Files
android_kernel_motorola_sm6225/qcom/bengal-borneo-fps.dtsi
T
chenlj2 44a46d82f1 arm64/dt: modify fps dts config in borneo
Add fps device node to bring up fps.
Use fpc1540 and et528

Change-Id: I2af13791f65d93cf1fe25b5d155f8022cfac79ee
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1582576
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hongshu Lou <louhs1@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
2023-05-31 17:01:00 -03:00

181 lines
3.0 KiB
Devicetree

&tlmm {
ets {
ets_int_active: ets_int_active {
/* INTERRUPT */
mux {
pins = "gpio97";
function = "gpio";
};
config {
pins = "gpio97";
drive-strength = <2>; /* 2 MA */
input-enable;
};
};
ets_int_suspend: ets_int_suspend {
/* INTERRUPT */
mux {
pins = "gpio97";
function = "gpio";
};
config {
pins = "gpio97";
drive-strength = <2>; /* 2 MA */
input-enable;
};
};
};
fpc {
rst_active: fps_rst_active {
/* active state */
mux {
pins = "gpio104";
function = "gpio";
};
config {
pins = "gpio104";
drive-strength = <2>; /* 2 MA */
bias-disable;
output-low;
};
};
rst_suspend: fps_rst_suspend {
/* sleep state */
mux {
pins = "gpio104";
function = "gpio";
};
config {
pins = "gpio104";
drive-strength = <2>; /* 2 MA */
bias-pull-down; /* pull down */
output-high;
};
};
int_active: fps_int_active {
/* active state */
mux {
pins = "gpio97";
function = "gpio";
};
config {
pins = "gpio97";
drive-strength = <2>; /* 2 MA */
bias-pull-down; /* pull down */
input-enable;
};
};
int_suspend: fps_int_suspend {
/* sleep state */
mux {
pins = "gpio97";
function = "gpio";
};
config {
pins = "gpio97";
drive-strength = <2>; /* 2 MA */
bias-pull-down; /* pull down */
input-enable;
};
};
};
fps_ido3_en_active: ldo3_en_active {
/* active state */
mux {
pins = "gpio102";
function = "gpio";
};
config {
pins = "gpio102";
drive-strength = <2>; /* 2 MA */
bias-pull-up;
output-high;
};
};
fps_ido3_en_suspend: ldo3_en_suspend {
/* suspend state */
mux {
pins = "gpio102";
function = "gpio";
};
config {
pins = "gpio102";
drive-strength = <2>; /* 2 MA */
bias-pull-up;
output-high;
};
};
fps_ido1p8_en_active: ldo1p8_en_active {
/* active state */
mux {
pins = "gpio105";
function = "gpio";
};
config {
pins = "gpio105";
drive-strength = <2>; /* 2 MA */
bias-pull-up;
output-high;
};
};
fps_ido1p8_en_suspend: ldo1p8_en_suspend {
/* suspend state */
mux {
pins = "gpio105";
function = "gpio";
};
config {
pins = "gpio105";
drive-strength = <2>; /* 2 MA */
bias-pull-up;
output-high;
};
};
};
&soc {
et528: et528 {
compatible = "egistec,et516";
status = "ok"
reg = <0>;
interrupt-parent = <&tlmm>;
interrupts = <97 0x0>;
egistec,gpio_irq = <&tlmm 97 0x2>;
egistec,gpio_rst = <&tlmm 104 0x2>;
pinctrl-names = "default", "suspend";
pinctrl-0 = <&ets_int_active &fps_ido3_en_active &fps_ido1p8_en_active>;
pinctrl-1 = <&ets_int_suspend &fps_ido3_en_suspend &fps_ido1p8_en_suspend>;
};
fpc: fpc_fpc1020 {
compatible = "fpc,fpc1020";
status = "ok"
irq = <&tlmm 97 0>;
rst = <&tlmm 104 0>;
pinctrl-names = "default", "suspend";
pinctrl-0 = <&rst_active &int_active &fps_ido3_en_active &fps_ido1p8_en_active>;
pinctrl-1 = <&rst_suspend &int_suspend &fps_ido3_en_suspend &fps_ido1p8_en_suspend>;
};
};