duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
849ec50b61e3082dcd342957f75b68df9458205f
android_kernel_motorola_sm6225/qcom/bengal-pinctrl.dtsi
T
dengwei1 9f6f5d1f6b arm64/dts add touch support 
add hiamx tp
support

Change-Id: Ic25c96a8a01316531f470f845bc00ec71c76f708
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1508389
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Lu Lu <lulu2@lenovo.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
2023-05-31 17:00:59 -03:00

1230 lines
22 KiB
Devicetree
Raw Blame History

&soc {
tlmm: pinctrl@400000 {
compatible = "qcom,bengal-pinctrl";
reg = <0x400000 0xc00000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
wakeup-parent = <&wakegpio>;
irqdomain-map = <0 0 &wakegpio 84 0>,
<3 0 &wakegpio 75 0>,
<4 0 &wakegpio 16 0>,
<6 0 &wakegpio 59 0>,
<8 0 &wakegpio 63 0>,
<11 0 &wakegpio 17 0>,
<13 0 &wakegpio 18 0>,
<14 0 &wakegpio 51 0>,
<17 0 &wakegpio 20 0>,
<18 0 &wakegpio 52 0>,
<19 0 &wakegpio 53 0>,
<24 0 &wakegpio 6 0>,
<25 0 &wakegpio 71 0>,
<27 0 &wakegpio 73 0>,
<28 0 &wakegpio 41 0>,
<31 0 &wakegpio 27 0>,
<32 0 &wakegpio 54 0>,
<33 0 &wakegpio 55 0>,
<34 0 &wakegpio 56 0>,
<35 0 &wakegpio 57 0>,
<36 0 &wakegpio 58 0>,
<39 0 &wakegpio 28 0>,
<46 0 &wakegpio 29 0>,
<62 0 &wakegpio 60 0>,
<63 0 &wakegpio 61 0>,
<64 0 &wakegpio 62 0>,
<65 0 &wakegpio 30 0>,
<66 0 &wakegpio 31 0>,
<67 0 &wakegpio 32 0>,
<69 0 &wakegpio 33 0>,
<70 0 &wakegpio 34 0>,
<72 0 &wakegpio 72 0>,
<75 0 &wakegpio 35 0>,
<79 0 &wakegpio 36 0>,
<80 0 &wakegpio 21 0>,
<81 0 &wakegpio 38 0>,
<83 0 &wakegpio 9 0>,
<84 0 &wakegpio 39 0>,
<85 0 &wakegpio 40 0>,
<86 0 &wakegpio 19 0>,
<87 0 &wakegpio 42 0>,
<88 0 &wakegpio 43 0>,
<89 0 &wakegpio 45 0>,
<91 0 &wakegpio 74 0>,
<93 0 &wakegpio 46 0>,
<94 0 &wakegpio 47 0>,
<95 0 &wakegpio 48 0>,
<96 0 &wakegpio 49 0>,
<97 0 &wakegpio 50 0>,
<99 0 &wakegpio 64 0>, /* LPI_GPIO 7 */
<102 0 &wakegpio 65 0>, /* LPI_GPIO 10 */
<103 0 &wakegpio 66 0>, /* LPI_GPIO 11 */
<104 0 &wakegpio 67 0>, /* LPI_GPIO 12 */
<105 0 &wakegpio 69 0>, /* LPI_GPIO 17 */
<106 0 &wakegpio 14 0>, /* LPI_GPIO 16 */
<107 0 &wakegpio 7 0>, /* LPI_GPIO 17 */
<109 0 &wakegpio 37 0>, /* LPI_GPIO 19 */
<112 0 &wakegpio 25 0>; /* LPI_GPIO 24 */
irqdomain-map-pass-thru = <0 0xff>;
irqdomain-map-mask = <0xff 0>;
ufs_dev_reset_assert: ufs_dev_reset_assert {
config {
pins = "ufs_reset";
bias-pull-down; /* default: pull down */
/*
* UFS_RESET driver strengths are having
* different values/steps compared to typical
* GPIO drive strengths.
*
* Following table clarifies:
*
* HDRV value | UFS_RESET | Typical GPIO
* (dec) | (mA) | (mA)
* 0 | 0.8 | 2
* 1 | 1.55 | 4
* 2 | 2.35 | 6
* 3 | 3.1 | 8
* 4 | 3.9 | 10
* 5 | 4.65 | 12
* 6 | 5.4 | 14
* 7 | 6.15 | 16
*
* POR value for UFS_RESET HDRV is 3 which means
* 3.1mA and we want to use that. Hence just
* specify 8mA to "drive-strength" binding and
* that should result into writing 3 to HDRV
* field.
*/
drive-strength = <8>; /* default: 3.1 mA */
output-low; /* active low reset */
};
};
ufs_dev_reset_deassert: ufs_dev_reset_deassert {
config {
pins = "ufs_reset";
bias-pull-down; /* default: pull down */
/*
* default: 3.1 mA
* check comments under ufs_dev_reset_assert
*/
drive-strength = <8>;
output-high; /* active low reset */
};
};
/* SDC pin type */
sdc1_clk_on: sdc1_clk_on {
config {
pins = "sdc1_clk";
bias-disable; /* NO pull */
drive-strength = <16>; /* 16 MA */
};
};
sdc1_clk_off: sdc1_clk_off {
config {
pins = "sdc1_clk";
bias-disable; /* NO pull */
drive-strength = <2>; /* 2 MA */
};
};
sdc1_cmd_on: sdc1_cmd_on {
config {
pins = "sdc1_cmd";
bias-pull-up; /* pull up */
drive-strength = <10>; /* 10 MA */
};
};
sdc1_cmd_off: sdc1_cmd_off {
config {
pins = "sdc1_cmd";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
sdc1_data_on: sdc1_data_on {
config {
pins = "sdc1_data";
bias-pull-up; /* pull up */
drive-strength = <10>; /* 10 MA */
};
};
sdc1_data_off: sdc1_data_off {
config {
pins = "sdc1_data";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
sdc1_rclk_on: sdc1_rclk_on {
config {
pins = "sdc1_rclk";
bias-pull-down; /* pull down */
};
};
sdc1_rclk_off: sdc1_rclk_off {
config {
pins = "sdc1_rclk";
bias-pull-down; /* pull down */
};
};
sdc2_clk_on: sdc2_clk_on {
config {
pins = "sdc2_clk";
bias-disable; /* NO pull */
drive-strength = <16>; /* 16 MA */
};
};
sdc2_clk_off: sdc2_clk_off {
config {
pins = "sdc2_clk";
bias-disable; /* NO pull */
drive-strength = <2>; /* 2 MA */
};
};
sdc2_cmd_on: sdc2_cmd_on {
config {
pins = "sdc2_cmd";
bias-pull-up; /* pull up */
drive-strength = <10>; /* 10 MA */
};
};
sdc2_cmd_off: sdc2_cmd_off {
config {
pins = "sdc2_cmd";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
sdc2_data_on: sdc2_data_on {
config {
pins = "sdc2_data";
bias-pull-up; /* pull up */
drive-strength = <10>; /* 10 MA */
};
};
sdc2_data_off: sdc2_data_off {
config {
pins = "sdc2_data";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
sdc2_cd_on: cd_on {
mux {
pins = "gpio88";
function = "gpio";
};
config {
pins = "gpio88";
drive-strength = <2>;
bias-pull-up;
};
};
sdc2_cd_off: cd_off {
mux {
pins = "gpio88";
function = "gpio";
};
config {
pins = "gpio88";
drive-strength = <2>;
bias-disable;
};
};
tb_trig1_on: tb_trig1_on {
mux {
pins = "gpio19";
function = "SDC1_TB";
};
config {
pins = "gpio19";
bias-pull-up; /* PULL UP */
drive-strength = <8>; /* 8 MA */
input-enable;
};
};
/* WSA speaker reset pin1 */
spkr_1_sd_n {
spkr_1_sd_n_sleep: spkr_1_sd_n_sleep {
mux {
pins = "gpio106";
function = "gpio";
};
config {
pins = "gpio106";
drive-strength = <2>; /* 2 mA */
bias-pull-down;
input-enable;
};
};
spkr_1_sd_n_active: spkr_1_sd_n_active {
mux {
pins = "gpio106";
function = "gpio";
};
config {
pins = "gpio106";
drive-strength = <16>; /* 16 mA */
bias-disable;
output-high;
};
};
};
wcd937x_reset_active: wcd937x_reset_active {
mux {
pins = "gpio92";
function = "gpio";
};
config {
pins = "gpio92";
drive-strength = <16>;
output-high;
};
};
wcd937x_reset_sleep: wcd937x_reset_sleep {
mux {
pins = "gpio92";
function = "gpio";
};
config {
pins = "gpio92";
drive-strength = <16>;
bias-disable;
output-low;
};
};
qupv3_se4_2uart_pins: qupv3_se4_2uart_pins {
qupv3_se4_2uart_active: qupv3_se4_2uart_active {
mux {
pins = "gpio12", "gpio13";
function = "qup4";
};
config {
pins = "gpio12", "gpio13";
drive-strength = <2>;
bias-disable;
};
};
qupv3_se4_2uart_sleep: qupv3_se4_2uart_sleep {
mux {
pins = "gpio12", "gpio13";
function = "gpio";
};
config {
pins = "gpio12", "gpio13";
drive-strength = <2>;
bias-pull-down;
};
};
};
qupv3_se3_4uart_pins: qupv3_se3_4uart_pins {
qupv3_se3_default_ctsrtsrx:
qupv3_se3_default_ctsrtsrx {
mux {
pins = "gpio8", "gpio9", "gpio11";
function = "gpio";
};
config {
pins = "gpio8", "gpio9", "gpio11";
drive-strength = <2>;
bias-pull-down;
};
};
qupv3_se3_default_tx:
qupv3_se3_default_tx {
mux {
pins = "gpio10";
function = "gpio";
};
config {
pins = "gpio10";
drive-strength = <2>;
bias-pull-up;
};
};
qupv3_se3_ctsrx: qupv3_se3_ctsrx {
mux {
pins = "gpio8", "gpio11";
function = "qup3";
};
config {
pins = "gpio8", "gpio11";
drive-strength = <2>;
bias-disable;
};
};
qupv3_se3_rts: qupv3_se3_rts {
mux {
pins = "gpio9";
function = "qup3";
};
config {
pins = "gpio9";
drive-strength = <2>;
bias-pull-down;
};
};
qupv3_se3_tx: qupv3_se3_tx {
mux {
pins = "gpio10";
function = "qup3";
};
config {
pins = "gpio10";
drive-strength = <2>;
bias-pull-up;
};
};
};
qupv3_se0_i2c_pins: qupv3_se0_i2c_pins {
qupv3_se0_i2c_active: qupv3_se0_i2c_active {
mux {
pins = "gpio0", "gpio1";
function = "qup0";
};
config {
pins = "gpio0", "gpio1";
drive-strength = <2>;
bias-disable;
};
};
qupv3_se0_i2c_sleep: qupv3_se0_i2c_sleep {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
};
config {
pins = "gpio0", "gpio1";
drive-strength = <2>;
bias-pull-up;
};
};
};
qupv3_se1_i2c_pins: qupv3_se1_i2c_pins {
qupv3_se1_i2c_active: qupv3_se1_i2c_active {
mux {
pins = "gpio4", "gpio5";
function = "qup1";
};
config {
pins = "gpio4", "gpio5";
drive-strength = <2>;
bias-disable;
};
};
qupv3_se1_i2c_sleep: qupv3_se1_i2c_sleep {
mux {
pins = "gpio4", "gpio5";
function = "gpio";
};
config {
pins = "gpio4", "gpio5";
drive-strength = <2>;
bias-pull-up;
};
};
};
nfc {
nfc_int_active: nfc_int_active {
/* active state */
mux {
/* GPIO 70 NFC Read Interrupt */
pins = "gpio70";
function = "gpio";
};
config {
pins = "gpio70";
drive-strength = <2>; /* 2 MA */
bias-pull-up;
};
};
nfc_int_suspend: nfc_int_suspend {
/* sleep state */
mux {
/* GPIO 70 NFC Read Interrupt */
pins = "gpio70";
function = "gpio";
};
config {
pins = "gpio70";
drive-strength = <2>; /* 2 MA */
bias-pull-up;
};
};
nfc_enable_active: nfc_enable_active {
/* active state */
mux {
/* 69: Enable 31: Firmware */
pins = "gpio69", "gpio31";
function = "gpio";
};
config {
pins = "gpio69", "gpio31";
drive-strength = <2>; /* 2 MA */
bias-pull-up;
};
};
nfc_enable_suspend: nfc_enable_suspend {
/* sleep state */
mux {
/* 69: Enable 31: Firmware */
pins = "gpio69", "gpio31";
function = "gpio";
};
config {
pins = "gpio69", "gpio31";
drive-strength = <2>; /* 2 MA */
bias-disable;
};
};
nfc_clk_req_active: nfc_clk_req_active {
/* active state */
mux {
/* GPIO 86: NFC CLOCK REQUEST */
pins = "gpio86";
function = "gpio";
};
config {
pins = "gpio86";
drive-strength = <2>; /* 2 MA */
bias-pull-up;
};
};
nfc_clk_req_suspend: nfc_clk_req_suspend {
/* sleep state */
mux {
/* GPIO 86: NFC CLOCK REQUEST */
pins = "gpio86";
function = "gpio";
};
config {
pins = "gpio86";
drive-strength = <2>; /* 2 MA */
bias-disable;
};
};
};
qupv3_se2_i2c_pins: qupv3_se2_i2c_pins {
qupv3_se2_i2c_active: qupv3_se2_i2c_active {
mux {
pins = "gpio6", "gpio7";
function = "qup2";
};
config {
pins = "gpio6", "gpio7";
drive-strength = <2>;
bias-disable;
};
};
qupv3_se2_i2c_sleep: qupv3_se2_i2c_sleep {
mux {
pins = "gpio6", "gpio7";
function = "gpio";
};
config {
pins = "gpio6", "gpio7";
drive-strength = <2>;
bias-pull-up;
};
};
};
qupv3_se0_spi_pins: qupv3_se0_spi_pins {
qupv3_se0_spi_active: qupv3_se0_spi_active {
mux {
pins = "gpio0", "gpio1",
"gpio2", "gpio3";
function = "qup0";
};
config {
pins = "gpio0", "gpio1",
"gpio2", "gpio3";
drive-strength = <6>;
bias-disable;
};
};
qupv3_se0_spi_sleep: qupv3_se0_spi_sleep {
mux {
pins = "gpio0", "gpio1",
"gpio2", "gpio3";
function = "gpio";
};
config {
pins = "gpio0", "gpio1",
"gpio2", "gpio3";
drive-strength = <6>;
bias-disable;
};
};
};
qupv3_se1_spi_pins: qupv3_se1_spi_pins {
qupv3_se1_spi_active: qupv3_se1_spi_active {
mux {
pins = "gpio4", "gpio5",
"gpio69", "gpio70";
function = "qup1";
};
config {
pins = "gpio4", "gpio5",
"gpio69", "gpio70";
drive-strength = <6>;
bias-disable;
};
};
qupv3_se1_spi_sleep: qupv3_se1_spi_sleep {
mux {
pins = "gpio4", "gpio5",
"gpio69", "gpio70";
function = "gpio";
};
config {
pins = "gpio4", "gpio5",
"gpio69", "gpio70";
drive-strength = <6>;
bias-disable;
};
};
};
qupv3_se2_spi_pins: qupv3_se2_spi_pins {
qupv3_se2_spi_active: qupv3_se2_spi_active {
mux {
pins = "gpio6", "gpio7",
"gpio71", "gpio80";
function = "qup2";
};
config {
pins = "gpio6", "gpio7",
"gpio71", "gpio80";
drive-strength = <6>;
bias-disable;
};
};
qupv3_se2_spi_sleep: qupv3_se2_spi_sleep {
mux {
pins = "gpio6", "gpio7",
"gpio71", "gpio80";
function = "gpio";
};
config {
pins = "gpio6", "gpio7",
"gpio71", "gpio80";
drive-strength = <6>;
bias-disable;
};
};
};
qupv3_se5_spi_pins: qupv3_se5_spi_pins {
qupv3_se5_spi_active: qupv3_se5_spi_active {
mux {
pins = "gpio14", "gpio15",
"gpio16", "gpio17";
function = "qup5";
};
config {
pins = "gpio14", "gpio15",
"gpio16", "gpio17";
drive-strength = <6>;
bias-disable;
};
};
qupv3_se5_spi_sleep: qupv3_se5_spi_sleep {
mux {
pins = "gpio14", "gpio15",
"gpio16", "gpio17";
function = "gpio";
};
config {
pins = "gpio14", "gpio15",
"gpio16", "gpio17";
drive-strength = <6>;
bias-disable;
};
};
};
cci0_suspend: cci0_suspend {
mux {
/* CLK, DATA*/
pins = "gpio23", "gpio22";
function = "cci_i2c";
};
config {
pins = "gpio23", "gpio22";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
};
};
cci0_active: cci0_active {
mux {
/* CLK, DATA*/
pins = "gpio23", "gpio22";
function = "cci_i2c";
};
config {
pins = "gpio23", "gpio22";
bias-pull-up; /* PULL UP*/
drive-strength = <2>; /* 2 MA */
};
};
cci1_suspend: cci1_suspend {
mux {
/* CLK, DATA*/
pins = "gpio30", "gpio29";
function = "cci_i2c";
};
config {
pins = "gpio30", "gpio29";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
};
};
cci1_active: cci1_active {
mux {
/* CLK, DATA*/
pins = "gpio30", "gpio29";
function = "cci_i2c";
};
config {
pins = "gpio30", "gpio29";
bias-pull-up; /* PULL UP*/
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_mclk0_active: cam_sensor_mclk0_active {
/* MCLK 0*/
mux {
pins = "gpio20";
function = "cam_mclk";
};
config {
pins = "gpio20";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
/* MCLK 0*/
mux {
pins = "gpio20";
function = "cam_mclk";
};
config {
pins = "gpio20";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_mclk1_active: cam_sensor_mclk1_active {
/* MCLK 1*/
mux {
pins = "gpio21";
function = "cam_mclk";
};
config {
pins = "gpio21";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
/* MCLK 1*/
mux {
pins = "gpio21";
function = "cam_mclk";
};
config {
pins = "gpio21";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_mclk2_active: cam_sensor_mclk2_active {
/* MCLK 2*/
mux {
pins = "gpio27";
function = "cam_mclk";
};
config {
pins = "gpio27";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
/* MCLK 2*/
mux {
pins = "gpio27";
function = "cam_mclk";
};
config {
pins = "gpio27";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_mclk3_active: cam_sensor_mclk3_active {
/* MCLK 3*/
mux {
pins = "gpio28";
function = "cam_mclk";
};
config {
pins = "gpio28";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
/* MCLK 3*/
mux {
pins = "gpio28";
function = "cam_mclk";
};
config {
pins = "gpio28";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_rear0_reset_active: cam_sensor_rear0_reset_active {
/* RESET0 */
mux {
pins = "gpio18";
function = "gpio";
};
config {
pins = "gpio18";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_rear0_reset_suspend: cam_sensor_rear0_reset_suspend {
/* RESET0 */
mux {
pins = "gpio18";
function = "gpio";
};
config {
pins = "gpio18";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
output-low;
};
};
cam_sensor_rear1_reset_active: cam_sensor_rear1_reset_active {
/* RESET1 */
mux {
pins = "gpio19";
function = "gpio";
};
config {
pins = "gpio19";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_rear1_reset_suspend: cam_sensor_rear1_reset_suspend {
/* RESET1 */
mux {
pins = "gpio19";
function = "gpio";
};
config {
pins = "gpio19";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
output-low;
};
};
cam_sensor_rear2_reset_active: cam_sensor_rear2_reset_active {
/* RESET2 */
mux {
pins = "gpio65";
function = "gpio";
};
config {
pins = "gpio65";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_rear2_reset_suspend: cam_sensor_rear2_reset_suspend {
/* RESET2 */
mux {
pins = "gpio65";
function = "gpio";
};
config {
pins = "gpio65";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
output-low;
};
};
cam_sensor_front0_reset_active: cam_sensor_front0_reset_active {
/* RESET0 */
mux {
pins = "gpio24";
function = "gpio";
};
config {
pins = "gpio24";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_front0_reset_suspend: cam_sensor_front0_reset_suspend {
/* RESET0 */
mux {
pins = "gpio24";
function = "gpio";
};
config {
pins = "gpio24";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
output-low;
};
};
cam_sensor_csi_mux_oe_active: cam_sensor_csi_mux_oe_active {
/*CSIMUX_OE*/
mux {
pins = "gpio66";
function = "gpio";
};
config {
pins = "gpio66";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_csi_mux_oe_suspend: cam_sensor_csi_mux_oe_suspend {
/* CSIMUX_OE */
mux {
pins = "gpio66";
function = "gpio";
};
config {
pins = "gpio66";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
output-low;
};
};
cam_sensor_csi_mux_sel_active: cam_sensor_csi_mux_sel_active {
/*CSIMUX_SEL*/
mux {
pins = "gpio67";
function = "gpio";
};
config {
pins = "gpio67";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_csi_mux_sel_suspend: cam_sensor_csi_mux_sel_suspend {
/* CSIMUX_SEL */
mux {
pins = "gpio67";
function = "gpio";
};
config {
pins = "gpio67";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
output-low;
};
};
pmx_sde: pmx_sde {
sde_dsi_active: sde_dsi_active {
mux {
pins = "gpio82";
function = "gpio";
};
config {
pins = "gpio82";
drive-strength = <8>;
bias-disable = <0>;
};
};
sde_dsi_suspend: sde_dsi_suspend {
mux {
pins = "gpio82";
function = "gpio";
};
config {
pins = "gpio82";
drive-strength = <2>;
bias-pull-down;
};
};
};
pmx_sde_te {
sde_te_active: sde_te_active {
mux {
pins = "gpio81";
function = "mdp_vsync";
};
config {
pins = "gpio81";
drive-strength = <2>;
bias-pull-down;
};
};
sde_te_suspend: sde_te_suspend {
mux {
pins = "gpio81";
function = "mdp_vsync";
};
config {
pins = "gpio81";
drive-strength = <2>;
bias-pull-down;
};
};
};
pmx_ts_int_active {
ts_int_active: ts_int_active {
mux {
pins = "gpio80";
function = "gpio";
};
config {
pins = "gpio80";
drive-strength = <8>;
bias-pull-up;
};
};
};
pmx_ts_int_suspend {
ts_int_suspend: ts_int_suspend {
mux {
pins = "gpio80";
function = "gpio";
};
config {
pins = "gpio80";
drive-strength = <2>;
bias-pull-down;
};
};
};
pmx_ts_reset_active {
ts_reset_active: ts_reset_active {
mux {
pins = "gpio71";
function = "gpio";
};
config {
pins = "gpio71";
drive-strength = <8>;
bias-pull-up;
};
};
};
pmx_ts_reset_suspend {
ts_reset_suspend: ts_reset_suspend {
mux {
pins = "gpio71";
function = "gpio";
};
config {
pins = "gpio71";
drive-strength = <2>;
bias-pull-down;
};
};
};
pmx_ts_release {
ts_release: ts_release {
mux {
pins = "gpio80", "gpio71";
function = "gpio";
};
config {
pins = "gpio80", "gpio71";
drive-strength = <2>;
bias-pull-down;
};
};
};
pm8008_active: pm8008_active {
mux {
pins = "gpio26";
function = "gpio";
};
config {
pins = "gpio26";
bias-pull-up;
output-high;
drive-strength = <2>;
};
};
pm8008_interrupt: pm8008_interrupt {
mux {
pins = "gpio25";
function = "gpio";
};
config {
pins = "gpio25";
bias-disable;
input-enable;
};
};
};
};
Reference in new issue View Git Blame Copy Permalink