duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
3084e333003cecafe18824314855192b2891f234
android_kernel_motorola_sm6225/qcom/kona-xrfusion.dtsi
T
congying 8fa9b27aa1 ARM: dts: qcom: Add second trip to skin-msm-therm-usr for sxr2130 
There are two clients in userspace who can request different
trip thresholds to skin-msm-therm. For fix this issue, add
skin-msm-therm-usr second trip and enable these sensors to wakeup.

Change-Id: I9f7f4f34814986f67bdd423f8a22daa807d238aa
2022-08-25 19:13:38 +08:00

1189 lines
26 KiB
Devicetree
Raw Blame History

#include <dt-bindings/gpio/gpio.h>
#include "kona-pmic-overlay.dtsi"
#include "kona-sde-display.dtsi"
#include "kona-audio-overlay.dtsi"
#include "kona-audio-overlay-ar.dtsi"
#include "kona-thermal-overlay.dtsi"
#include "kona-xr-pinctrl-overlay.dtsi"
#include "camera/kona-camera-sensor-xrfusion.dtsi"
&tlmm {
display_panel_led1_default: display_panel_led1_default {
mux {
pins = "gpio144";
function = "gpio";
};
config {
pins = "gpio144";
drive-strength = <8>;
bias-disable = <0>;
output-high;
};
};
display_panel_led2_default: display_panel_led2_default {
mux {
pins = "gpio140";
function = "gpio";
};
config {
pins = "gpio140";
drive-strength = <8>;
bias-disable = <0>;
output-high;
};
};
spkr_1_sd_n {
spkr_1_sd_n_sleep: spkr_1_sd_n_sleep {
mux {
pins = "gpio127";
function = "gpio";
};
config {
pins = "gpio127";
drive-strength = <2>; /* 2 mA */
bias-pull-down;
input-enable;
};
};
spkr_1_sd_n_active: spkr_1_sd_n_active {
mux {
pins = "gpio127";
function = "gpio";
};
config {
pins = "gpio127";
drive-strength = <16>; /* 16 mA */
bias-disable;
output-high;
};
};
};
spkr_2_sd_n {
spkr_2_sd_n_sleep: spkr_2_sd_n_sleep {
mux {
pins = "gpio129";
function = "gpio";
};
config {
pins = "gpio129";
drive-strength = <2>; /* 2 mA */
bias-pull-down;
input-enable;
};
};
spkr_2_sd_n_active: spkr_2_sd_n_active {
mux {
pins = "gpio129";
function = "gpio";
};
config {
pins = "gpio129";
drive-strength = <16>; /* 16 mA */
bias-disable;
output-high;
};
};
};
cam_sensor_6dof_vana_active: cam_sensor_6dof_vana_active {
/* AVDD LDO */
mux {
pins = "gpio43";
function = "gpio";
};
config {
pins = "gpio43";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_6dof_vana_suspend: cam_sensor_6dof_vana_suspend {
/* AVDD LDO */
mux {
pins = "gpio43";
function = "gpio";
};
config {
pins = "gpio43";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_6dof_vdig_active: cam_sensor_6dof_vdig_active {
/* VDIG LDO */
mux {
pins = "gpio42";
function = "gpio";
};
config {
pins = "gpio42";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_6dof_vdig_suspend: cam_sensor_6dof_vdig_suspend {
/* VDIG LDO */
mux {
pins = "gpio42";
function = "gpio";
};
config {
pins = "gpio42";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_6dof_vio_active: cam_sensor_6dof_vio_active {
/* VIO LDO */
mux {
pins = "gpio41";
function = "gpio";
};
config {
pins = "gpio41";
bias-disable; /* No PULL */
drive-strength = <2>; /* 2 MA */
};
};
cam_sensor_6dof_vio_suspend: cam_sensor_6dof_vio_suspend {
/* VIO LDO */
mux {
pins = "gpio41";
function = "gpio";
};
config {
pins = "gpio41";
bias-pull-down; /* PULL DOWN */
drive-strength = <2>; /* 2 MA */
};
};
};
&vendor {
kona_xrfusion_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
#include "fg-gen4-batterydata-goertek-6100mah.dtsi"
};
};
&qupv3_se12_2uart {
status = "okay";
};
&pm8150a_amoled {
status = "disabled";
};
&qupv3_se6_4uart {
status = "ok"
};
&dai_mi2s2 {
status = "disabled";
qcom,msm-mi2s-tx-lines = <1>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&tert_mi2s_sck_active &tert_mi2s_ws_active
&tert_mi2s_sd0_active>;
pinctrl-1 = <&tert_mi2s_sck_sleep &tert_mi2s_ws_sleep
&tert_mi2s_sd0_sleep>;
};
&kona_snd {
qcom,model = "kona-xrfusion-snd-card";
qcom,mi2s-audio-intf = <0>;
qcom,audio-routing =
"AMIC2", "MIC BIAS2",
"MIC BIAS2", "Analog Mic2",
"TX DMIC0", "MIC BIAS1",
"MIC BIAS1", "Digital Mic0",
"TX DMIC1", "MIC BIAS1",
"MIC BIAS1", "Digital Mic1",
"TX DMIC2", "MIC BIAS4",
"MIC BIAS4", "Digital Mic2",
"TX DMIC3", "MIC BIAS4",
"MIC BIAS4", "Digital Mic3",
"TX DMIC5", "MIC BIAS3",
"MIC BIAS3", "Digital Mic5",
"IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"IN3_AUX", "AUX_OUT",
"TX SWR_ADC0", "ADC1_OUTPUT",
"TX SWR_ADC1", "ADC2_OUTPUT",
"TX SWR_ADC2", "ADC3_OUTPUT",
"TX SWR_ADC3", "ADC4_OUTPUT",
"TX SWR_DMIC0", "DMIC1_OUTPUT",
"TX SWR_DMIC1", "DMIC2_OUTPUT",
"TX SWR_DMIC2", "DMIC3_OUTPUT",
"TX SWR_DMIC3", "DMIC4_OUTPUT",
"TX SWR_DMIC4", "DMIC5_OUTPUT",
"TX SWR_DMIC5", "DMIC6_OUTPUT",
"TX SWR_DMIC6", "DMIC7_OUTPUT",
"TX SWR_DMIC7", "DMIC8_OUTPUT",
"WSA SRC0_INP", "SRC0",
"WSA_TX DEC0_INP", "TX DEC0 MUX",
"WSA_TX DEC1_INP", "TX DEC1 MUX",
"RX_TX DEC0_INP", "TX DEC0 MUX",
"RX_TX DEC1_INP", "TX DEC1 MUX",
"RX_TX DEC2_INP", "TX DEC2 MUX",
"RX_TX DEC3_INP", "TX DEC3 MUX",
"SpkrRight IN", "WSA_SPK2 OUT",
"VA_AIF1 CAP", "VA_SWR_CLK",
"VA_AIF2 CAP", "VA_SWR_CLK",
"VA_AIF3 CAP", "VA_SWR_CLK",
"VA MIC BIAS3", "Digital Mic0",
"VA MIC BIAS3", "Digital Mic1",
"VA MIC BIAS1", "Digital Mic2",
"VA MIC BIAS1", "Digital Mic3",
"VA MIC BIAS4", "Digital Mic5",
"VA DMIC0", "VA MIC BIAS3",
"VA DMIC1", "VA MIC BIAS3",
"VA DMIC2", "VA MIC BIAS1",
"VA DMIC3", "VA MIC BIAS1",
"VA DMIC5", "VA MIC BIAS4",
"VA SWR_ADC1", "VA_SWR_CLK",
"VA SWR_MIC0", "VA_SWR_CLK",
"VA SWR_MIC1", "VA_SWR_CLK",
"VA SWR_MIC2", "VA_SWR_CLK",
"VA SWR_MIC3", "VA_SWR_CLK",
"VA SWR_MIC4", "VA_SWR_CLK",
"VA SWR_MIC5", "VA_SWR_CLK",
"VA SWR_MIC6", "VA_SWR_CLK",
"VA SWR_MIC7", "VA_SWR_CLK",
"VA SWR_MIC0", "DMIC1_OUTPUT",
"VA SWR_MIC1", "DMIC2_OUTPUT",
"VA SWR_MIC2", "DMIC3_OUTPUT",
"VA SWR_MIC3", "DMIC4_OUTPUT",
"VA SWR_MIC4", "DMIC5_OUTPUT",
"VA SWR_MIC5", "DMIC6_OUTPUT",
"VA SWR_MIC6", "DMIC7_OUTPUT",
"VA SWR_MIC7", "DMIC8_OUTPUT",
"VA SWR_ADC1", "ADC2_OUTPUT";
qcom,msm-mbhc-hphl-swh = <1>;
qcom,msm-mbhc-gnd-swh = <1>;
qcom,cdc-dmic01-gpios = <&cdc_dmic01_gpios>;
qcom,cdc-dmic23-gpios = <&cdc_dmic23_gpios>;
qcom,cdc-dmic45-gpios = <&cdc_dmic45_gpios>;
asoc-codec = <&stub_codec>, <&bolero>, <&ext_disp_audio_codec>;
asoc-codec-names = "msm-stub-codec.1", "bolero_codec",
"msm-ext-disp-audio-codec-rx";
qcom,wsa-max-devs = <2>;
qcom,wsa-devs = <&wsa881x_0211>, <&wsa881x_0212>,
<&wsa881x_0213>, <&wsa881x_0214>;
qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrRight",
"SpkrLeft", "SpkrRight";
qcom,codec-max-aux-devs = <1>;
qcom,codec-aux-devs = <&wcd938x_codec>;
qcom,msm_audio_ssr_devs = <&audio_apr>, <&q6core>, <&lpi_tlmm>,
<&bolero>;
};
&kona_snd_ar {
qcom,model = "kona-xrfusion-snd-card";
qcom,mi2s-audio-intf = <0>;
qcom,audio-routing =
"AMIC2", "MIC BIAS2",
"MIC BIAS2", "Analog Mic2",
"TX DMIC0", "MIC BIAS1",
"MIC BIAS1", "Digital Mic0",
"TX DMIC1", "MIC BIAS1",
"MIC BIAS1", "Digital Mic1",
"TX DMIC2", "MIC BIAS4",
"MIC BIAS4", "Digital Mic2",
"TX DMIC3", "MIC BIAS4",
"MIC BIAS4", "Digital Mic3",
"TX DMIC5", "MIC BIAS3",
"MIC BIAS3", "Digital Mic5",
"IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"IN3_AUX", "AUX_OUT",
"TX SWR_ADC0", "ADC1_OUTPUT",
"TX SWR_ADC1", "ADC2_OUTPUT",
"TX SWR_ADC2", "ADC3_OUTPUT",
"TX SWR_ADC3", "ADC4_OUTPUT",
"TX SWR_DMIC0", "DMIC1_OUTPUT",
"TX SWR_DMIC1", "DMIC2_OUTPUT",
"TX SWR_DMIC2", "DMIC3_OUTPUT",
"TX SWR_DMIC3", "DMIC4_OUTPUT",
"TX SWR_DMIC4", "DMIC5_OUTPUT",
"TX SWR_DMIC5", "DMIC6_OUTPUT",
"TX SWR_DMIC6", "DMIC7_OUTPUT",
"TX SWR_DMIC7", "DMIC8_OUTPUT",
"WSA SRC0_INP", "SRC0",
"WSA_TX DEC0_INP", "TX DEC0 MUX",
"WSA_TX DEC1_INP", "TX DEC1 MUX",
"RX_TX DEC0_INP", "TX DEC0 MUX",
"RX_TX DEC1_INP", "TX DEC1 MUX",
"RX_TX DEC2_INP", "TX DEC2 MUX",
"RX_TX DEC3_INP", "TX DEC3 MUX",
"SpkrRight IN", "WSA_SPK2 OUT",
"VA_AIF1 CAP", "VA_SWR_CLK",
"VA_AIF2 CAP", "VA_SWR_CLK",
"VA_AIF3 CAP", "VA_SWR_CLK",
"VA MIC BIAS3", "Digital Mic0",
"VA MIC BIAS3", "Digital Mic1",
"VA MIC BIAS1", "Digital Mic2",
"VA MIC BIAS1", "Digital Mic3",
"VA MIC BIAS4", "Digital Mic5",
"VA DMIC0", "VA MIC BIAS3",
"VA DMIC1", "VA MIC BIAS3",
"VA DMIC2", "VA MIC BIAS1",
"VA DMIC3", "VA MIC BIAS1",
"VA DMIC5", "VA MIC BIAS4",
"VA SWR_ADC1", "VA_SWR_CLK",
"VA SWR_MIC0", "VA_SWR_CLK",
"VA SWR_MIC1", "VA_SWR_CLK",
"VA SWR_MIC2", "VA_SWR_CLK",
"VA SWR_MIC3", "VA_SWR_CLK",
"VA SWR_MIC4", "VA_SWR_CLK",
"VA SWR_MIC5", "VA_SWR_CLK",
"VA SWR_MIC6", "VA_SWR_CLK",
"VA SWR_MIC7", "VA_SWR_CLK",
"VA SWR_MIC0", "DMIC1_OUTPUT",
"VA SWR_MIC1", "DMIC2_OUTPUT",
"VA SWR_MIC2", "DMIC3_OUTPUT",
"VA SWR_MIC3", "DMIC4_OUTPUT",
"VA SWR_MIC4", "DMIC5_OUTPUT",
"VA SWR_MIC5", "DMIC6_OUTPUT",
"VA SWR_MIC6", "DMIC7_OUTPUT",
"VA SWR_MIC7", "DMIC8_OUTPUT",
"VA SWR_ADC1", "ADC2_OUTPUT";
};
&pm8150_l10 {
regulator-max-microvolt = <3304000>;
qcom,init-voltage = <3304000>;
};
&qupv3_se1_i2c {
status = "ok"
qcom,clk-freq-out = <1000000>;
#address-cells = <1>;
#size-cells = <0>;
xrfancontroller: xrfancontroller@50 {
compatible = "maxim,xrfancontroller";
reg = <0x50>;
qcom,fan-pwr-en = <&tlmm 38 0x00>;
qcom,fan-pwr-bp = <&tlmm 39 0x00>;
};
};
&qupv3_se13_i2c {
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
&ufsphy_mem {
compatible = "qcom,ufs-phy-qmp-v4";
vdda-phy-supply = <&pm8150_l5>;
vdda-phy-always-on;
vdda-pll-supply = <&pm8150_l9>;
vdda-phy-max-microamp = <89900>;
vdda-pll-max-microamp = <18800>;
status = "ok"
};
&ufshc_mem {
vdd-hba-supply = <&ufs_phy_gdsc>;
vdd-hba-fixed-regulator;
vcc-supply = <&pm8150_l17>;
vcc-voltage-level = <2504000 2950000>;
vcc-low-voltage-sup;
vccq-supply = <&pm8150_l6>;
vccq2-supply = <&pm8150_s4>;
vcc-max-microamp = <800000>;
vccq-max-microamp = <800000>;
vccq2-max-microamp = <800000>;
qcom,vddp-ref-clk-supply = <&pm8150_l6>;
qcom,vddp-ref-clk-max-microamp = <100>;
qcom,vccq-parent-supply = <&pm8150a_s8>;
qcom,vccq-parent-max-microamp = <210000>;
status = "ok"
};
&soc {
gpio_keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default
&key_confirm_default
&key_vol_up_default>;
home {
label = "home";
gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
confirm {
label = "confirm";
gpios = <&pm8150_gpios 7 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_ENTER>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
vol_up {
label = "volume_up";
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
};
qcom,qbt_handler {
status = "disabled";
};
qcom,xr-stdalonevwr-misc {
status ="ok"
compatible = "qcom,xr-stdalonevwr-misc";
/* IMU CLK Enable PM8150 GPIO 3 */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&imu_clkin_default>;
pinctrl-1 = <&imu_clkin_sleep>;
};
};
&vreg_hap_boost {
status = "ok"
};
&pm8150b_haptics {
qcom,vmax-mv = <1697>;
qcom,play-rate-us = <5882>;
vdd-supply = <&vreg_hap_boost>;
wf_0 {
/* CLICK */
qcom,wf-play-rate-us = <5882>;
qcom,wf-vmax-mv = <1697>;
};
wf_1 {
/* DOUBLE CLICK */
qcom,wf-play-rate-us = <5882>;
qcom,wf-vmax-mv = <1697>;
};
wf_2 {
/* TICK */
qcom,wf-play-rate-us = <5882>;
qcom,wf-vmax-mv = <1697>;
};
wf_3 {
/* THUD */
qcom,wf-play-rate-us = <5882>;
qcom,wf-vmax-mv = <1697>;
};
wf_4 {
/* POP */
qcom,wf-play-rate-us = <5882>;
qcom,wf-vmax-mv = <1697>;
};
wf_5 {
/* HEAVY CLICK */
qcom,wf-play-rate-us = <5882>;
qcom,wf-vmax-mv = <1697>;
};
};
&pm8150b_vadc {
#address-cells = <1>;
#size-cells = <0>;
vph_pwr@83 {
reg = <ADC_VPH_PWR>;
label = "vph_pwr";
qcom,pre-scaling = <1 3>;
};
conn_therm@4f {
reg = <ADC_AMUX_THM3_PU2>;
label = "conn_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
chg_sbux@99 {
reg = <ADC_SBUx>;
label = "chg_sbux";
qcom,pre-scaling = <1 3>;
};
mid_chg_div6@1e {
reg = <ADC_MID_CHG_DIV6>;
label = "chg_mid";
qcom,pre-scaling = <1 6>;
};
usb_in_i_uv@7 {
reg = <ADC_USB_IN_I>;
label = "usb_in_i_uv";
qcom,pre-scaling = <1 1>;
};
usb_in_v_div_16@8 {
reg = <ADC_USB_IN_V_16>;
label = "usb_in_v_div_16";
qcom,pre-scaling = <1 16>;
};
};
&qupv3_se15_i2c {
#address-cells = <1>;
#size-cells = <0>;
status = "ok"
redriver: redriver@1c {
compatible = "onnn,redriver";
reg = <0x1c>;
extcon = <&pm8150b_pdphy>, <&pm8150b_pdphy>;
eq = /bits/ 8 <
/* Parameters for USB */
0x4 0x4 0x4 0x4
/* Parameters for DP */
0x6 0x4 0x4 0x6>;
flat-gain = /bits/ 8 <
/* Parameters for USB */
0x3 0x1 0x1 0x3
/* Parameters for DP */
0x2 0x1 0x1 0x2>;
output-comp = /bits/ 8 <
/* Parameters for USB */
0x3 0x3 0x3 0x3
/* Parameters for DP */
0x3 0x3 0x3 0x3>;
loss-match = /bits/ 8 <
/* Parameters for USB */
0x1 0x3 0x3 0x1
/* Parameters for DP */
0x3 0x3 0x3 0x3>;
};
#include "smb1390.dtsi"
};
&smb1390 {
pinctrl-names = "default";
pinctrl-0 = <&smb_stat_default>;
status = "ok"
};
&smb1390_charger {
io-channels = <&pm8150b_vadc ADC_AMUX_THM2>;
io-channel-names = "cp_die_temp";
qcom,parallel-output-mode = <2>;
status = "ok"
};
&smb1390_slave {
status = "ok"
};
&smb1390_slave_charger {
status = "ok"
};
&pm8150b_charger {
status = "ok"
qcom,sec-charger-config = <1>;
qcom,auto-recharge-soc = <98>;
io-channels = <&pm8150b_vadc ADC_MID_CHG_DIV6>,
<&pm8150b_vadc ADC_USB_IN_I>,
<&pm8150b_vadc ADC_SBUx>,
<&pm8150b_vadc ADC_VPH_PWR>,
<&pm8150b_vadc ADC_CHG_TEMP>;
io-channel-names = "mid_voltage",
"usb_in_current",
"sbux_res",
"vph_voltage",
"chg_temp";
qcom,battery-data = <&kona_xrfusion_batterydata>;
qcom,sw-jeita-enable;
qcom,wd-bark-time-secs = <16>;
qcom,suspend-input-on-debug-batt;
qcom,thermal-mitigation = <5325000 4500000 4000000 3500000 3000000
2500000 2000000 1500000 1000000 500000>;
};
&pm8150b_fg {
status = "ok"
qcom,battery-data = <&kona_xrfusion_batterydata>;
qcom,hold-soc-while-full;
qcom,linearize-soc;
qcom,five-pin-battery;
qcom,cl-wt-enable;
qcom,soc-scale-mode-en;
/* ESR fast calibration */
qcom,fg-esr-timer-chg-fast = <0 7>;
qcom,fg-esr-timer-dischg-fast = <0 7>;
qcom,fg-esr-timer-chg-slow = <0 96>;
qcom,fg-esr-timer-dischg-slow = <0 96>;
qcom,fg-esr-cal-soc-thresh = <26 230>;
qcom,fg-esr-cal-temp-thresh = <10 40>;
};
&pm8150_vadc {
#address-cells = <1>;
#size-cells = <0>;
vph_pwr@83 {
reg = <ADC_VPH_PWR>;
label = "vph_pwr";
qcom,pre-scaling = <1 3>;
};
vcoin@85 {
reg = <ADC_VCOIN>;
label = "vcoin";
qcom,pre-scaling = <1 3>;
};
xo_therm@4c {
reg = <ADC_XO_THERM_PU2>;
label = "xo_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
skin_therm@4d {
reg = <ADC_AMUX_THM1_PU2>;
label = "skin_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pa_therm1@4e {
reg = <ADC_AMUX_THM2_PU2>;
label = "pa_therm1";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pm8150l_vadc {
#address-cells = <1>;
#size-cells = <0>;
vph_pwr@83 {
reg = <ADC_VPH_PWR>;
label = "vph_pwr";
qcom,pre-scaling = <1 3>;
};
camera_flash_therm@4d {
reg = <ADC_AMUX_THM1_PU2>;
label = "camera_flash_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
skin_msm_therm@4e {
reg = <ADC_AMUX_THM2_PU2>;
label = "skin_msm_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pa_therm2@4f {
reg = <ADC_AMUX_THM3_PU2>;
label = "pa_therm2";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pm8150b_adc_tm {
#address-cells = <1>;
#size-cells = <0>;
io-channels = <&pm8150b_vadc ADC_AMUX_THM3_PU2>;
conn_therm@4f {
reg = <ADC_AMUX_THM3_PU2>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&pm8150_adc_tm {
#address-cells = <1>;
#size-cells = <0>;
io-channels = <&pm8150_vadc ADC_XO_THERM_PU2>,
<&pm8150_vadc ADC_AMUX_THM1_PU2>,
<&pm8150_vadc ADC_AMUX_THM2_PU2>;
xo_therm@4c {
reg = <ADC_XO_THERM_PU2>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
skin_therm@4d {
reg = <ADC_AMUX_THM1_PU2>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pa_therm1@4e {
reg = <ADC_AMUX_THM2_PU2>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&pm8150l_adc_tm {
#address-cells = <1>;
#size-cells = <0>;
camera_flash_therm@4d {
reg = <ADC_AMUX_THM1_PU2>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
skin_msm_therm@4e {
reg = <ADC_AMUX_THM2_PU2>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pa_therm2@4f {
reg = <ADC_AMUX_THM3_PU2>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&spmi_debug_bus {
status = "ok"
};
&sde_dsi {
avdd-supply = <&display_panel_avdd>;
lab-supply = <&lcdb_ldo_vreg>;
ibb-supply = <&lcdb_ncp_vreg>;
qcom,dsi-default-panel = <&dsi_dual_xrsmrtvwr_jdi_video>;
};
&display_panel_avdd {
display_panel_led1_gpio = <&tlmm 144 0>;
display_panel_led2_gpio = <&tlmm 140 0>;
enable-active-high;
regulator-boot-on;
pinctrl-names = "default";
pinctrl-0 = <&display_panel_led1_default
&display_panel_led2_default>;
};
&dsi_panel_pwr_supply_lab_ibb {
qcom,panel-supply-entry@3 {
reg = <1>;
qcom,supply-name = "avdd";
qcom,supply-min-voltage = <4600000>;
qcom,supply-max-voltage = <6000000>;
qcom,supply-enable-load = <100000>;
qcom,supply-disable-load = <100>;
};
};
&pm8150l_lcdb {
status = "ok"
};
&pm8150l_wled {
status = "ok"
};
&dsi_sw43404_amoled_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <1023>;
qcom,mdss-brightness-max-level = <255>;
qcom,platform-te-gpio = <&tlmm 66 0>;
qcom,platform-reset-gpio = <&tlmm 75 0>;
qcom,mdss-dsi-panel-test-pin = <&tlmm 46 0>;
};
&dsi_sw43404_amoled_video {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <1023>;
qcom,mdss-brightness-max-level = <255>;
qcom,platform-reset-gpio = <&tlmm 75 0>;
qcom,mdss-dsi-panel-test-pin = <&tlmm 46 0>;
};
&dsi_sw43404_amoled_fhd_plus_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <1023>;
qcom,mdss-brightness-max-level = <255>;
qcom,platform-te-gpio = <&tlmm 66 0>;
qcom,platform-reset-gpio = <&tlmm 75 0>;
qcom,mdss-dsi-panel-test-pin = <&tlmm 46 0>;
};
&dsi_sim_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,platform-reset-gpio = <&tlmm 75 0>;
};
&dsi_sim_vid {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,platform-reset-gpio = <&tlmm 75 0>;
};
&dsi_sim_dsc_375_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,platform-reset-gpio = <&tlmm 75 0>;
};
&dsi_sim_dsc_10b_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,platform-reset-gpio = <&tlmm 75 0>;
};
&dsi_dual_sim_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,platform-reset-gpio = <&tlmm 75 0>;
};
&dsi_dual_sim_vid {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,platform-reset-gpio = <&tlmm 75 0>;
};
&dsi_dual_sim_dsc_375_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,platform-reset-gpio = <&tlmm 75 0>;
};
&thermal_zones {
conn-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm8150b_adc_tm ADC_AMUX_THM3_PU2>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
xo-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm8150_adc_tm ADC_XO_THERM_PU2>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
skin-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm8150_adc_tm ADC_AMUX_THM1_PU2>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
mmw-pa1-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm8150_adc_tm ADC_AMUX_THM2_PU2>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
camera-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM1_PU2>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
skin-msm-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM2_PU2>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
mmw-pa2-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM3_PU2>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
&sdhc_2 {
vdd-supply = <&pm8150a_l9>;
qcom,vdd-voltage-level = <2950000 2960000>;
qcom,vdd-current-level = <200 800000>;
vdd-io-supply = <&pm8150a_l6>;
qcom,vdd-io-voltage-level = <1808000 2960000>;
qcom,vdd-io-current-level = <200 22000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &storage_cd>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &storage_cd>;
cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>; /* Morpheus has to be HIGH */
status = "ok"
};
&vendor {
bluetooth: bt_qca6390 {
compatible = "qca,qca6390";
pinctrl-names = "default";
pinctrl-0 = <&bt_en_sleep>;
qca,bt-reset-gpio = <&tlmm 21 0>; /* BT_EN */
qca,bt-sw-ctrl-gpio = <&tlmm 124 0>; /* SW_CTRL */
qca,bt-vdd-aon-supply = <&pm8150_s6>;
qca,bt-vdd-dig-supply = <&pm8009_s2>;
qca,bt-vdd-rfa1-supply = <&pm8150_s5>;
qca,bt-vdd-rfa2-supply = <&pm8150a_s8>;
qca,bt-vdd-asd-supply = <&pm8150_l16>;
qca,bt-vdd-aon-voltage-level = <950000 950000>;
qca,bt-vdd-dig-voltage-level = <950000 952000>;
qca,bt-vdd-rfa1-voltage-level = <1900000 1900000>;
qca,bt-vdd-rfa2-voltage-level = <1350000 1350000>;
qca,bt-vdd-asd-voltage-level = <3024000 3304000>;
qca,bt-vdd-asd-current-level = <10000>;
};
};
&usb0 {
dwc3@a600000 {
maximum-speed = "super-speed-plus";
};
};
&usb1 {
qcom,default-mode-none;
};
&wil6210 {
status = "ok"
};
&usb2_phy0 {
qcom,param-override-seq =
<0xc7 0x6c
0x0f 0x70
0x03 0x74>;
};
&mdss_mdp {
qcom,sde-mixer-display-pref = "primary", "primary", "primary",
"primary", "none", "none";
connectors = <&sde_dp &sde_dsi &sde_dsi1 &sde_rscc>;
};
&sde_wb {
status = "disabled";
};
&dsi_dual_xrsmrtvwr_jdi_video {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_lab_ibb>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_external";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-brightness-max-level = <255>;
qcom,platform-reset-gpio = <&tlmm 75 0>;
qcom,platform-te-gpio = <&tlmm 66 0>;
qcom,platform-bklight-en-gpio = <&tlmm 133 0>;
qcom,5v-boost-gpio = <&tlmm 134 0>;
/delete-property/ qcom,platform-en-gpio;
qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";
qcom,mdss-dsi-panel-status-value = <0x9c>;
qcom,mdss-dsi-panel-on-check-value = <0x9c>;
qcom,mdss-dsi-panel-status-read-length = <1>;
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
qcom,mdss-dsi-min-refresh-rate = <60>;
qcom,mdss-dsi-max-refresh-rate = <90>;
qcom,mdss-dsi-display-timings {
timing@0 {
qcom,mdss-dsi-panel-width = <2160>;
qcom,mdss-dsi-panel-height = <2160>;
qcom,mdss-dsi-h-front-porch = <20>;
qcom,mdss-dsi-h-back-porch = <20>;
qcom,mdss-dsi-h-pulse-width = <20>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-v-back-porch = <20>;
qcom,mdss-dsi-v-front-porch = <936>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-panel-framerate = <90>;
qcom,mdss-dsi-on-command = [
29 01 00 00 00 00 02 B0 04
29 01 00 00 00 00 02 D6 00
29 01 00 00 00 00 0A B6 30 6B 80 06 33
8A 00 1A 7A
29 01 00 00 00 00 05 B7 54 00 00 00
29 01 00 00 00 00 05 B9 10 00 01 38
29 01 00 00 00 00 09 C0 51 86 64 00 08
70 07 00
29 01 00 00 00 00 02 F1 1E
29 01 00 00 00 00 11 C6 70 08 D0 02 21
6F 08 5A 00 00 00 00 00 00 00 00
29 01 00 00 00 00 02 CD 00
29 01 00 00 00 00 08 CF 8B 00 80 46 61
00 8B
29 01 00 00 00 00 06 EC 02 96 00 00 00
39 01 00 00 00 00 02 03 01
39 01 00 00 00 00 03 44 00 00
39 01 00 00 00 00 02 35 00
39 01 00 00 00 00 02 36 00
39 01 00 00 00 00 02 3A 77
05 01 00 00 02 00 02 29 00
05 01 00 00 80 00 02 11 00
29 01 00 00 00 00 02 D6 80
29 01 00 00 00 00 02 B0 03
];
qcom,mdss-dsi-off-command = [
05 01 00 00 32 00 02 28 00
05 01 00 00 32 00 02 34 00
05 01 00 00 78 00 02 10 00
];
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,compression-mode = "dsc";
qcom,mdss-dsc-slice-height = <8>;
qcom,mdss-dsc-slice-width = <540>;
qcom,mdss-dsc-slice-per-pkt = <2>;
qcom,mdss-dsc-bit-per-component = <8>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
qcom,mdss-dsi-panel-phy-timings = [00 17 05 05 20 1F
06 06 03 02 04 00 13 15];
qcom,display-topology = <4 4 2>,
<1 0 2>;
qcom,default-topology-index = <0>;
};
};
};
Reference in new issue View Git Blame Copy Permalink