Merge 4.19.262 into android-4.19-stable

Changes in 4.19.262 Makefile.extrawarn: Move -Wcast-function-type-strict to W=1 docs: update mediator information in CoC docs ARM: fix function graph tracer and unwinder dependencies fs: fix UAF/GPF bug in nilfs_mdt_destroy firmware: arm_scmi: Add SCMI PM driver remove routine dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer scsi: qedf: Fix a UAF bug in __qedf_probe() net/ieee802154: fix uninit value bug in dgram_sendmsg um: Cleanup syscall_handler_t cast in syscalls_32.h um: Cleanup compiler warning in arch/x86/um/tls_32.c usb: mon: make mmapped memory read only USB: serial: ftdi_sio: fix 300 bps rate for SIO mmc: core: Replace with already defined values for readability mmc: core: Terminate infinite loop in SD-UHS voltage switch rpmsg: qcom: glink: replace strncpy() with strscpy_pad() nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level() nilfs2: fix leak of nilfs_root in case of writer thread creation failure nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure ceph: don't truncate file in atomic_open random: clamp credited irq bits to maximum mixed ALSA: hda: Fix position reporting on Poulsbo scsi: stex: Properly zero out the passthrough command structure USB: serial: qcserial: add new usb-id for Dell branded EM7455 random: restore O_NONBLOCK support random: avoid reading two cache lines on irq randomness random: use expired timer rather than wq for mixing fast pool wifi: mac80211_hwsim: avoid mac80211 warning on bad rate Input: xpad - add supported devices as contributed on github Input: xpad - fix wireless 360 controller breaking after suspend ALSA: oss: Fix potential deadlock at unregistration ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free() ALSA: usb-audio: Fix potential memory leaks ALSA: usb-audio: Fix NULL dererence at error path ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530 mtd: rawnand: atmel: Unmap streaming DMA mappings iio: dac: ad5593r: Fix i2c read protocol requirements usb: add quirks for Lenovo OneLink+ Dock can: kvaser_usb: Fix use of uninitialized completion can: kvaser_usb_leaf: Fix overread with an invalid command can: kvaser_usb_leaf: Fix TX queue out of sync after restart can: kvaser_usb_leaf: Fix CAN state after restart fs: dlm: fix race between test_bit() and queue_work() fs: dlm: handle -EBUSY first in lock arg validation HID: multitouch: Add memory barriers quota: Check next/prev free block number after reading from quota file regulator: qcom_rpm: Fix circular deferral regression Revert "fs: check FMODE_LSEEK to control internal pipe splicing" parisc: fbdev/stifb: Align graphics memory size to 4MB riscv: Allow PROT_WRITE-only mmap() UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge fbdev: smscufx: Fix use-after-free in ufx_ops_open() btrfs: fix race between quota enable and quota rescan ioctl riscv: fix build with binutils 2.38 nilfs2: fix use-after-free bug of struct nilfs_root ext4: avoid crash when inline data creation follows DIO write ext4: fix null-ptr-deref in ext4_write_info ext4: make ext4_lazyinit_thread freezable ext4: place buffer head allocation before handle start livepatch: fix race between fork and KLP transition ftrace: Properly unset FTRACE_HASH_FL_MOD ring-buffer: Allow splice to read previous partially read pages ring-buffer: Check pending waiters when doing wake ups as well ring-buffer: Fix race between reset page and reading page KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility KVM: nVMX: Unconditionally purge queued/injected events on nested "exit" selinux: use "grep -E" instead of "egrep" sh: machvec: Use char[] for section boundaries wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state() wifi: mac80211: allow bw change during channel switch in mesh bpftool: Fix a wrong type cast in btf_dumper_int spi: mt7621: Fix an error message in mt7621_spi_probe() wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse() spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume() spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime() wifi: rtl8xxxu: Fix skb misuse in TX queue selection bpf: btf: fix truncated last_member_type_id in btf_struct_resolve wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration net: fs_enet: Fix wrong check in do_pd_setup bpf: Ensure correct locking around vulnerable function find_vpid() spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe netfilter: nft_fib: Fix for rpath check with VRF devices spi: s3c64xx: Fix large transfers with DMA vhost/vsock: Use kvmalloc/kvfree for larger packets. mISDN: fix use-after-free bugs in l1oip timer handlers sctp: handle the error returned from sctp_auth_asoc_init_active_key tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks() bnx2x: fix potential memory leak in bnx2x_tpa_stop() once: add DO_ONCE_SLOW() for sleepable contexts net: mvpp2: fix mvpp2 debugfs leak drm: bridge: adv7511: fix CEC power down control register offset drm/mipi-dsi: Detach devices when removing the host platform/chrome: fix double-free in chromeos_laptop_prepare() platform/x86: msi-laptop: Fix old-ec check for backlight registering platform/x86: msi-laptop: Fix resource cleanup drm/bridge: megachips: Fix a null pointer dereference bug mmc: au1xmmc: Fix an error handling path in au1xmmc_probe() ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idx ALSA: dmaengine: increment buffer pointer atomically mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe() ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe memory: of: Fix refcount leak bug in of_get_ddr_timings() soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() soc: qcom: smem_state: Add refcounting for the 'state->of_node' ARM: dts: turris-omnia: Fix mpp26 pin name and comment ARM: dts: kirkwood: lsxl: fix serial line ARM: dts: kirkwood: lsxl: remove first ethernet port ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family ARM: Drop CMDLINE_* dependency on ATAGS ARM: dts: exynos: fix polarity of VBUS GPIO of Origen iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX iio: adc: at91-sama5d2_adc: check return status for pressure and touch iio: inkern: only release the device node when done with it iio: ABI: Fix wrong format of differential capacitance channel ABI. clk: oxnas: Hold reference returned by of_get_parent() clk: berlin: Add of_node_put() for of_get_parent() clk: tegra: Fix refcount leak in tegra210_clock_init clk: tegra: Fix refcount leak in tegra114_clock_init clk: tegra20: Fix refcount leak in tegra20_clock_init HSI: omap_ssi: Fix refcount leak in ssi_probe HSI: omap_ssi_port: Fix dma_map_sg error check media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop tty: xilinx_uartps: Fix the ignore_status media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init RDMA/rxe: Fix "kernel NULL pointer dereference" error RDMA/rxe: Fix the error caused by qp->sk dyndbg: fix module.dyndbg handling dyndbg: let query-modname override actual module name mtd: devices: docg3: check the return value of devm_ioremap() in the probe ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting() ata: fix ata_id_has_devslp() ata: fix ata_id_has_ncq_autosense() ata: fix ata_id_has_dipm() md/raid5: Ensure stripe_fill happens on non-read IO with journal xhci: Don't show warning for reinit on known broken suspend usb: gadget: function: fix dangling pnp_string in f_printer.c drivers: serial: jsm: fix some leaks in probe phy: qualcomm: call clk_disable_unprepare in the error handling staging: vt6655: fix some erroneous memory clean-up loops firmware: google: Test spinlock on panic path to avoid lockups serial: 8250: Fix restoring termios speed after suspend fsi: core: Check error number after calling ida_simple_get mfd: intel_soc_pmic: Fix an error handling path in intel_soc_pmic_i2c_probe() mfd: fsl-imx25: Fix an error handling path in mx25_tsadc_setup_irq() mfd: lp8788: Fix an error handling path in lp8788_probe() mfd: lp8788: Fix an error handling path in lp8788_irq_init() and lp8788_irq_init() mfd: sm501: Add check for platform_driver_register() dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup() spmi: pmic-arb: correct duplicate APID to PPID mapping logic clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe mailbox: bcm-ferxrm-mailbox: Fix error check for dma_map_sg powerpc/math_emu/efp: Include module.h powerpc/sysdev/fsl_msi: Add missing of_node_put() powerpc/pci_dn: Add missing of_node_put() powerpc/powernv: add missing of_node_put() in opal_export_attrs() x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition powerpc/64s: Fix GENERIC_CPU build flags for PPC970 / G5 powerpc: Fix SPE Power ISA properties for e500v1 platforms iommu/omap: Fix buffer overflow in debugfs iommu/iova: Fix module config properly crypto: cavium - prevent integer overflow loading firmware f2fs: fix race condition on setting FI_NO_EXTENT flag ACPI: video: Add Toshiba Satellite/Portege Z830 quirk MIPS: BCM47XX: Cast memcmp() of function to (void *) powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash NFSD: Return nfserr_serverfault if splice_ok but buf->pages have data wifi: brcmfmac: fix invalid address access when enabling SCAN log level openvswitch: Fix double reporting of drops in dropwatch openvswitch: Fix overreporting of drops in dropwatch tcp: annotate data-race around tcp_md5sig_pool_populated wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg() xfrm: Update ipcomp_scratches with NULL when freed wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit() Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create() Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times can: bcm: check the result of can_send() in bcm_can_tx() wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620 wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620 wifi: rt2x00: set SoC wmac clock register wifi: rt2x00: correctly set BBP register 86 for MT7620 net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory Bluetooth: L2CAP: Fix user-after-free r8152: Rate limit overflow messages drm: Use size_t type for len variable in drm_copy_field() drm: Prevent drm_copy_field() to attempt copying a NULL pointer drm/amd/display: fix overflow on MIN_I64 definition drm/vc4: vec: Fix timings for VEC modes drm: panel-orientation-quirks: Add quirk for Anbernic Win600 platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading drm/amdgpu: fix initial connector audio value ARM: dts: imx7d-sdb: config the max pressure for tsc2046 ARM: dts: imx6q: add missing properties for sram ARM: dts: imx6dl: add missing properties for sram ARM: dts: imx6qp: add missing properties for sram ARM: dts: imx6sl: add missing properties for sram ARM: dts: imx6sll: add missing properties for sram ARM: dts: imx6sx: add missing properties for sram media: cx88: Fix a null-ptr-deref bug in buffer_prepare() scsi: 3w-9xxx: Avoid disabling device if failing to enable it nbd: Fix hung when signal interrupts nbd_start_device_ioctl() power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type() staging: vt6655: fix potential memory leak ata: libahci_platform: Sanity check the DT child nodes number HID: roccat: Fix use-after-free in roccat_read() md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info() usb: musb: Fix musb_gadget.c rxstate overflow bug Revert "usb: storage: Add quirk for Samsung Fit flash" nvme: copy firmware_rev on each init usb: idmouse: fix an uninit-value in idmouse_open clk: bcm2835: Make peripheral PLLC critical perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc net: ieee802154: return -EINVAL for unknown addr type net/ieee802154: don't warn zero-sized raw_sendmsg() ext4: continue to expand file system when the target size doesn't reach md: Replace snprintf with scnprintf efi: libstub: drop pointless get_memory_map() call inet: fully convert sk->sk_rx_dst to RCU rules thermal: intel_powerclamp: Use first online CPU as control_cpu gcov: support GCC 12.1 and newer compilers Linux 4.19.262 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: If70223b939e3710c4fbc4f7cc522f07d4b4ffd45
2022-10-30 16:23:17 +01:00
commit 27e286f3db
@@ -135,7 +135,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.

-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5

-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>.
+reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>.

 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 261
+SUBLEVEL = 262
 EXTRAVERSION =
 NAME = "People's Front"

@@ -68,7 +68,7 @@ config ARM
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
 	select HAVE_EXIT_THREAD
 	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
-	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
+	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL && !CC_IS_CLANG)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) && (CC_IS_GCC || CLANG_VERSION >= 100000)
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_GCC_PLUGINS
@@ -1943,7 +1943,6 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS

 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -307,7 +307,7 @@
 		marvell,function = "spi0";
 	};

-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -342,7 +342,7 @@
 		};
 	};

-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };

 &uart0 {
@@ -525,7 +525,7 @@
 		clocks = <&camera 1>;
 		clock-names = "extclk";
 		samsung,camclk-out = <1>;
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;

 		port {
 			is_s5k6a3_ep: endpoint {
@@ -87,7 +87,7 @@
 };

 &ehci {
-	samsung,vbus-gpio = <&gpx3 5 1>;
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";

 	port@1 {
@@ -81,6 +81,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};

@@ -158,6 +158,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};

@@ -9,12 +9,18 @@
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};

 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};

@@ -118,6 +118,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};

@@ -131,6 +131,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};

 		L2: l2-cache@a02000 {
@@ -167,12 +167,18 @@
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};

 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};

@@ -163,12 +163,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
 		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
+		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
 };
@@ -10,6 +10,11 @@

 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -213,22 +218,11 @@
 &mdio {
 	status = "okay";

-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };

-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {
@@ -80,7 +80,7 @@
 	clocks = <&ref12>;
 };

-&sdhci {
+&mmc {
 	status = "okay";
 };

@@ -93,8 +93,8 @@
 			clock-names = "PCLK";
 		};

-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
@@ -85,7 +85,7 @@ static __init void prom_init_mem(void)
 			pr_debug("Assume 128MB RAM\n");
 			break;
 		}
-		if (!memcmp(prom_init, prom_init + mem, 32))
+		if (!memcmp((void *)prom_init, (void *)prom_init + mem, 32))
 			break;
 	}
 	lowmem = mem;
@@ -162,7 +162,7 @@ void __init bcm47xx_prom_highmem_init(void)

 	off = EXTVBASE + __pa(off);
 	for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) {
-		if (!memcmp(prom_init, (void *)(off + extmem), 16))
+		if (!memcmp((void *)prom_init, (void *)(off + extmem), 16))
 			break;
 	}
 	extmem -= lowmem;
@@ -165,7 +165,7 @@ CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=power8
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power9,-mtune=power8)
 else
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,$(call cc-option,-mtune=power5))
-CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mcpu=power5,-mcpu=power4)
+CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=power4
 endif
 else ifdef CONFIG_PPC_BOOK3E_64
 CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
@@ -0,0 +1,51 @@
+/*
+ * e500v1 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.03";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-mmc;		// Memory Coherence
+		power-isa-sp;		// Signal Processing Engine
+		power-isa-sp.fs;	// SPE.Embedded Float Scalar Single
+		power-isa-sp.fv;	// SPE.Embedded Float Vector
+		mmu-type = "power-embedded";
+	};
+};
@@ -11,7 +11,7 @@

 /dts-v1/;

-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"

 / {
 	model = "MPC8540ADS";
@@ -11,7 +11,7 @@

 /dts-v1/;

-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"

 / {
 	model = "MPC8541CDS";
@@ -11,7 +11,7 @@

 /dts-v1/;

-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"

 / {
 	model = "MPC8555CDS";
@@ -11,7 +11,7 @@

 /dts-v1/;

-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"

 / {
 	model = "MPC8560ADS";
@@ -338,6 +338,7 @@ struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
 	INIT_LIST_HEAD(&pdn->list);
 	parent = of_get_parent(dn);
 	pdn->parent = parent ? PCI_DN(parent) : NULL;
+	of_node_put(parent);
 	if (pdn->parent)
 		list_add_tail(&pdn->list, &pdn->parent->child_list);

@@ -21,6 +21,7 @@

 #include <linux/types.h>
 #include <linux/prctl.h>
+#include <linux/module.h>

 #include <linux/uaccess.h>
 #include <asm/reg.h>
@@ -740,6 +740,7 @@ static void opal_export_attrs(void)
 	kobj = kobject_create_and_add("exports", opal_kobj);
 	if (!kobj) {
 		pr_warn("kobject_create_and_add() of exports failed\n");
+		of_node_put(np);
 		return;
 	}

@@ -216,8 +216,10 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 			dev_err(&pdev->dev,
 				"node %pOF has an invalid fsl,msi phandle %u\n",
 				hose->dn, np->phandle);
+			of_node_put(np);
 			return -EINVAL;
 		}
+		of_node_put(np);
 	}

 	for_each_pci_msi_entry(entry, pdev) {
@@ -49,9 +49,16 @@ ifeq ($(CONFIG_RISCV_ISA_C),y)
 	KBUILD_ARCH_C = c
 endif

-KBUILD_AFLAGS += -march=$(KBUILD_MARCH)$(KBUILD_ARCH_A)fd$(KBUILD_ARCH_C)
+# Newer binutils versions default to ISA spec version 20191213 which moves some
+# instructions from the I extension to the Zicsr and Zifencei extensions.
+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei)
+ifeq ($(toolchain-need-zicsr-zifencei),y)
+	KBUILD_ARCH_ZISCR_ZIFENCEI = _zicsr_zifencei
+endif

-KBUILD_CFLAGS += -march=$(KBUILD_MARCH)$(KBUILD_ARCH_A)$(KBUILD_ARCH_C)
+KBUILD_AFLAGS += -march=$(KBUILD_MARCH)$(KBUILD_ARCH_A)fd$(KBUILD_ARCH_C)$(KBUILD_ARCH_ZISCR_ZIFENCEI)
+
+KBUILD_CFLAGS += -march=$(KBUILD_MARCH)$(KBUILD_ARCH_A)$(KBUILD_ARCH_C)$(KBUILD_ARCH_ZISCR_ZIFENCEI)
 KBUILD_CFLAGS += -mno-save-restore
 KBUILD_CFLAGS += -DCONFIG_PAGE_OFFSET=$(CONFIG_PAGE_OFFSET)

@@ -26,9 +26,6 @@ static long riscv_sys_mmap(unsigned long addr, unsigned long len,
 	if (unlikely(offset & (~PAGE_MASK >> page_shift_offset)))
 		return -EINVAL;

-	if (unlikely((prot & PROT_WRITE) && !(prot & PROT_READ)))
-		return -EINVAL;
-
 	return ksys_mmap_pgoff(addr, len, prot, flags, fd,
 			       offset >> (PAGE_SHIFT - page_shift_offset));
 }
@@ -4,7 +4,7 @@

 #include <asm-generic/sections.h>

-extern long __machvec_start, __machvec_end;
+extern char __machvec_start[], __machvec_end[];
 extern char __uncached_start, __uncached_end;
 extern char __start_eh_frame[], __stop_eh_frame[];

@@ -22,8 +22,8 @@
 #define MV_NAME_SIZE 32

 #define for_each_mv(mv) \
-	for ((mv) = (struct sh_machine_vector *)&__machvec_start; \
-	     (mv) && (unsigned long)(mv) < (unsigned long)&__machvec_end; \
+	for ((mv) = (struct sh_machine_vector *)__machvec_start; \
+	     (mv) && (unsigned long)(mv) < (unsigned long)__machvec_end; \
 	     (mv)++)

 static struct sh_machine_vector * __init get_mv_byname(const char *name)
@@ -89,8 +89,8 @@ void __init sh_mv_setup(void)
 	if (!machvec_selected) {
 		unsigned long machvec_size;

-		machvec_size = ((unsigned long)&__machvec_end -
-				(unsigned long)&__machvec_start);
+		machvec_size = ((unsigned long)__machvec_end -
+				(unsigned long)__machvec_start);

 		/*
 		 * Sanity check for machvec section alignment. Ensure
@@ -104,7 +104,7 @@ void __init sh_mv_setup(void)
 		 * vector (usually the only one) from .machvec.init.
 		 */
 		if (machvec_size >= sizeof(struct sh_machine_vector))
-			sh_mv = *(struct sh_machine_vector *)&__machvec_start;
+			sh_mv = *(struct sh_machine_vector *)__machvec_start;
 	}

 	printk(KERN_NOTICE "Booting machvec: %s\n", get_system_type());
@@ -77,7 +77,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)

 static void *c_start(struct seq_file *m, loff_t *pos)
 {
-	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+	return *pos < nr_cpu_ids ? cpu_data + *pos : NULL;
 }

 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
@@ -682,7 +682,7 @@ struct hv_enlightened_vmcs {
 	u64 guest_rip;

 	u32 hv_clean_fields;
-	u32 hv_padding_32;
+	u32 padding32_1;
 	u32 hv_synthetic_controls;
 	struct {
 		u32 nested_flush_hypercall:1;
@@ -690,7 +690,7 @@ struct hv_enlightened_vmcs {
 		u32 reserved:30;
 	} hv_enlightenments_control;
 	u32 hv_vp_id;
-
+	u32 padding32_2;
 	u64 hv_vm_id;
 	u64 partition_assist_page;
 	u64 padding64_4[4];
@@ -1975,7 +1975,7 @@ static int em_pop_sreg(struct x86_emulate_ctxt *ctxt)
 	if (rc != X86EMUL_CONTINUE)
 		return rc;

-	if (ctxt->modrm_reg == VCPU_SREG_SS)
+	if (seg == VCPU_SREG_SS)
 		ctxt->interruptibility = KVM_X86_SHADOW_INT_MOV_SS;
 	if (ctxt->op_bytes > 2)
 		rsp_increment(ctxt, ctxt->op_bytes - 2);
@@ -13276,14 +13276,6 @@ static void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 		 */
 		vmcs12_save_pending_event(vcpu, vmcs12);
 	}
-
-	/*
-	 * Drop what we picked up for L2 via vmx_complete_interrupts. It is
-	 * preserved above and would only end up incorrectly in L1.
-	 */
-	vcpu->arch.nmi_injected = false;
-	kvm_clear_exception_queue(vcpu);
-	kvm_clear_interrupt_queue(vcpu);
 }

 /*
@@ -13617,6 +13609,17 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
 			nested_vmx_abort(vcpu, VMX_ABORT_SAVE_GUEST_MSR_FAIL);
 	}

+	/*
+	 * Drop events/exceptions that were queued for re-injection to L2
+	 * (picked up via vmx_complete_interrupts()), as well as exceptions
+	 * that were pending for L2.  Note, this must NOT be hoisted above
+	 * prepare_vmcs12(), events/exceptions queued for re-injection need to
+	 * be captured in vmcs12 (see vmcs12_save_pending_event()).
+	 */
+	vcpu->arch.nmi_injected = false;
+	kvm_clear_exception_queue(vcpu);
+	kvm_clear_interrupt_queue(vcpu);
+
 	vmx_switch_vmcs(vcpu, &vmx->vmcs01);
 	vm_entry_controls_reset_shadow(vmx);
 	vm_exit_controls_reset_shadow(vmx);
@@ -6,10 +6,9 @@
 #include <asm/unistd.h>
 #include <sysdep/ptrace.h>

-typedef long syscall_handler_t(struct pt_regs);
+typedef long syscall_handler_t(struct syscall_args);

 extern syscall_handler_t *sys_call_table[];

 #define EXECUTE_SYSCALL(syscall, regs) \
-	((long (*)(struct syscall_args)) \
-	 (*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
+	((*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
@@ -65,9 +65,6 @@ static int get_free_idx(struct task_struct* task)
 	struct thread_struct *t = &task->thread;
 	int idx;

-	if (!t->arch.tls_array)
-		return GDT_ENTRY_TLS_MIN;
-
 	for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
 		if (!t->arch.tls_array[idx].present)
 			return idx + GDT_ENTRY_TLS_MIN;
@@ -242,9 +239,6 @@ static int get_tls_entry(struct task_struct *task, struct user_desc *info,
 {
 	struct thread_struct *t = &task->thread;

-	if (!t->arch.tls_array)
-		goto clear;
-
 	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
 		return -EINVAL;

@@ -511,6 +511,22 @@ static const struct dmi_system_id video_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE R830"),
 		},
 	},
+	{
+	 .callback = video_disable_backlight_sysfs_if,
+	 .ident = "Toshiba Satellite Z830",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE Z830"),
+		},
+	},
+	{
+	 .callback = video_disable_backlight_sysfs_if,
+	 .ident = "Toshiba Portege Z830",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE Z830"),
+		},
+	},
 	/*
 	 * Some machine's _DOD IDs don't have bit 31(Device ID Scheme) set
 	 * but the IDs actually follow the Device ID Scheme.
@@ -421,14 +421,24 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
 		}
 	}

-	hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
+	/*
+	 * Too many sub-nodes most likely means having something wrong with
+	 * the firmware.
+	 */
+	child_nodes = of_get_child_count(dev->of_node);
+	if (child_nodes > AHCI_MAX_PORTS) {
+		rc = -EINVAL;
+		goto err_out;
+	}

 	/*
 	 * If no sub-node was found, we still need to set nports to
 	 * one in order to be able to use the
 	 * ahci_platform_[en|dis]able_[phys|regulators] functions.
 	 */
-	if (!child_nodes)
+	if (child_nodes)
+		hpriv->nports = child_nodes;
+	else
 		hpriv->nports = 1;

 	hpriv->phys = devm_kcalloc(dev, hpriv->nports, sizeof(*hpriv->phys), GFP_KERNEL);
@@ -1271,10 +1271,12 @@ static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *b
 	mutex_unlock(&nbd->config_lock);
 	ret = wait_event_interruptible(config->recv_wq,
 					 atomic_read(&config->recv_threads) == 0);
-	if (ret)
+	if (ret) {
 		sock_shutdown(nbd);
-	flush_workqueue(nbd->recv_workq);
+		nbd_clear_que(nbd);
+	}

+	flush_workqueue(nbd->recv_workq);
 	mutex_lock(&nbd->config_lock);
 	nbd_bdev_reset(bdev);
 	/* user requested, ignore socket errors */
@@ -893,8 +893,8 @@ static const struct memdev {
 #endif
 	 [5] = { "zero", 0666, &zero_fops, 0 },
 	 [7] = { "full", 0666, &full_fops, 0 },
-	 [8] = { "random", 0666, &random_fops, 0 },
-	 [9] = { "urandom", 0666, &urandom_fops, 0 },
+	 [8] = { "random", 0666, &random_fops, FMODE_NOWAIT },
+	 [9] = { "urandom", 0666, &urandom_fops, FMODE_NOWAIT },
 #ifdef CONFIG_PRINTK
 	[11] = { "kmsg", 0644, &kmsg_fops, 0 },
 #endif
@@ -891,20 +891,23 @@ void __init add_bootloader_randomness(const void *buf, size_t len)
 }

 struct fast_pool {
-	struct work_struct mix;
 	unsigned long pool[4];
 	unsigned long last;
 	unsigned int count;
+	struct timer_list mix;
 };

+static void mix_interrupt_randomness(struct timer_list *work);
+
 static DEFINE_PER_CPU(struct fast_pool, irq_randomness) = {
 #ifdef CONFIG_64BIT
 #define FASTMIX_PERM SIPHASH_PERMUTATION
-	.pool = { SIPHASH_CONST_0, SIPHASH_CONST_1, SIPHASH_CONST_2, SIPHASH_CONST_3 }
+	.pool = { SIPHASH_CONST_0, SIPHASH_CONST_1, SIPHASH_CONST_2, SIPHASH_CONST_3 },
 #else
 #define FASTMIX_PERM HSIPHASH_PERMUTATION
-	.pool = { HSIPHASH_CONST_0, HSIPHASH_CONST_1, HSIPHASH_CONST_2, HSIPHASH_CONST_3 }
+	.pool = { HSIPHASH_CONST_0, HSIPHASH_CONST_1, HSIPHASH_CONST_2, HSIPHASH_CONST_3 },
 #endif
+	.mix = __TIMER_INITIALIZER(mix_interrupt_randomness, 0)
 };

 /*
@@ -946,7 +949,7 @@ int __cold random_online_cpu(unsigned int cpu)
 }
 #endif

-static void mix_interrupt_randomness(struct work_struct *work)
+static void mix_interrupt_randomness(struct timer_list *work)
 {
 	struct fast_pool *fast_pool = container_of(work, struct fast_pool, mix);
 	/*
@@ -977,7 +980,7 @@ static void mix_interrupt_randomness(struct work_struct *work)
 	local_irq_enable();

 	mix_pool_bytes(pool, sizeof(pool));
-	credit_init_bits(max(1u, (count & U16_MAX) / 64));
+	credit_init_bits(clamp_t(unsigned int, (count & U16_MAX) / 64, 1, sizeof(pool) * 8));

 	memzero_explicit(pool, sizeof(pool));
 }
@@ -1000,10 +1003,11 @@ void add_interrupt_randomness(int irq)
 	if (new_count < 1024 && !time_is_before_jiffies(fast_pool->last + HZ))
 		return;

-	if (unlikely(!fast_pool->mix.func))
-		INIT_WORK(&fast_pool->mix, mix_interrupt_randomness);
 	fast_pool->count |= MIX_INFLIGHT;
-	queue_work_on(raw_smp_processor_id(), system_highpri_wq, &fast_pool->mix);
+	if (!timer_pending(&fast_pool->mix)) {
+		fast_pool->mix.expires = jiffies;
+		add_timer_on(&fast_pool->mix, raw_smp_processor_id());
+	}
 }
 EXPORT_SYMBOL_GPL(add_interrupt_randomness);

@@ -1295,6 +1299,11 @@ static ssize_t random_read_iter(struct kiocb *kiocb, struct iov_iter *iter)
 {
 	int ret;

+	if (!crng_ready() &&
+	    ((kiocb->ki_flags & IOCB_NOWAIT) ||
+	     (kiocb->ki_filp->f_flags & O_NONBLOCK)))
+		return -EAGAIN;
+
 	ret = wait_for_random_bytes();
 	if (ret != 0)
 		return ret;
@@ -950,9 +950,9 @@ static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
 	return div;
 }

-static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
-					    unsigned long parent_rate,
-					    u32 div)
+static unsigned long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
+						     unsigned long parent_rate,
+						     u32 div)
 {
 	const struct bcm2835_clock_data *data = clock->data;
 	u64 temp;
@@ -1737,7 +1737,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
 		.load_mask = CM_PLLC_LOADPER,
 		.hold_mask = CM_PLLC_HOLDPER,
 		.fixed_divider = 1,
-		.flags = CLK_SET_RATE_PARENT),
+		.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),

 	/*
 	 * PLLD is the display PLL, used to drive DSI display panels.
@@ -499,12 +499,15 @@ static void __init berlin2_clock_setup(struct device_node *np)
 	int n, ret;

 	clk_data = kzalloc(struct_size(clk_data, hws, MAX_CLKS), GFP_KERNEL);
-	if (!clk_data)
+	if (!clk_data) {
+		of_node_put(parent_np);
 		return;
+	}
 	clk_data->num = MAX_CLKS;
 	hws = clk_data->hws;

 	gbase = of_iomap(parent_np, 0);
+	of_node_put(parent_np);
 	if (!gbase)
 		return;

@@ -285,19 +285,23 @@ static void __init berlin2q_clock_setup(struct device_node *np)
 	int n, ret;

 	clk_data = kzalloc(struct_size(clk_data, hws, MAX_CLKS), GFP_KERNEL);
-	if (!clk_data)
+	if (!clk_data) {
+		of_node_put(parent_np);
 		return;
+	}
 	clk_data->num = MAX_CLKS;
 	hws = clk_data->hws;

 	gbase = of_iomap(parent_np, 0);
 	if (!gbase) {
+		of_node_put(parent_np);
 		pr_err("%pOF: Unable to map global base\n", np);
 		return;
 	}

 	/* BG2Q CPU PLL is not part of global registers */
 	cpupll_base = of_iomap(parent_np, 1);
+	of_node_put(parent_np);
 	if (!cpupll_base) {
 		pr_err("%pOF: Unable to map cpupll base\n", np);
 		iounmap(gbase);
@@ -218,7 +218,7 @@ static const struct of_device_id oxnas_stdclk_dt_ids[] = {

 static int oxnas_stdclk_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device_node *np = pdev->dev.of_node, *parent_np;
 	const struct oxnas_stdclk_data *data;
 	const struct of_device_id *id;
 	struct regmap *regmap;
@@ -230,7 +230,9 @@ static int oxnas_stdclk_probe(struct platform_device *pdev)
 		return -ENODEV;
 	data = id->data;

-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap)) {
 		dev_err(&pdev->dev, "failed to have parent regmap\n");
 		return PTR_ERR(regmap);
@@ -1348,6 +1348,7 @@ static void __init tegra114_clock_init(struct device_node *np)
 	}

 	pmc_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!pmc_base) {
 		pr_err("Can't map pmc registers\n");
 		WARN_ON(1);
@@ -1152,6 +1152,7 @@ static void __init tegra20_clock_init(struct device_node *np)
 	}

 	pmc_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!pmc_base) {
 		pr_err("Can't map pmc registers\n");
 		BUG();
@@ -3529,6 +3529,7 @@ static void __init tegra210_clock_init(struct device_node *np)
 	}

 	pmc_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!pmc_base) {
 		pr_err("Can't map pmc registers\n");
 		WARN_ON(1);
@@ -252,14 +252,16 @@ static int of_dra7_atl_clk_probe(struct platform_device *pdev)
 		if (rc) {
 			pr_err("%s: failed to lookup atl clock %d\n", __func__,
 			       i);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto pm_put;
 		}

 		clk = of_clk_get_from_provider(&clkspec);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to get atl clock %d from provider\n",
 			       __func__, i);
-			return PTR_ERR(clk);
+			ret = PTR_ERR(clk);
+			goto pm_put;
 		}

 		cdesc = to_atl_desc(__clk_get_hw(clk));
@@ -292,8 +294,9 @@ static int of_dra7_atl_clk_probe(struct platform_device *pdev)
 		if (cdesc->enabled)
 			atl_clk_enable(__clk_get_hw(clk));
 	}
-	pm_runtime_put_sync(cinfo->dev);

+pm_put:
+	pm_runtime_put_sync(cinfo->dev);
 	return ret;
 }

@@ -257,6 +257,7 @@ static int cpt_ucode_load_fw(struct cpt_device *cpt, const u8 *fw, bool is_ae)
 	const struct firmware *fw_entry;
 	struct device *dev = &cpt->pdev->dev;
 	struct ucode_header *ucode;
+	unsigned int code_length;
 	struct microcode *mcode;
 	int j, ret = 0;

@@ -267,11 +268,12 @@ static int cpt_ucode_load_fw(struct cpt_device *cpt, const u8 *fw, bool is_ae)
 	ucode = (struct ucode_header *)fw_entry->data;
 	mcode = &cpt->mcode[cpt->next_mc_idx];
 	memcpy(mcode->version, (u8 *)fw_entry->data, CPT_UCODE_VERSION_SZ);
-	mcode->code_size = ntohl(ucode->code_length) * 2;
-	if (!mcode->code_size) {
+	code_length = ntohl(ucode->code_length);
+	if (code_length == 0 || code_length >= INT_MAX / 2) {
 		ret = -EINVAL;
 		goto fw_release;
 	}
+	mcode->code_size = code_length * 2;

 	mcode->is_ae = is_ae;
 	mcode->core_mask = 0ULL;
@@ -653,7 +653,7 @@ static void __cleanup(struct ioatdma_chan *ioat_chan, dma_addr_t phys_complete)
 	if (active - i == 0) {
 		dev_dbg(to_dev(ioat_chan), "%s: cancel completion timeout\n",
 			__func__);
-		mod_timer(&ioat_chan->timer, jiffies + IDLE_TIMEOUT);
+		mod_timer_pending(&ioat_chan->timer, jiffies + IDLE_TIMEOUT);
 	}

 	/* microsecond delay by sysfs variable  per pending descriptor */
@@ -679,7 +679,7 @@ static void ioat_cleanup(struct ioatdma_chan *ioat_chan)

 		if (chanerr &
 		    (IOAT_CHANERR_HANDLE_MASK | IOAT_CHANERR_RECOVER_MASK)) {
-			mod_timer(&ioat_chan->timer, jiffies + IDLE_TIMEOUT);
+			mod_timer_pending(&ioat_chan->timer, jiffies + IDLE_TIMEOUT);
 			ioat_eh(ioat_chan);
 		}
 	}
@@ -876,7 +876,7 @@ static void check_active(struct ioatdma_chan *ioat_chan)
 	}

 	if (test_and_clear_bit(IOAT_CHAN_ACTIVE, &ioat_chan->state))
-		mod_timer(&ioat_chan->timer, jiffies + IDLE_TIMEOUT);
+		mod_timer_pending(&ioat_chan->timer, jiffies + IDLE_TIMEOUT);
 }

 void ioat_timer_event(struct timer_list *t)
@@ -2654,7 +2654,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		if (err < 0) {
 			dev_err(xdev->dev,
 				"missing xlnx,num-fstores property\n");
-			return err;
+			goto disable_clks;
 		}

 		err = of_property_read_u32(node, "xlnx,flush-fsync",
@@ -2674,7 +2674,11 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		xdev->ext_addr = false;

 	/* Set the dma mask bits */
-	dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+	err = dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+	if (err < 0) {
+		dev_err(xdev->dev, "DMA mask error %d\n", err);
+		goto disable_clks;
+	}

 	/* Initialize the DMA engine */
 	xdev->common.dev = &pdev->dev;
@@ -106,9 +106,28 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
 	scmi_pd_data->domains = domains;
 	scmi_pd_data->num_domains = num_domains;

+	dev_set_drvdata(dev, scmi_pd_data);
+
 	return of_genpd_add_provider_onecell(np, scmi_pd_data);
 }

+static void scmi_pm_domain_remove(struct scmi_device *sdev)
+{
+	int i;
+	struct genpd_onecell_data *scmi_pd_data;
+	struct device *dev = &sdev->dev;
+	struct device_node *np = dev->of_node;
+
+	of_genpd_del_provider(np);
+
+	scmi_pd_data = dev_get_drvdata(dev);
+	for (i = 0; i < scmi_pd_data->num_domains; i++) {
+		if (!scmi_pd_data->domains[i])
+			continue;
+		pm_genpd_remove(scmi_pd_data->domains[i]);
+	}
+}
+
 static const struct scmi_device_id scmi_id_table[] = {
 	{ SCMI_PROTOCOL_POWER },
 	{ },
@@ -118,6 +137,7 @@ MODULE_DEVICE_TABLE(scmi, scmi_id_table);
 static struct scmi_driver scmi_power_domain_driver = {
 	.name = "scmi-power-domain",
 	.probe = scmi_pm_domain_probe,
+	.remove = scmi_pm_domain_remove,
 	.id_table = scmi_id_table,
 };
 module_scmi_driver(scmi_power_domain_driver);
@@ -301,14 +301,6 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table,
 		goto fail;
 	}

-	/*
-	 * Now that we have done our final memory allocation (and free)
-	 * we can get the memory map key needed for exit_boot_services().
-	 */
-	status = efi_get_memory_map(sys_table, &map);
-	if (status != EFI_SUCCESS)
-		goto fail_free_new_fdt;
-
 	status = update_fdt(sys_table, (void *)fdt_addr, fdt_size,
 			    (void *)*new_fdt_addr, MAX_FDT_SIZE, cmdline_ptr,
 			    initrd_addr, initrd_size);
@@ -661,6 +661,15 @@ static struct notifier_block gsmi_die_notifier = {
 static int gsmi_panic_callback(struct notifier_block *nb,
 			       unsigned long reason, void *arg)
 {
+
+	/*
+	 * Panic callbacks are executed with all other CPUs stopped,
+	 * so we must not attempt to spin waiting for gsmi_dev.lock
+	 * to be released.
+	 */
+	if (spin_is_locked(&gsmi_dev.lock))
+		return NOTIFY_DONE;
+
 	gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC);
 	return NOTIFY_DONE;
 }
@@ -1279,6 +1279,9 @@ int fsi_master_register(struct fsi_master *master)

 	mutex_init(&master->scan_lock);
 	master->idx = ida_simple_get(&master_ida, 0, INT_MAX, GFP_KERNEL);
+	if (master->idx < 0)
+		return master->idx;
+
 	dev_set_name(&master->dev, "fsi%d", master->idx);

 	rc = device_register(&master->dev);
@@ -1638,10 +1638,12 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 						   adev->mode_info.dither_property,
 						   AMDGPU_FMT_DITHER_DISABLE);

-			if (amdgpu_audio != 0)
+			if (amdgpu_audio != 0) {
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
+			}

 			subpixel_order = SubPixelHorizontalRGB;
 			connector->interlace_allowed = true;
@@ -1746,6 +1748,7 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
 			}
 			drm_object_attach_property(&amdgpu_connector->base.base,
 						   adev->mode_info.dither_property,
@@ -1794,6 +1797,7 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
 			}
 			drm_object_attach_property(&amdgpu_connector->base.base,
 						   adev->mode_info.dither_property,
@@ -1839,6 +1843,7 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
 			}
 			drm_object_attach_property(&amdgpu_connector->base.base,
 						   adev->mode_info.dither_property,
@@ -26,12 +26,12 @@
 #include "bw_fixed.h"


-#define MIN_I64 \
-	(int64_t)(-(1LL << 63))
-
 #define MAX_I64 \
 	(int64_t)((1ULL << 63) - 1)

+#define MIN_I64 \
+	(-MAX_I64 - 1)
+
 #define FRACTIONAL_PART_MASK \
 	((1ULL << BW_FIXED_BITS_PER_FRACTIONAL_PART) - 1)

@@ -383,10 +383,7 @@ void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
 #else
 static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
 {
-	unsigned int offset = adv7511->type == ADV7533 ?
-						ADV7533_REG_CEC_OFFSET : 0;
-
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
 		     ADV7511_CEC_CTRL_POWER_DOWN);
 	return 0;
 }
@@ -316,7 +316,7 @@ int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
 		goto err_cec_alloc;
 	}

-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset, 0);
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL, 0);
 	/* cec soft reset */
 	regmap_write(adv7511->regmap_cec,
 		     ADV7511_REG_CEC_SOFT_RESET + offset, 0x01);
@@ -343,7 +343,7 @@ err_cec_alloc:
 	dev_info(dev, "Initializing CEC failed with error %d, disabling CEC\n",
 		 ret);
 err_cec_parse_dt:
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
 		     ADV7511_CEC_CTRL_POWER_DOWN);
 	return ret == -EPROBE_DEFER ? ret : 0;
 }
@@ -290,7 +290,9 @@ static void ge_b850v3_lvds_remove(void)
 	 * This check is to avoid both the drivers
 	 * removing the bridge in their remove() function
 	 */
-	if (!ge_b850v3_lvds_ptr)
+	if (!ge_b850v3_lvds_ptr ||
+	    !ge_b850v3_lvds_ptr->stdp2690_i2c ||
+		!ge_b850v3_lvds_ptr->stdp4028_i2c)
 		goto out;

 	drm_bridge_remove(&ge_b850v3_lvds_ptr->bridge);
@@ -458,7 +458,13 @@ EXPORT_SYMBOL(drm_invalid_op);
 */
 static int drm_copy_field(char __user *buf, size_t *buf_len, const char *value)
 {
-	int len;
+	size_t len;
+
+	/* don't attempt to copy a NULL pointer */
+	if (WARN_ONCE(!value, "BUG: the value to copy was not set!")) {
+		*buf_len = 0;
+		return 0;
+	}

 	/* don't overflow userbuf */
 	len = strlen(value);
@@ -305,6 +305,7 @@ static int mipi_dsi_remove_device_fn(struct device *dev, void *priv)
 {
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);

+	mipi_dsi_detach(dsi);
 	mipi_dsi_device_unregister(dsi);

 	return 0;
@@ -95,6 +95,12 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "One S1003"),
 		},
 		.driver_data = (void *)&lcd800x1280_rightside_up,
+	}, {	/* Anbernic Win600 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Anbernic"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Win600"),
+		},
+		.driver_data = (void *)&lcd720x1280_rightside_up,
 	}, {	/* Asus T100HA */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
@@ -654,12 +654,10 @@ static void _dpu_kms_hw_destroy(struct dpu_kms *dpu_kms)
 	_dpu_kms_mmu_destroy(dpu_kms);

 	if (dpu_kms->catalog) {
-		for (i = 0; i < dpu_kms->catalog->vbif_count; i++) {
-			u32 vbif_idx = dpu_kms->catalog->vbif[i].id;
-
-			if ((vbif_idx < VBIF_MAX) && dpu_kms->hw_vbif[vbif_idx]) {
-				dpu_hw_vbif_destroy(dpu_kms->hw_vbif[vbif_idx]);
-				dpu_kms->hw_vbif[vbif_idx] = NULL;
+		for (i = 0; i < ARRAY_SIZE(dpu_kms->hw_vbif); i++) {
+			if (dpu_kms->hw_vbif[i]) {
+				dpu_hw_vbif_destroy(dpu_kms->hw_vbif[i]);
+				dpu_kms->hw_vbif[i] = NULL;
 			}
 		}
 	}
@@ -1094,7 +1092,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 	for (i = 0; i < dpu_kms->catalog->vbif_count; i++) {
 		u32 vbif_idx = dpu_kms->catalog->vbif[i].id;

-		dpu_kms->hw_vbif[i] = dpu_hw_vbif_init(vbif_idx,
+		dpu_kms->hw_vbif[vbif_idx] = dpu_hw_vbif_init(vbif_idx,
 				dpu_kms->vbif[vbif_idx], dpu_kms->catalog);
 		if (IS_ERR_OR_NULL(dpu_kms->hw_vbif[vbif_idx])) {
 			rc = PTR_ERR(dpu_kms->hw_vbif[vbif_idx]);
@@ -18,6 +18,14 @@
 #include "dpu_hw_vbif.h"
 #include "dpu_trace.h"

+static struct dpu_hw_vbif *dpu_get_vbif(struct dpu_kms *dpu_kms, enum dpu_vbif vbif_idx)
+{
+	if (vbif_idx < ARRAY_SIZE(dpu_kms->hw_vbif))
+		return dpu_kms->hw_vbif[vbif_idx];
+
+	return NULL;
+}
+
 /**
 * _dpu_vbif_wait_for_xin_halt - wait for the xin to halt
 * @vbif:	Pointer to hardware vbif driver
@@ -155,11 +163,11 @@ exit:
 void dpu_vbif_set_ot_limit(struct dpu_kms *dpu_kms,
 		struct dpu_vbif_set_ot_params *params)
 {
-	struct dpu_hw_vbif *vbif = NULL;
+	struct dpu_hw_vbif *vbif;
 	struct dpu_hw_mdp *mdp;
 	bool forced_on = false;
 	u32 ot_lim;
-	int ret, i;
+	int ret;

 	if (!dpu_kms) {
 		DPU_ERROR("invalid arguments\n");
@@ -167,12 +175,7 @@ void dpu_vbif_set_ot_limit(struct dpu_kms *dpu_kms,
 	}
 	mdp = dpu_kms->hw_mdp;

-	for (i = 0; i < ARRAY_SIZE(dpu_kms->hw_vbif); i++) {
-		if (dpu_kms->hw_vbif[i] &&
-				dpu_kms->hw_vbif[i]->idx == params->vbif_idx)
-			vbif = dpu_kms->hw_vbif[i];
-	}
-
+	vbif = dpu_get_vbif(dpu_kms, params->vbif_idx);
 	if (!vbif || !mdp) {
 		DPU_DEBUG("invalid arguments vbif %d mdp %d\n",
 				vbif != 0, mdp != 0);
@@ -217,7 +220,7 @@ exit:
 void dpu_vbif_set_qos_remap(struct dpu_kms *dpu_kms,
 		struct dpu_vbif_set_qos_params *params)
 {
-	struct dpu_hw_vbif *vbif = NULL;
+	struct dpu_hw_vbif *vbif;
 	struct dpu_hw_mdp *mdp;
 	bool forced_on = false;
 	const struct dpu_vbif_qos_tbl *qos_tbl;
@@ -229,13 +232,7 @@ void dpu_vbif_set_qos_remap(struct dpu_kms *dpu_kms,
 	}
 	mdp = dpu_kms->hw_mdp;

-	for (i = 0; i < ARRAY_SIZE(dpu_kms->hw_vbif); i++) {
-		if (dpu_kms->hw_vbif[i] &&
-				dpu_kms->hw_vbif[i]->idx == params->vbif_idx) {
-			vbif = dpu_kms->hw_vbif[i];
-			break;
-		}
-	}
+	vbif = dpu_get_vbif(dpu_kms, params->vbif_idx);

 	if (!vbif || !vbif->cap) {
 		DPU_ERROR("invalid vbif %d\n", params->vbif_idx);
@@ -291,7 +291,7 @@ static void vc4_vec_ntsc_j_mode_set(struct vc4_vec *vec)
 static const struct drm_display_mode ntsc_mode = {
 	DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
 		 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
-		 480, 480 + 3, 480 + 3 + 3, 480 + 3 + 3 + 16, 0,
+		 480, 480 + 7, 480 + 7 + 6, 525, 0,
 		 DRM_MODE_FLAG_INTERLACE)
 };

@@ -313,7 +313,7 @@ static void vc4_vec_pal_m_mode_set(struct vc4_vec *vec)
 static const struct drm_display_mode pal_mode = {
 	DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
 		 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
-		 576, 576 + 2, 576 + 2 + 3, 576 + 2 + 3 + 20, 0,
+		 576, 576 + 4, 576 + 4 + 6, 625, 0,
 		 DRM_MODE_FLAG_INTERLACE)
 };

@@ -1154,7 +1154,7 @@ static void mt_touch_report(struct hid_device *hid,
 	int contact_count = -1;

 	/* sticky fingers release in progress, abort */
-	if (test_and_set_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
+	if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
 		return;

 	scantime = *app->scantime;
@@ -1235,7 +1235,7 @@ static void mt_touch_report(struct hid_device *hid,
 			del_timer(&td->release_timer);
 	}

-	clear_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags);
+	clear_bit_unlock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags);
 }

 static int mt_touch_input_configured(struct hid_device *hdev,
@@ -1672,11 +1672,11 @@ static void mt_expired_timeout(struct timer_list *t)
 	 * An input report came in just before we release the sticky fingers,
 	 * it will take care of the sticky fingers.
 	 */
-	if (test_and_set_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
+	if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
 		return;
 	if (test_bit(MT_IO_FLAGS_PENDING_SLOTS, &td->mt_io_flags))
 		mt_release_contacts(hdev);
-	clear_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags);
+	clear_bit_unlock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags);
 }

 static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
@@ -260,6 +260,8 @@ int roccat_report_event(int minor, u8 const *data)
 	if (!new_value)
 		return -ENOMEM;

+	mutex_lock(&device->cbuf_lock);
+
 	report = &device->cbuf[device->cbuf_end];

 	/* passing NULL is safe */
@@ -279,6 +281,8 @@ int roccat_report_event(int minor, u8 const *data)
 			reader->cbuf_start = (reader->cbuf_start + 1) % ROCCAT_CBUF_SIZE;
 	}

+	mutex_unlock(&device->cbuf_lock);
+
 	wake_up_interruptible(&device->wait);
 	return 0;
 }
@@ -560,6 +560,7 @@ static int ssi_probe(struct platform_device *pd)
 		if (!childpdev) {
 			err = -ENODEV;
 			dev_err(&pd->dev, "failed to create ssi controller port\n");
+			of_node_put(child);
 			goto out3;
 		}
 	}
@@ -253,10 +253,10 @@ static int ssi_start_dma(struct hsi_msg *msg, int lch)
 	if (msg->ttype == HSI_MSG_READ) {
 		err = dma_map_sg(&ssi->device, msg->sgt.sgl, msg->sgt.nents,
 							DMA_FROM_DEVICE);
-		if (err < 0) {
+		if (!err) {
 			dev_dbg(&ssi->device, "DMA map SG failed !\n");
 			pm_runtime_put_autosuspend(omap_port->pdev);
-			return err;
+			return -EIO;
 		}
 		csdp = SSI_DST_BURST_4x32_BIT | SSI_DST_MEMORY_PORT |
 			SSI_SRC_SINGLE_ACCESS0 | SSI_SRC_PERIPHERAL_PORT |
@@ -270,10 +270,10 @@ static int ssi_start_dma(struct hsi_msg *msg, int lch)
 	} else {
 		err = dma_map_sg(&ssi->device, msg->sgt.sgl, msg->sgt.nents,
 							DMA_TO_DEVICE);
-		if (err < 0) {
+		if (!err) {
 			dev_dbg(&ssi->device, "DMA map SG failed !\n");
 			pm_runtime_put_autosuspend(omap_port->pdev);
-			return err;
+			return -EIO;
 		}
 		csdp = SSI_SRC_BURST_4x32_BIT | SSI_SRC_MEMORY_PORT |
 			SSI_DST_SINGLE_ACCESS0 | SSI_DST_PERIPHERAL_PORT |
@@ -81,7 +81,7 @@
 #define	AT91_SAMA5D2_MR_ANACH		BIT(23)
 /* Tracking Time */
 #define	AT91_SAMA5D2_MR_TRACKTIM(v)	((v) << 24)
-#define	AT91_SAMA5D2_MR_TRACKTIM_MAX	0xff
+#define	AT91_SAMA5D2_MR_TRACKTIM_MAX	0xf
 /* Transfer Time */
 #define	AT91_SAMA5D2_MR_TRANSFER(v)	((v) << 28)
 #define	AT91_SAMA5D2_MR_TRANSFER_MAX	0x3
@@ -1329,8 +1329,10 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 		*val = tmp_val;
 		mutex_unlock(&st->lock);
 		iio_device_release_direct_mode(indio_dev);
+		if (ret > 0)
+			ret = at91_adc_adjust_val_osr(st, val);

-		return at91_adc_adjust_val_osr(st, val);
+		return ret;
 	}
 	if (chan->type == IIO_PRESSURE) {
 		ret = iio_device_claim_direct_mode(indio_dev);
@@ -1343,8 +1345,10 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 		*val = tmp_val;
 		mutex_unlock(&st->lock);
 		iio_device_release_direct_mode(indio_dev);
+		if (ret > 0)
+			ret = at91_adc_adjust_val_osr(st, val);

-		return at91_adc_adjust_val_osr(st, val);
+		return ret;
 	}

 	/* in this case we have a voltage channel */
@@ -15,6 +15,8 @@
 #include <linux/of.h>
 #include <linux/acpi.h>

+#include <asm/unaligned.h>
+
 #define AD5593R_MODE_CONF		(0 << 4)
 #define AD5593R_MODE_DAC_WRITE		(1 << 4)
 #define AD5593R_MODE_ADC_READBACK	(4 << 4)
@@ -22,6 +24,24 @@
 #define AD5593R_MODE_GPIO_READBACK	(6 << 4)
 #define AD5593R_MODE_REG_READBACK	(7 << 4)

+static int ad5593r_read_word(struct i2c_client *i2c, u8 reg, u16 *value)
+{
+	int ret;
+	u8 buf[2];
+
+	ret = i2c_smbus_write_byte(i2c, reg);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_master_recv(i2c, buf, sizeof(buf));
+	if (ret < 0)
+		return ret;
+
+	*value = get_unaligned_be16(buf);
+
+	return 0;
+}
+
 static int ad5593r_write_dac(struct ad5592r_state *st, unsigned chan, u16 value)
 {
 	struct i2c_client *i2c = to_i2c_client(st->dev);
@@ -40,13 +60,7 @@ static int ad5593r_read_adc(struct ad5592r_state *st, unsigned chan, u16 *value)
 	if (val < 0)
 		return (int) val;

-	val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_ADC_READBACK);
-	if (val < 0)
-		return (int) val;
-
-	*value = (u16) val;
-
-	return 0;
+	return ad5593r_read_word(i2c, AD5593R_MODE_ADC_READBACK, value);
 }

 static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value)
@@ -60,25 +74,19 @@ static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value)
 static int ad5593r_reg_read(struct ad5592r_state *st, u8 reg, u16 *value)
 {
 	struct i2c_client *i2c = to_i2c_client(st->dev);
-	s32 val;

-	val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_REG_READBACK | reg);
-	if (val < 0)
-		return (int) val;
-
-	*value = (u16) val;
-
-	return 0;
+	return ad5593r_read_word(i2c, AD5593R_MODE_REG_READBACK | reg, value);
 }

 static int ad5593r_gpio_read(struct ad5592r_state *st, u8 *value)
 {
 	struct i2c_client *i2c = to_i2c_client(st->dev);
-	s32 val;
+	u16 val;
+	int ret;

-	val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_GPIO_READBACK);
-	if (val < 0)
-		return (int) val;
+	ret = ad5593r_read_word(i2c, AD5593R_MODE_GPIO_READBACK, &val);
+	if (ret)
+		return ret;

 	*value = (u8) val;

@@ -139,9 +139,10 @@ static int __of_iio_channel_get(struct iio_channel *channel,

 	idev = bus_find_device(&iio_bus_type, NULL, iiospec.np,
 			       iio_dev_node_match);
-	of_node_put(iiospec.np);
-	if (idev == NULL)
+	if (idev == NULL) {
+		of_node_put(iiospec.np);
 		return -EPROBE_DEFER;
+	}

 	indio_dev = dev_to_iio_dev(idev);
 	channel->indio_dev = indio_dev;
@@ -149,6 +150,7 @@ static int __of_iio_channel_get(struct iio_channel *channel,
 		index = indio_dev->info->of_xlate(indio_dev, &iiospec);
 	else
 		index = __of_iio_simple_xlate(indio_dev, &iiospec);
+	of_node_put(iiospec.np);
 	if (index < 0)
 		goto err_put;
 	channel->channel = &indio_dev->channels[index];
@@ -799,7 +799,9 @@ void rxe_qp_destroy(struct rxe_qp *qp)
 	rxe_cleanup_task(&qp->comp.task);

 	/* flush out any receive wr's or pending requests */
-	__rxe_do_task(&qp->req.task);
+	if (qp->req.task.func)
+		__rxe_do_task(&qp->req.task);
+
 	if (qp->sq.queue) {
 		__rxe_do_task(&qp->comp.task);
 		__rxe_do_task(&qp->req.task);
@@ -839,8 +841,10 @@ static void rxe_qp_do_cleanup(struct work_struct *work)

 	free_rd_atomic_resources(qp);

-	kernel_sock_shutdown(qp->sk, SHUT_RDWR);
-	sock_release(qp->sk);
+	if (qp->sk) {
+		kernel_sock_shutdown(qp->sk, SHUT_RDWR);
+		sock_release(qp->sk);
+	}
 }

 /* called when the last reference to the qp is dropped */
@@ -126,6 +126,8 @@ static const struct xpad_device {
 	u8 xtype;
 } xpad_device[] = {
 	{ 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
+	{ 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 },
+	{ 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 },
 	{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
@@ -256,6 +258,7 @@ static const struct xpad_device {
 	{ 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
 	{ 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+	{ 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
@@ -272,6 +275,7 @@ static const struct xpad_device {
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
 	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
@@ -336,6 +340,7 @@ static const struct xpad_device {
 	{ 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
@@ -345,6 +350,14 @@ static const struct xpad_device {
 	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 },
+	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
+	{ 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1220, "Wooting Two HE", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 },
 	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
@@ -430,6 +443,7 @@ static const signed short xpad_abs_triggers[] = {
 static const struct usb_device_id xpad_table[] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
 	XPAD_XBOX360_VENDOR(0x0079),		/* GPD Win 2 Controller */
+	XPAD_XBOX360_VENDOR(0x03eb),		/* Wooting Keyboards (Legacy) */
 	XPAD_XBOX360_VENDOR(0x044f),		/* Thrustmaster X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft X-Box One controllers */
@@ -440,6 +454,7 @@ static const struct usb_device_id xpad_table[] = {
 	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */
 	XPAD_XBOXONE_VENDOR(0x0738),		/* Mad Catz FightStick TE 2 */
 	XPAD_XBOX360_VENDOR(0x07ff),		/* Mad Catz GamePad */
+	XPAD_XBOX360_VENDOR(0x0c12),		/* Zeroplus X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x0e6f),		/* 0x0e6f X-Box One controllers */
 	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori Controllers */
@@ -460,8 +475,12 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOXONE_VENDOR(0x20d6),		/* PowerA Controllers */
 	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA Controllers */
 	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA Controllers */
+	XPAD_XBOX360_VENDOR(0x2563),		/* OneXPlayer Gamepad */
+	XPAD_XBOX360_VENDOR(0x260d),		/* Dareu H101 */
+	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Pro 2 Wired Controller for Xbox */
 	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke X-Box One pad */
 	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir Controllers */
+	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	{ }
 };
@@ -1978,7 +1997,6 @@ static struct usb_driver xpad_driver = {
 	.disconnect	= xpad_disconnect,
 	.suspend	= xpad_suspend,
 	.resume		= xpad_resume,
-	.reset_resume	= xpad_resume,
 	.id_table	= xpad_table,
 };

@@ -35,12 +35,12 @@ static inline bool is_omap_iommu_detached(struct omap_iommu *obj)
 		ssize_t bytes;						\
 		const char *str = "%20s: %08x\n";			\
 		const int maxcol = 32;					\
-		bytes = snprintf(p, maxcol, str, __stringify(name),	\
+		if (len < maxcol)					\
+			goto out;					\
+		bytes = scnprintf(p, maxcol, str, __stringify(name),	\
 				 iommu_read_reg(obj, MMU_##name));	\
 		p += bytes;						\
 		len -= bytes;						\
-		if (len < maxcol)					\
-			goto out;					\
 	} while (0)

 static ssize_t
@@ -59,6 +59,7 @@ struct l1oip {
 	int			bundle;		/* bundle channels in one frm */
 	int			codec;		/* codec to use for transmis. */
 	int			limit;		/* limit number of bchannels */
+	bool			shutdown;	/* if card is released */

 	/* timer */
 	struct timer_list	keep_tl;
@@ -289,7 +289,7 @@ l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
 	p = frame;

 	/* restart timer */
-	if (time_before(hc->keep_tl.expires, jiffies + 5 * HZ))
+	if (time_before(hc->keep_tl.expires, jiffies + 5 * HZ) && !hc->shutdown)
 		mod_timer(&hc->keep_tl, jiffies + L1OIP_KEEPALIVE * HZ);
 	else
 		hc->keep_tl.expires = jiffies + L1OIP_KEEPALIVE * HZ;
@@ -615,7 +615,9 @@ multiframe:
 		goto multiframe;

 	/* restart timer */
-	if (time_before(hc->timeout_tl.expires, jiffies + 5 * HZ) || !hc->timeout_on) {
+	if ((time_before(hc->timeout_tl.expires, jiffies + 5 * HZ) ||
+	     !hc->timeout_on) &&
+	    !hc->shutdown) {
 		hc->timeout_on = 1;
 		mod_timer(&hc->timeout_tl, jiffies + L1OIP_TIMEOUT * HZ);
 	} else /* only adjust timer */
@@ -1247,11 +1249,10 @@ release_card(struct l1oip *hc)
 {
 	int	ch;

-	if (timer_pending(&hc->keep_tl))
-		del_timer(&hc->keep_tl);
+	hc->shutdown = true;

-	if (timer_pending(&hc->timeout_tl))
-		del_timer(&hc->timeout_tl);
+	del_timer_sync(&hc->keep_tl);
+	del_timer_sync(&hc->timeout_tl);

 	cancel_work_sync(&hc->workq);

@@ -634,15 +634,15 @@ static int flexrm_spu_dma_map(struct device *dev, struct brcm_message *msg)

 	rc = dma_map_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
 			DMA_TO_DEVICE);
-	if (rc < 0)
-		return rc;
+	if (!rc)
+		return -EIO;

 	rc = dma_map_sg(dev, msg->spu.dst, sg_nents(msg->spu.dst),
 			DMA_FROM_DEVICE);
-	if (rc < 0) {
+	if (!rc) {
 		dma_unmap_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
 			     DMA_TO_DEVICE);
-		return rc;
+		return -EIO;
 	}

 	return 0;
@@ -70,8 +70,8 @@ static void dump_zones(struct mddev *mddev)
 		int len = 0;

 		for (k = 0; k < conf->strip_zone[j].nb_dev; k++)
-			len += snprintf(line+len, 200-len, "%s%s", k?"/":"",
-					bdevname(conf->devlist[j*raid_disks
+			len += scnprintf(line+len, 200-len, "%s%s", k?"/":"",
+					 bdevname(conf->devlist[j*raid_disks
 							       + k]->bdev, b));
 		pr_debug("md: zone%d=[%s]\n", j, line);

@@ -44,6 +44,7 @@
 */

 #include <linux/blkdev.h>
+#include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/raid/pq.h>
 #include <linux/async_tx.h>
@@ -3723,7 +3724,7 @@ static void handle_stripe_fill(struct stripe_head *sh,
 		 * back cache (prexor with orig_page, and then xor with
 		 * page) in the read path
 		 */
-		if (s->injournal && s->failed) {
+		if (s->to_read && s->injournal && s->failed) {
 			if (test_bit(STRIPE_R5C_CACHING, &sh->state))
 				r5c_make_stripe_write_out(sh);
 			goto out;
@@ -6329,7 +6330,18 @@ static void raid5d(struct md_thread *thread)
 			spin_unlock_irq(&conf->device_lock);
 			md_check_recovery(mddev);
 			spin_lock_irq(&conf->device_lock);
+
+			/*
+			 * Waiting on MD_SB_CHANGE_PENDING below may deadlock
+			 * seeing md_check_recovery() is needed to clear
+			 * the flag when using mdmon.
+			 */
+			continue;
 		}
+
+		wait_event_lock_irq(mddev->sb_wait,
+			!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags),
+			conf->device_lock);
 	}
 	pr_debug("%d stripes handled\n", handled);

@@ -144,11 +144,10 @@ static int buffer_prepare(struct vb2_buffer *vb)
 		return -EINVAL;
 	vb2_set_plane_payload(vb, 0, size);

-	cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
-			 0, VBI_LINE_LENGTH * lines,
-			 VBI_LINE_LENGTH, 0,
-			 lines);
-	return 0;
+	return cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
+				0, VBI_LINE_LENGTH * lines,
+				VBI_LINE_LENGTH, 0,
+				lines);
 }

 static void buffer_finish(struct vb2_buffer *vb)
@@ -452,6 +452,7 @@ static int queue_setup(struct vb2_queue *q,

 static int buffer_prepare(struct vb2_buffer *vb)
 {
+	int ret;
 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
 	struct cx88_core *core = dev->core;
@@ -466,35 +467,35 @@ static int buffer_prepare(struct vb2_buffer *vb)

 	switch (core->field) {
 	case V4L2_FIELD_TOP:
-		cx88_risc_buffer(dev->pci, &buf->risc,
-				 sgt->sgl, 0, UNSET,
-				 buf->bpl, 0, core->height);
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl, 0, UNSET,
+				       buf->bpl, 0, core->height);
 		break;
 	case V4L2_FIELD_BOTTOM:
-		cx88_risc_buffer(dev->pci, &buf->risc,
-				 sgt->sgl, UNSET, 0,
-				 buf->bpl, 0, core->height);
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl, UNSET, 0,
+				       buf->bpl, 0, core->height);
 		break;
 	case V4L2_FIELD_SEQ_TB:
-		cx88_risc_buffer(dev->pci, &buf->risc,
-				 sgt->sgl,
-				 0, buf->bpl * (core->height >> 1),
-				 buf->bpl, 0,
-				 core->height >> 1);
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl,
+				       0, buf->bpl * (core->height >> 1),
+				       buf->bpl, 0,
+				       core->height >> 1);
 		break;
 	case V4L2_FIELD_SEQ_BT:
-		cx88_risc_buffer(dev->pci, &buf->risc,
-				 sgt->sgl,
-				 buf->bpl * (core->height >> 1), 0,
-				 buf->bpl, 0,
-				 core->height >> 1);
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl,
+				       buf->bpl * (core->height >> 1), 0,
+				       buf->bpl, 0,
+				       core->height >> 1);
 		break;
 	case V4L2_FIELD_INTERLACED:
 	default:
-		cx88_risc_buffer(dev->pci, &buf->risc,
-				 sgt->sgl, 0, buf->bpl,
-				 buf->bpl, buf->bpl,
-				 core->height >> 1);
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl, 0, buf->bpl,
+				       buf->bpl, buf->bpl,
+				       core->height >> 1);
 		break;
 	}
 	dprintk(2,
@@ -502,7 +503,7 @@ static int buffer_prepare(struct vb2_buffer *vb)
 		buf, buf->vb.vb2_buf.index,
 		core->width, core->height, dev->fmt->depth, dev->fmt->name,
 		(unsigned long)buf->risc.dma);
-	return 0;
+	return ret;
 }

 static void buffer_finish(struct vb2_buffer *vb)
@@ -217,6 +217,7 @@ static int fimc_is_register_subdevs(struct fimc_is *is)

 			if (ret < 0 || index >= FIMC_IS_SENSORS_NUM) {
 				of_node_put(child);
+				of_node_put(i2c_bus);
 				return ret;
 			}
 			index++;
@@ -464,7 +464,7 @@ static int xvip_graph_dma_init(struct xvip_composite_device *xdev)
 {
 	struct device_node *ports;
 	struct device_node *port;
-	int ret;
+	int ret = 0;

 	ports = of_get_child_by_name(xdev->dev->of_node, "ports");
 	if (ports == NULL) {
@@ -474,13 +474,14 @@ static int xvip_graph_dma_init(struct xvip_composite_device *xdev)

 	for_each_child_of_node(ports, port) {
 		ret = xvip_graph_dma_init_one(xdev, port);
-		if (ret < 0) {
+		if (ret) {
 			of_node_put(port);
-			return ret;
+			break;
 		}
 	}

-	return 0;
+	of_node_put(ports);
+	return ret;
 }

 static void xvip_graph_cleanup(struct xvip_composite_device *xdev)
@@ -135,6 +135,7 @@ const struct lpddr2_timings *of_get_ddr_timings(struct device_node *np_ddr,
 	for_each_child_of_node(np_ddr, np_tim) {
 		if (of_device_is_compatible(np_tim, tim_compat)) {
 			if (of_do_get_timings(np_tim, &timings[i])) {
+				of_node_put(np_tim);
 				devm_kfree(dev, timings);
 				goto default_timings;
 			}
@@ -89,6 +89,19 @@ static int mx25_tsadc_setup_irq(struct platform_device *pdev,
 	return 0;
 }

+static int mx25_tsadc_unset_irq(struct platform_device *pdev)
+{
+	struct mx25_tsadc *tsadc = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (irq) {
+		irq_set_chained_handler_and_data(irq, NULL, NULL);
+		irq_domain_remove(tsadc->domain);
+	}
+
+	return 0;
+}
+
 static void mx25_tsadc_setup_clk(struct platform_device *pdev,
 				 struct mx25_tsadc *tsadc)
 {
@@ -176,18 +189,21 @@ static int mx25_tsadc_probe(struct platform_device *pdev)

 	platform_set_drvdata(pdev, tsadc);

-	return devm_of_platform_populate(dev);
+	ret = devm_of_platform_populate(dev);
+	if (ret)
+		goto err_irq;
+
+	return 0;
+
+err_irq:
+	mx25_tsadc_unset_irq(pdev);
+
+	return ret;
 }

 static int mx25_tsadc_remove(struct platform_device *pdev)
 {
-	struct mx25_tsadc *tsadc = platform_get_drvdata(pdev);
-	int irq = platform_get_irq(pdev, 0);
-
-	if (irq) {
-		irq_set_chained_handler_and_data(irq, NULL, NULL);
-		irq_domain_remove(tsadc->domain);
-	}
+	mx25_tsadc_unset_irq(pdev);

 	return 0;
 }
@@ -118,6 +118,7 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
 	return 0;

 err_del_irq_chip:
+	pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
 	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
 	return ret;
 }
@@ -179,6 +179,7 @@ int lp8788_irq_init(struct lp8788 *lp, int irq)
 				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				"lp8788-irq", irqd);
 	if (ret) {
+		irq_domain_remove(lp->irqdm);
 		dev_err(lp->dev, "failed to create a thread for IRQ_N\n");
 		return ret;
 	}
@@ -192,4 +193,6 @@ void lp8788_irq_exit(struct lp8788 *lp)
 {
 	if (lp->irq)
 		free_irq(lp->irq, lp->irqdm);
+	if (lp->irqdm)
+		irq_domain_remove(lp->irqdm);
 }
@@ -199,8 +199,16 @@ static int lp8788_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 	if (ret)
 		return ret;

-	return mfd_add_devices(lp->dev, -1, lp8788_devs,
-			       ARRAY_SIZE(lp8788_devs), NULL, 0, NULL);
+	ret = mfd_add_devices(lp->dev, -1, lp8788_devs,
+			      ARRAY_SIZE(lp8788_devs), NULL, 0, NULL);
+	if (ret)
+		goto err_exit_irq;
+
+	return 0;
+
+err_exit_irq:
+	lp8788_irq_exit(lp);
+	return ret;
 }

 static int lp8788_remove(struct i2c_client *cl)
@@ -1738,7 +1738,12 @@ static struct platform_driver sm501_plat_driver = {

 static int __init sm501_base_init(void)
 {
-	platform_driver_register(&sm501_plat_driver);
+	int ret;
+
+	ret = platform_driver_register(&sm501_plat_driver);
+	if (ret < 0)
+		return ret;
+
 	return pci_register_driver(&sm501_pci_driver);
 }

@@ -787,7 +787,8 @@ try_again:
 	 * the CCS bit is set as well. We deliberately deviate from the spec in
 	 * regards to this, which allows UHS-I to be supported for SDSC cards.
 	 */
-	if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) {
+	if (!mmc_host_is_spi(host) && (ocr & SD_OCR_S18R) &&
+	    rocr && (*rocr & SD_ROCR_S18A)) {
 		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;
@@ -1118,8 +1118,9 @@ out5:
 	if (host->platdata && host->platdata->cd_setup &&
 	    !(mmc->caps & MMC_CAP_NEEDS_POLL))
 		host->platdata->cd_setup(mmc, 0);
-out_clk:
+
 	clk_disable_unprepare(host->clk);
+out_clk:
 	clk_put(host->clk);
 out_irq:
 	free_irq(host->irq, host);
@@ -853,7 +853,7 @@ static int wmt_mci_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->clk_sdmmc)) {
 		dev_err(&pdev->dev, "Error getting clock\n");
 		ret = PTR_ERR(priv->clk_sdmmc);
-		goto fail5;
+		goto fail5_and_a_half;
 	}

 	ret = clk_prepare_enable(priv->clk_sdmmc);
@@ -870,6 +870,9 @@ static int wmt_mci_probe(struct platform_device *pdev)
 	return 0;
 fail6:
 	clk_put(priv->clk_sdmmc);
+fail5_and_a_half:
+	dma_free_coherent(&pdev->dev, mmc->max_blk_count * 16,
+			  priv->dma_desc_buffer, priv->dma_desc_device_addr);
 fail5:
 	free_irq(dma_irq, priv);
 fail4:
@@ -1990,9 +1990,14 @@ static int __init docg3_probe(struct platform_device *pdev)
 		dev_err(dev, "No I/O memory resource defined\n");
 		return ret;
 	}
-	base = devm_ioremap(dev, ress->start, DOC_IOSPACE_SIZE);

 	ret = -ENOMEM;
+	base = devm_ioremap(dev, ress->start, DOC_IOSPACE_SIZE);
+	if (!base) {
+		dev_err(dev, "devm_ioremap dev failed\n");
+		return ret;
+	}
+
 	cascade = devm_kcalloc(dev, DOC_MAX_NBFLOORS, sizeof(*cascade),
 			       GFP_KERNEL);
 	if (!cascade)
@@ -398,6 +398,7 @@ static int atmel_nand_dma_transfer(struct atmel_nand_controller *nc,

 	dma_async_issue_pending(nc->dmac);
 	wait_for_completion(&finished);
+	dma_unmap_single(nc->dev, buf_dma, len, dir);

 	return 0;