Before communicate with touch IC after receive gesture irq,need wait pm
resume success or read gesture data will fail.
Change-Id: I55cfdc41244e1b9f159770046be64bed337f0d18
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2558492
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Power on sequence spend much time and
blocking display on.
Change-Id: Ib131c07dc85227ca761a22a510787202c08b77a7
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2511335
Reviewed-by: Jianqi Yang <yangj@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Add timestamp node for CLI FTS touch,back tap function will read out
last touch event time to support back tap.
Change-Id: I084e6df4cfdb744ccca941de3f238f0fb4300d3f
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2504214
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Add a sysfs node to control if support touch under water detection in
case affecting power consumption test.
echo 2 > /sys/class/touchscreen/primary/liquid_detection_ctl //not support
echo 3 > /sys/class/touchscreen/primary/liquid_detection_ctl //support
Change-Id: Iab8173ccae34749b0ac749461953df086e9fd0f9
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2473282
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ping Xiao <xiaoping@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
1.Support GPIO enable pin and power supply name to control power
2.Change pinctrl state name to diff with main touch.
Change-Id: I2bcfbd1a40876a5b8f61949fc25be682017e93df
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2460988
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
This new protocol supports touch high resolution,for example 8X/10X/16X,
but it's not compatible with previous protocol,so need use macro to control.
Change-Id: Ib9e8590cd3cf05ba88b83f33fab552909c2d9a5e
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2399367
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Support touch sensitivity in game mode for zeekr,default touch report rate
is 240HZ and high report rate is 360HZ.
Change-Id: Ifa7d82cc11774212e7c6b3cf9bee3517e417d031
Signed-off-by: wenge zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2396020
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Add a macro to control if cli_gesture created,only if CLI touch supports
double tap gesture,this node should be created to receive gesture type
notifications.
Change-Id: I2a877b4257c758c1129c1bb3353cfbe59f2a452d
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2391205
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shicheng Gong <gongsc1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Add single tap and double tap gestures support for focaltech touch IC,
gesture type receives from touch mmi class.
Change-Id: Ib67d221eff3217b46f9b423b84426ef44f774826
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2384855
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1.Add cli_gesture sysfs node on mmi touch screen class,use this node to
notify which gesture type that user set.
2.Create another tap sensor named s-dt-gesture,use it to report CLI
touch gesture events.
Change-Id: I9e954a00a2a5f37ff54be08d99c0b904516a57b7
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2381634
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Because pinctrl names are same with another touch driver and GPIO pin
numners are not same,so make compatible for another pinctrl name.
Change-Id: I42ad2a1f39f108384ee64585b24c5855a34f59e7
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2379912
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
GKI2.0 doens't allow to export kernel_read and kernel_write api,
so we get the firmware and ini config file via request_firmware() and
write test result via procfs node.
Change-Id: I7fdfa40f454a6fcb9ce69d0e4a9cd1b7caf9a62b
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2375413
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Normal mode:
In case corner area mistake touch when phone is on horizontal screen
state,when phone rotate left or right,FrameWork will send rotation and
corner suppression level, then driver will send switch command to
IC,Firmware will disable corner area touch according to its own logic.
Change-Id: Ib6864cf2a8027beea2066c41e2441359f52d20e4
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2363420
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Fix noise test case fail of factory test,still go on noise testing when
noise data check sum error.
Change-Id: I58fb65cb568758c250f7bcbf5ca7f7339ab2ac4a
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2360618
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Decrease the log of register panel notifier and print the log every
1s when not find matched display panel.
Change-Id: Iab2f4f7accc4bc9de5722e2d0f03255ad6b764e9
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2354041
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1.There is no need to send IC config,this func is a workaround way for old
goodix touch IC to upgrade config again after upgrade touch firmware.
2.Also this func will load config to ram when driver loaded,affecting
touch firmware update.
Change-Id: Icce7a8d57090305231e7f69b2150715578299896
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2352764
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Remove the way that when tap sensor register to notify touch enter
gesture mode.Use node to notify CLI touch enable/disable gesture mode.
Change-Id: Ib732a61289bcfed78b7ffecd3c6c2b27ae590bd1
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2320662
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
When CLI touch wake irq triggerd to wake up kernel,add a wake lock
for it in case kernel suspend before resume.
Change-Id: I47f045f6d53cbe9e491922e60799c2e831e14ce2
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2326776
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1.If touch wait kernel wake up timed out, we must reset IC or just need
to read out data from IC via I2C interface when I2C is ready to let IC
pull up the INT,if we can not wait I2C ready finally, single tap will
not be available at this time sleep state, display on/off once will
restore it.
2.Disable watchdog work to ping IC when IC is on SLEEPING and SLEEP_ON
state.
Change-Id: I10106ef993ddb8270293c3defd4002e6cda6e9b5
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2324444
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Support touch sensitivity in game mode for eqs,default touch report rate
is 240HZ and high report rate is 360HZ.
Change-Id: I5d6f580e05e15bb2cd62ef2500fc1d6559a968d0
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2294916
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Before read touch report data from touch IC when in easy wakeup state,
wait for I2C bus controller to wake or I2C communication will fail.
Change-Id: I8e33fac59b089f46bd71c2361ca7396d1ae8ac5b
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2282270
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Moto driver module compiled using qcom makefile from 8450/8475/8550 and
it does not support KERNEL_CFLAGS,so in these plaform we use
KBUILD_OPTIONS.
Change-Id: I6dbcf28b194201ac19a40e891683acc667893b34
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2281001
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ping Xiao <xiaoping@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Lift off current touch when suspend in case after resume still receive
last touch data.
Change-Id: I2c7e7824d724534af45d88880d08d314e9e9a23c
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2274865
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Support config different touch report rate by product,
search corresponding report rate command in config struct according to
refresh/interpolation config and then send it to IC.
Change-Id: Ieff127e4b1e6dbb18fdda5deca91972326ebbb9c
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2258273
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Ensure get panel supplier name before access module execting probe,so test
limit file can be found correctly.
Change-Id: Ib7af4867dbaefbef45d2662dd321824ebccaea4d
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2237330
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
When on panel off state,enable or disable gesture mode will cause
suspend and resume error,recording touch IC power state to correct.
Change-Id: I71283abc65386b3a448782c1d122bcbb33c584cd
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2236143
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Set regulator avdd load to 50mA,so when touch is active it can notify
the regualtor core to set the most efficient regulator operating mode
(HPM mode)for the new regulator loading.
Change-Id: Ie28564c6f5ff114cd99dd5742da1f88ddf3cbb45
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2210880
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Add CLI touch factory test cp_panel node,from this node we can
read out self-capcitance raw data and to verify whether calibration
data is ok.
Change-Id: I5f52fb464ff8ca583e518bd110fad8a86c6669d1
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2205761
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
CLI parade touch need to do suspend and resume when receiving
suspend and resume notifications from display module.
Change-Id: Ibcb2e10f5974b9e546b9ffd0aa2ead3d106e4a0d
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2200231
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Change calibrate/cm_panel/auto_shorts nodes from debugfs to sysfs
for CLI touch factory test,because debugfs is not used in user build
version and these nodes can not be used.
Change-Id: I129e2137a261e976c8ea81bc5acdd0042423cfd6
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2192076
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
On user-debug build, use an orderly shutdown for factory kill instead
of a kernel power off. The orderly shutdown will attempt to call the
reboot binary from userspace first, and then fallback to kernel power
off if it fails.
Change-Id: Ia3d80b828670a5098afccbca2d934f9d32255a93
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2145390
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Make the vl53l5 Kernel driver compatible for both 32bit and 64bit
applications from userspace, including L5 test program, factory TCMD
and camera app through L5 Sensor HAL.
Change-Id: Ia0ce2db08de83f7ab6ff487660ccd2bd21b48a14
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1831972
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Wenge Zhu