Panel API need to report probe status in order for consumer to
determine panel's presence
Port from: 834d504
Change-Id: I971b6ea68f97fb047e0c3f62ec23ae042c4b21d6
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444403
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509806
Reviewed-by: Hua Tan <tanhua1@motorola.com>
This dsi_display_is_panel_enable(int panel_index) API will take in
panel_index equal 0 for Primary and 1 for Seconday display. It will
return TRUE if the panel is ON or FALSE when it's OFF
Port from: 255270c
Change-Id: Idbc4cc507336104d941a6b2868f9bdf47e5bdaa2
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444402
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509805
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Adding the KMS property (HBM/ACL) testing functionality to
motUtil tool so these KMS property can be tested and verified as
standalone without supporting of the Android FW apk.
Port from: b345943
Change-Id: I825a1450f5b151025cc005fe45748bbae40c30bc
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444401
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509803
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Add the display's param feature such as HBM, ACL, or CABC feature to
display framework
Port from: f988eb8
Change-Id: I445ea7e58188d2354888e2202ed7119bf2e55fc9
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444400
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509802
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Add the Display Utility(DispUtil) support to the motUtil Debugfs Framework.
This dispUtil tool will send a command from the motUtil debugfs to the panel
or it can read any information from panel back.
The 1st byte (set to 0) will indicate for the displUtil tool.
DispUtil Format:
1st 2nd 3rd 4th 5th 6th
0=DispUtil 0=Pri Disp 0=write 0=HS 0=DCS number byte to read
1=Sec Disp 1=read 1=LP 1=Generic
7th 8th 9th....
payldLen_u payldLen_l payload
Port from: 79ee37d
Change-Id: Ib95d46342915543f942926df167e915cdd733252
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444398
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509800
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Adding the motUtil debugfs in /d/dri/0/debug to provide a tool for
developer/tester to interface with the Display driver framework
Port from: 11cb128
Change-Id: I5a385f9f789b56f7a36bde865234325039ec5e36
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444397
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509799
Reviewed-by: Hua Tan <tanhua1@motorola.com>
After the ESD detection and recovery keep trying to recover panel, but
after 5 times, unsuccessfully recovery the panel, then cal BUG to reboot
the phone.
Port from: 9a4d104
Change-Id: Ibd1aa3e4d83638c029c163fe1de88d7ef4ba5fe2
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444396
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509798
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Check display turns on during the display resume. If it doesn't, then
trigger the ESD to restart the panel, instead waiting until the ESD
thread starts, detects, and perform ESD recovery.
Port from: f1cfef0
Change-Id: Ib7c0f2451b5e5cf1630b6335ac1d7ce1ff332d22
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444395
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509797
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Check the panel's power_mode after it turns on, to see if the panel can turn
on correctly. If it doesn't not, then trigger the ESD recovery to fix it.
Port from: 0301a79
Change-Id: I7e6cdb099dd50559f570e201568479ba00aa0e66
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444394
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509796
Reviewed-by: Hua Tan <tanhua1@motorola.com>
After the Boot Loader (BL) detects the panel information, or reading
the ESD UTAG setting, the BL will write these information to the DTS.
The display driver from kernel and parse and save these setting.
Port from: 61c3e44
Change-Id: I3759b73c2e1eff01269a42dfa11d20807affa17a
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444393
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509795
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Change the ESD detection and recovery interval to 8 second
Port from: 1318dae
Change-Id: I530c74592941ff2cd68362224179d38df3ef8f60
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1444392
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509794
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Add a new display's backlight type "bl_ctrl_dummy". With this
backlight type, the panel backlight driver will ignore any backlight
requests. This new backlight type will be used with a bare_board or
no-display configuration and the display driver doesn't need to have
any communication with panel.
Port from: cfb2acd
Change-Id: I2108d7477009d06ac350ca49c380b64c9d004f65
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1442424
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509792
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Normal, there is a brightness level from 0-255 (1 byte), but some
panels are support 2 bytes for brightness, (0-1023).
Port from 68e0c10
Change-Id: Id948d3d97fb3611e458b18a3345cec6a64e5c034
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1410291
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1509791
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Power on reset value of DPTX_CONFIGURATION_CTRL.ASSR (alternate scrambler
seed reset) is high. This fails link training 2 with TPS4 pattern.
Change disables this before link training starts.
Change-Id: Iee95de04625658254b242afdcbba6db24a52606d
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Navjyot SINGH <quic_navjsing@quicinc.com>
Currently the panel esd_recovery_pending flag is cleared for every mode
set. The ESD recovery completes only after the suspend and resume. Clear
the flag only during power on commit.
Change-Id: I97e370feba0aad34558e4675168b4bcb7f5901ca
Signed-off-by: Srihitha Tangudu <quic_tangudu@quicinc.com>
Correct DSC 1.1 rate control parameter related to
8 bpc 8 bpp configuration according to VESA DSC
specification.
Change-Id: I4b17c61f79ea2b497cbf243a2b99c9b40a9b7ea8
Signed-off-by: Raghavendra Ambadas <quic_c_rambad@quicinc.com>
adjust aux channel by dts setting.
support max resolution cfg by dts.
Change-Id: I13e48630cf62edc6353f13d0f42cadb2cbd9423d
Signed-off-by: xiangxuy <quic_xiangxuy@quicinc.com>
Large allocations using kzalloc can lead to timeouts. This updates
the allocation calls accordingly to use vzalloc to remove
requirements on contiguous memory.
Change-Id: Ica54483787509ed0e9283289fc9d523e8cde9238
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
Signed-off-by: Jayaprakash Madisetty <quic_jmadiset@quicinc.com>
In RSC disabled targets during display bootup with continuous
splash constant ab and ib votes are set. Upon issuing first
commit these values gets updated and at the end of first commit
on release of splash resource the votes are removed using
sde_power_data_bus_set_quota API. On the very next commit if
bandwidth is changed from previous commit, new BW voting is
reflected else the disable splash vote exists and underruns are
seen. This patch removes the downvote and fixes the underruns
seen in video mode in targets for which rsc is disabled.
Change-Id: I628d426ad11c703dd972be89fa998588c53a57bb
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
Currently we are enabling all the lanes irrespective of the
lanes we are actually going to use. Add support to enable
only those lanes that are required and thus save power.
Change-Id: I9aae76eeaa05a79337d4e4b1f2e36ea9842bd580
Signed-off-by: Srihitha Tangudu <quic_tangudu@quicinc.com>
DCS commands triggered right after timing engine enable can conflict
with blanking period causing command transfer failures. Right after
timing engine enable poll for frame start and line count reaching
active region of display before any DCS commands.
Change-Id: Ia3967e01c3bb5bc82aa3549c300fa8335e00210c
Signed-off-by: Prabhanjan Kandula <quic_pkandula@quicinc.com>
Signed-off-by: Srihitha Tangudu <quic_tangudu@quicinc.com>
With requirements to support an increased number of display modes,
the current size of sde_kms_info is insufficient. This change
increases the sde_kms_info max size.
Change-Id: Ie0f29003732870dad9ce31ee7d484e84f12ba542
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
In dual display usecase when both displays comes out of
idle following scenario will cause wr_ptr timeout.
1. Both displays goes to idle and RSCC enters Mode-2.
2. Primary display exit idle upon DRM commit N RSC
enters Solver State.
3. Secondary display exits idle upon DRM commit M and
waits on input fence after CTL_1_PREPARE is set.
RSC is still in CMD state.
4. Primary Commit N frame transfer got successful and
commit N+1 is queued in primary display when RSC
in solver state which leads to timeout in primary.
This is because RSCC will not generate a wakeup in sync with
primary timelines leading to timeout. This is because RSCC
still sees idle low thinking frame transfer is taking long
time. This change will switch the rsc state to AMC mode
before CTL_PREPARE is set which resolves such issue.
Change-Id: Ic32e48b4febbbcc54d94876194d38fe6ef3d0981
Signed-off-by: Mahadevan <mahap@codeaurora.org>
Signed-off-by: Raghavendra Ambadas <quic_c_rambad@quicinc.com>
Add logic in DP driver to parse "label" dt property.
This info will be useful to configure DP as primary
or secondary.
Change-Id: I708179c5940c82256034bc6c8338b01ee52f2f79
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
This change handles partial update use case transitions. Rounded
corner should be programmed to full ROI when transitioning out of
partial update use case.
This change also clear cached ROIs when rounded corner feature is
disabled to ensure full frame ROI for first frame when feature
is enabled again. This change depends on HAL change to disable PU
for one frame when RC mask config is set.
This change also moves cached rectangles from crtc state to crtc
structure to avoid cached rectangles being incorrect due to race
conditions between updating cached rectangles in crtc state and
duplicating crtc state when next commit starts.
Change-Id: I4c48ccd3f64409d1b0fa19f0e6f92eab5f86d099
Signed-off-by: Anjaneya Prasad Musunuri <aprasad@codeaurora.org>
Currently, driver expects usermode to set RC blob flags based on
the RC PU use case, which causes issue when commits are staggered
and is unnecessarily reprogramming RC mask data on every PU frame.
This change uses existing driver logic to internally determine the
RC PU use case and programs the RC region enable bits accordingly.
It also adds essential logging in RC functions to help debugging.
Change-Id: I19ae59a79dbee20f357b384c12acd7d2a6a93fb4
Signed-off-by: Anjaneya Prasad Musunuri <aprasad@codeaurora.org>
Clear partial update mask during last close to avoid
rounded corner to be programmed without valid mask during
shell stop/start operations.
Change-Id: I378adc62b5bc5913abfc32fa3528c8e28ea273d4
Signed-off-by: Anjaneya Prasad Musunuri <aprasad@codeaurora.org>
This change updates rsvp_cur pointer to latest to avoid use
after free issues. rsvp_cur pointer can be freed in few cases due
to the unlock, wait and lock of rm_lock present in
_sde_rm_poll_get_rsvp_nxt_locked.
Change-Id: I389048188e8a615edc3e75dd1102d4ca8c74af65
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
During mode enable after idle, rsvp next would be set without
rsvp cur. Back to back test only should be serialized, but currently
this would be possible right after idle. This is established by
commit 11aab5f9c382 ("disp: msm: sde: Fix null dereference errors").
This change updates the condition to poll for rsvp next clear
during this usecase as well.
Change-Id: I300254967cbec69fff8b31545b8d659afc56f283
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Drm file is not set to NULL after freeing it from drm
release. This can result in use-after-free issues in
some scenarios. Add a mutex lock and other proper null
checks to prevent such issues.
Change-Id: Ic35b0a76166b0f47a354b1737e6f4c3ac1437ed4
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Signed-off-by: Althaf Neelanchirayil <aneelanc@codeaurora.org>
At present, code is checking only for MSM_REQ_ACK flag which is set for
read commands and ignores all other flag states.
This fix takes all the different states that are configured as the DSI
Command MIPI Flag states and sets it.
Also, added the backlight brightness control support with different DCS
command(0xC2) to update backlight brightness.
Change-Id: I689e902e7d997afcb629084e89e42361bf1c685b
Signed-off-by: Rajesh Bharathwaj <rajeshbharathwaj@codeaurora.org>
Konstantin Makariev