…
kona-hdk.dtsi
ARM: dts: msm: set qupv3 se1 i2c rate to 100khz
2021-02-25 18:17:23 -08:00
kona-ion.dtsi
…
kona-iot-rb5-audio.dtsi
…
kona-iot-v2.1.dtsi
ARM: dts: msm: Configure PCIE2 for I210 Ethernet card
2022-08-10 04:27:06 -07:00
kona-lpi-ar.dtsi
ARM: dts: qcom: Add support for AudioReach on kona
2021-10-08 18:59:59 +05:30
kona-lpi.dtsi
…
kona-mhi.dtsi
…
kona-mtp-overlay.dts
…
kona-mtp-sa.dts
ARM: dts: msm: add support for kona standalone
2020-09-09 22:30:52 -07:00
kona-mtp-ws-overlay.dts
…
kona-mtp-ws.dts
…
kona-mtp-ws.dtsi
…
kona-mtp.dts
…
kona-mtp.dtsi
ARM: dts: qcom: Add support for AudioReach on kona
2021-10-08 18:59:59 +05:30
kona-npu.dtsi
ARM: dts: msm: Add new property npu-dsp-sid-mapped for npu
2020-06-25 17:21:17 -04:00
kona-pcie.dtsi
ARM: dts: msm: Enable link recovery for config space access fail
2021-01-11 19:03:30 +05:30
kona-pinctrl.dtsi
ARM: dts: msm: Add gpio87 to PDC irq map for kona
2022-08-17 17:00:57 +05:30
kona-pm.dtsi
…
kona-pmic-overlay.dtsi
ARM: dts: qcom: add pm8150 gpio3 support
2020-07-29 22:55:10 -07:00
kona-qrd-overlay.dts
…
kona-qrd.dts
…
kona-qrd.dtsi
ARM: dts: qcom: Add second trip to skin-msm-therm-usr for kona
2020-12-23 23:47:51 -08:00
kona-qupv3.dtsi
ARM: dts: msm: Add qrc node
2021-02-17 17:52:40 -08:00
kona-regulators.dtsi
…
kona-rumi-overlay.dts
…
kona-rumi.dts
…
kona-rumi.dtsi
…
kona-sa-mtp-overlay.dts
ARM: dts: msm: add support for kona standalone
2020-09-09 22:30:52 -07:00
kona-sde-display.dtsi
ARM: dts: msm: Renaming seeya panels to 90Hz and 60Hz refresh rates
2022-03-03 16:15:11 -08:00
kona-sde-pll.dtsi
…
kona-sde.dtsi
Merge "ARM: dts: msm: add wb clk status for kona target"
2022-05-21 20:43:39 -07:00
kona-smp2p.dtsi
…
kona-thermal-overlay.dtsi
…
kona-thermal.dtsi
ARM: dts: msm: Add CX based mitigation thermal zone rules for kona
2020-06-23 22:32:42 +05:30
kona-usb.dtsi
ARM: dts: qcom: enable suspend to ram for kona HDK
2020-11-10 17:10:24 -08:00
kona-v2-arglass.dts
ARM: dts: qcom: Add support for Kona AR Glass reference platform
2021-07-09 10:56:45 -07:00
kona-v2-cdp.dts
…
kona-v2-gpu.dtsi
ARM: dts: msm: Add speedbin four support for QRB5165n
2021-06-24 05:00:31 -07:00
kona-v2-mtp-sa.dts
ARM: dts: msm: add support for kona standalone
2020-09-09 22:30:52 -07:00
kona-v2-mtp-ws.dts
…
kona-v2-mtp.dts
…
kona-v2-qrd.dts
…
kona-v2-rumi.dts
…
kona-v2-xrfusion-ult.dts
ARM: dts: msm: Update the subtype for Kona XR Ult as Overlay
2021-01-18 13:13:46 +05:30
kona-v2-xrfusion.dts
ARM: dts: msm: Update the subtype for Kona XR as Overlay
2020-12-15 10:56:23 +05:30
kona-v2-xrsku4.dts
ARM: dts: msm: Add support for XR SKU4 Standalone Ref Device
2022-02-11 08:34:23 -08:00
kona-v2.1-arglass.dts
ARM: dts: qcom: Add support for Kona AR Glass reference platform
2021-07-09 10:56:45 -07:00
kona-v2.1-cdp.dts
…
kona-v2.1-gpu.dtsi
…
kona-v2.1-hdk.dts
…
kona-v2.1-iot-rb5.dts
ARM: dts: msm: enable LDO11C for HDMI power supply for RB5
2020-06-24 16:49:34 +08:00
kona-v2.1-iot-rb5.dtsi
ARM: dts: msm: Configure PCIE2 for I210 Ethernet card
2022-08-10 23:53:25 -07:00
kona-v2.1-mtp-sa.dts
ARM: dts: msm: add support for kona standalone
2020-09-09 22:30:52 -07:00
kona-v2.1-mtp-ws.dts
…
kona-v2.1-mtp.dts
…
kona-v2.1-qrd.dts
…
kona-v2.1-xrfusion-ult.dts
ARM: dts: msm: Update the subtype for Kona XR Ult as Overlay
2021-01-18 13:13:46 +05:30
kona-v2.1-xrfusion.dts
ARM: dts: msm: Update the subtype for Kona XR as Overlay
2020-12-15 10:56:23 +05:30
kona-v2.1-xrsku4.dts
ARM: dts: msm: Add support for XR SKU4 Standalone Ref Device
2022-02-11 08:34:23 -08:00
kona-v2.1.dts
…
kona-v2.1.dtsi
…
kona-v2.dts
…
kona-v2.dtsi
…
kona-va-bolero-ar.dtsi
ARM: dts: qcom: Add support for AudioReach on kona
2021-10-08 18:59:59 +05:30
kona-va-bolero.dtsi
…
kona-vidc.dtsi
…
kona-xr-overlay.dts
…
kona-xr-pinctrl-overlay.dtsi
…
kona-xr.dts
…
kona-xr.dtsi
ARM: dts: qcom: Add second trip to skin-msm-therm-usr for sxr2130
2022-08-25 19:13:38 +08:00
kona-xrfusion-overlay.dts
…
kona-xrfusion-ult-overlay.dts
ARM: dts: qcom: Add support for Kona XR 5G UltraSound reference platform
2020-07-31 06:58:49 -07:00
kona-xrfusion-ult.dts
ARM: dts: msm: Update the subtype for Kona XR Ult as Overlay
2021-01-18 13:13:46 +05:30
kona-xrfusion-ult.dtsi
ARM: dts: qcom: Add second trip to skin-msm-therm-usr for sxr2130
2022-08-25 19:13:38 +08:00
kona-xrfusion.dts
ARM: dts: msm: Update the subtype for Kona XR as Overlay
2020-12-15 10:56:23 +05:30
kona-xrfusion.dtsi
ARM: dts: qcom: Add second trip to skin-msm-therm-usr for sxr2130
2022-08-25 19:13:38 +08:00
kona-xrsku4-overlay.dts
ARM: dts: msm: Add support for XR SKU4 Standalone Ref Device
2022-02-11 08:34:23 -08:00
kona-xrsku4.dts
ARM: dts: msm: Add support for XR SKU4 Standalone Ref Device
2022-02-11 08:34:23 -08:00
kona-xrsku4.dtsi
ARM: dts: msm: Add Dynamic FPS support for SKU4
2023-04-10 23:49:44 -07:00
kona.dts
…
kona.dtsi
ARM: dts: msm: Add configuration for ice driver in kona.dtsi
2022-07-29 15:21:13 +05:30
lagoon-atp-overlay.dts
…
lagoon-atp.dts
…
lagoon-atp.dtsi
ARM: dts: qcom: enable BCL and pmic alarm sensor mitigations for LAGOON
2020-07-05 21:02:54 +05:30
lagoon-audio-overlay.dtsi
ARM: dts: msm: Update swr master version
2021-03-30 11:35:18 +05:30
lagoon-audio.dtsi
ARM: dts: msm: add CPU dai for additional proxy ports for lagoon/scuba
2020-06-08 19:08:00 +05:30
lagoon-bus.dtsi
ARM: dts: msm: Update QoS settings for LAGOON
2020-04-22 00:57:41 -07:00
lagoon-cdp-overlay.dts
…
lagoon-cdp.dts
…
lagoon-cdp.dtsi
ARM: dts: msm: Update 144Hz display panel power supply
2020-08-28 10:37:28 -07:00
lagoon-coresight.dtsi
ARM: dts: msm: modify the reg to different value
2020-06-30 16:19:56 +08:00
lagoon-gdsc.dtsi
…
lagoon-gpu.dtsi
ARM: dts: msm: Update bus voting for NOM and NOM_L1 for lagoon GPU
2021-03-02 22:43:03 -08:00
lagoon-ion.dtsi
…
lagoon-lpi.dtsi
…
lagoon-mtp-overlay.dts
…
lagoon-mtp-usbc-overlay.dts
…
lagoon-mtp-usbc.dts
…
lagoon-mtp-usbc.dtsi
…
lagoon-mtp.dts
…
lagoon-mtp.dtsi
ARM: dts: qcom: enable BCL and pmic alarm sensor mitigations for LAGOON
2020-07-05 21:02:54 +05:30
lagoon-npu.dtsi
ARM: dts: msm: Correct npu property to qcom,npu-dsp-sid-mapped
2020-07-14 16:22:58 -04:00
lagoon-pinctrl.dtsi
ARM: dts: qcom: Add CCI3 to pinctrl
2020-07-27 13:16:42 +05:30
lagoon-pm.dtsi
…
lagoon-qrd-overlay.dts
…
lagoon-qrd.dts
…
lagoon-qrd.dtsi
ARM: dts: qcom: Add battery 10A mitigation level support for lagoon qrd
2020-08-04 06:34:40 -07:00
lagoon-qupv3.dtsi
…
lagoon-regulators.dtsi
ARM: dts: msm: Modify LDO12A "init-voltage" to 1.8V for lagoon
2020-08-11 05:19:43 -07:00
lagoon-rumi-overlay.dts
…
lagoon-rumi.dts
…
lagoon-rumi.dtsi
…
lagoon-sde-display.dtsi
ARM: dts: msm: add msm notifier for r66451 144 fps on lagoon
2020-09-06 23:34:16 -07:00
lagoon-sde-pll.dtsi
ARM: dts: msm: vote for the QLINK clk on lagoon
2020-07-02 02:59:10 -07:00
lagoon-sde.dtsi
ARM: dts: msm: update display BW limit values for lagoon
2021-03-31 12:19:47 +05:30
lagoon-stub-regulator.dtsi
…
lagoon-thermal-overlay.dtsi
ARM: dts: qcom: update cpu cooling map for pm6150l thermal zone for LAGOON
2020-07-05 21:04:31 +05:30
lagoon-thermal.dtsi
ARM: dts: qcom: enable modem tj thermal zone mitigations for lagoon
2021-03-20 00:34:14 +05:30
lagoon-usb.dtsi
ARM: dts: msm: Add refgen supply for QUSB2PHY on Lagoon
2020-07-02 06:32:14 -07:00
lagoon-vidc.dtsi
…
lagoon.dts
…
lagoon.dtsi
Merge "ARM: dts: msm: switch off kpti on some targets"
2020-09-23 07:52:54 -07:00
lito-atp-overlay.dts
…
lito-atp.dts
…
lito-atp.dtsi
ARM: dts: msm: Set UFS PX10 supply in LPM during RBSC
2020-11-24 18:13:09 +05:30
lito-audio-overlay.dtsi
ARM: dts: msm: Update swr master version
2021-03-30 11:35:18 +05:30
lito-audio.dtsi
…
lito-bus.dtsi
…
lito-cdp-overlay.dts
…
lito-cdp.dts
…
lito-cdp.dtsi
ARM: dts: msm: Set UFS PX10 supply in LPM during RBSC
2020-11-24 18:13:09 +05:30
lito-coresight.dtsi
ARM: dts: msm: modify the reg to different value
2020-06-30 16:08:27 +08:00
lito-gdsc.dtsi
ARM: dts: msm: Add skip-disable-before-sw-enable flag to gx_gdsc
2020-07-02 04:36:02 -07:00
lito-gpu.dtsi
ARM: dts: msm: Add tzone-names for lito GPU
2021-01-29 20:55:19 +09:00
lito-ion.dtsi
…
lito-lpi.dtsi
…
lito-mtp-overlay.dts
…
lito-mtp.dts
…
lito-mtp.dtsi
ARM: dts: msm: Set UFS PX10 supply in LPM during RBSC
2020-11-24 18:13:09 +05:30
lito-npu.dtsi
ARM: dts: msm: Correct npu property to qcom,npu-dsp-sid-mapped
2020-07-14 16:22:58 -04:00
lito-pinctrl.dtsi
…
lito-pm.dtsi
…
lito-pmic-overlay.dtsi
ARM: dts: qcom: Add second trip to xo-therm-usr for lito
2020-12-23 18:19:38 +08:00
lito-qrd-overlay.dts
…
lito-qrd.dts
…
lito-qrd.dtsi
ARM: dts: msm: Set UFS PX10 supply in LPM during RBSC
2020-11-24 18:13:09 +05:30
lito-qupv3.dtsi
ARM: dts: msm: Enable S1 in fastmap mode for litto
2020-10-22 09:36:59 +05:30
lito-regulators.dtsi
…
lito-rumi-overlay.dts
…
lito-rumi.dts
…
lito-rumi.dtsi
…
lito-sde-display.dtsi
ARM: dts: msm: enable qsync along with VRR in lito target
2020-11-23 13:36:52 +05:30
lito-sde-pll.dtsi
…
lito-sde.dtsi
ARM: dts: msm: update default mdp clock for 120 fps on lito target
2020-06-10 03:44:37 +05:30
lito-smp2p.dtsi
…
lito-thermal-overlay.dtsi
…
lito-thermal.dtsi
ARM: dts: qcom: enable modem beamer ADC thermal zones for LAGOON
2020-08-17 22:04:22 -07:00
lito-usb.dtsi
ARM: dts: msm: Change trigger type of dp_hs_phy_irq and dm_hs_phy_irq
2020-07-23 00:49:05 -07:00
lito-v2-atp-lcd-overlay.dts
…
lito-v2-atp-lcd.dts
…
lito-v2-atp-overlay.dts
…
lito-v2-atp.dts
…
lito-v2-audio.dtsi
…
lito-v2-cdp-overlay.dts
…
lito-v2-cdp.dts
…
lito-v2-mtp-overlay.dts
…
lito-v2-mtp.dts
…
lito-v2-qrd-overlay.dts
…
lito-v2-qrd.dts
…
lito-v2.dts
…
lito-v2.dtsi
…
lito-vidc.dtsi
…
lito.dts
…
lito.dtsi
ARM: dts: msm: Add support for BIMC logging for LITO
2020-11-15 21:14:43 -08:00
litomagnus-cdp-overlay.dts
ARM: dts: msm: Remove adsp fw name overriding for magnus
2021-11-12 12:06:19 +05:30
litomagnus-cdp.dts
ARM: dts: msm: Add device tree files for Litomagnus variant
2020-09-03 22:43:44 +05:30
litomagnus-cdp.dtsi
ARM: dts: msm: Disable pmk8350 vadc node for litomagnus and orchid
2020-12-01 17:04:40 +05:30
litomagnus-mtp-overlay.dts
ARM: dts: msm: Remove adsp fw name overriding for magnus
2021-11-12 12:06:19 +05:30
litomagnus-mtp.dts
ARM: dts: msm: Add device tree files for Litomagnus variant
2020-09-03 22:43:44 +05:30
litomagnus-mtp.dtsi
ARM: dts: msm: Disable pmk8350 vadc node for litomagnus and orchid
2020-12-01 17:04:40 +05:30
litomagnus.dts
ARM: dts: msm: Add device tree files for Litomagnus variant
2020-09-03 22:43:44 +05:30
litomagnus.dtsi
ARM: dts: msm: Separate out Magnus specific node from Orchid
2020-10-22 22:27:36 +05:30
magnus.dtsi
ARM: dts: msm: Separate out Magnus specific node from Orchid
2020-10-22 22:27:36 +05:30
Makefile
arm64/dts: capri add init dvt2 overlay
2023-05-31 17:01:02 -03:00
msm8917-bus.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8917-camera-pinctrl.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8917-camera.dtsi
ARM: dts: qcom: Fix for multiple failure in camera
2021-03-31 01:35:15 -07:00
msm8917-coresight.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8917-cpu.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8917-gpu.dtsi
ARM: dts: msm: Correct the GPU bw table for MSM8917
2021-04-28 23:56:59 -07:00
msm8917-ion.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8917-mdss-pll.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8917-mdss.dtsi
ARM: dts: msm: update mdss byte/pxl clocks for SPF targets
2021-03-18 11:05:15 +05:30
msm8917-pinctrl.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8917-pm.dtsi
ARM: dts: msm: Update the lpm params
2021-06-24 10:52:11 +05:30
msm8917-regulator.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8917-thermal.dtsi
ARM: dts: msm: Add CPU clock node for QM215
2021-03-03 03:59:36 -08:00
msm8917-vidc.dtsi
ARM: dts: msm: Update bus mode for msm8917/37
2021-04-28 02:34:41 -07:00
msm8917.dtsi
ARM: dts: msm: Add cpucc support for SDM439
2021-06-18 08:07:01 +05:30
msm8937-audio.dtsi
ARM: dts: msm: Audio dtsi changes for tasha variants
2021-06-28 17:07:18 +05:30
msm8937-bus.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-camera.dtsi
ARM: dts: msm: Add iommu cells count for msm8937 and sdm660
2021-06-04 19:16:33 +05:30
msm8937-coresight.dtsi
ARM: dts: msm: Update 8937-coresight dtsi for 4.19
2021-10-21 22:46:44 -07:00
msm8937-cpu.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-gpu.dtsi
ARM: dts: msm: Update GPU bandwidth table for SDM439
2021-04-23 13:40:33 +05:30
msm8937-interposer-sdm429-cdp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-interposer-sdm429-mtp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-interposer-sdm429.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-interposer-sdm429.dtsi
ARM: dts: msm: Add cpucc support for SDM439
2021-06-18 08:07:01 +05:30
msm8937-interposer-sdm439-cdp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-interposer-sdm439-mtp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-interposer-sdm439-qrd.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-interposer-sdm439.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-interposer-sdm439.dtsi
ARM: dts: msm: Add cpucc support for SDM439
2021-06-18 08:07:01 +05:30
msm8937-ion.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-mdss-panels.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-mdss-pll.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-mdss.dtsi
Merge "ARM: dts: msm: update mdss byte/pxl clocks for SPF targets"
2021-03-21 21:29:25 -07:00
msm8937-pinctrl.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-pm.dtsi
ARM: dts: msm: Update the lpm params
2021-06-24 10:52:11 +05:30
msm8937-regulator.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm8937-thermal.dtsi
ARM: dts: msm: Add cpucc support for SDM439
2021-06-18 08:07:01 +05:30
msm8937-vidc.dtsi
ARM: dts: msm: Update bus mode for msm8917/37
2021-04-28 02:34:41 -07:00
msm8937.dtsi
ARM: dts: msm: update cpufreq table for SDM439
2021-07-30 04:29:34 -07:00
msm8953-wsa881x.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm-arm-smmu-660.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
msm-arm-smmu-8917.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm-arm-smmu-8937.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm-arm-smmu-bengal.dtsi
…
msm-arm-smmu-impl-defs-660.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
msm-arm-smmu-impl-defs-8937.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm-arm-smmu-kona.dtsi
…
msm-arm-smmu-lagoon.dtsi
ARM: dts: msm: define qcom,no-dynamic-asid on lagoon
2021-06-10 05:21:20 -07:00
msm-arm-smmu-lito.dtsi
…
msm-arm-smmu-scuba.dtsi
ARM: dts: msm: update smmu configuration for scuba
2020-04-24 01:02:26 +05:30
msm-audio-lpass.dtsi
ARM: dts: msm: Audio dtsi changes for tasha variants
2021-06-28 17:07:18 +05:30
msm-audio.dtsi
ARM: dts: msm: tasha snd node changes for sdm660
2020-10-08 16:53:47 +05:30
msm-gdsc-660.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
msm-gdsc-8916.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
msm-pm660a.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
msm-qvr-external.dtsi
…
msm-rdbg-scuba.dtsi
ARM: dts: msm: add remote debugger support
2020-08-24 16:42:16 +05:30
msm-rdbg.dtsi
…
orchid-cdp-overlay.dts
ARM: dts: msm: Update the subtype for CDP for orchid
2020-11-25 15:39:40 +05:30
orchid-cdp.dts
ARM: dts: msm: Update the subtype for CDP for orchid
2020-11-25 15:39:40 +05:30
orchid-cdp.dtsi
ARM: dts: msm: Disable pmk8350 vadc node for litomagnus and orchid
2020-12-01 17:04:40 +05:30
orchid-mtp-overlay.dts
ARM: dts: msm: Enable default adsp img loading
2020-09-11 17:50:57 +05:30
orchid-mtp.dts
ARM: dts: msm: Add device tree files for Orchid
2020-08-10 03:26:16 -07:00
orchid-mtp.dtsi
ARM: dts: msm: Disable pmk8350 vadc node for litomagnus and orchid
2020-12-01 17:04:40 +05:30
orchid.dts
ARM: dts: msm: Add device tree files for Orchid
2020-08-10 03:26:16 -07:00
orchid.dtsi
ARM: dts: msm: skip dp mst encoder enumeration
2020-11-10 16:43:44 -08:00
pm660-rpm-regulator.dtsi
ARM: dts: msm: Add regulators for PM660
2020-06-08 18:28:25 +05:30
pm660.dtsi
ARM: dts: qcom: Enable PD2.0 only as source for SDM660
2021-01-28 21:27:40 -08:00
pm660l-rpm-regulator.dtsi
ARM: dts: msm: Add dt entry regulator-hw-type
2020-06-02 02:45:12 -07:00
pm660l.dtsi
ARM: dts: msm: Configure "qcom,sync-dly" to 800us for SDM660
2021-02-03 19:13:24 +05:30
pm2250-rpm-regulator.dtsi
…
pm2250.dtsi
ARM: dts: msm: Add S3 die_temp channel for scuba
2020-07-23 15:21:18 +05:30
pm6125-rpm-regulator.dtsi
…
pm6125.dtsi
…
pm6150l.dtsi
…
pm6350.dtsi
…
pm7250b.dtsi
ARM: dts: msm: Enable KPDPWR status logging
2021-12-21 14:11:12 +05:30
pm8008.dtsi
ARM: dts: msm: Prevent PM8008 LPM usage for all targets
2021-08-26 15:45:23 +05:30
pm8009.dtsi
…
pm8150.dtsi
Revert "ARM: dts: msm: disable power key on RB5"
2020-07-16 10:39:14 +08:00
pm8150b.dtsi
…
pm8150l.dtsi
…
pm8916-rpm-regulator.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
pm8916.dtsi
ARM: dts: msm: Update adc peripherals for SPF targets
2021-11-08 12:06:21 +05:30
pm8937-rpm-regulator.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
pm8937.dtsi
ARM: dts: msm: Update adc peripherals for SPF targets
2021-11-08 12:06:21 +05:30
pm8953-rpm-regulator.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
pm8953.dtsi
ARM: dts: msm: Update adc peripherals for SPF targets
2021-11-08 12:06:21 +05:30
pmi632.dtsi
dts:moto charger/battery enable
2023-05-31 17:00:59 -03:00
pmk8350.dtsi
ARM: dts: msm: Enable smb1396 parallel charger for litomagnus MTP
2020-09-28 18:07:03 +05:30
pmr735b.dtsi
…
qcm2150-qrd-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qcm2150-qrd.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qcm2150-qrd.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qcm2150.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qcm2150.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qg-batterydata-alium-3600mah.dtsi
…
qg-batterydata-ascent-3450mah.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qg-batterydata-atl466271_3300mAh.dtsi
…
qg-batterydata-atl436186020H_3780mAh.dtsi
ARM: dts: qcom: Optimize jeita-fcc-step thresholds
2020-08-28 09:38:38 +05:30
qg-batterydata-ATL-4V45_6000mah.dtsi
add oem battery profile version.
2023-05-31 17:01:02 -03:00
qg-batterydata-jk50-atl-4850mah.dtsi
change default battery SN for capri 5000 & capri+.
2023-05-31 17:01:02 -03:00
qg-batterydata-jk50-atl-5000mah.dtsi
battery: Config atl and scud batt profile for borneo
2023-05-31 17:01:01 -03:00
qg-batterydata-jk50-atl-flex-4850mah.dtsi
dts:battery profile integration gaum/guamp
2023-05-31 17:01:00 -03:00
qg-batterydata-jk50-atl-india-4850mah.dtsi
dts:integrate india local buy battery profile
2023-05-31 17:01:02 -03:00
qg-batterydata-jk50-atl-unicoba-4850mah.dtsi
dts:battery profile integration gaum/guamp
2023-05-31 17:01:00 -03:00
qg-batterydata-jk50-scud-4850mah.dtsi
dts:battery profile integration gaum/guamp
2023-05-31 17:01:00 -03:00
qg-batterydata-jk50-scud-5000mah.dtsi
battery: Config atl and scud batt profile for borneo
2023-05-31 17:01:01 -03:00
qg-batterydata-jk50-swd-4850mah.dtsi
change default battery SN for capri 5000 & capri+.
2023-05-31 17:01:02 -03:00
qg-batterydata-lg50-amperex-5000mah.dtsi
dts:moto charger/battery enable
2023-05-31 17:00:59 -03:00
qg-batterydata-mlp356477-2800mah.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qm215-audio.dtsi
ARM: dts: msm: Audio dtsi changes for QM215
2021-02-26 12:59:19 +05:30
qm215-camera-sensor-qrd.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qm215-camera.dtsi
ARM: dts: msm: Add iommu cells count for msm8937 and sdm660
2021-06-04 19:16:33 +05:30
qm215-pm8916.dtsi
ARM: dts: msm: Set polling delay to zero for ADC thermistors on QM215
2022-01-21 07:42:20 +05:30
qm215-qrd-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qm215-qrd-smb1360-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qm215-qrd-smb1360.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qm215-qrd-smb1360.dtsi
ARM: dts: msm: Update adc peripherals for SPF targets
2021-11-08 12:06:21 +05:30
qm215-qrd.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qm215-qrd.dtsi
ARM: dts: msm: Add scale-fn-type for batt_therm for QM215
2021-03-02 03:46:46 -08:00
qm215-regulator.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
qm215.dts
ARM: dts: msm: Audio dtsi changes for QM215
2021-02-26 12:59:19 +05:30
qm215.dtsi
ARM: dts: msm: Add cpucc support for SDM439
2021-06-18 08:07:01 +05:30
qrb5165-iot-rb5.dts
ARM: dts: msm: Refactor the devicetree entry for RB5 boards
2022-03-14 14:10:11 +08:00
qrb5165-iot-rb5.dtsi
ARM: dts: msm: Refactor the devicetree entry for RB5 boards
2022-03-14 14:10:11 +08:00
qrb5165.dtsi
ARM: dts: msm: Configure PCIE2 for I210 Ethernet card
2022-08-11 11:27:11 +05:30
qrb5165m-iot-rb5.dts
ARM: dts: msm: Refactor the devicetree entry for RB5 boards
2022-03-14 14:10:11 +08:00
qrb5165m-iot-rb5.dtsi
ARM: dts: msm: Enable imx586 and imx686 for RB5 NonPop/M SOM
2023-04-10 04:38:48 -07:00
qrb5165n-iot-rb5.dts
ARM: dts: msm: Add support for QRB5165N SoC
2021-08-04 19:05:29 +08:00
qrb5165n-iot-rb5.dtsi
ARM: dts: msm: Enable imx586 and imx686 for RB5 NonPop/M SOM
2023-04-10 04:38:48 -07:00
qrb5165n-v2-iot-rb5.dts
ARM: dts: msm: Refactor the devicetree entry for RB5 boards
2022-03-14 14:10:11 +08:00
qrb5165n-v2-iot-rb5.dtsi
ARM: dts: msm: Refactor the devicetree entry for RB5 boards
2022-03-14 14:10:11 +08:00
qrb5165n.dtsi
ARM: dts: msm: Add support for QRB5165N SoC
2021-08-04 19:05:29 +08:00
scuba-2gb.dts
ARM: dts: msm: Add device tree files for scuba IDP low RAM
2020-06-08 17:18:05 +08:00
scuba-audio-overlay.dtsi
ARM: dts: msm: Add node to check foundry id for scuba
2020-07-22 20:18:29 -07:00
scuba-audio.dtsi
ARM: dts: msm: reorder the dtsi for lpi entries on bengal
2020-07-02 09:16:53 +05:30
scuba-bus.dtsi
ARM: dts: msm: Add the clock handle for GNOC clock for SCUBA
2020-08-13 20:06:04 +05:30
scuba-coresight.dtsi
ARM: dts: msm: Enable SMMU Stage1 for QDSS on scuba
2020-06-18 15:27:43 +08:00
scuba-gdsc.dtsi
…
scuba-gpu.dtsi
ARM: dts: msm: Update bimc_gpu_clk clock handle for scuba GPU
2020-10-08 10:31:28 -07:00
scuba-idp-2gb.dts
ARM: dts: msm: Add device tree files for scuba IDP low RAM
2020-06-08 17:18:05 +08:00
scuba-idp-overlay.dts
ARM: dts: msm: Add initial device tree for Scuba APQ
2020-06-08 14:08:34 +05:30
scuba-idp-usbc-2gb.dts
ARM: dts: msm: Add device tree files for scuba IDP low RAM
2020-06-08 17:18:05 +08:00
scuba-idp-usbc-overlay.dts
…
scuba-idp-usbc.dts
…
scuba-idp-usbc.dtsi
ARM: dts: msm: Disable island mode for NA variant in scuba target
2020-06-28 22:30:54 -07:00
scuba-idp.dts
…
scuba-idp.dtsi
ARM: dts: msm: Enable Display reset gpio always on for scuba
2020-06-12 00:32:43 -07:00
scuba-ion.dtsi
ARM: dts: msm: Remove user_contig CMA allocation for scuba
2020-06-15 07:28:37 -07:00
scuba-iot-2gb.dts
ARM: dts: msm: Add device tree support for scuba iot low ram target
2021-01-29 16:18:36 +05:30
scuba-iot-idp-2gb.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-idp-overlay.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-idp-usbc-2gb.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-idp-usbc-overlay.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-idp-usbc.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-idp-usbc.dtsi
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-idp.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-idp.dtsi
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-low-ram.dtsi
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-qcs.dtsi
ARM: dts: msm: Disable IPA for scuba iot qcs variants
2021-01-27 15:27:45 +05:30
scuba-iot-qrd-eldo-overlay.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-qrd-eldo.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-qrd-eldo.dtsi
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-qrd-non-eldo-overlay.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-qrd-non-eldo.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-qrd.dtsi
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot-rb1-overlay.dts
ARM: dts: qcom: update the subtype
2022-04-08 07:44:00 +05:30
scuba-iot-rb1.dtsi
ARM: dts: msm: enable the 4-wire UART SE0 for QCS2290
2022-05-25 18:13:51 +05:30
scuba-iot.dts
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-iot.dtsi
ARM: dts: msm: Add device tree files for SCUBA IOT
2020-08-20 01:52:53 -07:00
scuba-low-ram.dtsi
ARM: dts: msm: reduce common cma region into 16MB
2020-09-13 23:13:22 -07:00
scuba-lpi.dtsi
…
scuba-pinctrl.dtsi
ARM: dts: msm: Add 4-wire UART SE0 dt nodes for DIAG
2022-05-24 21:43:30 -07:00
scuba-pm.dtsi
…
scuba-qrd-eldo-overlay.dts
ARM: dts: msm: Add initial device tree for Scuba APQ
2020-06-08 14:08:34 +05:30
scuba-qrd-eldo.dts
ARM: dts: msm: Add device tree files for scuba QRD ELDO device
2020-05-20 00:50:18 -07:00
scuba-qrd-eldo.dtsi
ARM: dts: qcom: add external regulator to supply HS USBPHY for scuba-qrd
2020-06-08 19:44:00 +08:00
scuba-qrd-non-eldo-overlay.dts
ARM: dts: msm: Add initial device tree for Scuba APQ
2020-06-08 14:08:34 +05:30
scuba-qrd-non-eldo.dts
ARM: dts: msm: Add support for regulator down notifications on Scuba
2020-06-16 16:58:32 +05:30
scuba-qrd.dtsi
ARM: dts: qcom: Update skin thermal zone config for SCUBA
2020-08-27 01:43:57 -07:00
scuba-qupv3.dtsi
ARM: dts: msm: Add 4-wire UART SE0 dt nodes for DIAG
2022-05-24 21:43:30 -07:00
scuba-regulator.dtsi
ARM: dts: msm: Update lower limit voltage for L21A
2020-09-23 14:47:28 +05:30
scuba-rumi-overlay.dts
…
scuba-rumi.dts
…
scuba-rumi.dtsi
…
scuba-sde-display.dtsi
ARM: dts: msm: update dynamic dsi clock value for NT36525 on scuba
2020-08-26 18:23:08 -07:00
scuba-sde-pll.dtsi
…
scuba-sde.dtsi
ARM: dts: msm: add dt support for display imem in scuba
2020-07-03 01:23:32 -07:00
scuba-stub-regulator.dtsi
…
scuba-thermal-overlay.dtsi
…
scuba-thermal.dtsi
ARM: dts: msm: Add s3-die-temp thermal zone for scuba
2020-08-07 17:41:19 +05:30
scuba-usb.dtsi
ARM: dts: msm: Add usb3-u1u2-disable for msm-4.19 targets
2021-08-17 15:06:38 +05:30
scuba-vidc.dtsi
…
scuba.dts
…
scuba.dtsi
Merge "ARM: dts: msm: switch off kpti on some targets"
2020-09-23 07:52:54 -07:00
scubalite-iot-idp-2gb.dts
ARM: dts: msm: Add device tree files for SCUBALITE
2022-03-31 12:49:02 +05:30
scubalite-iot-idp-overlay.dts
ARM: dts: msm: Add device tree files for SCUBALITE
2022-03-31 12:49:02 +05:30
scubalite-iot-idp.dtsi
ARM: dts: msm: Add device tree files for SCUBALITE
2022-03-31 12:49:02 +05:30
scubap-idp-2gb.dts
ARM: dts: msm: Add device tree files for scuba IDP low RAM
2020-06-08 17:18:05 +08:00
scubap-idp.dts
ARM: dts: msm: Disable the IPA hw in APQ targets
2020-09-23 15:01:21 +05:30
scubap-iot-2gb.dts
ARM: dts: qcom: Add new device tree
2022-03-30 07:51:53 +05:30
scubap-iot-idp-2gb.dts
ARM: dts: msm: Disable IPA for scuba iot qcs variants
2021-01-27 15:27:45 +05:30
scubap-iot-idp.dts
ARM: dts: msm: Disable IPA for scuba iot qcs variants
2021-01-27 15:27:45 +05:30
scubap-iot-rb1-2gb.dts
ARM: dts: qcom: update the subtype
2022-04-08 07:44:00 +05:30
scubap-iot.dts
ARM: dts: msm: Disable IPA for scuba iot qcs variants
2021-01-27 15:27:45 +05:30
scubap.dts
ARM: dts: msm: Disable the IPA hw in APQ targets
2020-09-23 15:01:21 +05:30
scubaplite-iot-idp-2gb.dts
ARM: dts: msm: Add device tree files for SCUBALITE
2022-03-31 12:49:02 +05:30
sda429-cdp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sda429-mtp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sda429.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sda429.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sda439-cdp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sda439-mtp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sda439.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sda439.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sda660-cdp-external-codec-overlay.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660-cdp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660-mtp-external-codec-overlay.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660-mtp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660-pm660a-cdp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660-pm660a-mtp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660-pm660a-qrd-hdk.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660-pm660a-rcm.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660-pm660l.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660-rcm-external-codec-overlay.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660-rcm.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sda660.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm429-cdp-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm429-cdp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm429-cdp.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm429-cpu.dtsi
ARM: dts: msm: Update CPU nodes
2021-05-21 02:36:59 -07:00
sdm429-mtp-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm429-mtp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm429-mtp.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm429-qrd-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm429-qrd.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm429-qrd.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm429.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm429.dtsi
ARM: dts: msm: update cpufreq table for SDM439
2021-07-30 04:29:34 -07:00
sdm439-audio.dtsi
ARM: dts: msm: Audio dtsi changes for tasha variants
2021-06-28 17:07:18 +05:30
sdm439-camera-sensor-cdp.dtsi
ARM: dts: msm: Enable camera flash for sdm439 and sdm429
2021-05-20 05:49:13 -07:00
sdm439-camera-sensor-mtp.dtsi
ARM: dts: qcom: Enable subdevices of camera in SDM439
2021-06-07 13:45:20 +05:30
sdm439-camera-sensor-qrd.dtsi
ARM: dts: qcom: Enable subdevices of camera in SDM439
2021-06-07 13:45:20 +05:30
sdm439-cdp-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-cdp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-cdp.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-ext-audio-mtp.dtsi
ARM: dts: msm: Audio dtsi changes for tasha variants
2021-06-28 17:07:18 +05:30
sdm439-external-codec-mtp-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-external-codec-mtp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-external-codec.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-mtp-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-mtp.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-mtp.dtsi
ARM: dts: msm: Add pmic support for sdm439 and sdm429
2021-04-01 09:22:09 +05:30
sdm439-pm8953.dtsi
ARM: dts: msm: Update adc peripherals for SPF targets
2021-11-08 12:06:21 +05:30
sdm439-pmi632.dtsi
ARM: dts: msm: don't use smb5_vbus regulator for SDM439/429
2021-06-16 23:00:25 -07:00
sdm439-qrd-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-qrd.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-qrd.dtsi
ARM: dts: msm: Use default scaling function for bat_therm on SDM439/429 QRD
2021-05-06 17:51:12 +05:30
sdm439-rcm-overlay.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-rcm.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-rcm.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439-regulator.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439.dts
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm439.dtsi
ARM: dts: msm: update cpufreq table for SDM439
2021-07-30 04:29:34 -07:00
sdm660-audio.dtsi
ARM: dts: msm: tasha snd node changes for sdm660
2020-10-08 16:53:47 +05:30
sdm660-blsp.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-bus.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-camera-sensor-cdp.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-camera-sensor-mtp.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-camera-sensor-qrd.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-camera.dtsi
ARM: dts: msm: Add iommu cells count for msm8937 and sdm660
2021-06-04 19:16:33 +05:30
sdm660-cdp-external-codec-overlay.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-cdp-internal-codec-overlay.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-cdp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-cdp.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-common.dtsi
ARM: dts: msm: Add missing properties for SDM660
2021-04-01 10:00:57 -07:00
sdm660-coresight.dtsi
ARM: dts: msm: Use scatter-gather for SDM660 in 4.19
2021-07-28 21:37:32 -07:00
sdm660-external-codec.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-gpu.dtsi
ARM: dts: msm: Remove adreno "qcom,bus-width" entry
2020-07-28 16:22:36 +05:30
sdm660-headset-jacktype-no-cdp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-headset-jacktype-no-rcm.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-internal-codec-cdp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-internal-codec-mtp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-internal-codec-pm660a-cdp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-internal-codec-pm660a-mtp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-internal-codec-pm660a-rcm.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-internal-codec-rcm.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-internal-codec.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-ion.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-lpi.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-mdss-panels.dtsi
ARM: dts: msm: update settings for nt35597 truly panels
2020-07-21 12:21:35 +05:30
sdm660-mdss-pll.dtsi
ARM: dts: msm: Update DP PLL string for SDM660
2020-08-31 15:36:33 +05:30
sdm660-mdss.dtsi
ARM: dts: msm: add rt rotator support for SDM660
2021-02-17 21:27:36 -08:00
sdm660-mtp-external-codec-overlay.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-mtp-internal-codec-overlay.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-mtp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-mtp.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-pinctrl.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30
sdm660-pm660a-cdp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-pm660a-headset-jacktype-no-cdp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-pm660a-headset-jacktype-no-rcm.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-pm660a-mtp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-pm660a-qrd.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-pm660a-rcm.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-pm660a-sim.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-pm660a.dts
ARM: dts: qcom: Add support sdm660-pm660a for SDM660
2022-05-12 17:35:33 +05:30
sdm660-pm660l.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-pm.dtsi
ARM: dts: msm: Disable IPI prediction for sdm660
2020-12-28 01:09:26 -08:00
sdm660-qrd-dsi-rm67195-amoled-overlay.dts
ARM: dts: qcom: Add support sdm660-pm660a for SDM660
2022-05-12 17:35:33 +05:30
sdm660-qrd-dsi-rm67195-amoled.dts
ARM: dts: qcom: Add support sdm660-pm660a for SDM660
2022-05-12 17:35:33 +05:30
sdm660-qrd-external-codec-overlay.dts
Merge "ARM: dts: msm: Update WLED configuration for sdm660"
2020-10-11 03:50:30 -07:00
sdm660-qrd.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-qrd.dtsi
ARM: dts: msm: tasha snd node changes for sdm660
2020-10-08 16:53:47 +05:30
sdm660-rcm-external-codec-overlay.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-rcm-internal-codec-overlay.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-rcm.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-regulator.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-sim.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-thermal.dtsi
ARM: dts: qcom: Enable cpu isolate cooling devices for SDM660
2020-07-23 20:53:01 -07:00
sdm660-usbc-audio-mtp.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-usbc-audio-rcm.dts
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-vidc.dtsi
ARM: dts: msm: Remove never-unload-fw property
2021-05-25 21:57:09 -07:00
sdm660-wcd.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660-wsa881x.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
sdm660.dtsi
ARM: dts: qcom: Add apb_bclk to enable dcc
2023-02-15 04:07:30 -08:00
sdxprairie-thermal-integrated.dtsi
ARM: dts: qcom: enable modem beamer ADC thermal zones for LAGOON
2020-08-17 22:04:22 -07:00
skeleton64.dtsi
ARM: dts: msm: Add initial device tree for SDM660
2020-07-21 12:21:17 +05:30
smb1355.dtsi
ARM: dts: msm: Add pmic support for sdm439 and sdm429
2021-04-01 09:22:09 +05:30
smb1390.dtsi
ARM: dts: msm: Enable stat-toggle only for lagoon
2020-04-29 12:20:00 +05:30
smb1394.dtsi
ARM: dts: msm: Add dt support for smb1394
2021-08-13 16:34:19 +05:30
smb1398.dtsi
ARM: dts: msm: Enable stat-toggle only for lagoon
2020-04-29 12:20:00 +05:30
vbms-batterydata-mlp356477-2800mah.dtsi
ARM: dts: msm: Add initial device tree for SDM429/439/QM215
2021-02-17 09:54:58 +05:30