arm/dts: init device tree for cebu
inherit device tree from guamp update device tree with cebu specific changes Change-Id: I9ea3346129019bf496b7698e65e4ba2a5d6bced6 Reviewed-on: https://gerrit.mot.com/1630555 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key
This commit is contained in:
liujg6 authored and Carlos Pinho committed
1 parent
30bfe3481c
commit
369f1a7b8e
3 files changed
+349
No files matched your search
@@ -38,6 +38,10 @@ dtbo-$(CONFIG_BORNEO_DTB) += \
|
||||
|
||||
bengal-borneo-evb-overlay.dtbo-base := bengal-moto-base-borneo.dtb
|
||||
bengal-borneo-evt-overlay.dtbo-base := bengal-moto-base-borneo.dtb
|
||||
dtbo-$(CONFIG_CEBU_DTB) += \
|
||||
bengal-cebu-evt-overlay.dtbo
|
||||
|
||||
bengal-cebu-evt-overlay.dtbo-base := bengal-moto-base.dtb
|
||||
|
||||
else
|
||||
ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y)
|
||||
|
||||
@@ -0,0 +1,317 @@
|
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include "bengal-moto-common-overlay.dtsi"
|
||||
#include "bengal-guam-display.dtsi"
|
||||
#include "bengal-audio-overlay.dtsi"
|
||||
#include "bengal-guam-touchscreen-overlay.dtsi"
|
||||
#include "camera/bengal-camera-sensor-mot-guamp-overlay.dtsi"
|
||||
#include "bengal-guam-fps.dtsi"
|
||||
#include "bengal-guam-moto-thermal.dtsi"
|
||||
|
||||
&qupv3_se4_2uart {
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
|
||||
&pm6125_gpios {
|
||||
|
||||
key_vol_up {
|
||||
key_vol_up_default: key_vol_up_default {
|
||||
pins = "gpio5";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
power-source = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm{
|
||||
capsense_sar_gpio_pins: capsense_sar_gpio_pins {
|
||||
mux {
|
||||
pins = "gpio36";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio36";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
tlmm_gpio_key {
|
||||
gpio_key_active: gpio_key_active {
|
||||
mux {
|
||||
pins = "gpio33";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio33";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
label = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&key_vol_up_default &gpio_key_active>;
|
||||
|
||||
vol_up {
|
||||
label = "volume_up";
|
||||
gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <1>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
linux,can-disable;
|
||||
debounce-interval = <15>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
assist_key{
|
||||
label = "assist_key";
|
||||
gpios = <&tlmm 33 0x1>;
|
||||
linux,input-type = <1>;
|
||||
linux,code = <KEY_SEARCH>;
|
||||
debounce-interval = <15>;
|
||||
linux,can-disable;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
|
||||
&sdhc_1 {
|
||||
vdd-supply = <&L24A>;
|
||||
qcom,vdd-voltage-level = <2960000 2960000>;
|
||||
qcom,vdd-current-level = <0 570000>;
|
||||
|
||||
vdd-io-supply = <&L11A>;
|
||||
qcom,vdd-io-always-on;
|
||||
qcom,vdd-io-lpm-sup;
|
||||
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
||||
qcom,vdd-io-current-level = <0 325000>;
|
||||
|
||||
pinctrl-names = "active", "sleep";
|
||||
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
|
||||
&sdc1_rclk_on>;
|
||||
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
|
||||
&sdc1_rclk_off>;
|
||||
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
vdd-supply = <&L22A>;
|
||||
qcom,vdd-voltage-level = <2960000 2960000>;
|
||||
qcom,vdd-current-level = <0 800000>;
|
||||
|
||||
vdd-io-supply = <&L5A>;
|
||||
qcom,vdd-io-voltage-level = <1800000 2960000>;
|
||||
qcom,vdd-io-current-level = <0 22000>;
|
||||
|
||||
pinctrl-names = "active", "sleep";
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
|
||||
cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&ufsphy_mem {
|
||||
compatible = "qcom,ufs-phy-qmp-v3-660";
|
||||
|
||||
vdda-phy-supply = <&L4A>; /* 0.9v */
|
||||
vdda-pll-supply = <&L12A>; /* 1.8v */
|
||||
vdda-phy-max-microamp = <51400>;
|
||||
vdda-pll-max-microamp = <14200>;
|
||||
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&ufshc_mem {
|
||||
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
|
||||
vdd-hba-fixed-regulator;
|
||||
vcc-supply = <&L24A>;
|
||||
vcc-voltage-level = <2950000 2960000>;
|
||||
vccq2-supply = <&L11A>;
|
||||
vcc-max-microamp = <600000>;
|
||||
vccq2-max-microamp = <600000>;
|
||||
|
||||
qcom,vddp-ref-clk-supply = <&L18A>;
|
||||
qcom,vddp-ref-clk-max-microamp = <100>;
|
||||
qcom,vddp-ref-clk-min-uV = <1232000>;
|
||||
qcom,vddp-ref-clk-max-uV = <1232000>;
|
||||
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&sde_dsi {
|
||||
qcom,dsi-default-panel = <&dsi_hlt_hx83102d_video>;
|
||||
};
|
||||
|
||||
&soc {
|
||||
qcom,tz_gpio {
|
||||
compatible = "qcom,tz_gpio";
|
||||
tlmm-tz = <14>,
|
||||
<15>,
|
||||
<16>,
|
||||
<17>;
|
||||
};
|
||||
};
|
||||
|
||||
&L21A {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
qcom,init-voltage = <2800000>;
|
||||
};
|
||||
|
||||
&qupv3_se0_i2c {
|
||||
status = "ok"
|
||||
sar_abov: abov_sar@20 {
|
||||
status = "ok"
|
||||
compatible = "abov,abov_sar_mmi_overlay";
|
||||
reg = <0x20>;
|
||||
cap_vdd-supply = <&L21A>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <36 0x2>;
|
||||
gpios = <&tlmm 36 0x2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&capsense_sar_gpio_pins>;
|
||||
reg_array_len = <0x03>;
|
||||
reg_array_val = <0x07 0x00 0x08 0x1B 0xFB 0x01>;
|
||||
cap,use_channel_ch1 = <0x00>;
|
||||
cap,use_channel_ch0 = <0x01>;
|
||||
ch0_name = "capsense_top";
|
||||
ch1_name = "capsense_bottom";
|
||||
label = "AbovCapSense";
|
||||
cap,channel_number = <0x02>;
|
||||
cap,fw_mode_ret = <0x3A>;
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_se1_i2c {
|
||||
status = "ok"
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
nq@28 {
|
||||
compatible = "qcom,nq-nci";
|
||||
reg = <0x28>;
|
||||
qcom,nq-irq = <&tlmm 70 0x00>;
|
||||
qcom,nq-ven = <&tlmm 69 0x00>;
|
||||
qcom,nq-firm = <&tlmm 31 0x00>;
|
||||
qcom,nq-clkreq = <&tlmm 86 0x00>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <70 0>;
|
||||
interrupt-names = "nfc_irq";
|
||||
pinctrl-names = "nfc_active", "nfc_suspend";
|
||||
pinctrl-0 = <&nfc_int_active &nfc_enable_active
|
||||
&nfc_clk_req_active>;
|
||||
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
|
||||
&nfc_clk_req_suspend>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc{
|
||||
mtp_batterydata: qcom,battery-data {
|
||||
qcom,batt-id-range-pct = <15>;
|
||||
df-serialnum = "SB18C77591";
|
||||
#include "qg-batterydata-jk50-atl-4850mah.dtsi"
|
||||
#include "qg-batterydata-jk50-scud-4850mah.dtsi"
|
||||
#include "qg-batterydata-jk50-atl-flex-4850mah.dtsi"
|
||||
#include "qg-batterydata-jk50-atl-unicoba-4850mah.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&pmi632_qg {
|
||||
qcom,qg-iterm-ma = <400>;
|
||||
qcom,vbatt-cutoff-mv = <3200>;
|
||||
qcom,vbatt-empty-mv = <3000>;
|
||||
qcom,vbatt-low-mv = <3300>;
|
||||
qcom,vbatt-low-cold-mv = <3500>;
|
||||
qcom,battery-data = <&mtp_batterydata>;
|
||||
qcom,rbat-conn-mohm = <10>;
|
||||
qcom,cl-feedback-on;
|
||||
qcom,cl-min-start-soc = <0>;
|
||||
qcom,cl-max-start-soc = <5>;
|
||||
qcom,cl-min-temp = <150>;
|
||||
qcom,cl-max-temp = <450>;
|
||||
qcom,cl-max-increment = <5>;
|
||||
qcom,cl-max-decrement = <10>;
|
||||
qcom,cl-min-limit = <200>;
|
||||
qcom,cl-max-limit = <30>;
|
||||
qcom,s3-entry-ibat-ua = <15000>;
|
||||
qcom,s3-exit-ibat-ua = <35000>;
|
||||
qcom,vbatt-empty-cold-mv = <3000>;
|
||||
qcom,ignore-shutdown-soc-secs = <1800>;
|
||||
qcom.hold-soc-while-full;
|
||||
qcom,linearize-soc;
|
||||
};
|
||||
|
||||
&pmi632_charger {
|
||||
qcom,iterm-ma = <200>;
|
||||
qcom,fcc-max-ua = <3000000>;
|
||||
qcom,fv-max-uv = <4400000>;
|
||||
qcom,usb-icl-ua = <3000000>;
|
||||
qcom,thermal-mitigation = <3000>,
|
||||
<2600>,
|
||||
<2300>,
|
||||
<1800>,
|
||||
<1500>,
|
||||
<1000>,
|
||||
<600>,
|
||||
<400>;
|
||||
qcom,battery-data = <&mtp_batterydata>;
|
||||
qcom,mmi-temp-zones = <0 4200 1000 0>,
|
||||
<10 4200 1000 1000>,
|
||||
<15 0 1000 1000>,
|
||||
<45 0 3000 3000>,
|
||||
<60 4200 2000 0>;
|
||||
qcom,enable-charging-limit;
|
||||
qcom,upper-limit-capacity = <70>;
|
||||
qcom,lower-limit-capacity = <60>;
|
||||
qcom,otg-cl-ua = <1000000>;
|
||||
qcom,dc-unsupported;
|
||||
qcom,wireless-unsupported;
|
||||
qcom,usbeb-unsupported;
|
||||
qcom,disable-suspend-on-collapse;
|
||||
dpdm-supply = <&qusb_phy0>;
|
||||
qcom,auto-recharge-soc = <99>;
|
||||
};
|
||||
|
||||
&pmi632_rgb {
|
||||
red {
|
||||
label = "charging";
|
||||
};
|
||||
};
|
||||
&spmi_bus {
|
||||
qcom,pm6125@0 {
|
||||
qpnp-power-on-mmi@800 {
|
||||
compatible = "qcom,qpnp-power-on-mmi";
|
||||
interrupts = <0x0 0x8 0x3 IRQ_TYPE_EDGE_BOTH>;
|
||||
interrupt-names = "kpdpwr-bark";
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,28 @@
|
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "bengal-cebu-common-overlay.dtsi"
|
||||
#include "bengal-guam-audio-overlay.dtsi"
|
||||
|
||||
/ {
|
||||
model = "cebu";
|
||||
compatible = "qcom,bengal-cebu", "qcom,bengal-moto", "qcom,bengal";
|
||||
qcom,msm-id = <444 0x10000>;
|
||||
qcom,board-id = <0 0xA000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Guam HW rev specific changes go here
|
||||
*/
|
||||
Reference in new issue
Block a user