duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
627c2556334e8a5799132aac47db4bdec10826ed
android_kernel_motorola_sm6225/qcom/bengal-capri-common-overlay.dtsi
T
tnlizd 627c255633 sx9338: sar sensor bring up 
capri:
1. add sx9338 sar sensor support

Change-Id: I3663ff9a5d0358b8ef7f89e3b5310d1800b04c7a
Reviewed-on: https://gerrit.mot.com/1759026
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wen Xie <xiewen3@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
2023-05-31 17:01:02 -03:00

428 lines
9.8 KiB
Devicetree
Raw Blame History

/* Copyright (c) 2019, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "bengal-moto-common-overlay.dtsi"
#include "bengal-capri-pinctrl-overlay.dtsi"
#include "bengal-capri-display.dtsi"
#include "bengal-audio-overlay.dtsi"
#include "bengal-capri-awinic-audio-overlay.dtsi"
#include "bengal-capri-touchscreen-overlay.dtsi"
#include "camera/bengal-camera-sensor-mot-capri-overlay.dtsi"
#include "bengal-capri-fps.dtsi"
#include "bengal-capri-moto-thermal.dtsi"
&firmware {
android {
vbmeta {
compatible = "android,vbmeta";
parts = "vbmeta,boot,system,vendor,dtbo";
};
};
};
&qupv3_se4_2uart {
status = "ok"
};
&pm6125_gpios {
key_vol_up {
key_vol_up_default: key_vol_up_default {
pins = "gpio5";
function = "normal";
input-enable;
bias-pull-up;
power-source = <0>;
};
};
};
&qupv3_se1_i2c {
status = "ok"
#address-cells = <1>;
#size-cells = <0>;
nq@28 {
compatible = "qcom,nq-nci";
reg = <0x28>;
qcom,nq-irq = <&tlmm 70 0x00>;
qcom,nq-ven = <&tlmm 2 0x00>;
qcom,nq-firm = <&tlmm 31 0x00>;
qcom,nq-clkreq = <&tlmm 86 0x00>;
interrupt-parent = <&tlmm>;
interrupts = <70 0>;
interrupt-names = "nfc_irq";
pinctrl-names = "nfc_active", "nfc_suspend";
pinctrl-0 = <&nfc_int_active &nfc_enable_active
&nfc_clk_req_active>;
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
&nfc_clk_req_suspend>;
};
};
&tlmm{
tlmm_gpio_key {
gpio_key_active: gpio_key_active {
mux {
pins = "gpio33";
function = "gpio";
};
config {
pins = "gpio33";
drive-strength = <2>;
bias-pull-up;
};
};
};
sar_int_default: sar_int_default {
mux {
pins = "gpio36";
function = "gpio";
};
config {
pins = "gpio36";
num-grp-pins = <1>;
drive-strength = <2>;
bias-pull-up;
};
};
sar_int_sleep: sar_int_sleep {
mux {
pins = "gpio36";
function = "gpio";
};
config {
pins = "gpio36";
num-grp-pins = <1>;
drive-strength = <2>;
bias-pull-up;
};
};
};
&soc {
/delete-node/ qupv3_se0_spi;
gpio_keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default &gpio_key_active>;
vol_up {
label = "volume_up";
gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
linux,can-disable;
debounce-interval = <15>;
gpio-key,wakeup;
};
assist_key{
label = "assist_key";
gpios = <&tlmm 33 0x1>;
linux,input-type = <1>;
linux,code = <KEY_SEARCH>;
debounce-interval = <15>;
linux,can-disable;
gpio-key,wakeup;
};
};
};
&sdhc_1 {
vdd-supply = <&L24A>;
qcom,vdd-voltage-level = <2960000 2960000>;
qcom,vdd-current-level = <0 570000>;
vdd-io-supply = <&L11A>;
qcom,vdd-io-always-on;
qcom,vdd-io-lpm-sup;
qcom,vdd-io-voltage-level = <1800000 1800000>;
qcom,vdd-io-current-level = <0 325000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
&sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
&sdc1_rclk_off>;
status = "ok"
};
&sdhc_2 {
vdd-supply = <&L22A>;
qcom,vdd-voltage-level = <2960000 2960000>;
qcom,vdd-current-level = <0 800000>;
vdd-io-supply = <&L5A>;
qcom,vdd-io-voltage-level = <1800000 2960000>;
qcom,vdd-io-current-level = <0 22000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
status = "ok"
};
&ufsphy_mem {
compatible = "qcom,ufs-phy-qmp-v3-660";
vdda-phy-supply = <&L4A>; /* 0.9v */
vdda-pll-supply = <&L12A>; /* 1.8v */
vdda-phy-max-microamp = <51400>;
vdda-pll-max-microamp = <14200>;
status = "ok"
};
&ufshc_mem {
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
vdd-hba-fixed-regulator;
vcc-supply = <&L24A>;
vcc-voltage-level = <2950000 2960000>;
vccq2-supply = <&L11A>;
vcc-max-microamp = <600000>;
vccq2-max-microamp = <600000>;
qcom,vddp-ref-clk-supply = <&L18A>;
qcom,vddp-ref-clk-max-microamp = <100>;
qcom,vddp-ref-clk-min-uV = <1232000>;
qcom,vddp-ref-clk-max-uV = <1232000>;
status = "ok"
};
&sde_dsi {
qcom,dsi-default-panel = <&dsi_hlt_hx83102d_video>;
};
&qupv3_se0_i2c {
status = "ok"
sx933x@28 { /* SAR sensor */
compatible = "Semtech,sx933x";
reg = <0x28>;
pinctrl-names = "default","sleep";
pinctrl-0 = <&sar_int_default>;
pinctrl-1 = <&sar_int_sleep>;
Semtech,power-supply-type = <1>;
cap_vdd-supply = <&L21A>;
interrupt-parent = <&tlmm>;
interrupts = <36 0x02>;
interrupt-names = "sx933x_irq";
Semtech,nirq-gpio= <&tlmm 36 0x02>;
Semtech,button-flag = <0x07>;
Semtech,headset-reg-num = <4>;
Semtech,headset-reg = <
0x8074 0x08203515
0x802c 0x20000A9D
0x803c 0x20000A9D
0x801c 0x20000014>;
Semtech,reg-num = <83>;
Semtech,reg-init =<
0x4004 0x7C
0x4008 0x00
0x4054 0x400
0x42c0 0x8000000
0x42c4 0x3F
0x800c 0x00
0x8010 0x00
0x8014 0x00
0x8018 0x00
0x801c 0x31
0x8020 0x001F001F
0x8024 0x1466
0x8028 0x3FFE825A
0x802c 0x1476
0x8030 0x3DFF82D0
0x8034 0x1466
0x8038 0x2FFF82C8
0x803c 0x1466
0x8040 0x3FF78022
0x8044 0x1466
0x8048 0x3FBF8022
0x804c 0x148E
0x8050 0x80001EE6
0x8054 0x10224B00
0x8058 0x20630031
0x805C 0x7F605000
0x8060 0x00
0x8064 0x00A70000
0x8068 0x00
0x806C 0x26002600
0x8070 0x00010000
0x8074 0x10224D00
0x8078 0x20630031
0x807c 0x543C5000
0x8080 0x00
0x8084 0x00AD0000
0x8088 0x00
0x808c 0x00
0x8090 0x10000
0x8094 0x10222800
0x8098 0x20630031
0x809c 0x54AC5000
0x80a0 0x00
0x80a4 0x00
0x80a8 0x00
0x80ac 0x00
0x80b0 0x20000
0x80b4 0x10527E00
0x80b8 0x20630031
0x80bc 0x54AC5300
0x80c0 0x00
0x80c4 0x00
0x80c8 0x00
0x80cc 0x00
0x80d0 0x00
0x80d4 0x10527E00
0x80d8 0x20630031
0x80dc 0x54AC5300
0x80e0 0x00
0x80e4 0x00
0x80e8 0x00
0x80ec 0x00
0x80f0 0x00
0x80f4 0x10162800
0x80f8 0x20400031
0x80fc 0x54AC5300
0x8100 0x00
0x8104 0x00
0x8108 0x00
0x810c 0x00
0x8110 0x00
0x8124 0x4000013
0x8128 0x4000004
0x812c 0x00
0x8130 0x00
0x8134 0x00
0x8138 0x00
0x813c 0x00
0x8140 0x00
0x8144 0x00
0x8148 0x00
0x814c 0x00
0x81a4 0x01C40010>;
status = "ok"
};
};
/*
&soc{
mtp_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
df-serialnum = "SB18C77591";
#include "qg-batterydata-jk50-atl-4850mah.dtsi"
#include "qg-batterydata-jk50-scud-4850mah.dtsi"
#include "qg-batterydata-jk50-atl-flex-4850mah.dtsi"
#include "qg-batterydata-jk50-atl-unicoba-4850mah.dtsi"
#include "qg-batterydata-jk50-swd-4850mah.dtsi"
};
};
*/
&pmi632_qg {
//qcom,qg-iterm-ma = <350>;
qcom,vbatt-cutoff-mv = <3200>;
qcom,vbatt-empty-mv = <3000>;
qcom,vbatt-low-mv = <3300>;
qcom,vbatt-low-cold-mv = <3500>;
qcom,battery-data = <&mtp_batterydata>;
qcom,rbat-conn-mohm = <10>;
qcom,cl-feedback-on;
qcom,cl-min-start-soc = <0>;
qcom,cl-max-start-soc = <5>;
qcom,cl-min-temp = <150>;
qcom,cl-max-temp = <450>;
qcom,cl-max-increment = <5>;
qcom,cl-max-decrement = <10>;
qcom,cl-min-limit = <200>;
qcom,cl-max-limit = <30>;
qcom,s3-entry-ibat-ua = <15000>;
qcom,s3-exit-ibat-ua = <35000>;
qcom,vbatt-empty-cold-mv = <3000>;
qcom,ignore-shutdown-soc-secs = <1800>;
qcom.hold-soc-while-full;
qcom,linearize-soc;
};
&pmi632_rgb {
red {
label = "charging";
};
};
&pmi632_charger {
//qcom,iterm-ma = <100>;
//qcom,fcc-max-ua = <2000000>;
//qcom,fv-max-uv = <4400000>;
//qcom,usb-icl-ua = <2000000>;
//qcom,thermal-mitigation = <2000>,
// <1800>,
// <1600>,
// <1300>,
// <1100>,
// <900>,
// <600>,
// <400>;
qcom,battery-data = <&mtp_batterydata>;
//qcom,mmi-temp-zones = <0 4200 1000 0>,
// <10 4200 1000 1000>,
// <15 0 1000 1000>,
// <45 0 2000 2000>,
// <60 4200 2000 0>;
qcom,enable-charging-limit;
qcom,upper-limit-capacity = <75>;
qcom,lower-limit-capacity = <60>;
//qcom,hvdcp-disable;
qcom,otg-cl-ua = <1000000>;
qcom,dc-unsupported;
qcom,wireless-unsupported;
qcom,usbeb-unsupported;
qcom,disable-suspend-on-collapse;
dpdm-supply = <&qusb_phy0>;
qcom,auto-recharge-soc = <99>;
//qcom,support-2a-dcp;
};
&soc {
qcom,tz_gpio {
compatible = "qcom,tz_gpio";
tlmm-tz = <14>,
<15>,
<16>,
<17>;
};
};
&spmi_bus {
qcom,pm6125@0 {
qpnp-power-on-mmi@800 {
compatible = "qcom,qpnp-power-on-mmi";
interrupts = <0x0 0x8 0x3 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "kpdpwr-bark";
};
};
};
Reference in new issue View Git Blame Copy Permalink