devon: st21nfc bring up (4)

device tree setting for devon nfc.
disable pm8008 dtsi.

Change-Id: I981dbd97e5055c279a4c878c9acc513389e7abd7
Signed-off-by: longc101 <longc101@motorola.com>
Reviewed-on: https://gerrit.mot.com/2213606
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Submit-Approved: Jira Key
Tested-by: Jira Key
Reviewed-by: Zhenghai Pan <panzh2@lenovo.com>
(cherry picked from commit 3a584c1ec41d36ca2ac7474c3357f9f171ce3507)
Reviewed-on: https://gerrit.mot.com/2217608
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
This commit is contained in:
longc101 authored and Carlos Pinho committed 2023-05-31 17:01:05 -03:00
1 parent 8843c66645
commit ab1eb8e884
1 file changed
+82
+82
View File
@@ -32,6 +32,66 @@
nfc {
nfc_enable_active: nfc_enable_active {
/* active state */
mux {
/* 69: Enable */
pins = "gpio69";
function = "gpio";
};
config {
pins = "gpio69";
drive-strength = <2>; /* 2 MA */
bias-pull-up;
};
};
nfc_enable_suspend: nfc_enable_suspend{
/* sleep state */
mux {
/* 69: Enable */
pins = "gpio69";
function = "gpio";
};
config {
pins = "gpio69";
drive-strength = <2>; /* 2 MA */
bias-disable;
};
};
nfc_int_active: nfc_int_active {
/* active state */
mux {
/* GPIO 70 NFC Read Interrupt */
pins = "gpio70";
function = "gpio";
};
config {
pins = "gpio70";
drive-strength = <2>; /* 2 MA */
bias-disable;
};
};
nfc_int_suspend: nfc_int_suspend {
/* sleep state */
mux {
/* GPIO 70 NFC Read Interrupt */
pins = "gpio70";
function = "gpio";
};
config {
pins = "gpio70";
drive-strength = <2>; /* 2 MA */
bias-disable;
};
};
nfc_clk_req_active {
/* active state */
mux {
@@ -70,6 +130,7 @@
status = "okay";
pinctrl-0 = <&qupv3_se1_i2c_act>;
pinctrl-1 = <&qupv3_se1_i2c_sle>;
/*
sec-nfc@27 {
compatible = "sec-nfc";
reg = <0x27>;
@@ -85,6 +146,27 @@
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend &nfc_clk_req_suspend>;
clock-names = "OSC_NFC";
}; */
st21nfc@08 {
compatible = "st,st21nfc";
status = "ok"
reg = <0x08>;
interrupt-parent = <&tlmm>;
interrupts = <70 0>;
st,reset_gpio = <&tlmm 69 0x00>;
st,irq_gpio = <&tlmm 70 0x00>;
st,clkreq_gpio = <&tlmm 71 0x00>;
interrupt-names = "nfc_irq";
pinctrl-names = "nfc_active", "nfc_suspend";
pinctrl-0 = <&nfc_int_active &nfc_enable_active &nfc_clk_req_active>;
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend &nfc_clk_req_suspend>;
};
};
&pm8008_8 {
status = "disabled";
};
&pm8008_9 {
status = "disabled";
};