duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
2126a2f97f3583dc34f4ec5ea9333d1babc7ea17
android_kernel_motorola_sm6225/qcom/bengal-guam-common-overlay.dtsi
T
a17671 2126a2f97f dts:Enable dual role interface support 
MicroB USB interface product needs dual role interface
Enable it so the charging driver could report power role
data role change to the USB HAL

Change-Id: I78e8d047d0289ffa2e87f8564ef991a4b3c6d0cd
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1534494
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
2023-05-31 17:01:00 -03:00

281 lines
6.8 KiB
Devicetree
Raw Blame History

/* Copyright (c) 2019, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "bengal-moto-common-overlay.dtsi"
#include "bengal-guam-display.dtsi"
#include "bengal-audio-overlay.dtsi"
#include "bengal-guam-touchscreen-overlay.dtsi"
#include "camera/bengal-camera-sensor-mot-guam-overlay.dtsi"
#include "bengal-guam-fps.dtsi"
#include "bengal-guam-moto-thermal.dtsi"
&qupv3_se4_2uart {
status = "ok"
};
&pm6125_gpios {
key_vol_up {
key_vol_up_default: key_vol_up_default {
pins = "gpio5";
function = "normal";
input-enable;
bias-pull-up;
power-source = <0>;
};
};
};
&tlmm{
capsense_sar_gpio_pins: capsense_sar_gpio_pins {
mux {
pins = "gpio96", "gpio97";
function = "gpio";
};
config {
pins = "gpio96", "gpio97";
drive-strength = <2>;
bias-pull-up;
};
};
tlmm_gpio_key {
gpio_key_active: gpio_key_active {
mux {
pins = "gpio33";
function = "gpio";
};
config {
pins = "gpio33";
drive-strength = <2>;
bias-pull-up;
};
};
};
};
&soc {
/delete-node/ qupv3_se0_spi;
gpio_keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default &gpio_key_active>;
vol_up {
label = "volume_up";
gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
linux,can-disable;
debounce-interval = <15>;
gpio-key,wakeup;
};
assist_key{
label = "assist_key";
gpios = <&tlmm 33 0x1>;
linux,input-type = <1>;
linux,code = <KEY_SEARCH>;
debounce-interval = <15>;
linux,can-disable;
gpio-key,wakeup;
};
};
};
&sdhc_1 {
vdd-supply = <&L24A>;
qcom,vdd-voltage-level = <2960000 2960000>;
qcom,vdd-current-level = <0 570000>;
vdd-io-supply = <&L11A>;
qcom,vdd-io-always-on;
qcom,vdd-io-lpm-sup;
qcom,vdd-io-voltage-level = <1800000 1800000>;
qcom,vdd-io-current-level = <0 325000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
&sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
&sdc1_rclk_off>;
status = "ok"
};
&sdhc_2 {
vdd-supply = <&L22A>;
qcom,vdd-voltage-level = <2960000 2960000>;
qcom,vdd-current-level = <0 800000>;
vdd-io-supply = <&L5A>;
qcom,vdd-io-voltage-level = <1800000 2960000>;
qcom,vdd-io-current-level = <0 22000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
status = "ok"
};
&ufsphy_mem {
compatible = "qcom,ufs-phy-qmp-v3-660";
vdda-phy-supply = <&L4A>; /* 0.9v */
vdda-pll-supply = <&L12A>; /* 1.8v */
vdda-phy-max-microamp = <51400>;
vdda-pll-max-microamp = <14200>;
status = "ok"
};
&ufshc_mem {
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
vdd-hba-fixed-regulator;
vcc-supply = <&L24A>;
vcc-voltage-level = <2950000 2960000>;
vccq2-supply = <&L11A>;
vcc-max-microamp = <600000>;
vccq2-max-microamp = <600000>;
qcom,vddp-ref-clk-supply = <&L18A>;
qcom,vddp-ref-clk-max-microamp = <100>;
qcom,vddp-ref-clk-min-uV = <1232000>;
qcom,vddp-ref-clk-max-uV = <1232000>;
status = "ok"
};
&sde_dsi {
qcom,dsi-default-panel = <&dsi_hlt_hx83102d_video>;
};
&soc{
mtp_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
df-serialnum = "SB18C77591";
#include "qg-batterydata-jk50-atl-4850mah.dtsi"
#include "qg-batterydata-jk50-scud-4850mah.dtsi"
#include "qg-batterydata-jk50-atl-flex-4850mah.dtsi"
#include "qg-batterydata-jk50-atl-unicoba-4850mah.dtsi"
};
};
&pmi632_qg {
qcom,qg-iterm-ma = <300>;
qcom,vbatt-cutoff-mv = <3200>;
qcom,vbatt-empty-mv = <3000>;
qcom,vbatt-low-mv = <3300>;
qcom,vbatt-low-cold-mv = <3500>;
qcom,battery-data = <&mtp_batterydata>;
qcom,rbat-conn-mohm = <10>;
qcom,cl-feedback-on;
qcom,cl-min-start-soc = <0>;
qcom,cl-max-start-soc = <5>;
qcom,cl-min-temp = <150>;
qcom,cl-max-temp = <450>;
qcom,cl-max-increment = <5>;
qcom,cl-max-decrement = <10>;
qcom,cl-min-limit = <200>;
qcom,cl-max-limit = <30>;
qcom,s3-entry-ibat-ua = <15000>;
qcom,s3-exit-ibat-ua = <35000>;
qcom,vbatt-empty-cold-mv = <3000>;
qcom,ignore-shutdown-soc-secs = <1800>;
qcom.hold-soc-while-full;
qcom,linearize-soc;
};
&pmi632_rgb {
red {
label = "charging";
};
};
&pmi632_charger {
qcom,iterm-ma = <200>;
qcom,fcc-max-ua = <2000000>;
qcom,fv-max-uv = <4400000>;
qcom,usb-icl-ua = <2000000>;
qcom,thermal-mitigation = <2000>,
<1800>,
<1600>,
<1300>,
<1100>,
<900>,
<600>,
<400>;
qcom,battery-data = <&mtp_batterydata>;
qcom,mmi-temp-zones = <0 4200 1000 0>,
<10 4200 1000 1000>,
<15 0 1000 1000>,
<45 4200 2000 2000>,
<60 4200 2000 0>;
qcom,enable-charging-limit;
qcom,upper-limit-capacity = <75>;
qcom,lower-limit-capacity = <60>;
qcom,dr_supported;
qcom,hvdcp-disable;
qcom,otg-cl-ua = <1000000>;
qcom,dc-unsupported;
qcom,wireless-unsupported;
qcom,usbeb-unsupported;
qcom,disable-suspend-on-collapse;
dpdm-supply = <&qusb_phy0>;
qcom,auto-recharge-soc = <99>;
};
&qupv3_se0_i2c {
status = "ok"
abov_sar@20 {
status = "ok"
compatible = "abov,abov_sar_mmi_overlay";
reg = <0x20>;
cap_vdd-supply = <&L21A>;
cap_svdd-supply = <&L21A>;
interrupt-parent = <&tlmm>;
interrupts = <36 0x2>;
gpios = <&tlmm 36 0x2>;
pinctrl-names = "default";
pinctrl-0 = <&capsense_sar_gpio_pins>;
reg_array_len = <0x03>;
reg_array_val = <0x07 0x00 0x08 0x1B 0xFB 0x01>;
cap,use_channel_ch1 = <0x00>;
cap,use_channel_ch0 = <0x01>;
ch0_name = "capsense_top";
ch1_name = "capsense_bottom";
label = "AbovCapSense";
cap,channel_number = <0x02>;
};
};
&soc {
qcom,tz_gpio {
compatible = "qcom,tz_gpio";
tlmm-tz = <14>,
<15>,
<16>,
<17>;
};
};
Reference in new issue View Git Blame Copy Permalink