duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
c3ec246acc6b1b4747a5dbdbf1bf324a1ae64ebf
android_kernel_motorola_sm6225/qcom/bengal-cebu-common-overlay.dtsi
T
hujing3 c3ec246acc arm/dts: Cebu: tp gpio conflict case update 
Cebu: cebu tp rst gpio66, tp int gpio67.
delete default gpio66/67 node cam_sensor_csi_mux_oe & cam_sensor_csi_mux_sel,
which are useless in cebu and conflict with tp gpio.

Change-Id: Iaf573328c6595a6db9b658fe9d3f8f8b7a5f128d
Signed-off-by: hujing3 <hujing3@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1651140
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianguo Liu <liujg6@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
2023-05-31 17:01:01 -03:00

328 lines
7.9 KiB
Devicetree
Raw Blame History

/* Copyright (c) 2019, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "bengal-moto-common-overlay.dtsi"
#include "bengal-cebu-display.dtsi"
#include "bengal-cebu-touchscreen-overlay.dtsi"
#include "bengal-audio-overlay.dtsi"
#include "bengal-cebu-awinic-audio-overlay.dtsi"
#include "camera/bengal-camera-sensor-mot-cebu-overlay.dtsi"
#include "bengal-guam-fps.dtsi"
#include "bengal-guam-moto-thermal.dtsi"
&qupv3_se4_2uart {
status = "ok"
};
&pm6125_gpios {
key_vol_up {
key_vol_up_default: key_vol_up_default {
pins = "gpio5";
function = "normal";
input-enable;
bias-pull-up;
power-source = <0>;
};
};
};
&tlmm{
capsense_sar_gpio_pins: capsense_sar_gpio_pins {
mux {
pins = "gpio36";
function = "gpio";
};
config {
pins = "gpio36";
drive-strength = <2>;
bias-pull-up;
input-enable;
};
};
};
&tlmm {
tlmm_gpio_key {
gpio_key_active: gpio_key_active {
mux {
pins = "gpio33";
function = "gpio";
};
config {
pins = "gpio33";
drive-strength = <2>;
bias-pull-up;
};
};
};
};
&soc {
gpio_keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default &gpio_key_active>;
vol_up {
label = "volume_up";
gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
linux,can-disable;
debounce-interval = <15>;
gpio-key,wakeup;
};
assist_key{
label = "assist_key";
gpios = <&tlmm 33 0x1>;
linux,input-type = <1>;
linux,code = <KEY_SEARCH>;
debounce-interval = <15>;
linux,can-disable;
gpio-key,wakeup;
};
};
};
&sdhc_1 {
vdd-supply = <&L24A>;
qcom,vdd-voltage-level = <2960000 2960000>;
qcom,vdd-current-level = <0 570000>;
vdd-io-supply = <&L11A>;
qcom,vdd-io-always-on;
qcom,vdd-io-lpm-sup;
qcom,vdd-io-voltage-level = <1800000 1800000>;
qcom,vdd-io-current-level = <0 325000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
&sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
&sdc1_rclk_off>;
status = "ok"
};
&sdhc_2 {
vdd-supply = <&L22A>;
qcom,vdd-voltage-level = <2960000 2960000>;
qcom,vdd-current-level = <0 800000>;
vdd-io-supply = <&L5A>;
qcom,vdd-io-voltage-level = <1800000 2960000>;
qcom,vdd-io-current-level = <0 22000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
status = "ok"
};
&ufsphy_mem {
compatible = "qcom,ufs-phy-qmp-v3-660";
vdda-phy-supply = <&L4A>; /* 0.9v */
vdda-pll-supply = <&L12A>; /* 1.8v */
vdda-phy-max-microamp = <51400>;
vdda-pll-max-microamp = <14200>;
status = "ok"
};
&ufshc_mem {
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
vdd-hba-fixed-regulator;
vcc-supply = <&L24A>;
vcc-voltage-level = <2950000 2960000>;
vccq2-supply = <&L11A>;
vcc-max-microamp = <600000>;
vccq2-max-microamp = <600000>;
qcom,vddp-ref-clk-supply = <&L18A>;
qcom,vddp-ref-clk-max-microamp = <100>;
qcom,vddp-ref-clk-min-uV = <1232000>;
qcom,vddp-ref-clk-max-uV = <1232000>;
status = "ok"
};
&soc {
qcom,tz_gpio {
compatible = "qcom,tz_gpio";
tlmm-tz = <14>,
<15>,
<16>,
<17>;
};
};
&L21A {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3600000>;
qcom,init-voltage = <2800000>;
};
&pm6125_l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
qcom,init-voltage = <1800000>;
};
&pm6125_l21 {
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3600000>;
qcom,init-voltage = <2400000>;
};
&qupv3_se2_i2c {
status = "ok"
sar_abov: abov_sar@20 {
status = "ok"
compatible = "abov,abov_sar_mmi_overlay";
reg = <0x20>;
cap_vdd-supply = <&pm6125_l21>;
cap_svdd-supply =<&pm6125_l9>;
interrupt-parent = <&tlmm>;
interrupts = <36 0x2>;
gpios = <&tlmm 36 0x2>;
pinctrl-names = "default";
pinctrl-0 = <&capsense_sar_gpio_pins>;
reg_array_len = <0x03>;
reg_array_val = <0x07 0x00 0x08 0x1F 0xFB 0x01>;
cap,use_channel_ch0 = <0x00>;
cap,use_channel_ch1 = <0x01>;
cap,use_channel_ch2 = <0x02>;
ch0_name = "capsense_bottom_right";
ch1_name = "capsense_bottom_left";
ch2_name = "capsense_top";
label = "AbovCapSense";
cap,channel_number = <0x03>;
};
};
&qupv3_se1_i2c {
status = "ok"
#address-cells = <1>;
#size-cells = <0>;
nq@28 {
compatible = "qcom,nq-nci";
reg = <0x28>;
qcom,nq-irq = <&tlmm 70 0x00>;
qcom,nq-ven = <&tlmm 69 0x00>;
qcom,nq-firm = <&tlmm 31 0x00>;
qcom,nq-clkreq = <&tlmm 86 0x00>;
interrupt-parent = <&tlmm>;
interrupts = <70 0>;
interrupt-names = "nfc_irq";
pinctrl-names = "nfc_active", "nfc_suspend";
pinctrl-0 = <&nfc_int_active &nfc_enable_active
&nfc_clk_req_active>;
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
&nfc_clk_req_suspend>;
};
};
&soc{
mtp_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
df-serialnum = "SB18C77591";
#include "qg-batterydata-atl-4850mah.dtsi"
};
};
&pmi632_qg {
qcom,qg-iterm-ma = <350>;
qcom,vbatt-cutoff-mv = <3200>;
qcom,vbatt-empty-mv = <3000>;
qcom,vbatt-low-mv = <3300>;
qcom,vbatt-low-cold-mv = <3500>;
qcom,battery-data = <&mtp_batterydata>;
qcom,rbat-conn-mohm = <10>;
qcom,cl-feedback-on;
qcom,cl-min-start-soc = <0>;
qcom,cl-max-start-soc = <5>;
qcom,cl-min-temp = <150>;
qcom,cl-max-temp = <450>;
qcom,cl-max-increment = <5>;
qcom,cl-max-decrement = <10>;
qcom,cl-min-limit = <200>;
qcom,cl-max-limit = <30>;
qcom,s3-entry-ibat-ua = <15000>;
qcom,s3-exit-ibat-ua = <35000>;
qcom,vbatt-empty-cold-mv = <3000>;
qcom,ignore-shutdown-soc-secs = <1800>;
qcom.hold-soc-while-full;
qcom,linearize-soc;
};
&pmi632_charger {
qcom,iterm-ma = <290>;
qcom,fcc-max-ua = <4000000>;
qcom,fv-max-uv = <4450000>;
qcom,usb-icl-ua = <3000000>;
qcom,thermal-mitigation = <3000>,
<2500>,
<2000>,
<1500>,
<1200>,
<900>,
<600>,
<300>;
qcom,battery-data = <&mtp_batterydata>;
qcom,mmi-temp-zones = <0 4200 1164 0>,
<10 4200 3000 1164>,
<15 0 3000 3000>,
<45 0 4000 4000>,
<60 4200 3000 0>;
qcom,enable-charging-limit;
qcom,upper-limit-capacity = <70>;
qcom,lower-limit-capacity = <60>;
qcom,otg-cl-ua = <1000000>;
qcom,dc-unsupported;
qcom,wireless-unsupported;
qcom,usbeb-unsupported;
qcom,disable-suspend-on-collapse;
dpdm-supply = <&qusb_phy0>;
qcom,auto-recharge-soc = <99>;
};
&pmi632_rgb {
red {
label = "charging";
};
};
&spmi_bus {
qcom,pm6125@0 {
qpnp-power-on-mmi@800 {
compatible = "qcom,qpnp-power-on-mmi";
interrupts = <0x0 0x8 0x3 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "kpdpwr-bark";
};
};
};
Reference in new issue View Git Blame Copy Permalink