duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
849ec50b61e3082dcd342957f75b68df9458205f
android_kernel_motorola_sm6225/qcom/discrete_charging_hawao.dtsi
T
tinno18 11cfff2a7f Hawaoii+OLED: The first FG(cw2217) rsense change to 5 m ohm 
change the first FG(cw2217) r_sense to 5 m ohm from 10 m ohm
discrete_charging_hawao.dtsi

Change-Id: I5ef816aa6166067882dffc2cf7d11db066d6a415
Reviewed-on: https://gerrit.mot.com/2156023
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: <tinno18@motorola.com>
Reviewed-by: Qiong Xie <xieq2@motorola.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
2023-05-31 17:01:04 -03:00

351 lines
10 KiB
Devicetree
Raw Blame History

/* Copyright (c) 2021, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/iio/qcom,spmi-vadc.h>
&pm6125_vadc {
gpio6_div3{
reg = <ADC_GPIO3_DIV3>;
label = "gpio3_div3";
qcom,pre-scaling = <1 3>;
};
};
&pm6125_gpios {
gpio6_adc{
gpio6_adc_default:gpio6_adc_default{
pins = "gpio6";
function = "normal";
bias-high-impedance;
};
};
indicator_led {
indicator_led_default: indicator_led_default {
pins = "gpio8";
function = "func1";
output-low;
power-source = <1>;
};
};
};
&soc {
indicator_led {
compatible = "qcom,indicator-pwm-led";
pinctrl-names = "default";
pinctrl-0 = <&indicator_led_default>;
indicator_led {
label = "charging";
led-sources = <0>;
pwms = <&pm6125_pwm 0 1000000>;
linux,default-trigger = "timer";
};
};
};
&spmi_bus {
qcom,pm6125@1 {
#address-cells = <1>;
qcom,pwms@b300 {
status = "ok"
qcom,lut-patterns = <0 0 0 14 28 42 56 70 84 100
100 84 70 56 42 28 14 0 0 0>;
lpg@1 {
qcom,lpg-chan-id = <1>;
qcom,ramp-step-ms = <200>;
qcom,ramp-low-index = <0>;
qcom,ramp-high-index = <19>;
qcom,ramp-pattern-repeat;
qcom,lpg-sdam-base = <0x48>;
};
};
};
};
&tlmm {
sgm4154x_gpio_pins: sgm4154x_gpio_pins {
mux {
pins = "gpio96";
function = "gpio";
};
config {
pins = "gpio96";
drive-strength = <2>;
bias-pull-up;
input-enable;
};
};
};
//bq2589x
&tlmm {
bq2589x_irq: bq2589x_irq {
mux {
pins = "gpio96";
function = "gpio";
};
config {
pins = "gpio96";
drive-strength = <2>;
bias-pull-up;
input-enable;
};
};
};
&qupv3_se1_i2c {
status = "okay";
sgm4154x: sgm4154x@3B {
status = "okay";
compatible = "sgm,sgm41542";
reg = <0x3B>;
pinctrl-names = "default";
pinctrl-0 = <&sgm4154x_gpio_pins &gpio6_adc_default>;
io-channels = <&pm6125_vadc ADC_GPIO3_DIV3>;
io-channel-names = "gpio3_div3";
interrupt-parent = <&tlmm>;
interrupts = <96 0>; //irq num base on hardware design
sgm,irq-gpio = <&tlmm 96 0>; //irq num base on hardware design
sgm,chg-en-gpio = <&tlmm 36 0>; //gpio num base on hardware design 1.MTK parent node name is pio 2.QUALCOMM parent node name is tlmm or other
dpdm-supply = <&usb2_phy0>;
mmi,qc3-support;
/* sw jeita parameter customer defined*/
enable_sw_jeita;
jeita_temp_above_t4_cv = <0>;
jeita_temp_t3_to_t4_cv = <4100000>;
jeita_temp_t2_to_t3_cv = <4350000>;
jeita_temp_t1_to_t2_cv = <4350000>;
jeita_temp_t0_to_t1_cv = <0>;
jeita_temp_below_t0_cv = <0>;
jeita_temp_above_t4_cc_current = <0>;
jeita_temp_t3_to_t4_cc_current = <1000000>;
jeita_temp_t2_to_t3_cc_current = <1250000>;
jeita_temp_t1_to_t2_cc_current = <1000000>;
jeita_temp_below_t0_cc_current = <0>;
temp_t4_thres = <50>;
temp_t4_thres_minus_x_degree = <48>;
temp_t3_thres = <45>;
temp_t3_thres_minus_x_degree = <45>;
temp_t2_thres = <20>;
temp_t2_thres_plus_x_degree = <15>;
temp_t1_thres = <0>;
temp_t1_thres_plus_x_degree = <0>;
temp_t0_thres = <0>;
temp_t0_thres_plus_x_degree = <2>;
temp_neg_10_thres = <0>;
};
bq25890@6A {
status = "okay";
compatible = "ti,bq2589x-1";
reg = <0x6A>;
pinctrl-names = "default";
//pinctrl-0 = <&bq2589x_irq>;
pinctrl-0 = <&bq2589x_irq &gpio6_adc_default>;
io-channels = <&pm6125_vadc ADC_GPIO3_DIV3>;
io-channel-names = "gpio3_div3";
interrupt-parent = <&tlmm>;
interrupts = <96 0>;
bq2589x_irq-gpio = <&tlmm 96 0>;
bq2589x_en-gpio = <&tlmm 36 0>;
dpdm-supply = <&usb2_phy0>;
mmi,qc3-support;
ti,bq2589x,vbus-volt-high-level = <8700>;/* tune adapter to output 9v */
ti,bq2589x,vbus-volt-low-level = <4400>;/* tune adapter to output 5v */
ti,bq2589x,vbat-min-volt-to-tuneup = <3000>;
ti,bq2589x,charge-voltage = <4450>;
ti,bq2589x,charge-current = <3000>;
ti,bq2589x,term-current = <210>;
ti,bq2589x,enable-auto-dpdm;
ti,bq2589x,enable-termination;
ti,bq2589x,enable-ico;
ti,bq2589x,use-absolute-vindpm;
};
};
&qupv3_se0_i2c {
status = "okay";
cw2217@64 {
compatible = "cellwise,cw2217";
reg = <0x64>;
status = "okay";
sense_r_mohm = <5>;
df-serialnum = "SB18D24973";
#include "bat_setting/CW_nd50-atl-5000mah.dtsi"
#include "bat_setting/CW_nd50-jiade-5000mah.dtsi"
};
sm5602@71 {
compatible = "sm,sm5602";
reg = <0x71>;
status = "okay";
//interrupt-parent = <&tlmm>;
//interrupts = <105 2>;
//qcom,irq-gpio = <&tlmm 105 0x0>;
sm,en_temp_ex;
//sm,en_temp_in;
sm,en_batt_det;
//sm,iocv_man_mode;
sm,misc = <0x0800>;
sm,aging_ctrl = <0x0125>;
sm,cycle_cfg = <0x7000>;
sm,rsns = <0>;
sm,fg_irq_set = <0x07FF>;
sm,low_soc1 = <1>;
sm,low_soc2 = <15>;
sm,v_l_alarm = <3400>;
sm,v_h_alarm = <4450>;
sm,battery_table_num = <0>;
sm,param_version = <2>;
sm,t_l_alarm_in = <54>;
sm,t_h_alarm_in = <1>;
sm,t_l_alarm_ex = <0xD3D8>;
sm,t_h_alarm_ex = <0x9245>;
battery_params {
//battery,id = <0>;
//ND50(ATL)
battery0,param_version = <2>;
battery0,max_voltage_uv = <4450000>;
battery0,battery_type = <4450 0x0 0x2633>;
battery0,battery_table0 = <0x1400 0x1C8A 0x1D03 0x1D72 0x1D7E 0x1D87 0x1D91 0x1DAD 0x1DE0 0x1E0C 0x1E3B 0x1E70 0x1EBE 0x1F18 0x1F48 0x1F98 0x1FF1 0x20BB 0x216C 0x21E8 0x2241 0x22EB 0x2337 0x2733>;
battery0,battery_table1 = <0x0 0x85 0x191 0x323 0x3A9 0x4B5 0x6CD 0xAFE 0xF2E 0x146A 0x19A7 0x2181 0x2BFA 0x33D4 0x3672 0x3911 0x3E4D 0x48C6 0x50A0 0x55DC 0x5987 0x60DB 0x6400 0x64E6>;
battery0,battery_table2 = <0x2033 0x181B 0x1516 0x1213 0x1011 0x0F0F 0x0E0F 0x0E0E>;
battery0,alpha = <0x00CC>;
battery0,beta = <0x0025>;
battery0,rs = <0x805F>;
battery0,rs_value = <0x0050 0x010A 0x3800 0x0048>;
battery0,vit_period = <0x325A>;
battery0,volt_cal = <0x8000>;
battery0,mix_value = <0x0003>;
battery0,curr_offset = <0x000>;
battery0,curr_slope = <0x8080>;
battery0,topoff_soc = <7 400>;
battery0,temp_std = <25>;
battery0,temp_offset = <0 11 1 0 8 (-1)>;
battery0,temp_cal = <0 6 1 11 (-1) 0 6 1 9 1>;
battery0,ext_temp_cal = <0 2 1 2 1 0 2 3 2 3>;
battery0,tem_poff = <3450 100>;
battery0,thermal_table = <0x435B 0x3E57 0x3963 0x3486 0x2FC5 0x2B1B 0x2688 0x2200 0x1DA3 0x1932
0x1534 0x1148 0x0D46 0x096E 0x05A0 0x01F4 0xF62D 0xF2BC 0xEF68 0xEC08
0xE8E0 0xE5D2 0xE2DC 0xDFFC 0xDD33 0xDA83 0xD7E5 0xD55E 0xD2EF 0xD092
0xCE4A 0xCC12 0xC9EF 0xC7E3 0xC5E4 0xC3F8 0xC21D 0xC051 0xBE97 0xBCE9
0xBB4D 0xB9C2 0xB840 0xB6CF 0xB569 0xB40F 0xB2C2 0xB17F 0xB049 0xAF1E
0xADFD 0xACE4 0xABD7 0xAAD5 0xA9DD 0xA8EB 0xA805 0xA71E 0xA648 0xA577
0xA4B0 0xA3ED 0xA32F 0xA27D 0xA1CE 0xA124 0xA082 0x9FE7 0x9F50 0x9EBC
0x9E2B 0x9DA3 0x9D20 0x9CA1 0x9C27 0x9BAF 0x9B3B 0x9ACC 0x9A62 0x99FA
0x9996 0x9938 0x98DE 0x9885 0x982E 0x97DA 0x978A 0x973D 0x96F2 0x96AA
0x9665 0x9621 0x95DF 0x959F 0x9561 0x9525 0x94EB 0x94B3 0x947C 0x9447
0x9414>; //NTC value(DEC) table -20~80
//ND50(JIADE)
battery1,param_version = <2>;
battery1,max_voltage_uv = <4450000>;
battery1,battery_type = <4450 0x0 0x25CC>;
battery1,battery_table0 = <0x1400 0x1C97 0x1D09 0x1D75 0x1D8E 0x1D95 0x1D9C 0x1DB6 0x1DF1 0x1E04 0x1E60 0x1E90 0x1ED3 0x1F34 0x1F72 0x1FB7 0x1FE4 0x20AC 0x2157 0x21D1 0x222A 0x22D4 0x231D 0x2733>;
battery1,battery_table1 = <0x0 0x86 0x195 0x32C 0x5D1 0x7EF 0xA0C 0xBA3 0x10ED 0x1393 0x1E28 0x2617 0x2E07 0x35F7 0x389C 0x3B42 0x3DE7 0x487C 0x506C 0x55B6 0x596A 0x60D3 0x6400 0x64E6>;
battery1,battery_table2 = <0x2B41 0x1F23 0x1A1C 0x1517 0x1314 0x1112 0x1011 0x1010>;
battery1,alpha = <0x00CC>;
battery1,beta = <0x0025>;
battery1,rs = <0x805F>;
battery1,rs_value = <0x0050 0x010A 0x3800 0x0048>;
battery1,vit_period = <0x325A>;
battery1,volt_cal = <0x8000>;
battery1,mix_value = <0x0003>;
battery1,curr_offset = <0x000>;
battery1,curr_slope = <0x8080>;
battery1,topoff_soc = <7 400>;
battery1,temp_std = <25>;
battery1,temp_offset = <0 11 1 0 8 (-1)>;
battery1,temp_cal = <0 6 1 11 (-1) 0 6 1 9 1>;
battery1,ext_temp_cal = <0 2 1 2 0 0 2 3 2 3>;
battery1,tem_poff = <3450 100>;
battery1,thermal_table = <0x435B 0x3E57 0x3963 0x3486 0x2FC5 0x2B1B 0x2688 0x2200 0x1DA3 0x1932
0x1534 0x1148 0x0D46 0x096E 0x05A0 0x01F4 0xF62D 0xF2BC 0xEF68 0xEC08
0xE8E0 0xE5D2 0xE2DC 0xDFFC 0xDD33 0xDA83 0xD7E5 0xD55E 0xD2EF 0xD092
0xCE4A 0xCC12 0xC9EF 0xC7E3 0xC5E4 0xC3F8 0xC21D 0xC051 0xBE97 0xBCE9
0xBB4D 0xB9C2 0xB840 0xB6CF 0xB569 0xB40F 0xB2C2 0xB17F 0xB049 0xAF1E
0xADFD 0xACE4 0xABD7 0xAAD5 0xA9DD 0xA8EB 0xA805 0xA71E 0xA648 0xA577
0xA4B0 0xA3ED 0xA32F 0xA27D 0xA1CE 0xA124 0xA082 0x9FE7 0x9F50 0x9EBC
0x9E2B 0x9DA3 0x9D20 0x9CA1 0x9C27 0x9BAF 0x9B3B 0x9ACC 0x9A62 0x99FA
0x9996 0x9938 0x98DE 0x9885 0x982E 0x97DA 0x978A 0x973D 0x96F2 0x96AA
0x9665 0x9621 0x95DF 0x959F 0x9561 0x9525 0x94EB 0x94B3 0x947C 0x9447
0x9414>; //NTC value(DEC) table -20~80
};
};
};
&soc {
mmi_charger: mmi,charger {
status = "ok"
compatible = "mmi,mmi-charger";
mmi,enable-charging-limit;
mmi,upper-limit-capacity = <65>;
mmi,lower-limit-capacity = <60>;
mmi,heartbeat-interval = <100000>;
mmi,dcp-power-max = <10000>;
mmi,hvdcp-power-max = <15000>;
};
mmi_discrete_charger: mmi,discrete-charging {
status = "ok"
compatible = "mmi,mmi-discrete-charger";
#io-channel-cells = <1>;
battery-names = "battery";
supplied-from = "mmi_battery";
mmi,chrg-iterm-ma = <243>;
mmi,fg-iterm-ma = <500>;
mmi,max-fv-mv = <4450>;
mmi,max-fcc-ma = <4000>;
mmi,demo-fv-mv = <4000>;
mmi,otg-cl-ua = <1200000>;
mmi,df-serialnum = "SB18D24973";
mmi,mmi-temp-zones = <0 4200 1000 0>,
<10 4250 2500 1000>,
<15 0 2500 2500>,
<45 0 4000 4000>,
<60 4200 4000 0>;
mmi,thermal-mitigation = <3500000 3000000
2800000 2500000
2000000 1500000
1200000 900000
600000 300000>;
};
};
/*
&usb0 {
extcon = <&eud>,<&mmi_discrete_charger>;
};
*/
Reference in new issue View Git Blame Copy Permalink