android_kernel_motorola_sm6225/qcom/khaje-qrd-pm7250b.dtsi

#include "khaje-pm7250b.dtsi"
#include "khaje-thermal-pm7250b-overlay.dtsi"

&sde_dsi {
	pinctrl-0 = <&sde_dsi_active &sde_te_active &disp_lcd_bias_en_default>;
};

&dsi_td4330_truly_v2_video {
	qcom,platform-en-gpio = <&pm7250b_gpios 5 0>;
	qcom,platform-bklight-en-gpio = <&pm7250b_gpios 1 0>;
};

&dsi_td4330_truly_v2_cmd {
	qcom,platform-en-gpio = <&pm7250b_gpios 5 0>;
	qcom,platform-bklight-en-gpio = <&pm7250b_gpios 1 0>;
};

&soc {
	qrd_batterydata: qcom,battery-data {
		qcom,batt-id-range-pct = <15>;
		#include "qg-batterydata-atl466271_3300mAh.dtsi"
	};
};

&tlmm {
	smb_int_default: smb_int_default {
		mux {
			pins = "gpio105";
			function = "gpio";
		};

		config {
			pins = "gpio105";
			bias-pull-up;
			input-enable;
		};
	};
};

&qupv3_se1_i2c {
	status = "ok"
	#include "smb1394.dtsi"
};

&smb1394 {
	pinctrl-names = "default";
	pinctrl-0 = <&smb_int_default>;
	interrupt-parent = <&tlmm>;
	interrupt-names = "smb1394";
	interrupts = <105 IRQ_TYPE_LEVEL_LOW>;
	status = "ok"
};

&smb1394_div2_cp_primary {
	io-channels = <&pm7250b_vadc ADC_AMUX_THM2>;
	io-channel-names = "die_temp";
	qcom,parallel-input-mode = <1>;
	qcom,parallel-output-mode = <2>;
	status = "ok"
};

&pm7250b_vadc {
	smb1390_therm@e {
		qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_SMB1398_TEMP>;
	};
};

&pm7250b_charger {
	status = "ok"
	io-channels = <&pm7250b_vadc ADC_USB_IN_V_16>,
		      <&pm7250b_vadc ADC_USB_IN_I>,
		      <&pm7250b_vadc ADC_CHG_TEMP>,
		      <&pm7250b_vadc ADC_DIE_TEMP>,
		      <&pm7250b_vadc ADC_AMUX_THM3_PU2>,
		      <&pm7250b_vadc ADC_SBUx>,
		      <&pm7250b_vadc ADC_VPH_PWR>,
		      <&pm7250b_vadc ADC_AMUX_THM1_PU2>;
	io-channel-names = "usb_in_voltage",
			   "usb_in_current",
			   "chg_temp",
			   "die_temp",
			   "conn_temp",
			   "sbux_res",
			   "vph_voltage",
			   "skin_temp";
	qcom,battery-data = <&qrd_batterydata>;
	qcom,sec-charger-config = <1>;
	qcom,auto-recharge-soc = <98>;
	qcom,step-charging-enable;
	qcom,sw-jeita-enable;
	qcom,charger-temp-max = <800>;
	qcom,smb-temp-max = <800>;
	qcom,suspend-input-on-debug-batt;
	qcom,fcc-stepping-enable;
	qcom,fcc-step-delay-ms = <100>;
	qcom,fcc-step-size-ua = <100000>;
	qcom,smb-internal-pull-kohm = <0>;
	qcom,thermal-mitigation = <8000000 7500000 7000000 6500000 6000000 5500000
			5000000 4500000 4000000 3500000 3000000 2500000 2000000 1500000
			1000000 500000>;
};

&pm7250b_qg {
	status = "ok"
	io-channels = <&pm7250b_vadc ADC_BAT_THERM_PU2>,
		      <&pm7250b_vadc ADC_BAT_ID_PU2>;
	io-channel-names = "batt-therm",
			   "batt-id";
	qcom,qg-iterm-ma = <150>;
	qcom,hold-soc-while-full;
	qcom,linearize-soc;
	qcom,cl-feedback-on;
	qcom,tcss-enable;
	qcom,fvss-enable;
	qcom,fvss-vbatt-mv = <3500>;
	qcom,bass-enable;
	qcom,vbatt-cutoff-mv = <3400>;
	qcom,vbatt-low-mv = <3500>;
	qcom,vbatt-low-cold-mv = <3800>;
	qcom,vbatt-empty-mv = <3200>;
	qcom,vbatt-empty-cold-mv = <3100>;
	qcom,use-cp-iin-sns;
};

&cam_res_mgr_label {
	gpios = <&pm7250b_gpios 4 0>;
};

&led_flash_rear {
	gpios = <&pm7250b_gpios 4 0>;
};

&led_flash_rear_aux {
	gpios = <&pm7250b_gpios 4 0>;
};

&led_flash_rear_aux2 {
	gpios = <&pm7250b_gpios 4 0>;
};

&pm7250b_charger {
	dpdm-supply = <&usb2_phy0>;

	smb5_vbus: qcom,smb5-vbus {
		regulator-name = "smb5-vbus";
	};

	smb5_vconn: qcom,smb5-vconn {
		regulator-name = "smb5-vconn";
	};
};

&pm7250b_pdphy {
	vdd-pdphy-supply = <&L15A>;
	vbus-supply = <&smb5_vbus>;
	vconn-supply = <&smb5_vconn>;
};

&usb0 {
	extcon = <&pm7250b_pdphy>, <&pm7250b_charger>, <&eud>;
};

&thermal_zones {
	quiet-thermal-step {
		cooling-maps {
			quiet_batt_cdev1 {
				trip = <&quiet_batt_trip0>;
				cooling-device = <&pm7250b_charger 8 8>;
			};

			quiet_batt_cdev2 {
				trip = <&quiet_batt_trip1>;
				cooling-device = <&pm7250b_charger 12 12>;
			};

			quiet_batt_cdev3 {
				trip = <&quiet_batt_trip2>;
				cooling-device = <&pm7250b_charger 14 14>;
			};

			quiet_batt_cdev4 {
				trip = <&quiet_batt_trip3>;
				cooling-device = <&pm7250b_charger 16 16>;
			};

			quiet_batt_cdev5 {
				trip = <&quiet_batt_trip4>;
				cooling-device = <&pm7250b_charger 18 18>;
			};
		};
	};
};