duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
78b5b12f0e1cc0cea59321a9660acbcdfff7d256
android_kernel_motorola_sm6225/qcom/dsi-panel-mot-tianma-nt37701-655-1080x2400-dsc-cmd-common-v1.dtsi
T
tanhua1 78b5b12f0e arm/dts: panel: add OD code for tianma nt37701 6.55 inch panel 
add OD code for tianma nt37701 6.55 inch panel
for rhode

Change-Id: I72358d4818cac782128228a92e10aa48e7a7e845
Signed-off-by: tanhua1 <tanhua1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2198626
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Lu Lu <lulu2@lenovo.com>
2023-05-31 17:01:05 -03:00

392 lines
13 KiB
Devicetree
Raw Blame History

/* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&mdss_mdp {
mot_tm_nt37701_655_1080x2400_dsc_cmd_v1: qcom,mdss_dsi_mot_tm_nt37701_655_1080x2400_dsc_cmd_v1 {
compatible = "qcom,mdss-dsi-panel";
qcom,mdss-dsi-panel-name = "mipi_mot_cmd_tm_1080p_dsc_655";
qcom,mdss-dsi-panel-supplier = "tianma";
qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
qcom,mdss-dsi-virtual-channel-id = <0>;
qcom,mdss-dsi-stream = <0>;
qcom,mdss-pan-physical-width-dimension = <68>;
qcom,mdss-pan-physical-height-dimension = <152>;
qcom,mdss-dsi-bpp = <30>;
qcom,mdss-dsi-underflow-color = <0xff>;
qcom,mdss-dsi-border-color = <0>;
qcom,mdss-dsi-panel-param-verision = <121201>;
qcom,mdss-dsi-panel-param-num = <5>;
qcom,dsi-ctrl-num = <0>;
qcom,dsi-phy-num = <0>;
qcom,mdss-dsi-traffic-mode = "burst_mode";
qcom,mdss-dsi-bllp-eof-power-mode;
qcom,mdss-dsi-bllp-power-mode;
qcom,mdss-dsi-lane-0-state;
qcom,mdss-dsi-lane-1-state;
qcom,mdss-dsi-lane-2-state;
qcom,mdss-dsi-lane-3-state;
qcom,mdss-dsi-dma-trigger = "trigger_sw";
qcom,mdss-dsi-mdp-trigger = "none";
qcom,mdss-dsi-reset-sequence = <0 11>, <1 1>, <0 1>, <1 11>;
qcom,mdss-dsi-lp11-init;
qcom,mdss-dsi-tx-eot-append;
qcom,mdss-dsi-te-pin-select = <1>;
qcom,mdss-dsi-te-dcs-command = <1>;
qcom,mdss-dsi-te-using-te-pin;
qcom,bklt-dcs-2bytes-enabled;
qcom,mdss-dsi-bl-min-level = <3>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
/*qcom,mdss-dsi-panel-hdr-enabled;
qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
17000 15500 30000 8000 3000>;
qcom,mdss-dsi-panel-peak-brightness = <4200000>;
qcom,mdss-dsi-panel-blackness-level = <3230>;*/
qcom,mdss-dsi-hbm-on-command = [
39 01 00 00 00 00 03 51 0F FF];
qcom,mdss-dsi-hbm-off-command = [
39 01 00 00 00 00 03 51 0D BA];
qcom,mdss-dsi-hbm-fod;
qcom,mdss-dsi-hbm-fod-on-command = [
39 01 00 00 00 00 03 51 0F FF];
//qcom,mdss-dsi-acl-on-command = [
// 39 01 00 00 00 00 06 F0 55 AA 52 08 00
// 15 00 00 00 00 00 02 B0 0C
// 15 01 00 00 00 00 02 55 05];
//qcom,mdss-dsi-acl-off-command = [
// 15 01 00 00 00 00 02 55 00];
qcom,mdss-dsi-dc-off-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 11
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 07 B2 60 50 66 91 86 91
39 00 00 00 00 00 0D B3 00 08 01 5F 01 5F 02 A4 02 A4 03 BB
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 03 BB 05 2F 05 2F 06 91 06 91 06 92
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 06 92 0A 2F 0A 2F 0D B9 0D B9 0F FF
15 01 00 00 00 00 02 58 00];
qcom,mdss-dsi-dc-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-dc-on-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 91
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 07 B2 60 50 60 00 80 00
39 00 00 00 00 00 0D B3 00 00 00 00 00 00 00 00 00 00 00 00
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 00 00 00 00 00 00 00 00 00 00 00 00
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 06 92 0A 2F 0A 2F 0D B9 0D B9 0F FF
15 01 00 00 00 00 02 58 01];
qcom,mdss-dsi-dc-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-display-timings {
timing@0{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <48>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <16>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <4>;
qcom,mdss-dsi-v-front-porch = <12>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
15 01 00 00 14 00 02 2F 08 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 06
39 01 00 00 00 00 04 B5 00 18 4F //swire pulse
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 11
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 07 B2 60 50 66 91 86 91
39 00 00 00 00 00 0D B3 00 08 01 5F 01 5F 02 A4 02 A4 03 BB
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 03 BB 05 2F 05 2F 06 91 06 91 06 92
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 06 92 0A 2F 0A 2F 0D B9 0D B9 0F FF
15 01 00 00 00 00 02 58 00 //DC off
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 08
15 00 00 00 00 00 02 C3 04
39 00 00 00 00 00 06 F0 55 AA 52 08 03
39 00 00 00 00 00 05 BC 11 00 09 51
15 00 00 00 00 00 02 6F 04
39 00 00 00 00 00 0A BC 00 09 51 00 09 51 00 0B 41
15 00 00 00 00 00 02 6F 0D
39 01 00 00 00 00 04 BC 00 11 51
39 00 00 00 00 00 06 F0 55 AA 52 08 00
39 00 00 00 00 00 0D C6 66 66 66 66 66 66 66 66 66 66 66 66
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 1C
39 00 00 00 00 00 06 C0 15 0A 38 27 49
15 00 00 00 00 00 02 03 01
15 00 00 00 00 00 02 90 01
39 00 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
15 00 00 00 00 00 02 2C 00 //dsc config 10bit
15 00 00 00 00 00 02 6F 01
39 01 00 00 00 00 05 88 02 1C 08 73 //Local HBM X/Y
15 01 00 00 00 00 02 5F 00
39 01 00 00 00 00 03 51 00 00
15 01 00 00 00 00 02 53 20
15 01 00 00 00 00 02 35 00 //te enable
39 01 00 00 00 00 05 2A 00 00 04 37
39 01 00 00 00 00 05 2B 00 00 09 5F
15 01 00 00 00 00 02 2F 08 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
05 01 00 00 78 00 01 11
05 01 00 00 00 00 01 29]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 00 00 01 28 /* display_off */
05 01 00 00 78 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <10>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
timing@1{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <60>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <16>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <4>;
qcom,mdss-dsi-v-front-porch = <12>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
15 01 00 00 10 00 02 2F 03 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 06
39 01 00 00 00 00 04 B5 00 18 4F //swire pulse
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 11
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 07 B2 60 50 66 91 86 91
39 00 00 00 00 00 0D B3 00 08 01 5F 01 5F 02 A4 02 A4 03 BB
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 03 BB 05 2F 05 2F 06 91 06 91 06 92
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 06 92 0A 2F 0A 2F 0D B9 0D B9 0F FF
15 01 00 00 00 00 02 58 00 //DC off
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 08
15 00 00 00 00 00 02 C3 04
39 00 00 00 00 00 06 F0 55 AA 52 08 03
39 00 00 00 00 00 05 BC 11 00 09 51
15 00 00 00 00 00 02 6F 04
39 00 00 00 00 00 0A BC 00 09 51 00 09 51 00 0B 41
15 00 00 00 00 00 02 6F 0D
39 01 00 00 00 00 04 BC 00 11 51
39 00 00 00 00 00 06 F0 55 AA 52 08 00
39 00 00 00 00 00 0D C6 66 66 66 66 66 66 66 66 66 66 66 66
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 1C
39 00 00 00 00 00 06 C0 15 0A 38 27 49
15 00 00 00 00 00 02 03 01
15 00 00 00 00 00 02 90 01
39 00 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
15 00 00 00 00 00 02 2C 00 //dsc config 10bit
15 00 00 00 00 00 02 6F 01
39 01 00 00 00 00 05 88 02 1C 08 73 //Local HBM X/Y
15 01 00 00 00 00 02 5F 00
39 01 00 00 00 00 03 51 00 00
15 01 00 00 00 00 02 53 20
15 01 00 00 00 00 02 35 00 //te enable
39 01 00 00 00 00 05 2A 00 00 04 37
39 01 00 00 00 00 05 2B 00 00 09 5F
15 01 00 00 00 00 02 2F 03 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
05 01 00 00 78 00 01 11
05 01 00 00 00 00 01 29]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 00 00 01 28 /* display_off */
05 01 00 00 78 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <10>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
timing@2{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <90>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <16>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <4>;
qcom,mdss-dsi-v-front-porch = <12>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
15 01 00 00 0b 00 02 2F 07 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 01 00 00 00 00 06 F0 55 AA 52 08 00
15 01 00 00 00 00 02 6F 06
39 01 00 00 00 00 04 B5 00 18 4F //swire pulse
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 11
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 07 B2 60 50 66 91 86 91
39 00 00 00 00 00 0D B3 00 08 01 5F 01 5F 02 A4 02 A4 03 BB
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 03 BB 05 2F 05 2F 06 91 06 91 06 92
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 06 92 0A 2F 0A 2F 0D B9 0D B9 0F FF
15 01 00 00 00 00 02 58 00 //DC off
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 08
15 00 00 00 00 00 02 C3 04
39 00 00 00 00 00 06 F0 55 AA 52 08 03
39 00 00 00 00 00 05 BC 11 00 09 51
15 00 00 00 00 00 02 6F 04
39 00 00 00 00 00 0A BC 00 09 51 00 09 51 00 0B 41
15 00 00 00 00 00 02 6F 0D
39 01 00 00 00 00 04 BC 00 11 51
39 00 00 00 00 00 06 F0 55 AA 52 08 00
39 00 00 00 00 00 0D C6 66 66 66 66 66 66 66 66 66 66 66 66
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 1C
39 00 00 00 00 00 06 C0 15 0A 38 27 49
15 00 00 00 00 00 02 03 01
15 00 00 00 00 00 02 90 01
39 00 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
15 00 00 00 00 00 02 2C 00 //dsc config 10bit
15 00 00 00 00 00 02 6F 01
39 01 00 00 00 00 05 88 02 1C 08 73 //Local HBM X/Y
15 01 00 00 00 00 02 5F 00
39 01 00 00 00 00 03 51 00 00
15 01 00 00 00 00 02 53 20
15 01 00 00 00 00 02 35 00 //te enable
39 01 00 00 00 00 05 2A 00 00 04 37
39 01 00 00 00 00 05 2B 00 00 09 5F
15 01 00 00 00 00 02 2F 07 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
05 01 00 00 78 00 01 11
05 01 00 00 00 00 01 29]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 00 00 01 28 /* display_off */
05 01 00 00 78 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <10>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
};
};
};
Reference in new issue View Git Blame Copy Permalink