arm/dts: display: add panel dtsi for rhode
add panel dtsi for rhode 1. tianma nt37701 6.55 inch panel 2. csot nt37701 6.55 inch panel Change-Id: I2bf4e5e7434d8ed32c3e5f5d4b8273aa9c0ffa11 Signed-off-by: tanhua1 <tanhua1@motorola.com> Reviewed-on: https://gerrit.mot.com/2107505 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key
This commit is contained in:
tanhua1 authored and Carlos Pinho committed
1 parent
54e74d352f
commit
13a0657289
3 files changed
+822
-3
No files matched your search
@@ -0,0 +1,349 @@
|
||||
/* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
&mdss_mdp {
|
||||
mot_csot_nt37701_655_1080x2400_dsc_cmd_v0: qcom,mdss_dsi_mot_csot_nt37701_655_1080x2400_dsc_cmd_v0 {
|
||||
compatible = "qcom,mdss-dsi-panel";
|
||||
qcom,mdss-dsi-panel-name = "mipi_mot_cmd_csot_1080p_dsc_655";
|
||||
qcom,mdss-dsi-panel-supplier = "csot";
|
||||
qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
|
||||
qcom,mdss-dsi-virtual-channel-id = <0>;
|
||||
qcom,mdss-dsi-stream = <0>;
|
||||
qcom,mdss-pan-physical-width-dimension = <68>;
|
||||
qcom,mdss-pan-physical-height-dimension = <152>;
|
||||
qcom,mdss-dsi-bpp = <30>;
|
||||
qcom,mdss-dsi-underflow-color = <0xff>;
|
||||
qcom,mdss-dsi-border-color = <0>;
|
||||
qcom,mdss-dsi-panel-param-verision = <121201>;
|
||||
qcom,mdss-dsi-panel-param-num = <5>;
|
||||
|
||||
qcom,dsi-ctrl-num = <0>;
|
||||
qcom,dsi-phy-num = <0>;
|
||||
|
||||
qcom,mdss-dsi-traffic-mode = "burst_mode";
|
||||
qcom,mdss-dsi-bllp-eof-power-mode;
|
||||
qcom,mdss-dsi-bllp-power-mode;
|
||||
qcom,mdss-dsi-lane-0-state;
|
||||
qcom,mdss-dsi-lane-1-state;
|
||||
qcom,mdss-dsi-lane-2-state;
|
||||
qcom,mdss-dsi-lane-3-state;
|
||||
|
||||
qcom,mdss-dsi-dma-trigger = "trigger_sw";
|
||||
qcom,mdss-dsi-mdp-trigger = "none";
|
||||
qcom,mdss-dsi-reset-sequence = <0 11>, <1 1>, <0 1>, <1 11>;
|
||||
qcom,mdss-dsi-lp11-init;
|
||||
qcom,mdss-dsi-tx-eot-append;
|
||||
qcom,mdss-dsi-te-pin-select = <1>;
|
||||
qcom,mdss-dsi-te-dcs-command = <1>;
|
||||
|
||||
qcom,mdss-dsi-te-using-te-pin;
|
||||
|
||||
qcom,bklt-dcs-2bytes-enabled;
|
||||
qcom,mdss-dsi-bl-min-level = <3>;
|
||||
qcom,mdss-dsi-bl-max-level = <4095>;
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
|
||||
|
||||
qcom,mdss-dsi-panel-hdr-enabled;
|
||||
qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
|
||||
17000 15500 30000 8000 3000>;
|
||||
qcom,mdss-dsi-panel-peak-brightness = <4200000>;
|
||||
|
||||
qcom,mdss-dsi-panel-blackness-level = <3230>;
|
||||
|
||||
qcom,mdss-dsi-hbm-on-command = [
|
||||
39 01 00 00 00 00 03 51 0F FF];
|
||||
qcom,mdss-dsi-hbm-off-command = [
|
||||
39 01 00 00 00 00 03 51 07 FF];
|
||||
|
||||
qcom,mdss-dsi-hbm-fod;
|
||||
qcom,mdss-dsi-hbm-fod-on-command = [
|
||||
39 01 00 00 00 00 03 51 0F FF];
|
||||
|
||||
//qcom,mdss-dsi-acl-on-command = [
|
||||
// 39 01 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
// 15 00 00 00 00 00 02 B0 0C
|
||||
// 15 01 00 00 00 00 02 55 05];
|
||||
//qcom,mdss-dsi-acl-off-command = [
|
||||
// 15 01 00 00 00 00 02 55 00];
|
||||
|
||||
qcom,mdss-dsi-dc-off-command = [
|
||||
39 00 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 00 00 00 00 00 02 B2 18
|
||||
15 00 00 00 00 00 02 6F 0F
|
||||
39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
|
||||
39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
|
||||
15 00 00 00 00 00 02 6F 0C
|
||||
39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
|
||||
15 00 00 00 00 00 02 6F 18
|
||||
39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
|
||||
15 01 00 00 00 00 02 58 00];
|
||||
qcom,mdss-dsi-dc-off-command-state = "dsi_lp_mode";
|
||||
|
||||
qcom,mdss-dsi-dc-on-command = [
|
||||
39 00 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 00 00 00 00 00 02 B2 98
|
||||
15 00 00 00 00 00 02 6F 0F
|
||||
39 00 00 00 00 00 09 B2 60 50 60 00 80 00 2F FF
|
||||
39 00 00 00 00 00 0D B3 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
15 00 00 00 00 00 02 6F 0C
|
||||
39 00 00 00 00 00 0D B3 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
15 00 00 00 00 00 02 6F 18
|
||||
39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
|
||||
15 01 00 00 00 00 02 58 01];
|
||||
qcom,mdss-dsi-dc-on-command-state = "dsi_lp_mode";
|
||||
|
||||
qcom,mdss-dsi-display-timings {
|
||||
timing@0{
|
||||
qcom,mdss-dsi-cmd-mode;
|
||||
qcom,mdss-dsi-panel-framerate = <48>;
|
||||
qcom,mdss-dsi-panel-width = <1080>;
|
||||
qcom,mdss-dsi-panel-height = <2400>;
|
||||
qcom,mdss-dsi-h-front-porch = <32>;
|
||||
qcom,mdss-dsi-h-back-porch = <32>;
|
||||
qcom,mdss-dsi-h-pulse-width = <16>;
|
||||
qcom,mdss-dsi-h-sync-skew = <0>;
|
||||
qcom,mdss-dsi-h-sync-pulse = <0>;
|
||||
qcom,mdss-dsi-v-back-porch = <4>;
|
||||
qcom,mdss-dsi-v-front-porch = <12>;
|
||||
qcom,mdss-dsi-v-pulse-width = <4>;
|
||||
qcom,mdss-dsi-h-left-border = <0>;
|
||||
qcom,mdss-dsi-h-right-border = <0>;
|
||||
qcom,mdss-dsi-v-top-border = <0>;
|
||||
qcom,mdss-dsi-v-bottom-border = <0>;
|
||||
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
|
||||
qcom,mdss-dsi-timing-switch-command = [
|
||||
15 01 00 00 14 00 02 2F 08 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
|
||||
];
|
||||
|
||||
qcom,mdss-dsi-on-command = [
|
||||
39 00 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 00 00 00 00 00 02 B2 18
|
||||
15 00 00 00 00 00 02 6F 0F
|
||||
39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
|
||||
39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
|
||||
15 00 00 00 00 00 02 6F 0C
|
||||
39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
|
||||
15 00 00 00 00 00 02 6F 18
|
||||
39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
|
||||
15 01 00 00 00 00 02 58 00 //DC code
|
||||
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 01 00 00 00 00 02 6F 1C
|
||||
39 01 00 00 00 00 06 C0 15 27 38 49 00
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 04
|
||||
15 01 00 00 00 00 02 CB 06
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 01
|
||||
39 01 00 00 00 00 03 CD 05 71
|
||||
|
||||
39 01 00 00 00 00 05 3B 00 1A 00 20
|
||||
|
||||
15 01 00 00 00 00 02 03 01
|
||||
15 01 00 00 00 00 02 90 01
|
||||
39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
|
||||
15 01 00 00 00 00 02 2C 00 //dsc config 10bit
|
||||
|
||||
39 01 00 00 00 00 03 51 00 00
|
||||
15 01 00 00 00 00 02 53 20
|
||||
15 01 00 00 00 00 02 35 00 //te enable
|
||||
|
||||
39 01 00 00 00 00 05 2A 00 00 04 37
|
||||
39 01 00 00 00 00 05 2B 00 00 09 5F
|
||||
|
||||
15 01 00 00 00 00 02 2F 08 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
|
||||
|
||||
05 01 00 00 C8 00 01 11
|
||||
05 01 00 00 00 00 01 29]; /* display on */
|
||||
qcom,mdss-dsi-off-command = [
|
||||
05 01 00 00 00 00 01 28 /* display_off */
|
||||
05 01 00 00 78 00 01 10]; /* enter sleep mode */
|
||||
|
||||
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-timing-switch-command-state =
|
||||
"dsi_lp_mode";
|
||||
qcom,compression-mode = "dsc";
|
||||
/* Why QCOM doesn't use this, even it used 2 encoder
|
||||
* as for that dsi_sw43404_amoled_cmd, for ex */
|
||||
/* qcom,mdss-dsc-encoders = <2>; */
|
||||
qcom,mdss-dsc-version = <0x11>;
|
||||
qcom,mdss-dsc-slice-height = <12>;
|
||||
qcom,mdss-dsc-slice-width = <1080>;
|
||||
qcom,mdss-dsc-slice-per-pkt = <1>;
|
||||
qcom,mdss-dsc-bit-per-component = <8>;
|
||||
qcom,mdss-dsc-bit-per-pixel = <8>;
|
||||
qcom,mdss-dsc-block-prediction-enable;
|
||||
};
|
||||
timing@1{
|
||||
qcom,mdss-dsi-cmd-mode;
|
||||
qcom,mdss-dsi-panel-framerate = <60>;
|
||||
qcom,mdss-dsi-panel-width = <1080>;
|
||||
qcom,mdss-dsi-panel-height = <2400>;
|
||||
qcom,mdss-dsi-h-front-porch = <32>;
|
||||
qcom,mdss-dsi-h-back-porch = <32>;
|
||||
qcom,mdss-dsi-h-pulse-width = <16>;
|
||||
qcom,mdss-dsi-h-sync-skew = <0>;
|
||||
qcom,mdss-dsi-h-sync-pulse = <0>;
|
||||
qcom,mdss-dsi-v-back-porch = <4>;
|
||||
qcom,mdss-dsi-v-front-porch = <12>;
|
||||
qcom,mdss-dsi-v-pulse-width = <4>;
|
||||
qcom,mdss-dsi-h-left-border = <0>;
|
||||
qcom,mdss-dsi-h-right-border = <0>;
|
||||
qcom,mdss-dsi-v-top-border = <0>;
|
||||
qcom,mdss-dsi-v-bottom-border = <0>;
|
||||
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
|
||||
qcom,mdss-dsi-timing-switch-command = [
|
||||
15 01 00 00 10 00 02 2F 03 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
|
||||
];
|
||||
|
||||
qcom,mdss-dsi-on-command = [
|
||||
39 00 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 00 00 00 00 00 02 B2 18
|
||||
15 00 00 00 00 00 02 6F 0F
|
||||
39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
|
||||
39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
|
||||
15 00 00 00 00 00 02 6F 0C
|
||||
39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
|
||||
15 00 00 00 00 00 02 6F 18
|
||||
39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
|
||||
15 01 00 00 00 00 02 58 00 //DC code
|
||||
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 01 00 00 00 00 02 6F 1C
|
||||
39 01 00 00 00 00 06 C0 15 27 38 49 00
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 04
|
||||
15 01 00 00 00 00 02 CB 06
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 01
|
||||
39 01 00 00 00 00 03 CD 05 71
|
||||
|
||||
39 01 00 00 00 00 05 3B 00 1A 00 20
|
||||
|
||||
15 01 00 00 00 00 02 03 01
|
||||
15 01 00 00 00 00 02 90 01
|
||||
39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
|
||||
15 01 00 00 00 00 02 2C 00 //dsc config 10bit
|
||||
|
||||
39 01 00 00 00 00 03 51 00 00
|
||||
15 01 00 00 00 00 02 53 20
|
||||
15 01 00 00 00 00 02 35 00 //te enable
|
||||
|
||||
39 01 00 00 00 00 05 2A 00 00 04 37
|
||||
39 01 00 00 00 00 05 2B 00 00 09 5F
|
||||
|
||||
15 01 00 00 00 00 02 2F 03 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
|
||||
|
||||
05 01 00 00 6e 00 01 11
|
||||
05 01 00 00 00 00 01 29]; /* display on */
|
||||
qcom,mdss-dsi-off-command = [
|
||||
05 01 00 00 00 00 01 28 /* display_off */
|
||||
05 01 00 00 78 00 01 10]; /* enter sleep mode */
|
||||
|
||||
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-timing-switch-command-state =
|
||||
"dsi_lp_mode";
|
||||
qcom,compression-mode = "dsc";
|
||||
/* Why QCOM doesn't use this, even it used 2 encoder
|
||||
* as for that dsi_sw43404_amoled_cmd, for ex */
|
||||
/* qcom,mdss-dsc-encoders = <2>; */
|
||||
qcom,mdss-dsc-version = <0x11>;
|
||||
qcom,mdss-dsc-slice-height = <12>;
|
||||
qcom,mdss-dsc-slice-width = <1080>;
|
||||
qcom,mdss-dsc-slice-per-pkt = <1>;
|
||||
qcom,mdss-dsc-bit-per-component = <8>;
|
||||
qcom,mdss-dsc-bit-per-pixel = <8>;
|
||||
qcom,mdss-dsc-block-prediction-enable;
|
||||
};
|
||||
timing@2{
|
||||
qcom,mdss-dsi-cmd-mode;
|
||||
qcom,mdss-dsi-panel-framerate = <90>;
|
||||
qcom,mdss-dsi-panel-width = <1080>;
|
||||
qcom,mdss-dsi-panel-height = <2400>;
|
||||
qcom,mdss-dsi-h-front-porch = <32>;
|
||||
qcom,mdss-dsi-h-back-porch = <32>;
|
||||
qcom,mdss-dsi-h-pulse-width = <16>;
|
||||
qcom,mdss-dsi-h-sync-skew = <0>;
|
||||
qcom,mdss-dsi-h-sync-pulse = <0>;
|
||||
qcom,mdss-dsi-v-back-porch = <4>;
|
||||
qcom,mdss-dsi-v-front-porch = <12>;
|
||||
qcom,mdss-dsi-v-pulse-width = <4>;
|
||||
qcom,mdss-dsi-h-left-border = <0>;
|
||||
qcom,mdss-dsi-h-right-border = <0>;
|
||||
qcom,mdss-dsi-v-top-border = <0>;
|
||||
qcom,mdss-dsi-v-bottom-border = <0>;
|
||||
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
|
||||
qcom,mdss-dsi-timing-switch-command = [
|
||||
15 01 00 00 0b 00 02 2F 07 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
|
||||
];
|
||||
|
||||
qcom,mdss-dsi-on-command = [
|
||||
39 00 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 00 00 00 00 00 02 B2 18
|
||||
15 00 00 00 00 00 02 6F 0F
|
||||
39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
|
||||
39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
|
||||
15 00 00 00 00 00 02 6F 0C
|
||||
39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
|
||||
15 00 00 00 00 00 02 6F 18
|
||||
39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
|
||||
15 01 00 00 00 00 02 58 00 //DC code
|
||||
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 01 00 00 00 00 02 6F 1C
|
||||
39 01 00 00 00 00 06 C0 15 27 38 49 00
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 04
|
||||
15 01 00 00 00 00 02 CB 06
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 01
|
||||
39 01 00 00 00 00 03 CD 05 71
|
||||
|
||||
39 01 00 00 00 00 05 3B 00 1A 00 20
|
||||
|
||||
15 01 00 00 00 00 02 03 01
|
||||
15 01 00 00 00 00 02 90 01
|
||||
39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
|
||||
15 01 00 00 00 00 02 2C 00 //dsc config 10bit
|
||||
|
||||
39 01 00 00 00 00 03 51 00 00
|
||||
15 01 00 00 00 00 02 53 20
|
||||
15 01 00 00 00 00 02 35 00 //te enable
|
||||
|
||||
39 01 00 00 00 00 05 2A 00 00 04 37
|
||||
39 01 00 00 00 00 05 2B 00 00 09 5F
|
||||
|
||||
15 01 00 00 00 00 02 2F 07 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
|
||||
|
||||
05 01 00 00 56 00 01 11
|
||||
05 01 00 00 00 00 01 29]; /* display on */
|
||||
qcom,mdss-dsi-off-command = [
|
||||
05 01 00 00 00 00 01 28 /* display_off */
|
||||
05 01 00 00 78 00 01 10]; /* enter sleep mode */
|
||||
|
||||
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-timing-switch-command-state =
|
||||
"dsi_lp_mode";
|
||||
qcom,compression-mode = "dsc";
|
||||
/* Why QCOM doesn't use this, even it used 2 encoder
|
||||
* as for that dsi_sw43404_amoled_cmd, for ex */
|
||||
/* qcom,mdss-dsc-encoders = <2>; */
|
||||
qcom,mdss-dsc-version = <0x11>;
|
||||
qcom,mdss-dsc-slice-height = <12>;
|
||||
qcom,mdss-dsc-slice-width = <1080>;
|
||||
qcom,mdss-dsc-slice-per-pkt = <1>;
|
||||
qcom,mdss-dsc-bit-per-component = <8>;
|
||||
qcom,mdss-dsc-bit-per-pixel = <8>;
|
||||
qcom,mdss-dsc-block-prediction-enable;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
@@ -0,0 +1,291 @@
|
||||
/* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
&mdss_mdp {
|
||||
mot_tm_nt37701_655_1080x2400_dsc_cmd_v0: qcom,mdss_dsi_mot_tm_nt37701_655_1080x2400_dsc_cmd_v0 {
|
||||
compatible = "qcom,mdss-dsi-panel";
|
||||
qcom,mdss-dsi-panel-name = "mipi_mot_cmd_tm_1080p_dsc_655";
|
||||
qcom,mdss-dsi-panel-supplier = "tianma";
|
||||
qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
|
||||
qcom,mdss-dsi-virtual-channel-id = <0>;
|
||||
qcom,mdss-dsi-stream = <0>;
|
||||
qcom,mdss-pan-physical-width-dimension = <68>;
|
||||
qcom,mdss-pan-physical-height-dimension = <152>;
|
||||
qcom,mdss-dsi-bpp = <30>;
|
||||
qcom,mdss-dsi-underflow-color = <0xff>;
|
||||
qcom,mdss-dsi-border-color = <0>;
|
||||
qcom,mdss-dsi-panel-param-verision = <121201>;
|
||||
qcom,mdss-dsi-panel-param-num = <5>;
|
||||
|
||||
qcom,dsi-ctrl-num = <0>;
|
||||
qcom,dsi-phy-num = <0>;
|
||||
|
||||
qcom,mdss-dsi-traffic-mode = "burst_mode";
|
||||
qcom,mdss-dsi-bllp-eof-power-mode;
|
||||
qcom,mdss-dsi-bllp-power-mode;
|
||||
qcom,mdss-dsi-lane-0-state;
|
||||
qcom,mdss-dsi-lane-1-state;
|
||||
qcom,mdss-dsi-lane-2-state;
|
||||
qcom,mdss-dsi-lane-3-state;
|
||||
|
||||
qcom,mdss-dsi-dma-trigger = "trigger_sw";
|
||||
qcom,mdss-dsi-mdp-trigger = "none";
|
||||
qcom,mdss-dsi-reset-sequence = <0 11>, <1 1>, <0 1>, <1 11>;
|
||||
qcom,mdss-dsi-lp11-init;
|
||||
qcom,mdss-dsi-tx-eot-append;
|
||||
qcom,mdss-dsi-te-pin-select = <1>;
|
||||
qcom,mdss-dsi-te-dcs-command = <1>;
|
||||
|
||||
qcom,mdss-dsi-te-using-te-pin;
|
||||
|
||||
qcom,bklt-dcs-2bytes-enabled;
|
||||
qcom,mdss-dsi-bl-min-level = <3>;
|
||||
qcom,mdss-dsi-bl-max-level = <4095>;
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
|
||||
|
||||
qcom,mdss-dsi-panel-hdr-enabled;
|
||||
qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
|
||||
17000 15500 30000 8000 3000>;
|
||||
qcom,mdss-dsi-panel-peak-brightness = <4200000>;
|
||||
|
||||
qcom,mdss-dsi-panel-blackness-level = <3230>;
|
||||
|
||||
qcom,mdss-dsi-hbm-on-command = [
|
||||
39 01 00 00 00 00 03 51 0F FF];
|
||||
qcom,mdss-dsi-hbm-off-command = [
|
||||
39 01 00 00 00 00 03 51 07 FF];
|
||||
|
||||
qcom,mdss-dsi-hbm-fod;
|
||||
qcom,mdss-dsi-hbm-fod-on-command = [
|
||||
39 01 00 00 00 00 03 51 0F FF];
|
||||
|
||||
//qcom,mdss-dsi-acl-on-command = [
|
||||
// 39 01 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
// 15 00 00 00 00 00 02 B0 0C
|
||||
// 15 01 00 00 00 00 02 55 05];
|
||||
//qcom,mdss-dsi-acl-off-command = [
|
||||
// 15 01 00 00 00 00 02 55 00];
|
||||
|
||||
|
||||
qcom,mdss-dsi-display-timings {
|
||||
timing@0{
|
||||
qcom,mdss-dsi-cmd-mode;
|
||||
qcom,mdss-dsi-panel-framerate = <48>;
|
||||
qcom,mdss-dsi-panel-width = <1080>;
|
||||
qcom,mdss-dsi-panel-height = <2400>;
|
||||
qcom,mdss-dsi-h-front-porch = <32>;
|
||||
qcom,mdss-dsi-h-back-porch = <32>;
|
||||
qcom,mdss-dsi-h-pulse-width = <16>;
|
||||
qcom,mdss-dsi-h-sync-skew = <0>;
|
||||
qcom,mdss-dsi-h-sync-pulse = <0>;
|
||||
qcom,mdss-dsi-v-back-porch = <4>;
|
||||
qcom,mdss-dsi-v-front-porch = <12>;
|
||||
qcom,mdss-dsi-v-pulse-width = <4>;
|
||||
qcom,mdss-dsi-h-left-border = <0>;
|
||||
qcom,mdss-dsi-h-right-border = <0>;
|
||||
qcom,mdss-dsi-v-top-border = <0>;
|
||||
qcom,mdss-dsi-v-bottom-border = <0>;
|
||||
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
|
||||
qcom,mdss-dsi-timing-switch-command = [
|
||||
15 01 00 00 14 00 02 2F 08 //08:48Hz 01:60Hz 03:90Hz 02:120Hz 04:144Hz
|
||||
];
|
||||
|
||||
qcom,mdss-dsi-on-command = [
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 01 00 00 00 00 02 6F 1C
|
||||
39 01 00 00 00 00 06 C0 15 27 38 49 00
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 04
|
||||
15 01 00 00 00 00 02 CB 86
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 01
|
||||
39 01 00 00 00 00 03 CD 05 62
|
||||
39 01 00 00 00 00 05 3B 00 10 00 20
|
||||
|
||||
15 01 00 00 00 00 02 03 01
|
||||
15 01 00 00 00 00 02 90 01
|
||||
39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
|
||||
15 01 00 00 00 00 02 2C 00 //dsc config 10bit
|
||||
|
||||
15 01 00 00 00 00 02 5F 00
|
||||
39 01 00 00 00 00 03 51 00 00
|
||||
15 01 00 00 00 00 02 53 20
|
||||
15 01 00 00 00 00 02 35 00 //te enable
|
||||
|
||||
39 01 00 00 00 00 05 2A 00 00 04 37
|
||||
39 01 00 00 00 00 05 2B 00 00 09 5F
|
||||
|
||||
15 01 00 00 00 00 02 2F 08 //08:49Hz 01:60Hz 03:90Hz 02:120Hz 04:144Hz
|
||||
|
||||
05 01 00 00 C8 00 01 11
|
||||
05 01 00 00 00 00 01 29]; /* display on */
|
||||
qcom,mdss-dsi-off-command = [
|
||||
05 01 00 00 00 00 01 28 /* display_off */
|
||||
05 01 00 00 78 00 01 10]; /* enter sleep mode */
|
||||
|
||||
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-timing-switch-command-state =
|
||||
"dsi_lp_mode";
|
||||
qcom,compression-mode = "dsc";
|
||||
/* Why QCOM doesn't use this, even it used 2 encoder
|
||||
* as for that dsi_sw43404_amoled_cmd, for ex */
|
||||
/* qcom,mdss-dsc-encoders = <2>; */
|
||||
qcom,mdss-dsc-version = <0x11>;
|
||||
qcom,mdss-dsc-slice-height = <12>;
|
||||
qcom,mdss-dsc-slice-width = <1080>;
|
||||
qcom,mdss-dsc-slice-per-pkt = <1>;
|
||||
qcom,mdss-dsc-bit-per-component = <8>;
|
||||
qcom,mdss-dsc-bit-per-pixel = <8>;
|
||||
qcom,mdss-dsc-block-prediction-enable;
|
||||
};
|
||||
timing@1{
|
||||
qcom,mdss-dsi-cmd-mode;
|
||||
qcom,mdss-dsi-panel-framerate = <60>;
|
||||
qcom,mdss-dsi-panel-width = <1080>;
|
||||
qcom,mdss-dsi-panel-height = <2400>;
|
||||
qcom,mdss-dsi-h-front-porch = <32>;
|
||||
qcom,mdss-dsi-h-back-porch = <32>;
|
||||
qcom,mdss-dsi-h-pulse-width = <16>;
|
||||
qcom,mdss-dsi-h-sync-skew = <0>;
|
||||
qcom,mdss-dsi-h-sync-pulse = <0>;
|
||||
qcom,mdss-dsi-v-back-porch = <4>;
|
||||
qcom,mdss-dsi-v-front-porch = <12>;
|
||||
qcom,mdss-dsi-v-pulse-width = <4>;
|
||||
qcom,mdss-dsi-h-left-border = <0>;
|
||||
qcom,mdss-dsi-h-right-border = <0>;
|
||||
qcom,mdss-dsi-v-top-border = <0>;
|
||||
qcom,mdss-dsi-v-bottom-border = <0>;
|
||||
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
|
||||
qcom,mdss-dsi-timing-switch-command = [
|
||||
15 01 00 00 10 00 02 2F 01 //08:49Hz 01:60Hz 03:90Hz 02:120Hz 04:144Hz
|
||||
];
|
||||
|
||||
qcom,mdss-dsi-on-command = [
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 01 00 00 00 00 02 6F 1C
|
||||
39 01 00 00 00 00 06 C0 15 27 38 49 00
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 04
|
||||
15 01 00 00 00 00 02 CB 86
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 01
|
||||
39 01 00 00 00 00 03 CD 05 62
|
||||
39 01 00 00 00 00 05 3B 00 10 00 20
|
||||
|
||||
15 01 00 00 00 00 02 03 01
|
||||
15 01 00 00 00 00 02 90 01
|
||||
39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
|
||||
15 01 00 00 00 00 02 2C 00 //dsc config 10bit
|
||||
|
||||
15 01 00 00 00 00 02 5F 00
|
||||
39 01 00 00 00 00 03 51 00 00
|
||||
15 01 00 00 00 00 02 53 20
|
||||
15 01 00 00 00 00 02 35 00 //te enable
|
||||
|
||||
39 01 00 00 00 00 05 2A 00 00 04 37
|
||||
39 01 00 00 00 00 05 2B 00 00 09 5F
|
||||
|
||||
15 01 00 00 00 00 02 2F 01 //08:49Hz 01:60Hz 03:90Hz 02:120Hz 04:144Hz
|
||||
|
||||
05 01 00 00 C8 00 01 11
|
||||
05 01 00 00 00 00 01 29]; /* display on */
|
||||
qcom,mdss-dsi-off-command = [
|
||||
05 01 00 00 00 00 01 28 /* display_off */
|
||||
05 01 00 00 78 00 01 10]; /* enter sleep mode */
|
||||
|
||||
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-timing-switch-command-state =
|
||||
"dsi_lp_mode";
|
||||
qcom,compression-mode = "dsc";
|
||||
/* Why QCOM doesn't use this, even it used 2 encoder
|
||||
* as for that dsi_sw43404_amoled_cmd, for ex */
|
||||
/* qcom,mdss-dsc-encoders = <2>; */
|
||||
qcom,mdss-dsc-version = <0x11>;
|
||||
qcom,mdss-dsc-slice-height = <12>;
|
||||
qcom,mdss-dsc-slice-width = <1080>;
|
||||
qcom,mdss-dsc-slice-per-pkt = <1>;
|
||||
qcom,mdss-dsc-bit-per-component = <8>;
|
||||
qcom,mdss-dsc-bit-per-pixel = <8>;
|
||||
qcom,mdss-dsc-block-prediction-enable;
|
||||
};
|
||||
timing@2{
|
||||
qcom,mdss-dsi-cmd-mode;
|
||||
qcom,mdss-dsi-panel-framerate = <90>;
|
||||
qcom,mdss-dsi-panel-width = <1080>;
|
||||
qcom,mdss-dsi-panel-height = <2400>;
|
||||
qcom,mdss-dsi-h-front-porch = <32>;
|
||||
qcom,mdss-dsi-h-back-porch = <32>;
|
||||
qcom,mdss-dsi-h-pulse-width = <16>;
|
||||
qcom,mdss-dsi-h-sync-skew = <0>;
|
||||
qcom,mdss-dsi-h-sync-pulse = <0>;
|
||||
qcom,mdss-dsi-v-back-porch = <4>;
|
||||
qcom,mdss-dsi-v-front-porch = <12>;
|
||||
qcom,mdss-dsi-v-pulse-width = <4>;
|
||||
qcom,mdss-dsi-h-left-border = <0>;
|
||||
qcom,mdss-dsi-h-right-border = <0>;
|
||||
qcom,mdss-dsi-v-top-border = <0>;
|
||||
qcom,mdss-dsi-v-bottom-border = <0>;
|
||||
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
|
||||
qcom,mdss-dsi-timing-switch-command = [
|
||||
15 01 00 00 0b 00 02 2F 03 //08:49Hz 01:60Hz 03:90Hz 02:120Hz 04:144Hz
|
||||
];
|
||||
|
||||
qcom,mdss-dsi-on-command = [
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 00
|
||||
15 01 00 00 00 00 02 6F 1C
|
||||
39 01 00 00 00 00 06 C0 15 27 38 49 00
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 04
|
||||
15 01 00 00 00 00 02 CB 86
|
||||
39 01 00 00 00 00 06 F0 55 AA 52 08 01
|
||||
39 01 00 00 00 00 03 CD 05 62
|
||||
39 01 00 00 00 00 05 3B 00 10 00 20
|
||||
|
||||
15 01 00 00 00 00 02 03 01
|
||||
15 01 00 00 00 00 02 90 01
|
||||
39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
|
||||
15 01 00 00 00 00 02 2C 00 //dsc config 10bit
|
||||
|
||||
15 01 00 00 00 00 02 5F 00
|
||||
39 01 00 00 00 00 03 51 00 00
|
||||
15 01 00 00 00 00 02 53 20
|
||||
15 01 00 00 00 00 02 35 00 //te enable
|
||||
|
||||
39 01 00 00 00 00 05 2A 00 00 04 37
|
||||
39 01 00 00 00 00 05 2B 00 00 09 5F
|
||||
|
||||
15 01 00 00 00 00 02 2F 03 //08:49Hz 01:60Hz 03:90Hz 02:120Hz 04:144Hz
|
||||
|
||||
05 01 00 00 C8 00 01 11
|
||||
05 01 00 00 00 00 01 29]; /* display on */
|
||||
qcom,mdss-dsi-off-command = [
|
||||
05 01 00 00 00 00 01 28 /* display_off */
|
||||
05 01 00 00 78 00 01 10]; /* enter sleep mode */
|
||||
|
||||
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-timing-switch-command-state =
|
||||
"dsi_lp_mode";
|
||||
qcom,compression-mode = "dsc";
|
||||
/* Why QCOM doesn't use this, even it used 2 encoder
|
||||
* as for that dsi_sw43404_amoled_cmd, for ex */
|
||||
/* qcom,mdss-dsc-encoders = <2>; */
|
||||
qcom,mdss-dsc-version = <0x11>;
|
||||
qcom,mdss-dsc-slice-height = <12>;
|
||||
qcom,mdss-dsc-slice-width = <1080>;
|
||||
qcom,mdss-dsc-slice-per-pkt = <1>;
|
||||
qcom,mdss-dsc-bit-per-component = <8>;
|
||||
qcom,mdss-dsc-bit-per-pixel = <8>;
|
||||
qcom,mdss-dsc-block-prediction-enable;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
@@ -1,5 +1,187 @@
|
||||
#include "dsi-panel-mot-dummy-qhd-video.dtsi"
|
||||
#include "dsi-panel-mot-csot-nt37701-655-1080x2400-dsc-cmd-common.dtsi"
|
||||
#include "dsi-panel-mot-tianma-nt37701-655-1080x2400-dsc-cmd-common.dtsi"
|
||||
|
||||
&tlmm {
|
||||
disp_vio_en_default: disp_vio_en_default {
|
||||
mux {
|
||||
pins = "gpio68";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio68";
|
||||
drive-strength = <8>;
|
||||
bias-disable = <0>;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
disp_vio: disp_vio {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "disp_vio";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&L19A>;
|
||||
gpio = <&tlmm 68 0>;
|
||||
startup-delay-us = <300>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&disp_vio_en_default>;
|
||||
};
|
||||
|
||||
dsi_panel_pwr_supply_amoled: dsi_panel_pwr_supply_amoled {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
qcom,panel-supply-entry@0 {
|
||||
reg = <0>;
|
||||
qcom,supply-name = "vddio";
|
||||
qcom,supply-min-voltage = <1800000>;
|
||||
qcom,supply-max-voltage = <1800000>;
|
||||
qcom,supply-enable-load = <60700>;
|
||||
qcom,supply-disable-load = <80>;
|
||||
qcom,supply-post-on-sleep = <2>;
|
||||
qcom,supply-post-off-sleep = <0>;
|
||||
};
|
||||
|
||||
/* qcom,panel-supply-entry@1 {
|
||||
reg = <1>;
|
||||
qcom,supply-name = "dvdd";
|
||||
qcom,supply-min-voltage = <1250000>;
|
||||
qcom,supply-max-voltage = <1250000>;
|
||||
qcom,supply-enable-load = <60700>;
|
||||
qcom,supply-disable-load = <10>;
|
||||
qcom,supply-post-on-sleep = <2>;
|
||||
qcom,supply-post-off-sleep = <2>;
|
||||
};
|
||||
|
||||
qcom,panel-supply-entry@2 {
|
||||
reg = <2>;
|
||||
qcom,supply-name = "vci";
|
||||
qcom,supply-min-voltage = <3000000>;
|
||||
qcom,supply-max-voltage = <3000000>;
|
||||
qcom,supply-enable-load = <30000>;
|
||||
qcom,supply-disable-load = <0>;
|
||||
qcom,supply-post-on-sleep = <0>;
|
||||
qcom,supply-post-off-sleep = <2>;
|
||||
};*/
|
||||
};
|
||||
|
||||
sde_dsi {
|
||||
qcom,dsi-default-panel = <&mot_csot_nt37701_655_1080x2400_dsc_cmd_v0>;
|
||||
|
||||
vddio-supply = <&disp_vio>;
|
||||
//dvdd-supply = <&disp_vio>;
|
||||
//vci-supply = <&disp_vio>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&mot_csot_nt37701_655_1080x2400_dsc_cmd_v0 {
|
||||
qcom,esd-check-enabled;
|
||||
qcom,mdss-dsi-panel-status-check-mode = "te_chk_reg_rd";
|
||||
qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
|
||||
qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-panel-status-value = <0x9c>;
|
||||
qcom,mdss-dsi-panel-status-read-length = <1>;
|
||||
|
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_amoled>;
|
||||
qcom,mdss-dsi-no-panel-on-read-support;
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
|
||||
qcom,mdss-dsi-bl-min-level = <9>;
|
||||
qcom,mdss-dsi-bl-max-level = <3514>;
|
||||
qcom,mdss-dsi-bl-default-level = <1757>;
|
||||
qcom,mdss-brightness-max-level = <3514>;
|
||||
qcom,platform-reset-gpio = <&tlmm 44 0>;
|
||||
qcom,bl-dsc-cmd-state = "dsi_hs_mode";
|
||||
|
||||
qcom,mdss-dsi-panel-hdr-enabled;
|
||||
qcom,mdss-dsi-panel-hdr-color-primaries = <14950 15750 34000
|
||||
16000 13000 35500 7000 2500>;
|
||||
qcom,mdss-dsi-panel-peak-brightness = <5000000>;
|
||||
qcom,mdss-dsi-panel-blackness-level = <100>;
|
||||
|
||||
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
|
||||
|
||||
qcom,mdss-dsi-display-timings {
|
||||
timing@0 {
|
||||
//qcom,mdss-dsi-panel-clockrate = <320000000>;
|
||||
qcom,display-topology = <1 1 1>;
|
||||
qcom,default-topology-index = <0>;
|
||||
qcom,mdss-dsi-panel-phy-timings = [00 0D 03 03 10 1D 04
|
||||
03 02 02 04 00 0C 08];
|
||||
};
|
||||
timing@1 {
|
||||
//qcom,mdss-dsi-panel-clockrate = <400000000>;
|
||||
qcom,display-topology = <1 1 1>;
|
||||
qcom,default-topology-index = <0>;
|
||||
qcom,mdss-dsi-panel-phy-timings = [00 10 03 03 11 1E 04
|
||||
04 03 02 04 00 0E 08];
|
||||
};
|
||||
timing@2 {
|
||||
//qcom,mdss-dsi-panel-clockrate = <601000000>;
|
||||
qcom,display-topology = <1 1 1>;
|
||||
qcom,default-topology-index = <0>;
|
||||
qcom,mdss-dsi-panel-phy-timings = [00 16 05 05 14 1F 06
|
||||
06 06 02 04 00 13 0A];
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mot_tm_nt37701_655_1080x2400_dsc_cmd_v0 {
|
||||
qcom,esd-check-enabled;
|
||||
qcom,mdss-dsi-panel-status-check-mode = "te_chk_reg_rd";
|
||||
qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
|
||||
qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-panel-status-value = <0x9c>;
|
||||
qcom,mdss-dsi-panel-status-read-length = <1>;
|
||||
|
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_amoled>;
|
||||
qcom,mdss-dsi-no-panel-on-read-support;
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
|
||||
qcom,mdss-dsi-bl-min-level = <9>;
|
||||
qcom,mdss-dsi-bl-max-level = <3514>;
|
||||
qcom,mdss-dsi-bl-default-level = <1757>;
|
||||
qcom,mdss-brightness-max-level = <3514>;
|
||||
qcom,platform-reset-gpio = <&tlmm 44 0>;
|
||||
qcom,bl-dsc-cmd-state = "dsi_hs_mode";
|
||||
|
||||
qcom,mdss-dsi-panel-hdr-enabled;
|
||||
qcom,mdss-dsi-panel-hdr-color-primaries = <14950 15750 34000
|
||||
16000 13000 35500 7000 2500>;
|
||||
qcom,mdss-dsi-panel-peak-brightness = <5000000>;
|
||||
qcom,mdss-dsi-panel-blackness-level = <100>;
|
||||
|
||||
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
|
||||
|
||||
qcom,mdss-dsi-display-timings {
|
||||
timing@0 {
|
||||
//qcom,mdss-dsi-panel-clockrate = <320000000>;
|
||||
qcom,display-topology = <1 1 1>;
|
||||
qcom,default-topology-index = <0>;
|
||||
qcom,mdss-dsi-panel-phy-timings = [00 0D 03 03 10 1D 04
|
||||
03 02 02 04 00 0C 08];
|
||||
};
|
||||
timing@1 {
|
||||
//qcom,mdss-dsi-panel-clockrate = <400000000>;
|
||||
qcom,display-topology = <1 1 1>;
|
||||
qcom,default-topology-index = <0>;
|
||||
qcom,mdss-dsi-panel-phy-timings = [00 10 03 03 11 1E 04
|
||||
04 03 02 04 00 0E 08];
|
||||
};
|
||||
timing@2 {
|
||||
//qcom,mdss-dsi-panel-clockrate = <601000000>;
|
||||
qcom,display-topology = <1 1 1>;
|
||||
qcom,default-topology-index = <0>;
|
||||
qcom,mdss-dsi-panel-phy-timings = [00 16 05 05 14 1F 06
|
||||
06 06 02 04 00 13 0A];
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mot_dummy_vid_qhd {
|
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;
|
||||
@@ -17,7 +199,4 @@
|
||||
};
|
||||
};
|
||||
|
||||
&sde_dsi {
|
||||
qcom,dsi-default-panel = <&mot_dummy_vid_qhd>;
|
||||
};
|
||||
|
||||
Reference in new issue
Block a user