ARM: dts: msm: Add device tree files for SCUBA IOT
Scuba IOT and Scubap IOT are new targets for IIOT. Add initial device tree files for SCUBA IOT SP. Change-Id: Ib6c0d9534e687c6e401b6094f7f77331b5b383f0
This commit is contained in:
Anurag Chouhan authored and Gerrit - the friendly Code Review server committed
1 parent
5b98335e20
commit
a8c96b1866
23 files changed
+887
-2
No files matched your search
@@ -62,6 +62,12 @@ SoCs:
|
||||
- SCUBA
|
||||
compatible = "qcom,scuba"
|
||||
|
||||
- SCUBAIOT
|
||||
compatible = "qcom,scuba-iot"
|
||||
|
||||
- SCUBAPIOT
|
||||
compatible = "qcom,scubap-iot"
|
||||
|
||||
- SDMSHRIKE
|
||||
compatible = "qcom,sdmshrike"
|
||||
|
||||
|
||||
+18
-2
@@ -179,13 +179,21 @@ ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y)
|
||||
scuba-idp-overlay.dtbo \
|
||||
scuba-idp-usbc-overlay.dtbo \
|
||||
scuba-qrd-eldo-overlay.dtbo \
|
||||
scuba-qrd-non-eldo-overlay.dtbo
|
||||
scuba-qrd-non-eldo-overlay.dtbo \
|
||||
scuba-iot-idp-overlay.dtbo \
|
||||
scuba-iot-idp-usbc-overlay.dtbo \
|
||||
scuba-iot-qrd-eldo-overlay.dtbo \
|
||||
scuba-iot-qrd-non-eldo-overlay.dtbo
|
||||
|
||||
scuba-rumi-overlay.dtbo-base := scuba.dtb scubap.dtb scuba-2gb.dtb
|
||||
scuba-idp-overlay.dtbo-base := scuba.dtb scubap.dtb scuba-2gb.dtb
|
||||
scuba-qrd-eldo-overlay.dtbo-base := scuba.dtb scubap.dtb scuba-2gb.dtb
|
||||
scuba-qrd-non-eldo-overlay.dtbo-base := scuba.dtb scubap.dtb scuba-2gb.dtb
|
||||
scuba-idp-usbc-overlay.dtbo-base := scuba.dtb scubap.dtb scuba-2gb.dtb
|
||||
scuba-iot-idp-overlay.dtbo-base := scuba-iot.dtb scubap-iot.dtb scuba-iot-2gb.dtb
|
||||
scuba-iot-qrd-eldo-overlay.dtbo-base := scuba-iot.dtb scubap-iot.dtb scuba-iot-2gb.dtb
|
||||
scuba-iot-qrd-non-eldo-overlay.dtbo-base := scuba-iot.dtb scubap-iot.dtb scuba-iot-2gb.dtb
|
||||
scuba-iot-idp-usbc-overlay.dtbo-base := scuba-iot.dtb scubap-iot.dtb scuba-iot-2gb.dtb
|
||||
else
|
||||
dtb-$(CONFIG_ARCH_SCUBA) += scuba-rumi.dtb \
|
||||
scuba-idp.dtb \
|
||||
@@ -195,7 +203,15 @@ dtb-$(CONFIG_ARCH_SCUBA) += scuba-rumi.dtb \
|
||||
scubap-idp.dtb \
|
||||
scubap-idp-2gb.dtb \
|
||||
scuba-idp-2gb.dtb \
|
||||
scuba-idp-usbc-2gb.dtb
|
||||
scuba-idp-usbc-2gb.dtb \
|
||||
scuba-iot-idp.dtb \
|
||||
scuba-iot-idp-usbc.dtb \
|
||||
scubap-iot-idp.dtb \
|
||||
scuba-iot-qrd-eldo.dtb \
|
||||
scuba-iot-qrd-non-eldo.dtb \
|
||||
scubap-iot-idp-2gb.dtb \
|
||||
scuba-iot-idp-2gb.dtb \
|
||||
scuba-iot-idp-usbc-2gb.dtb
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y)
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot-low-ram.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT 2GB DDR SoC";
|
||||
compatible = "qcom,scuba-iot";
|
||||
qcom,msm-id = <473 0x10000>, <474 0x10000>;
|
||||
qcom,board-id = <0 0x400>;
|
||||
};
|
||||
@@ -0,0 +1,11 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot-low-ram.dtsi"
|
||||
#include "scuba-iot-idp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT IDP 2GB DDR";
|
||||
compatible = "qcom,scuba-idp", "qcom,scuba-iot", "qcom,idp";
|
||||
qcom,msm-id = <473 0x10000>;
|
||||
qcom,board-id = <34 0x400>;
|
||||
};
|
||||
@@ -0,0 +1,12 @@
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include "scuba-iot-idp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT IDP";
|
||||
compatible = "qcom,scuba-idp", "qcom,scuba-iot", "qcom,idp";
|
||||
qcom,msm-id = <473 0x10000>, <474 0x10000>;
|
||||
qcom,board-id = <34 0>;
|
||||
};
|
||||
@@ -0,0 +1,12 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot-low-ram.dtsi"
|
||||
#include "scuba-iot-idp.dtsi"
|
||||
#include "scuba-iot-idp-usbc.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT IDP USBC Audio 2GB DDR";
|
||||
compatible = "qcom,scuba-idp", "qcom,scuba-iot", "qcom,idp";
|
||||
qcom,msm-id = <473 0x10000>;
|
||||
qcom,board-id = <34 0x401>;
|
||||
};
|
||||
@@ -0,0 +1,13 @@
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include "scuba-iot-idp.dtsi"
|
||||
#include "scuba-iot-idp-usbc.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT IDP USBC Audio";
|
||||
compatible = "qcom,scuba-idp", "qcom,scuba-iot", "qcom,idp";
|
||||
qcom,msm-id = <473 0x10000>;
|
||||
qcom,board-id = <34 1>;
|
||||
};
|
||||
@@ -0,0 +1,11 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot.dtsi"
|
||||
#include "scuba-iot-idp.dtsi"
|
||||
#include "scuba-iot-idp-usbc.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT IDP USBC Audio";
|
||||
compatible = "qcom,scuba-idp", "qcom,scuba-iot", "qcom,idp";
|
||||
qcom,board-id = <34 1>;
|
||||
};
|
||||
@@ -0,0 +1,14 @@
|
||||
&scuba_snd {
|
||||
qcom,msm-mbhc-usbc-audio-supported = <1>;
|
||||
qcom,msm-mbhc-hphl-swh = <1>;
|
||||
qcom,msm-mbhc-gnd-swh = <1>;
|
||||
};
|
||||
|
||||
&adsp_loader {
|
||||
adsp-fuse-not-supported = <1>;
|
||||
adsp-fw-name = "adsp2";
|
||||
};
|
||||
|
||||
&va_cdc_dma_0_tx {
|
||||
qcom,msm-dai-is-island-supported = <0>;
|
||||
};
|
||||
@@ -0,0 +1,10 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot.dtsi"
|
||||
#include "scuba-iot-idp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT IDP";
|
||||
compatible = "qcom,scuba-idp", "qcom,scuba-iot", "qcom,idp";
|
||||
qcom,board-id = <34 0>;
|
||||
};
|
||||
@@ -0,0 +1,208 @@
|
||||
#include "scuba-audio-overlay.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/iio/qcom,spmi-vadc.h>
|
||||
#include "scuba-thermal-overlay.dtsi"
|
||||
#include "scuba-sde-display.dtsi"
|
||||
#include "camera/scuba-camera-sensor-idp.dtsi"
|
||||
|
||||
&soc {
|
||||
scuba_batterydata: qcom,battery-data {
|
||||
qcom,batt-id-range-pct = <15>;
|
||||
#include "qg-batterydata-alium-3600mah.dtsi"
|
||||
#include "qg-batterydata-atl466271_3300mAh.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&pm2250_rg_leds {
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
|
||||
&pm2250_qg {
|
||||
qcom,battery-data = <&scuba_batterydata>;
|
||||
qcom,qg-iterm-ma = <150>;
|
||||
qcom,hold-soc-while-full;
|
||||
qcom,linearize-soc;
|
||||
qcom,cl-feedback-on;
|
||||
qcom,tcss-enable;
|
||||
qcom,fvss-enable;
|
||||
qcom,fvss-vbatt-mv = <3500>;
|
||||
qcom,bass-enable;
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
vdd-supply = <&L20A>;
|
||||
qcom,vdd-voltage-level = <2856000 2856000>;
|
||||
qcom,vdd-current-level = <0 570000>;
|
||||
|
||||
vdd-io-supply = <&L14A>;
|
||||
qcom,vdd-io-always-on;
|
||||
qcom,vdd-io-lpm-sup;
|
||||
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
||||
qcom,vdd-io-current-level = <0 325000>;
|
||||
|
||||
pinctrl-names = "active", "sleep";
|
||||
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
|
||||
&sdc1_rclk_on>;
|
||||
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
|
||||
&sdc1_rclk_off>;
|
||||
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
vdd-supply = <&L21A>;
|
||||
qcom,vdd-voltage-level = <2960000 3300000>;
|
||||
qcom,vdd-current-level = <0 800000>;
|
||||
|
||||
vdd-io-supply = <&L4A>;
|
||||
qcom,vdd-io-voltage-level = <1800000 2960000>;
|
||||
qcom,vdd-io-current-level = <0 22000>;
|
||||
|
||||
pinctrl-names = "active", "sleep";
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
|
||||
cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
|
||||
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&pm2250_charger {
|
||||
interrupts-extended = <&tlmm 89 0>;
|
||||
interrupt-names = "usb_id_irq";
|
||||
qcom,usb-id-gpio = <&tlmm 89 0>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_id_interrupt>;
|
||||
|
||||
qcom,auto-recharge-soc = <98>;
|
||||
qcom,suspend-input-on-debug-batt;
|
||||
qcom,battery-data = <&scuba_batterydata>;
|
||||
io-channels = <&pm2250_vadc ADC_USB_IN_V_16>,
|
||||
<&pm2250_vadc ADC_CHG_TEMP>;
|
||||
io-channel-names = "usb_in_voltage",
|
||||
"chg_temp";
|
||||
qcom,thermal-mitigation = <2000000 1500000 1000000 500000>;
|
||||
};
|
||||
|
||||
&pm2250_pwm3 {
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&dsi_nt36525_truly_video {
|
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
|
||||
pwms = <&pm2250_pwm3 0 0>;
|
||||
qcom,bl-pmic-pwm-period-usecs = <100>;
|
||||
qcom,mdss-dsi-bl-min-level = <1>;
|
||||
qcom,mdss-dsi-bl-max-level = <4095>;
|
||||
qcom,platform-reset-gpio = <&tlmm 82 0>;
|
||||
qcom,platform-reset-gpio-always-on;
|
||||
qcom,platform-en-gpio = <&tlmm 105 0>;
|
||||
};
|
||||
|
||||
&dsi_td4330_truly_v2_video {
|
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
|
||||
pwms = <&pm2250_pwm3 0 0>;
|
||||
qcom,bl-pmic-pwm-period-usecs = <100>;
|
||||
qcom,mdss-dsi-bl-min-level = <1>;
|
||||
qcom,mdss-dsi-bl-max-level = <4095>;
|
||||
qcom,platform-reset-gpio = <&tlmm 82 0>;
|
||||
qcom,platform-en-gpio = <&tlmm 105 0>;
|
||||
};
|
||||
|
||||
&dsi_td4330_truly_v2_cmd {
|
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
|
||||
pwms = <&pm2250_pwm3 0 0>;
|
||||
qcom,bl-pmic-pwm-period-usecs = <100>;
|
||||
qcom,mdss-dsi-bl-min-level = <1>;
|
||||
qcom,mdss-dsi-bl-max-level = <4095>;
|
||||
qcom,platform-te-gpio = <&tlmm 81 0>;
|
||||
qcom,platform-reset-gpio = <&tlmm 82 0>;
|
||||
qcom,platform-en-gpio = <&tlmm 105 0>;
|
||||
};
|
||||
|
||||
&sde_dsi {
|
||||
qcom,dsi-default-panel = <&dsi_nt36525_truly_video>;
|
||||
};
|
||||
|
||||
&qupv3_se2_i2c {
|
||||
status = "okay";
|
||||
qcom,i2c-touch-active="novatek,NVT-ts";
|
||||
|
||||
novatek@62 {
|
||||
compatible = "novatek,NVT-ts";
|
||||
reg = <0x62>;
|
||||
status = "ok"
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <80 0x2008>;
|
||||
pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
|
||||
"pmx_ts_release";
|
||||
pinctrl-0 = <&ts_int_active &ts_reset_active>;
|
||||
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
||||
pinctrl-2 = <&ts_release>;
|
||||
|
||||
novatek,reset-gpio = <&tlmm 71 0x00>;
|
||||
novatek,irq-gpio = <&tlmm 80 0x2008>;
|
||||
|
||||
panel = <&dsi_nt36525_truly_video>;
|
||||
};
|
||||
|
||||
synaptics_tcm@20 {
|
||||
compatible = "synaptics,tcm-i2c";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <80 0x2008>;
|
||||
pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
|
||||
"pmx_ts_release";
|
||||
pinctrl-0 = <&ts_int_active &ts_reset_active>;
|
||||
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
||||
pinctrl-2 = <&ts_release>;
|
||||
synaptics,irq-gpio = <&tlmm 80 0x2008>;
|
||||
synaptics,irq-on-state = <0>;
|
||||
synaptics,reset-gpio = <&tlmm 71 0x00>;
|
||||
synaptics,reset-on-state = <0>;
|
||||
synaptics,reset-active-ms = <20>;
|
||||
synaptics,reset-delay-ms = <200>;
|
||||
synaptics,power-delay-ms = <200>;
|
||||
synaptics,ubl-i2c-addr = <0x20>;
|
||||
synaptics,extend_report;
|
||||
synaptics,firmware-name = "synaptics_firmware_k.img";
|
||||
|
||||
panel = <&dsi_td4330_truly_v2_video &dsi_td4330_truly_v2_cmd>;
|
||||
};
|
||||
};
|
||||
|
||||
&qusb_phy0 {
|
||||
extcon = <&pm2250_charger>;
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
extcon = <&qusb_phy0>, <&eud>;
|
||||
};
|
||||
|
||||
&qupv3_se1_i2c {
|
||||
status = "ok"
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
nq@28 {
|
||||
compatible = "qcom,nq-nci";
|
||||
reg = <0x28>;
|
||||
qcom,nq-irq = <&tlmm 70 0x00>;
|
||||
qcom,nq-ven = <&tlmm 69 0x00>;
|
||||
qcom,nq-firm = <&tlmm 31 0x00>;
|
||||
qcom,nq-clkreq = <&tlmm 86 0x00>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <70 0>;
|
||||
interrupt-names = "nfc_irq";
|
||||
pinctrl-names = "nfc_active", "nfc_suspend";
|
||||
pinctrl-0 = <&nfc_int_active &nfc_enable_active
|
||||
&nfc_clk_req_active>;
|
||||
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
|
||||
&nfc_clk_req_suspend>;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,47 @@
|
||||
#include "scuba-iot.dtsi"
|
||||
/ {
|
||||
reserved-memory {
|
||||
/delete-node/ removed_region@60000000;
|
||||
/delete-node/ qseecom_region;
|
||||
/delete-node/ qseecom_ta_region;
|
||||
/delete-node/ disp_rdump_region@5c000000;
|
||||
|
||||
tz_removed_region: tz_removed_region@60000000 {
|
||||
compatible = "removed-dma-pool";
|
||||
no-map;
|
||||
reg = <0x0 0x60000000 0x0 0x100000>;
|
||||
};
|
||||
|
||||
pimem_removed_region: pimem_removed_region@60100000 {
|
||||
compatible = "removed-dma-pool";
|
||||
no-map;
|
||||
reg = <0x0 0x60100000 0x0 0x1e00000>;
|
||||
};
|
||||
|
||||
qseecom_mem: qseecom_region {
|
||||
compatible = "shared-dma-pool";
|
||||
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
||||
reusable;
|
||||
alignment = <0x0 0x400000>;
|
||||
size = <0x0 0x1000000>;
|
||||
};
|
||||
|
||||
qseecom_ta_mem: qseecom_ta_region {
|
||||
compatible = "shared-dma-pool";
|
||||
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
||||
reusable;
|
||||
alignment = <0x0 0x400000>;
|
||||
size = <0x0 0x400000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
qcom_seecom: qseecom@61800000 {
|
||||
reg = <0x61800000 0x700000>;
|
||||
};
|
||||
|
||||
qcom_smcinvoke: smcinvoke@61800000 {
|
||||
reg = <0x61800000 0x700000>;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,12 @@
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include "scuba-iot-qrd-eldo.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba QRD IOT ELDO";
|
||||
compatible = "qcom,scuba-qrd", "qcom,scuba-iot", "qcom,qrd";
|
||||
qcom,msm-id = <473 0x10000>, <474 0x10000>;
|
||||
qcom,board-id = <0x2000B 0>;
|
||||
};
|
||||
@@ -0,0 +1,10 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot.dtsi"
|
||||
#include "scuba-iot-qrd-eldo.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT QRD ELDO";
|
||||
compatible = "qcom,scuba-qrd", "qcom,scuba-iot", "qcom,qrd";
|
||||
qcom,board-id = <0x2000B 0>;
|
||||
};
|
||||
@@ -0,0 +1,34 @@
|
||||
#include "scuba-iot-qrd.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
|
||||
&pm2250_gpios {
|
||||
vdd_3p1_en {
|
||||
vdd_3p1_en_default: vdd_3p1_en_default {
|
||||
pins = "gpio9";
|
||||
function = "normal";
|
||||
output-enable;
|
||||
input-disable;
|
||||
bias-disable;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
vreg_usb_3p1: vreg_usb_3p1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_usb_3p1";
|
||||
regulator-min-microvolt = <3100000>;
|
||||
regulator-max-microvolt = <3100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vdd_3p1_en_default>;
|
||||
gpio = <&pm2250_gpios 9 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <100>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&qusb_phy0 {
|
||||
vdda33-supply = <&vreg_usb_3p1>;
|
||||
};
|
||||
@@ -0,0 +1,12 @@
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include "scuba-iot-qrd.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT QRD NON ELDO";
|
||||
compatible = "qcom,scuba-qrd", "qcom,scuba-iot", "qcom,qrd";
|
||||
qcom,msm-id = <473 0x10000>, <474 0x10000>;
|
||||
qcom,board-id = <0x1000B 0>;
|
||||
};
|
||||
@@ -0,0 +1,10 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot.dtsi"
|
||||
#include "scuba-iot-qrd.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT QRD NON ELDO";
|
||||
compatible = "qcom,scuba-qrd", "qcom,scuba-iot", "qcom,qrd";
|
||||
qcom,board-id = <0x1000B 0>;
|
||||
};
|
||||
@@ -0,0 +1,369 @@
|
||||
#include "scuba-audio-overlay.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/iio/qcom,spmi-vadc.h>
|
||||
#include "scuba-thermal-overlay.dtsi"
|
||||
#include "scuba-sde-display.dtsi"
|
||||
#include "camera/scuba-camera-sensor-idp.dtsi"
|
||||
|
||||
&soc {
|
||||
scuba_batterydata: qcom,battery-data {
|
||||
qcom,batt-id-range-pct = <15>;
|
||||
#include "qg-batterydata-alium-3600mah.dtsi"
|
||||
#include "qg-batterydata-atl466271_3300mAh.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&pm2250_qg {
|
||||
qcom,battery-data = <&scuba_batterydata>;
|
||||
qcom,qg-iterm-ma = <150>;
|
||||
qcom,hold-soc-while-full;
|
||||
qcom,linearize-soc;
|
||||
qcom,cl-feedback-on;
|
||||
qcom,tcss-enable;
|
||||
qcom,fvss-enable;
|
||||
qcom,fvss-vbatt-mv = <3500>;
|
||||
qcom,bass-enable;
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
vdd-supply = <&L20A>;
|
||||
qcom,vdd-voltage-level = <2856000 2856000>;
|
||||
qcom,vdd-current-level = <0 570000>;
|
||||
|
||||
vdd-io-supply = <&L14A>;
|
||||
qcom,vdd-io-always-on;
|
||||
qcom,vdd-io-lpm-sup;
|
||||
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
||||
qcom,vdd-io-current-level = <0 325000>;
|
||||
|
||||
pinctrl-names = "active", "sleep";
|
||||
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
|
||||
&sdc1_rclk_on>;
|
||||
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
|
||||
&sdc1_rclk_off>;
|
||||
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&scuba_snd {
|
||||
qcom,model = "bengal-scubaqrd-snd-card";
|
||||
qcom,msm-mi2s-master = <1>, <1>, <1>, <1>;
|
||||
qcom,wcn-btfm = <1>;
|
||||
qcom,ext-disp-audio-rx = <0>;
|
||||
qcom,audio-routing =
|
||||
"AMIC1", "MIC BIAS1",
|
||||
"MIC BIAS1", "Analog Mic1",
|
||||
"AMIC2", "MIC BIAS2",
|
||||
"MIC BIAS2", "Analog Mic2",
|
||||
"AMIC3", "MIC BIAS3",
|
||||
"MIC BIAS3", "Analog Mic3",
|
||||
"AMIC4", "MIC BIAS3",
|
||||
"MIC BIAS3", "Analog Mic4",
|
||||
"IN1_HPHL", "HPHL_OUT",
|
||||
"IN2_HPHR", "HPHR_OUT",
|
||||
"IN3_AUX", "AUX_OUT",
|
||||
"SpkrMono WSA_IN", "AUX",
|
||||
"TX SWR_MIC0", "ADC1_OUTPUT",
|
||||
"TX SWR_MIC1", "ADC2_OUTPUT",
|
||||
"TX SWR_MIC5", "ADC3_OUTPUT",
|
||||
"TX SWR_MIC0", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC1", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC2", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC3", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC4", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC5", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC6", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC7", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC8", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC9", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC10", "VA_TX_SWR_CLK",
|
||||
"TX SWR_MIC11", "VA_TX_SWR_CLK",
|
||||
"RX_TX DEC0_INP", "TX DEC0 MUX",
|
||||
"RX_TX DEC1_INP", "TX DEC1 MUX",
|
||||
"RX_TX DEC2_INP", "TX DEC2 MUX",
|
||||
"RX_TX DEC3_INP", "TX DEC3 MUX",
|
||||
"TX_AIF1 CAP", "VA_TX_SWR_CLK",
|
||||
"TX_AIF2 CAP", "VA_TX_SWR_CLK",
|
||||
"TX_AIF3 CAP", "VA_TX_SWR_CLK",
|
||||
"VA SWR_MIC0", "ADC1_OUTPUT",
|
||||
"VA SWR_MIC1", "ADC2_OUTPUT",
|
||||
"VA SWR_MIC5", "ADC3_OUTPUT";
|
||||
qcom,msm-mbhc-hphl-swh = <1>;
|
||||
qcom,msm-mbhc-gnd-swh = <1>;
|
||||
asoc-codec = <&stub_codec>, <&bolero>;
|
||||
asoc-codec-names = "msm-stub-codec.1", "bolero_codec";
|
||||
qcom,wsa-max-devs = <1>;
|
||||
qcom,wsa-devs = <&wsa881x_i2c_e>;
|
||||
qcom,wsa-aux-dev-prefix = "SpkrMono";
|
||||
qcom,codec-max-aux-devs = <1>;
|
||||
qcom,codec-aux-devs = <&rouleur_codec>;
|
||||
qcom,msm_audio_ssr_devs = <&audio_apr>, <&q6core>, <&bolero>,
|
||||
<&lpi_tlmm>;
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
vdd-supply = <&L21A>;
|
||||
qcom,vdd-voltage-level = <2960000 3300000>;
|
||||
qcom,vdd-current-level = <0 800000>;
|
||||
|
||||
vdd-io-supply = <&L4A>;
|
||||
qcom,vdd-io-voltage-level = <1800000 2960000>;
|
||||
qcom,vdd-io-current-level = <0 22000>;
|
||||
|
||||
pinctrl-names = "active", "sleep";
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
|
||||
cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&pm2250_charger {
|
||||
qcom,auto-recharge-soc = <98>;
|
||||
qcom,suspend-input-on-debug-batt;
|
||||
qcom,battery-data = <&scuba_batterydata>;
|
||||
io-channels = <&pm2250_vadc ADC_USB_IN_V_16>,
|
||||
<&pm2250_vadc ADC_CHG_TEMP>;
|
||||
io-channel-names = "usb_in_voltage",
|
||||
"chg_temp";
|
||||
qcom,thermal-mitigation = <2000000 1500000 1000000 500000>;
|
||||
};
|
||||
|
||||
&pm2250_pwm3 {
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&thermal_zones {
|
||||
quiet-therm-usr {
|
||||
polling-delay = <5000>;
|
||||
};
|
||||
|
||||
quiet-therm-step {
|
||||
polling-delay-passive = <2000>;
|
||||
polling-delay = <5000>;
|
||||
thermal-governor = "step_wise";
|
||||
thermal-sensors = <&pm2250_adc_tm_iio ADC_AMUX_THM2_PU2>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
quiet_cpu0_trip: quiet-cpu0-trip {
|
||||
temperature = <40000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
quiet_modem_trip0: quiet-modem-trip0 {
|
||||
temperature = <40000>;
|
||||
hysteresis = <5000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
quiet_modem_trip1: quiet-modem-trip1 {
|
||||
temperature = <42000>;
|
||||
hysteresis = <5000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
quiet_gpu_trip: quiet-gpu-trip {
|
||||
temperature = <43000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
quiet_modem_trip2: quiet-modem-trip2 {
|
||||
temperature = <43000>;
|
||||
hysteresis = <5000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
quiet_modem_trip3: quiet-modem-trip3 {
|
||||
temperature = <50000>;
|
||||
hysteresis = <5000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
gpu-cdev {
|
||||
trip = <&quiet_gpu_trip>;
|
||||
cooling-device = <&msm_gpu THERMAL_NO_LIMIT
|
||||
(THERMAL_MAX_LIMIT - 3)>;
|
||||
};
|
||||
|
||||
cpu0-cdev {
|
||||
trip = <&quiet_cpu0_trip>;
|
||||
cooling-device = <&CPU0 THERMAL_NO_LIMIT
|
||||
(THERMAL_MAX_LIMIT - 3)>;
|
||||
};
|
||||
|
||||
modem-proc-cdev0 {
|
||||
trip = <&quiet_modem_trip0>;
|
||||
cooling-device = <&modem_proc 1 1>;
|
||||
};
|
||||
|
||||
modem-proc-cdev1 {
|
||||
trip = <&quiet_modem_trip3>;
|
||||
cooling-device = <&modem_proc 3 3>;
|
||||
};
|
||||
|
||||
modem-pa-cdev0 {
|
||||
trip = <&quiet_modem_trip1>;
|
||||
cooling-device = <&modem_pa 1 1>;
|
||||
};
|
||||
|
||||
modem-pa-cdev1 {
|
||||
trip = <&quiet_modem_trip2>;
|
||||
cooling-device = <&modem_pa 2 2>;
|
||||
};
|
||||
|
||||
modem-pa-cdev3 {
|
||||
trip = <&quiet_modem_trip3>;
|
||||
cooling-device = <&modem_pa 3 3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_nt36525_truly_video {
|
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
|
||||
pwms = <&pm2250_pwm3 0 0>;
|
||||
qcom,bl-pmic-pwm-period-usecs = <100>;
|
||||
qcom,mdss-dsi-bl-min-level = <1>;
|
||||
qcom,mdss-dsi-bl-max-level = <4095>;
|
||||
qcom,platform-reset-gpio = <&tlmm 82 0>;
|
||||
qcom,platform-reset-gpio-always-on;
|
||||
qcom,platform-en-gpio = <&tlmm 105 0>;
|
||||
};
|
||||
|
||||
&sde_dsi {
|
||||
qcom,dsi-default-panel = <&dsi_nt36525_truly_video>;
|
||||
};
|
||||
|
||||
&qupv3_se2_i2c {
|
||||
status = "ok"
|
||||
qcom,i2c-touch-active = "novatek,NVT-ts";
|
||||
|
||||
novatek@62 {
|
||||
compatible = "novatek,NVT-ts";
|
||||
reg = <0x62>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <80 0x2008>;
|
||||
pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
|
||||
"pmx_ts_release";
|
||||
pinctrl-0 = <&ts_int_active &ts_reset_active>;
|
||||
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
||||
pinctrl-2 = <&ts_release>;
|
||||
|
||||
novatek,reset-gpio = <&tlmm 71 0x00>;
|
||||
novatek,irq-gpio = <&tlmm 80 0x2008>;
|
||||
|
||||
panel = <&dsi_nt36525_truly_video>;
|
||||
};
|
||||
};
|
||||
|
||||
&qusb_phy0 {
|
||||
extcon = <&pm2250_charger>;
|
||||
|
||||
qcom,qusb-phy-init-seq = <0xf8 0x80
|
||||
0xb3 0x84
|
||||
0x83 0x88
|
||||
0xc5 0x8c
|
||||
0x30 0x08
|
||||
0x79 0x0c
|
||||
0x21 0x10
|
||||
0x14 0x9c
|
||||
0x80 0x04
|
||||
0x9f 0x1c
|
||||
0x00 0x18>;
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
extcon = <&qusb_phy0>, <&eud>;
|
||||
};
|
||||
|
||||
&qupv3_se1_i2c {
|
||||
status = "ok"
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
nq@28 {
|
||||
compatible = "qcom,nq-nci";
|
||||
reg = <0x28>;
|
||||
qcom,nq-irq = <&tlmm 70 0x00>;
|
||||
qcom,nq-ven = <&tlmm 69 0x00>;
|
||||
qcom,nq-firm = <&tlmm 31 0x00>;
|
||||
qcom,nq-clkreq = <&tlmm 86 0x00>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <70 0>;
|
||||
interrupt-names = "nfc_irq";
|
||||
pinctrl-names = "nfc_active", "nfc_suspend";
|
||||
pinctrl-0 = <&nfc_int_active &nfc_enable_active
|
||||
&nfc_clk_req_active>;
|
||||
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
|
||||
&nfc_clk_req_suspend>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
fpc_reset_int: fpc_reset_int {
|
||||
fpc_reset_low: reset_low {
|
||||
mux {
|
||||
pins = "gpio104";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio104";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
fpc_reset_high: reset_high {
|
||||
mux {
|
||||
pins = "gpio104";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio104";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
fpc_int_low: int_low {
|
||||
mux {
|
||||
pins = "gpio97";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio97";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
fingerprint: fpc1020 {
|
||||
compatible = "fpc,fpc1020";
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <97 0>;
|
||||
fpc,gpio_rst = <&tlmm 104 0>;
|
||||
fpc,gpio_irq = <&tlmm 97 0>;
|
||||
fpc,enable-on-boot;
|
||||
pinctrl-names = "fpc1020_reset_reset",
|
||||
"fpc1020_reset_active",
|
||||
"fpc1020_irq_active";
|
||||
pinctrl-0 = <&fpc_reset_low>;
|
||||
pinctrl-1 = <&fpc_reset_high>;
|
||||
pinctrl-2 = <&fpc_int_low>;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,9 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scuba IOT SoC";
|
||||
compatible = "qcom,scuba-iot";
|
||||
qcom,board-id = <0 0>;
|
||||
};
|
||||
@@ -0,0 +1,7 @@
|
||||
#include "scuba.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. IOT SCUBA";
|
||||
compatible = "qcom,scuba-iot";
|
||||
qcom,msm-id = <473 0x0>;
|
||||
};
|
||||
@@ -0,0 +1,11 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot-low-ram.dtsi"
|
||||
#include "scuba-iot-idp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scubap IOT IDP 2GB DDR";
|
||||
compatible = "qcom,scuba-idp", "qcom,scubap-iot", "qcom,idp";
|
||||
qcom,msm-id = <474 0x10000>;
|
||||
qcom,board-id = <34 0x400>;
|
||||
};
|
||||
@@ -0,0 +1,21 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot.dtsi"
|
||||
#include "scuba-iot-idp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scubap IOT IDP";
|
||||
compatible = "qcom,scuba-idp", "qcom,scubap-iot", "qcom,idp";
|
||||
qcom,msm-id = <474 0x10000>;
|
||||
qcom,board-id = <34 0>;
|
||||
};
|
||||
|
||||
&soc {
|
||||
qcom,rmnet-ipa {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&ipa_hw {
|
||||
status = "disabled";
|
||||
};
|
||||
@@ -0,0 +1,20 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "scuba-iot.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Scubap IOT SoC";
|
||||
compatible = "qcom,scubap-iot";
|
||||
qcom,msm-id = <474 0x10000>;
|
||||
qcom,board-id = <0 0>;
|
||||
};
|
||||
|
||||
&soc {
|
||||
qcom,rmnet-ipa {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&ipa_hw {
|
||||
status = "disabled";
|
||||
};
|
||||
Reference in new issue
Block a user