duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
576182748af4c62315e856b2db7b9bae1db94a31
android_kernel_motorola_sm6225/qcom/dsi-panel-mot-csot-vtdr6130-655-1080x2400-dsc-cmd-common_v0.dtsi
T
hqjiangy 576182748a display: add panel dtsi for rhode 
add panel dtsi for rhode:
1.csot vtdr6130 6.55 inch v0 panel

Change-Id: I4727bb7212ae99266d837b6fee23bfe7836f51f8
Signed-off-by: hqjiangy <hqjiangy@motorola.com>
Reviewed-on: https://gerrit.mot.com/2280532
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
2023-05-31 17:01:06 -03:00

334 lines
14 KiB
Devicetree
Raw Blame History

/* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&mdss_mdp {
mot_csot_vtdr6130_655_1080x2400_dsc_cmd_v0: qcom,mdss_dsi_mot_csot_vtdr6130_655_1080x2400_dsc_cmd_v0 {
compatible = "qcom,mdss-dsi-panel";
qcom,mdss-dsi-panel-name = "mipi_mot_cmd_csot_1080p_dsc_655";
qcom,mdss-dsi-panel-supplier = "csot";
qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
qcom,mdss-dsi-virtual-channel-id = <0>;
qcom,mdss-dsi-stream = <0>;
qcom,mdss-pan-physical-width-dimension = <68>;
qcom,mdss-pan-physical-height-dimension = <152>;
qcom,mdss-dsi-bpp = <30>;
qcom,mdss-dsi-underflow-color = <0xff>;
qcom,mdss-dsi-border-color = <0>;
qcom,mdss-dsi-panel-param-verision = <121201>;
qcom,mdss-dsi-panel-param-num = <5>;
qcom,dsi-ctrl-num = <0>;
qcom,dsi-phy-num = <0>;
qcom,mdss-dsi-traffic-mode = "burst_mode";
qcom,mdss-dsi-bllp-eof-power-mode;
qcom,mdss-dsi-bllp-power-mode;
qcom,mdss-dsi-lane-0-state;
qcom,mdss-dsi-lane-1-state;
qcom,mdss-dsi-lane-2-state;
qcom,mdss-dsi-lane-3-state;
qcom,mdss-dsi-dma-trigger = "trigger_sw";
qcom,mdss-dsi-mdp-trigger = "none";
qcom,mdss-dsi-reset-sequence = <0 5>, <1 5>, <0 5>, <1 20>;
qcom,mdss-dsi-lp11-init;
qcom,mdss-dsi-tx-eot-append;
qcom,mdss-dsi-te-pin-select = <1>;
qcom,mdss-dsi-te-dcs-command = <1>;
qcom,mdss-dsi-te-using-te-pin;
qcom,bklt-dcs-2bytes-enabled;
qcom,mdss-dsi-bl-min-level = <3>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
/*qcom,mdss-dsi-panel-hdr-enabled;
qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
17000 15500 30000 8000 3000>;
qcom,mdss-dsi-panel-peak-brightness = <4200000>;
qcom,mdss-dsi-panel-blackness-level = <3230>;*/
qcom,mdss-dsi-hbm-on-command = [
39 01 00 00 00 00 03 51 0F FF];
qcom,mdss-dsi-hbm-off-command = [
39 01 00 00 00 00 03 51 0D BA];
qcom,mdss-dsi-hbm-fod;
qcom,mdss-dsi-hbm-fod-on-command = [
39 01 00 00 00 00 03 51 0F FF];
qcom,mdss-dsi-dc-off-command = [
15 00 00 00 00 00 02 62 00
15 00 00 00 00 00 02 6C 01];
qcom,mdss-dsi-dc-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-dc-on-command = [
15 00 00 00 00 00 02 62 00
15 00 00 00 00 00 02 6C 02];
qcom,mdss-dsi-dc-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-display-timings {
timing@0{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <48>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <32>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <20>;
qcom,mdss-dsi-v-front-porch = <1248>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
39 01 00 00 00 00 02 62 00
39 01 00 00 00 00 02 6C 00
39 01 00 00 00 00 02 6D 00
05 01 00 00 00 00 01 39 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 01 00 00 00 00 02 03 01
39 01 00 00 00 00 02 35 00
39 01 00 00 00 00 02 53 20
39 01 00 00 00 00 03 51 00 00
39 01 00 00 00 00 02 59 09
39 01 00 00 00 00 02 62 00
39 01 00 00 00 00 02 6C 00
39 01 00 00 00 00 02 6F 02
39 01 00 00 00 00 5F 70 11 00 00 AB 30 80 09 60 04 38 00 0C 04 38 04 38 02 00 03 1C 00 20 01 7E 00 0F 00 0C 08 BB 04 3D 18 00 10 F0 07 10 20 00 06 0F 0F 33 0E 1C 2A 38 46 54 62 69 70 77 79 7B 7D 7E 02 02 22 00 2A 40 2A BE 3A FC 3A FA 3A F8 3B 38 3B 78 3B B6 4B B6 4B F4 4B F4 6C 34 84 74 00 00 00 00 00 00
39 01 00 00 00 00 03 F0 AA 10
39 01 00 00 00 00 02 B3 C6
39 01 00 00 00 00 03 F0 AA 14
39 01 00 00 00 00 03 B2 03 33
39 01 00 00 00 00 0D B4 00 6C 00 00 00 6C 00 00 00 6C 00 00
39 01 00 00 00 00 0A B5 00 18 18 18 18 18 18 06 01
39 01 00 00 00 00 07 B9 00 00 0A 18 18 18
39 01 00 00 00 00 0C BC 10 00 00 0A 11 18 78 18 78 18 78
39 01 00 00 00 00 0C BE 10 10 00 0A 22 18 48 18 48 18 48
39 01 00 00 00 00 03 FF 5A 80
39 01 00 00 00 00 02 65 13
39 01 00 00 00 00 02 FD 01
39 01 00 00 00 00 03 FF 5A 81
39 01 00 00 00 00 02 65 05
39 01 00 00 00 00 02 F3 0F
39 01 00 00 00 00 03 FF 5A 82
39 01 00 00 00 00 02 F9 00
39 01 00 00 00 00 03 FF 5A 83
39 01 00 00 00 00 02 65 04
39 01 00 00 00 00 02 F8 00
05 01 00 00 00 00 01 39
39 01 00 00 82 00 01 11
39 01 00 00 14 00 01 29
39 01 00 00 00 00 03 F0 AA 10
39 01 00 00 00 00 02 65 03
39 01 00 00 00 00 02 EB 18
39 01 00 00 00 00 03 F0 AA 00
39 01 00 00 00 00 03 FF 5A 00]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 14 00 01 28 /* display_off */
05 01 00 00 78 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <8>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
timing@1{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <60>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <32>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <20>;
qcom,mdss-dsi-v-front-porch = <1248>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
05 01 00 00 00 00 01 38 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
15 01 00 00 00 00 02 62 00
15 01 00 00 00 00 02 6C 01
];
qcom,mdss-dsi-on-command = [
39 01 00 00 00 00 02 03 01
39 01 00 00 00 00 02 35 00
39 01 00 00 00 00 02 53 20
39 01 00 00 00 00 03 51 00 00
39 01 00 00 00 00 02 59 09
39 01 00 00 00 00 02 62 00
39 01 00 00 00 00 02 6C 01
39 01 00 00 00 00 02 6F 02
39 01 00 00 00 00 5F 70 11 00 00 AB 30 80 09 60 04 38 00 0C 04 38 04 38 02 00 03 1C 00 20 01 7E 00 0F 00 0C 08 BB 04 3D 18 00 10 F0 07 10 20 00 06 0F 0F 33 0E 1C 2A 38 46 54 62 69 70 77 79 7B 7D 7E 02 02 22 00 2A 40 2A BE 3A FC 3A FA 3A F8 3B 38 3B 78 3B B6 4B B6 4B F4 4B F4 6C 34 84 74 00 00 00 00 00 00
39 01 00 00 00 00 03 F0 AA 10
39 01 00 00 00 00 02 B3 C6
39 01 00 00 00 00 03 F0 AA 14
39 01 00 00 00 00 03 B2 03 33
39 01 00 00 00 00 0D B4 00 6C 00 00 00 6C 00 00 00 6C 00 00
39 01 00 00 00 00 0A B5 00 18 18 18 18 18 18 06 01
39 01 00 00 00 00 07 B9 00 00 0A 18 18 18
39 01 00 00 00 00 0C BC 10 00 00 0A 11 18 78 18 78 18 78
39 01 00 00 00 00 0C BE 10 10 00 0A 22 18 48 18 48 18 48
39 01 00 00 00 00 03 FF 5A 80
39 01 00 00 00 00 02 65 13
39 01 00 00 00 00 02 FD 01
39 01 00 00 00 00 03 FF 5A 81
39 01 00 00 00 00 02 65 05
39 01 00 00 00 00 02 F3 0F
39 01 00 00 00 00 03 FF 5A 82
39 01 00 00 00 00 02 F9 00
39 01 00 00 00 00 03 FF 5A 83
39 01 00 00 00 00 02 65 04
39 01 00 00 00 00 02 F8 00
39 01 00 00 82 00 01 11
39 01 00 00 14 00 01 29
39 01 00 00 00 00 03 F0 AA 10
39 01 00 00 00 00 02 65 03
39 01 00 00 00 00 02 EB 18
39 01 00 00 00 00 03 F0 AA 00
39 01 00 00 00 00 03 FF 5A 00]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 14 00 01 28 /* display_off */
05 01 00 00 82 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <8>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
timing@2{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <90>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <32>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <20>;
qcom,mdss-dsi-v-front-porch = <24>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
05 01 00 00 00 00 01 38
15 01 00 00 00 00 02 62 00
15 01 00 00 0b 00 02 6C 00 //08:48Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 01 00 00 00 00 02 03 01
39 01 00 00 00 00 02 35 00
39 01 00 00 00 00 02 53 20
39 01 00 00 00 00 03 51 00 00
39 01 00 00 00 00 02 59 09
39 01 00 00 00 00 02 62 00
39 01 00 00 00 00 02 6C 00
39 01 00 00 00 00 02 6F 02
39 01 00 00 00 00 5F 70 11 00 00 AB 30 80 09 60 04 38 00 0C 04 38 04 38 02 00 03 1C 00 20 01 7E 00 0F 00 0C 08 BB 04 3D 18 00 10 F0 07 10 20 00 06 0F 0F 33 0E 1C 2A 38 46 54 62 69 70 77 79 7B 7D 7E 02 02 22 00 2A 40 2A BE 3A FC 3A FA 3A F8 3B 38 3B 78 3B B6 4B B6 4B F4 4B F4 6C 34 84 74 00 00 00 00 00 00
39 01 00 00 00 00 03 F0 AA 10
39 01 00 00 00 00 02 B3 C6
39 01 00 00 00 00 03 F0 AA 14
39 01 00 00 00 00 03 B2 03 33
39 01 00 00 00 00 0D B4 00 6C 00 00 00 6C 00 00 00 6C 00 00
39 01 00 00 00 00 0A B5 00 18 18 18 18 18 18 06 01
39 01 00 00 00 00 07 B9 00 00 0A 18 18 18
39 01 00 00 00 00 0C BC 10 00 00 0A 11 18 78 18 78 18 78
39 01 00 00 00 00 0C BE 10 10 00 0A 22 18 48 18 48 18 48
39 01 00 00 00 00 03 FF 5A 80
39 01 00 00 00 00 02 65 13
39 01 00 00 00 00 02 FD 01
39 01 00 00 00 00 03 FF 5A 81
39 01 00 00 00 00 02 65 05
39 01 00 00 00 00 02 F3 0F
39 01 00 00 00 00 03 FF 5A 82
39 01 00 00 00 00 02 F9 00
39 01 00 00 00 00 03 FF 5A 83
39 01 00 00 00 00 02 65 04
39 01 00 00 00 00 02 F8 00
39 01 00 00 82 00 01 11
39 01 00 00 14 00 01 29
39 01 00 00 00 00 03 F0 AA 10
39 01 00 00 00 00 02 65 03
39 01 00 00 00 00 02 EB 18
39 01 00 00 00 00 03 F0 AA 00
39 01 00 00 00 00 03 FF 5A 00]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 14 00 01 28 /* display_off */
05 01 00 00 82 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <8>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
};
};
};
Reference in new issue View Git Blame Copy Permalink