AnyKernel3 pushes the format even further by allowing kernel developers to modify the underlying ramdisk for kernel feature support easily using a number of included command methods along with properties and variables.
__do.devicecheck=1__ specified requires at least device.name1 to be present. This should match ro.product.device or ro.build.product for your device. There is support for as many device.name# properties as needed. You may remove any empty ones that aren't being used.
__do.cleanup=0__ will keep the zip from removing it's working directory in /tmp/anykernel (by default) - this can be useful if trying to debug in adb shell whether the patches worked correctly.
__supported.versions=__ will match against ro.build.version.release from the current ROM's build.prop. It can be set to a list or range. As a list of one or more entries, e.g. `7.1.2` or `8.1.0, 9` it will look for exact matches, as a range, e.g. `7.1.2 - 9` it will check to make sure the current version falls within those limits. Whitespace optional, and supplied version values should be in the same number format they are in the build.prop value for that Android version.
__supported.patchlevels=__ will match against ro.build.version.security_patch from the current ROM's build.prop. It can be set as a closed or open-ended range of dates in the format YYYY-MM, whitespace optional, e.g. `2019-04 - 2019-06`, `2019-04 -` or `- 2019-06` where the last two examples show setting a minimum and maximum, respectively.
`block=auto` instead of a direct block filepath enables detection of the device boot partition for use with broad, device non-specific zips. Also accepts specifically `boot` or `recovery`.
`is_slot_device=1` enables detection of the suffix for the active boot partition on slot-based devices and will add this to the end of the supplied `block=` path. Also accepts `auto` for use with broad, device non-specific zips.
`ramdisk_compression=auto` allows automatically repacking the ramdisk with the format detected during unpack. Changing `auto` to `gz`, `lzo`, `lzma`, `xz`, `bz2`, `lz4`, or `lz4-l` (for lz4 legacy) instead forces the repack as that format, and using `cpio` or `none` will (attempt to) force the repack as uncompressed.
`customdd="<arguments>"` may be added to allow specifying additional dd parameters for devices that need to hack their kernel directly into a large partition like mmcblk0, or force use of dd for flashing.
__"if search string"__ is the string it looks for to decide whether it needs to add the tweak or not, so generally something to indicate the tweak already exists. __"cmdline entry name"__ behaves somewhat like this as a match check for the name of the cmdline entry to be changed/added by the _patch_cmdline_ function, followed by the full entry to replace it. __"prop name"__ also serves as a match check in _patch_prop_ for a property in the given prop file, but is only the prop name as the prop value is specified separately.
Similarly, __"line match string"__ and __"line replace string"__ are the search strings that locate where the modification needs to be made for those commands, __"begin search string"__ and __"end search string"__ are both required to select the first and last lines of the script block to be replaced for _replace_section_, and __"mount match name"__ and __"fs match type"__ are both required to narrow the _patch_fstab_ command down to the correct entry.
__"scope"__ may be specified as __"global"__ to force all instances of the string targeted by _replace_string_ to be replaced. Omitted or set to anything else and it will perform the default first-match replacement.
__"before|after"__ requires you simply specify __"before"__ or __"after"__ for the placement of the inserted line, in relation to __"line match string"__.
_dump_boot_ and _write_boot_ are the default method of unpacking/repacking, but for more granular control, or omitting ramdisk changes entirely ("OG AK" mode), these can be separated into _split_boot; unpack_ramdisk_ and _repack_ramdisk; flash_boot_ respectively. _flash_dtbo_ can be used to flash a dtbo image. It is automatically included in _write_boot_ but can be called separately if using "OG AK" mode or creating a dtbo only zip.
Multi-partition zips can be created by removing the ramdisk and patch folders from the zip and including instead "-files" folders named for the partition (without slot suffix), e.g. boot-files + recovery-files, or kernel-files + ramdisk-files (on some Treble devices). These then contain zImage, and ramdisk, patch, etc. subfolders for each partition. To setup for the next partition, simply set `block=` (without slot suffix) and `ramdisk_compression=` for the new target partition and use the _reset_ak_ command.
Similarly, multi-slot zips can be created with the normal zip layout for the active (current) slot, then resetting for the inactive slot by setting `block=` (without slot suffix) again, `slot_select=inactive` and `ramdisk_compression=` for the target slot and using the _reset_ak keep_ command, which will retain the patch and any added ramdisk files for the next slot.
_backup_file_ may be used for testing to ensure ramdisk changes are made correctly, transparency for the end-user, or in a ramdisk-only "mod" zip. In the latter case _restore_file_ could also be used to create a "restore" zip to undo the changes, but should be used with caution since the underlying patched files could be changed with ROM/kernel updates.
You may also use _ui_print "\<text\>"_ to write messages back to the recovery during the modification process, _abort "\<text>"_ to abort with optional message, and _file_getprop "\<file\>" "\<property\>"_ and _contains "\<string\>" "\<substring\>"_ to simplify string testing logic you might want in your script.
The AK3 repo includes current ARM builds of `magiskboot`, `magiskpolicy` and `busybox` by default to keep the basic package small. Builds for other architectures and optional binaries (see below) are available from the latest Magisk zip, or my latest AIK-mobile and FlashIt packages, respectively, here:
Optionally moving ARM builds to tools/arm and putting x86 builds in tools/x86 will enable architecture detection for use with broad, device non-specific zips.
1. Place final kernel build product, e.g. Image.gz-dtb or zImage to name a couple, in the zip root (separate dt, dtb or recovery_dtbo, and/or dtbo should also go here for devices that require custom ones, each will fallback to the original if not included)
4. Modify the anykernel.sh to add your kernel's name, boot partition location, permissions for added ramdisk files, and use methods for any required ramdisk modifications (optionally, also place banner and/or version files in the root to have these displayed during flash)
If supporting a recovery that forces zip signature verification (like Cyanogen Recovery) then you will need to also sign your zip using the method I describe here:
Not required, but any tweaks you can't hardcode into the source (best practice) should be added with an additional init.tweaks.rc or bootscript.sh to minimize the necessary ramdisk changes.
___If running into trouble when flashing an AK3 zip, the suffix -debugging may be added to the zip's filename to enable creation of a debug .tgz of /tmp for later examination while booted or on desktop.___
