The jiffies value is only recorded in the charging state,
and it needs to be cleared in other states.
Change-Id: I9beb3465a24784d35399c10733416f3104269678
Reviewed-on: https://gerrit.mot.com/2601217
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
use the battery voltage estimated by the fuel gauge in charging logic,
not the adc value of the charge pump.
Change-Id: Ia001e41dc909ce3ec57ddbcfe888a7b566ad358a
Reviewed-on: https://gerrit.mot.com/2599627
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
In order to debug the problem of fuel gauge soc jumping,
add some debug logs,
Change-Id: I5b6adf50d496126059366a0c322915a0f533acd4
Reviewed-on: https://gerrit.mot.com/2567828
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
The unit of thermal_fcc_ua is ua, but the
unit of target_fcc is ma.
Change-Id: Ic7065344f417adbd840efe473005861a69428e70
Reviewed-on: https://gerrit.mot.com/2536876
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
sc760x:
If there is no user configuration, set the value of thermal limit.
Change-Id: I0866031ab7f33445846d868d2fa4202c51812185
Reviewed-on: https://gerrit.mot.com/2532545
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Transfer the target fcc value of the flip battery to the main battery
through glink for power dynamic configuration.
Change-Id: I3b8b2029e5f5cdf1b7ccc49fd7ce32a63b94c957
Reviewed-on: https://gerrit.mot.com/2520452
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
When the device shutdown due to unplugging the charger in factory mode,
we need to check the status of the charger again.
Change-Id: I43160b0802a700be88542427bad8a75fcd4a4e13
Reviewed-on: https://gerrit.mot.com/2512562
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Disable charging if charger input is not ready in case the
charger input current limit does not match the target.
Change-Id: I8bc2a3b10e18c5dd7b034c760731bb04f3c0d4ca
Reviewed-on: https://gerrit.mot.com/2440276
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Only when wireless charging is used, re-judgment whether it is online
or not. but wired charging maintains the previous online status.
Change-Id: I01b2074f496867237fc733645a088329e5432818
Reviewed-on: https://gerrit.mot.com/2442366
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reconfigure the charger when charger IC reset
or user input.
Change-Id: I71f910b122fd1e64c22521bc4cf72dfb3dae7ee1
Reviewed-on: https://gerrit.mot.com/2427353
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
When the user sets the input current limit or constant
charge current through sysnodes, these values are fixed
and do not charge with other logic.
Change-Id: Iea171ce60ab6e1c1605a7dc89aadaecaecaba4c1
Reviewed-on: https://gerrit.mot.com/2423701
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
In order to reduce stylus writing latency,MotoNote read touch data from
touch driver via goodix_pendev character device directly,this change
bypass the HAL layer and input subsystem.
Change-Id: Iccb121336992574f03fb89ff5cf4cc074ff3dc50
Reviewed-on: https://gerrit.mot.com/2247007
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Fix goodix touch driver build error that variable defined but not
used and return value not match.
Change-Id: Ibded582ff67e524be8b148592e8577f4864417c8
Reviewed-on: https://gerrit.mot.com/2265448
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Support receiving dual-screen notifications to support
touch ic suspend and resume.
Change-Id: I2af3fb7632ca164c85626957f42c0d3dca2af179
Reviewed-on: https://gerrit.mot.com/2188839
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Reviewed-by: <zhuwg1@motorola.com>
Submit-Approved: Jira Key
TP:
When sending multiple commands at the same time, the ack signal of
unexpected commands may be read, resulting in command sending errors.
Change-Id: I6f222a20725f5adc1509a01bd29f972c3171e56d
Reviewed-on: https://gerrit.mot.com/2178632
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
TP:
1. Open the esd check function,when the touch IC dies, it can be
restored to normal by hardware reset.
2. Increase the delay between the stylus command and the clock to
prevent the IC from hanging up.
Change-Id: I20617d63c0d53d60d1100b9eb26182096c657b16
Reviewed-on: https://gerrit.mot.com/2164520
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
When the screen is off, the TP driver starts to read gesture events
after receiving the interrupt.But I2C bus is still in the suspended
state, so gesture events cannot be read out.
geni_i2c_xfer System suspended
[GTP-INF][goodix_i2c_read:82] I2c read retry[1]:0x10308
geni_i2c_xfer System suspended
[GTP-INF][goodix_i2c_read:82] I2c read retry[2]:0x10308
[GTP-ERR][goodix_i2c_read:87] I2c read failed,dev:5d,reg:10308,size:26
[GTP-ERR][gsx_gesture_ist:236] failed get gesture data
Change-Id: If3ebbc4b65829def142835c51816b70e0a474865
Reviewed-on: https://gerrit.mot.com/2158726
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
When exiting the stylus mode, the IC will send an abnormal reset
interrupt. At this time, the stylus will be enabled again,
but because the stylus clock is closed, the touch will not work.
Change-Id: Id1b393de2b2bee5b06e9d4f5b74dfd301be4547d
Reviewed-on: https://gerrit.mot.com/2150837
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
Record the value of the received mode from system and the value
successfully set to the touch IC.
Change-Id: Ie10f25be6d0d9fe9d21cf385a626496cc9aedfa5
Reviewed-on: https://gerrit.mot.com/2144916
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
Support film sensitivity function in RoguePRC project.
Change-Id: I830adb55e9b9b93aef6dc90d757ef9eaf206a2cb
Reviewed-on: https://gerrit.mot.com/2134201
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1. If the interpolation mode is disabled, the report rate is the
default 240Hz(Hiphic) or 360Hz(Hiphi)
2. If the interpolation is enabled and the refresh
rate is 144Hz, the reporting rate is 576Hz(Hiphic) 720Hz(Hiphi)
3. At other refresh rate, if the interpolation mode is enabled, the
report rate is 480Hz(Hiphic) 720Hz(Hiphi).
Change-Id: Ibcd6ba61457e5e5f6fd32a6583f5bdcada531fc5
Reviewed-on: https://gerrit.mot.com/2134669
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Goodix IC requires device confirm within 50ms after power on.
If this time exceeds 50ms, the i2c firmware will colse the
spi channel, and the spi firmware will close the i2c channel.
Change-Id: I178cea55e280ffb53fca444cdd8ed32905a928c5
Reviewed-on: https://gerrit.mot.com/2133988
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
When entering the deepsleep state, touch IC will power off,
so there is no need to send the suspend command.
Change-Id: I6b6a3b29eb3b1acee6c72db2b97fdb90710f25bc
Reviewed-on: https://gerrit.mot.com/2134059
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
request pm_qos during the interrupt processing to prevent
the CPU from going to sleep state.
Change-Id: I95728329c7df7a4376415b9d8ec20d6525fe45c8
Reviewed-on: https://gerrit.mot.com/2124280
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
TP:
If the noise detection fails after calibration, the touch IC will
report the "F3 E0" event, and when the event is received,
the touch driver will send the calibration command again.
Change-Id: Ifd2f4bd287fbdc7861a127d2ffd481f635d963c7
Reviewed-on: https://gerrit.mot.com/2123149
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
request pm_qos during the interrupt processing to prevent
the CPU from going to sleep state.
Change-Id: I78a67ef1aa9a363e9d7f9546b8d4c20a81ac04c4
Reviewed-on: https://gerrit.mot.com/2107618
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
Support Pmk8350 gpio3 as the stylus clock for Rogue PVT, and the
output frequency is 19.2Mhz.
Change-Id: I5dae054b6170b921b7afee1853b7de7995531705
Reviewed-on: https://gerrit.mot.com/2111742
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
TP:
Since the sensitivity node is a general node in the framework,
the judgment of the mode value is increased.
Change-Id: I82d2727e8ebd60c96c13edf2dd923630dc828290
Reviewed-on: https://gerrit.mot.com/2116173
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1. Add the function of leather mode in the
univeral interface sensitivity.
2. The mode setting instructions are as follows:
mode = 0x00/0x01 Exit/Enter film sensitivity mode.
mode = 0x10/0x11 Exit/Enter leahter sensitivity mode
Change-Id: I35d49aaf225e8b941a4f2552a2ccd9d33a34dd92
Reviewed-on: https://gerrit.mot.com/2113437
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1. Close the stylus clock when system suspend and the stylus
mode exits.
2. Add 16ms delay between each command.
Change-Id: I6dff47410315272167d47a733b1058736f72c737
Reviewed-on: https://gerrit.mot.com/2108295
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
Support goodix single tap to wake the device.
Change-Id: I038edf7655f6944653d22e13c3ec056baca77084
Reviewed-on: https://gerrit.mot.com/2105483
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
The PM_WAKEUP_EVENT causes a delay of more than 4ms before
starting i2c transmission.
Change-Id: Id5dc406f8e7b675c4d34597b37fa12992cdb24d6
Reviewed-on: https://gerrit.mot.com/2098214
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
Not use the PM suspend and resume process, but use
the touchscreen class unified process control.
Change-Id: I8d104c0b44abba22d624187cf351d2fd2eb4fe0f
Reviewed-on: https://gerrit.mot.com/2097211
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
1. In the case of firmware damage, the input device is directly released
when probe, and the input device is accessed when the system is
suspended, causing the system crash.
2. When the firmware is damaged, because the product information cannot
be read, the touch upgrade script cannot repair the firmware.
So we need to use the ic_name in the dtbo file.
3. When probing, if obtaining the configuration file fails, reflash the
configuration file after the firmware upgrade is completed.
Change-Id: I10cf96e3721d539d6e15f4c6cc490eb0f4328700
Reviewed-on: https://gerrit.mot.com/2095432
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
1. dsi_freq_head is undefined, so add Module.symvers of display driver.
2. Use the KBUILD_OPTIONS to pass the configuration parameters to
the Kbuild filed.
Change-Id: I24d792a26cb1d3a9f8beca8089cea7116ae1a669
Reviewed-on: https://gerrit.mot.com/2097103
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
1. Modify the factory test code
2. Modify the waiting time during the firmware upgrade process.
3, Report the tile_x and tile_y of stylus.
Change-Id: I8e398ff731e59b179edf28c6d5cd5923ec0083fe
Reviewed-on: https://gerrit.mot.com/2090807
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1. Modify the config id to touch class common time format.
2. The reset operation has been performed after powe on,
so delete the redundate reset operation.
Change-Id: Ia93c8491c62f51d7effc56479462bb90a7a43c9f
Reviewed-on: https://gerrit.mot.com/2075360
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
The kobject_get_path function is not in Google's
whitelist, so reimplement the function.
Change-Id: I162e4d91cc5d8e918da1e7497fba7d48df9e86ef
Reviewed-on: https://gerrit.mot.com/2076930
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP
The kernel_write is not in google white list, and we only need the test
data saved during the factory build.
Change-Id: Iad0cb0a32902af116425ef26d53397d53973f7db
Reviewed-on: https://gerrit.mot.com/2075505
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Because 9916 and 9916P use the same firmware file and configuration file,
so the chip does not need to distinguish between 9916 and 9916P.
Change-Id: I08921833b01ee1700bd6c81bbf10e204e57b080a
Reviewed-on: https://gerrit.mot.com/2070699
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
1. support matching limit files of multiple panels.
2. save the test results, and the file name contains the test time
and panel name.
Change-Id: Ife15047d24b39680a1c0c94f9c405796c35be47d
Reviewed-on: https://gerrit.mot.com/2068602
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
Support loading different configuration files according to
the panel name.
Change-Id: Ibe6d99c99f08951b35100921c4eaa587048aee1f
Reviewed-on: https://gerrit.mot.com/2062784
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
TP:
Delete the symbol ^M at the end of each line of the driver code.
Change-Id: Icf5b64b01ae3c27c1d942e0d0d02056f32cb41c8
Reviewed-on: https://gerrit.mot.com/2038562
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
In Android S-8450, the bootconfig feature begins enable.
So that androidboot.bootreason canot be found in the cmdline.
And compatibility has been done in mmi_info.
Change-Id: I96b3d9ed988416c640c0b115cdad9fe1fd11a34b
Reviewed-on: https://gerrit.mot.com/2020001
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
After successfully finding the drm panel, set panel_status to 0,
otherwise it will re-schedule work and continue to look for drm panel.
Change-Id: I121d24a66d518b75b73d130b18394c4d7ffead11
Reviewed-on: https://gerrit.mot.com/2021004
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
When there is no need to find the active panel, that is,
the panel_status is always 0, register panel notifier normally.
Change-Id: I2aef34a1fd7ca310bf1fc6a4d9501413208d14c9
Reviewed-on: https://gerrit.mot.com/2019893
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
When the touchscreen modules loads faster than display,
the acive panel may not be found. So we look for the
active panel again through delay work.
Change-Id: Ife617c4cf19035120c5f381bb6da8f28346a9f34
Reviewed-on: https://gerrit.mot.com/2013538
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
TP:
After the touch fwupate, if the config id is different
from before, the calibration operation will be tiggered.
But try not to add calibration operations in touch driver.
Change-Id: Id82c331c4617a03cb2351987380eae96d837fb7e
Reviewed-on: https://gerrit.mot.com/2002079
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1. When the interpolation is disabled, the report rate is 240Hz;
2. When the interpolation is disabled, and the refresh rate is 144Hz,
the report rate is 576Hz, else the report rate is 480Hz.
Change-Id: I863154a271d5968aab36d0bc3366f4597a30808d
Reviewed-on: https://gerrit.mot.com/2001030
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
1. Add DRM_PANEL_EVENT nofification for Andorid S.
2. support touchscreen_mmi and related modules build in kernel-5.10.
3. Use timespec64 instead of timespec function.
Change-Id: If0252015e10bff24c10d54b13df2e0f6aa156a6e
Reviewed-on: https://gerrit.mot.com/1965128
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
The kernel does not have permission to access the /data/vendor
partition, so send the update firmware notify to touchUpg service
on resume for zero-flash touch IC.
avc: denied { search } for name="param" dev="dm-6" ino=275
scontext=u:r:kernel:s0 tcontext=u:object_r:param_data_file:s0
tclass=dir permissive=0
Change-Id: I5d5c9f39bab25a8d3377e0475e79a0411d93b56b
Reviewed-on: https://gerrit.mot.com/1979786
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Submit-Approved: Jira Key
Support to upgrade TP firmware through the
Parameter APK.
Change-Id: I370e175db38ab7f5de3aa4cc5aabae7ea2f219c6
Reviewed-on: https://gerrit.mot.com/1979783
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Submit-Approved: Jira Key
Add sense off process berfore sense on to avoid
the problem that tp firmware cannot exit the
gesture mode normally.
Change-Id: Ibb7a8572c168f8c4427c868fd8075ea086138243
Reviewed-on: https://gerrit.mot.com/1973335
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
When using drm panel notifications, there is a problem with
the display and touch loading sequence, which may cause TP to fail to
find the active panel and thus fail to receive the display notification
So use panel notificaitons to avoid the issue.
Change-Id: I7269436bd8117db74467050d4cb839353efdf1a0
Reviewed-on: https://gerrit.mot.com/1962331
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
TP:
The touch_set_state function will only be used when the
NVT_SET_TOUCH_STATE configuration is enabled. So add the
configuration to avoid compilation errors.
Change-Id: I832362899339c3465f475c13bb654a73216d8e9c
Reviewed-on: https://gerrit.mot.com/1960799
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
When link binary object, touch_set_state is undefined,
No kernel symbal table was imported.
Change-Id: Ibd1cde478b08308d14fdba210ae3a61cd9887ff5
Reviewed-on: https://gerrit.mot.com/1957708
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
Support novatek single tap function in berlin NA.
Change-Id: I8f1d8d82b919b20fcba4812a74f247399a097ddf
Reviewed-on: https://gerrit.mot.com/1955575
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
When link binary object, panel_register_notifier is undefined,
No kernel symbal table was imported.
Change-Id: I539793e5aa2bd2d27d8ed9b959d9bef86739b26c
Reviewed-on: https://gerrit.mot.com/1957707
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Submit-Approved: Jira Key
litong20