duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
849ec50b61e3082dcd342957f75b68df9458205f
android_kernel_motorola_sm6225/qcom/dsi-panel-mot-tianma-nt37701-655-1080x2400-dsc-cmd-common-v2.dtsi
T
huaqin79 050b21b3a9 arm/dts: display: add panel dtsi for rhode 
add panel dtsi for rhode:
1.tianma nt37701 6.55 inch v2 panel
2.csot nt37701 6.55 inch v1 id

Change-Id: I8aa8f2beaf7319104799e521b91fb50f2db66c1a
Signed-off-by: huaqin79 <huaqin79@motorola.com>
Reviewed-on: https://gerrit.mot.com/2151815
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
2023-05-31 17:01:04 -03:00

316 lines
11 KiB
Devicetree
Raw Blame History

/* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&mdss_mdp {
mot_tm_nt37701_655_1080x2400_dsc_cmd_v2: qcom,mdss_dsi_mot_tm_nt37701_655_1080x2400_dsc_cmd_v2 {
compatible = "qcom,mdss-dsi-panel";
qcom,mdss-dsi-panel-name = "mipi_mot_cmd_tm_1080p_dsc_655";
qcom,mdss-dsi-panel-supplier = "tianma";
qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
qcom,mdss-dsi-virtual-channel-id = <0>;
qcom,mdss-dsi-stream = <0>;
qcom,mdss-pan-physical-width-dimension = <68>;
qcom,mdss-pan-physical-height-dimension = <152>;
qcom,mdss-dsi-bpp = <30>;
qcom,mdss-dsi-underflow-color = <0xff>;
qcom,mdss-dsi-border-color = <0>;
qcom,mdss-dsi-panel-param-verision = <121201>;
qcom,mdss-dsi-panel-param-num = <5>;
qcom,dsi-ctrl-num = <0>;
qcom,dsi-phy-num = <0>;
qcom,mdss-dsi-traffic-mode = "burst_mode";
qcom,mdss-dsi-bllp-eof-power-mode;
qcom,mdss-dsi-bllp-power-mode;
qcom,mdss-dsi-lane-0-state;
qcom,mdss-dsi-lane-1-state;
qcom,mdss-dsi-lane-2-state;
qcom,mdss-dsi-lane-3-state;
qcom,mdss-dsi-dma-trigger = "trigger_sw";
qcom,mdss-dsi-mdp-trigger = "none";
qcom,mdss-dsi-reset-sequence = <0 11>, <1 1>, <0 1>, <1 11>;
qcom,mdss-dsi-lp11-init;
qcom,mdss-dsi-tx-eot-append;
qcom,mdss-dsi-te-pin-select = <1>;
qcom,mdss-dsi-te-dcs-command = <1>;
qcom,mdss-dsi-te-using-te-pin;
qcom,bklt-dcs-2bytes-enabled;
qcom,mdss-dsi-bl-min-level = <3>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
/*qcom,mdss-dsi-panel-hdr-enabled;
qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
17000 15500 30000 8000 3000>;
qcom,mdss-dsi-panel-peak-brightness = <4200000>;
qcom,mdss-dsi-panel-blackness-level = <3230>;*/
qcom,mdss-dsi-hbm-on-command = [
39 01 00 00 00 00 03 51 0F FF];
qcom,mdss-dsi-hbm-off-command = [
39 01 00 00 00 00 03 51 0D BA];
qcom,mdss-dsi-hbm-fod;
qcom,mdss-dsi-hbm-fod-on-command = [
39 01 00 00 00 00 03 51 0F FF];
//qcom,mdss-dsi-acl-on-command = [
// 39 01 00 00 00 00 06 F0 55 AA 52 08 00
// 15 00 00 00 00 00 02 B0 0C
// 15 01 00 00 00 00 02 55 05];
//qcom,mdss-dsi-acl-off-command = [
// 15 01 00 00 00 00 02 55 00];
qcom,mdss-dsi-dc-off-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 51
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 07 B2 60 50 36 91 86 91
39 00 00 00 00 00 0D B3 00 08 01 5F 01 5F 02 A4 02 A4 03 BB
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 03 BB 05 2F 05 2F 06 91 06 91 06 92
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 06 92 0A 2F 0A 2F 0D B9 0D B9 0F FF
15 01 00 00 00 00 02 58 00];
qcom,mdss-dsi-dc-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-dc-on-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 81
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 07 B2 00 00 06 91 06 91
39 00 00 00 00 00 0D B3 00 00 00 00 00 00 00 00 00 00 00 00
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 00 00 00 00 00 00 00 00 00 00 00 00
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 06 92 0A 2F 0A 2F 0D B9 0D B9 0F FF
15 01 00 00 00 00 02 58 01];
qcom,mdss-dsi-dc-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-display-timings {
timing@0{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <48>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <16>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <4>;
qcom,mdss-dsi-v-front-porch = <12>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
15 01 00 00 14 00 02 2F 08 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 1C
39 00 00 00 00 00 06 C0 15 0A 38 27 49 //Demura gain
39 00 00 00 00 00 05 3B 00 10 00 20
15 00 00 00 00 00 02 03 01
15 00 00 00 00 00 02 90 01
39 00 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
15 00 00 00 00 00 02 2C 00 //dsc config 10bit
15 00 00 00 00 00 02 5F 00
39 00 00 00 00 00 02 6F 01
39 01 00 00 00 00 05 88 02 1C 08 73 //Local HBM X/Y
39 01 00 00 00 00 03 51 00 00
15 01 00 00 00 00 02 53 20
15 01 00 00 00 00 02 35 00 //te enable
39 01 00 00 00 00 05 2A 00 00 04 37
39 01 00 00 00 00 05 2B 00 00 09 5F
15 01 00 00 00 00 02 2F 08 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
05 01 00 00 78 00 01 11
05 01 00 00 00 00 01 29]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 00 00 01 28 /* display_off */
05 01 00 00 78 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <8>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
timing@1{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <60>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <16>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <4>;
qcom,mdss-dsi-v-front-porch = <12>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
15 01 00 00 10 00 02 2F 03 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 1C
39 00 00 00 00 00 06 C0 15 0A 38 27 49 //Demura gain
39 00 00 00 00 00 05 3B 00 10 00 20
15 00 00 00 00 00 02 03 01
15 00 00 00 00 00 02 90 01
39 00 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
15 00 00 00 00 00 02 2C 00 //dsc config 10bit
15 00 00 00 00 00 02 5F 00
39 00 00 00 00 00 02 6F 01
39 01 00 00 00 00 05 88 02 1C 08 73 //Local HBM X/Y
39 01 00 00 00 00 03 51 00 00
15 01 00 00 00 00 02 53 20
15 01 00 00 00 00 02 35 00 //te enable
39 01 00 00 00 00 05 2A 00 00 04 37
39 01 00 00 00 00 05 2B 00 00 09 5F
15 01 00 00 00 00 02 2F 03 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
05 01 00 00 78 00 01 11
05 01 00 00 00 00 01 29]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 00 00 01 28 /* display_off */
05 01 00 00 78 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <8>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
timing@2{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <90>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <16>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <4>;
qcom,mdss-dsi-v-front-porch = <12>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
15 01 00 00 0b 00 02 2F 07 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 6F 1C
39 00 00 00 00 00 06 C0 15 0A 38 27 49 //Demura gain
39 00 00 00 00 00 05 3B 00 10 00 20
15 00 00 00 00 00 02 03 01
15 00 00 00 00 00 02 90 01
39 00 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
15 00 00 00 00 00 02 2C 00 //dsc config 10bit
15 00 00 00 00 00 02 5F 00
39 00 00 00 00 00 02 6F 01
39 01 00 00 00 00 05 88 02 1C 08 73 //Local HBM X/Y
39 01 00 00 00 00 03 51 00 00
15 01 00 00 00 00 02 53 20
15 01 00 00 00 00 02 35 00 //te enable
39 01 00 00 00 00 05 2A 00 00 04 37
39 01 00 00 00 00 05 2B 00 00 09 5F
15 01 00 00 00 00 02 2F 07 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
05 01 00 00 78 00 01 11
05 01 00 00 00 00 01 29]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 00 00 01 28 /* display_off */
05 01 00 00 78 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <8>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
};
};
};
Reference in new issue View Git Blame Copy Permalink