duff/android_kernel_motorola_sm6225
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
026856b19115429795c37789800ce7050fa67c35
android_kernel_motorola_sm6225/qcom/dsi-panel-mot-csot-nt37701-655-1080x2400-dsc-cmd-common.dtsi
T
huaqin79 026856b191 rhode:arm/dts:Modify the lcd driver for rhode. 
Modify the lcd driver for rhode:
1.Modify settings related to LCD Swire pulse in kernel stage；
2.Modify the delay after kernel stage LCD sleep out；
3.Modify the LCD refresh rate in the kernel phase;

Change-Id: I8d608ecba60ece709bb18f0dc40e111ad594e558
Signed-off-by: huaqin79 <huaqin79@motorola.com>
Reviewed-on: https://gerrit.mot.com/2166797
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
2023-05-31 17:01:04 -03:00

375 lines
13 KiB
Devicetree
Raw Blame History

/* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&mdss_mdp {
mot_csot_nt37701_655_1080x2400_dsc_cmd_v0: qcom,mdss_dsi_mot_csot_nt37701_655_1080x2400_dsc_cmd_v0 {
compatible = "qcom,mdss-dsi-panel";
qcom,mdss-dsi-panel-name = "mipi_mot_cmd_csot_1080p_dsc_655";
qcom,mdss-dsi-panel-supplier = "csot";
qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
qcom,mdss-dsi-virtual-channel-id = <0>;
qcom,mdss-dsi-stream = <0>;
qcom,mdss-pan-physical-width-dimension = <68>;
qcom,mdss-pan-physical-height-dimension = <152>;
qcom,mdss-dsi-bpp = <30>;
qcom,mdss-dsi-underflow-color = <0xff>;
qcom,mdss-dsi-border-color = <0>;
qcom,mdss-dsi-panel-param-verision = <121201>;
qcom,mdss-dsi-panel-param-num = <5>;
qcom,dsi-ctrl-num = <0>;
qcom,dsi-phy-num = <0>;
qcom,mdss-dsi-traffic-mode = "burst_mode";
qcom,mdss-dsi-bllp-eof-power-mode;
qcom,mdss-dsi-bllp-power-mode;
qcom,mdss-dsi-lane-0-state;
qcom,mdss-dsi-lane-1-state;
qcom,mdss-dsi-lane-2-state;
qcom,mdss-dsi-lane-3-state;
qcom,mdss-dsi-dma-trigger = "trigger_sw";
qcom,mdss-dsi-mdp-trigger = "none";
qcom,mdss-dsi-reset-sequence = <0 11>, <1 1>, <0 1>, <1 11>;
qcom,mdss-dsi-lp11-init;
qcom,mdss-dsi-tx-eot-append;
qcom,mdss-dsi-te-pin-select = <1>;
qcom,mdss-dsi-te-dcs-command = <1>;
qcom,mdss-dsi-te-using-te-pin;
qcom,bklt-dcs-2bytes-enabled;
qcom,mdss-dsi-bl-min-level = <3>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
/*qcom,mdss-dsi-panel-hdr-enabled;
qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
17000 15500 30000 8000 3000>;
qcom,mdss-dsi-panel-peak-brightness = <4200000>;
qcom,mdss-dsi-panel-blackness-level = <3230>;*/
qcom,mdss-dsi-hbm-on-command = [
39 01 00 00 00 00 03 51 0F FF];
qcom,mdss-dsi-hbm-off-command = [
39 01 00 00 00 00 03 51 07 FF];
qcom,mdss-dsi-hbm-fod;
qcom,mdss-dsi-hbm-fod-on-command = [
39 01 00 00 00 00 03 51 0F FF];
//qcom,mdss-dsi-acl-on-command = [
// 39 01 00 00 00 00 06 F0 55 AA 52 08 00
// 15 00 00 00 00 00 02 B0 0C
// 15 01 00 00 00 00 02 55 05];
//qcom,mdss-dsi-acl-off-command = [
// 15 01 00 00 00 00 02 55 00];
qcom,mdss-dsi-dc-off-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 18
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
15 01 00 00 00 00 02 58 00];
qcom,mdss-dsi-dc-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-dc-on-command = [
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 98
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 09 B2 60 50 60 00 80 00 2F FF
39 00 00 00 00 00 0D B3 00 00 00 00 00 00 00 00 00 00 00 00
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 00 00 00 00 00 00 00 00 00 00 00 00
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
15 01 00 00 00 00 02 58 01];
qcom,mdss-dsi-dc-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-display-timings {
timing@0{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <48>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <16>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <4>;
qcom,mdss-dsi-v-front-porch = <12>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
15 01 00 00 14 00 02 2F 08 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 01 00 00 00 00 06 F0 55 AA 52 08 00
15 01 00 00 00 00 02 6F 06
39 01 00 00 00 00 04 B5 4B 22 4F //swire pulse
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 18
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
15 01 00 00 00 00 02 58 00 //DC code
39 01 00 00 00 00 06 F0 55 AA 52 08 00
15 01 00 00 00 00 02 6F 1C
39 01 00 00 00 00 06 C0 03 14 25 A9 78
39 01 00 00 00 00 06 F0 55 AA 52 08 04
15 01 00 00 00 00 02 CB 06
39 01 00 00 00 00 06 F0 55 AA 52 08 01
39 01 00 00 00 00 03 CD 05 71
39 01 00 00 00 00 05 FF AA 55 A5 80
15 01 00 00 00 00 02 6F 1D
15 01 00 00 00 00 02 F2 05 //Corner&Hole page0
39 01 00 00 00 00 05 3B 00 10 00 20
15 01 00 00 00 00 02 03 01
15 01 00 00 00 00 02 90 01
39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
15 01 00 00 00 00 02 2C 00 //dsc config 10bit
39 01 00 00 00 00 03 51 00 00
15 01 00 00 00 00 02 53 20
15 01 00 00 00 00 02 35 00 //te enable
39 01 00 00 00 00 05 2A 00 00 04 37
39 01 00 00 00 00 05 2B 00 00 09 5F
15 01 00 00 00 00 02 2F 08 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
05 01 00 00 78 00 01 11
05 01 00 00 00 00 01 29]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 00 00 01 28 /* display_off */
05 01 00 00 78 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <8>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
timing@1{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <60>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <16>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <4>;
qcom,mdss-dsi-v-front-porch = <12>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
15 01 00 00 10 00 02 2F 03 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 01 00 00 00 00 06 F0 55 AA 52 08 00
15 01 00 00 00 00 02 6F 06
39 01 00 00 00 00 04 B5 4B 22 4F //swire pulse
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 18
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
15 01 00 00 00 00 02 58 00 //DC code
39 01 00 00 00 00 06 F0 55 AA 52 08 00
15 01 00 00 00 00 02 6F 1C
39 01 00 00 00 00 06 C0 03 14 25 A9 78
39 01 00 00 00 00 06 F0 55 AA 52 08 04
15 01 00 00 00 00 02 CB 06
39 01 00 00 00 00 06 F0 55 AA 52 08 01
39 01 00 00 00 00 03 CD 05 71
39 01 00 00 00 00 05 FF AA 55 A5 80
15 01 00 00 00 00 02 6F 1D
15 01 00 00 00 00 02 F2 05 //Corner&Hole page0
39 01 00 00 00 00 05 3B 00 10 00 20
15 01 00 00 00 00 02 03 01
15 01 00 00 00 00 02 90 01
39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
15 01 00 00 00 00 02 2C 00 //dsc config 10bit
39 01 00 00 00 00 03 51 00 00
15 01 00 00 00 00 02 53 20
15 01 00 00 00 00 02 35 00 //te enable
39 01 00 00 00 00 05 2A 00 00 04 37
39 01 00 00 00 00 05 2B 00 00 09 5F
15 01 00 00 00 00 02 2F 03 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
05 01 00 00 78 00 01 11
05 01 00 00 00 00 01 29]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 00 00 01 28 /* display_off */
05 01 00 00 78 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <8>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
timing@2{
qcom,mdss-dsi-cmd-mode;
qcom,mdss-dsi-panel-framerate = <90>;
qcom,mdss-dsi-panel-width = <1080>;
qcom,mdss-dsi-panel-height = <2400>;
qcom,mdss-dsi-h-front-porch = <32>;
qcom,mdss-dsi-h-back-porch = <32>;
qcom,mdss-dsi-h-pulse-width = <16>;
qcom,mdss-dsi-h-sync-skew = <0>;
qcom,mdss-dsi-h-sync-pulse = <0>;
qcom,mdss-dsi-v-back-porch = <4>;
qcom,mdss-dsi-v-front-porch = <12>;
qcom,mdss-dsi-v-pulse-width = <4>;
qcom,mdss-dsi-h-left-border = <0>;
qcom,mdss-dsi-h-right-border = <0>;
qcom,mdss-dsi-v-top-border = <0>;
qcom,mdss-dsi-v-bottom-border = <0>;
qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
qcom,mdss-dsi-timing-switch-command = [
15 01 00 00 0b 00 02 2F 07 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
];
qcom,mdss-dsi-on-command = [
39 01 00 00 00 00 06 F0 55 AA 52 08 00
15 01 00 00 00 00 02 6F 06
39 01 00 00 00 00 04 B5 4B 22 4F //swire pulse
39 00 00 00 00 00 06 F0 55 AA 52 08 00
15 00 00 00 00 00 02 B2 18
15 00 00 00 00 00 02 6F 0F
39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
15 00 00 00 00 00 02 6F 0C
39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
15 00 00 00 00 00 02 6F 18
39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
15 01 00 00 00 00 02 58 00 //DC code
39 01 00 00 00 00 06 F0 55 AA 52 08 00
15 01 00 00 00 00 02 6F 1C
39 01 00 00 00 00 06 C0 03 14 25 A9 78
39 01 00 00 00 00 06 F0 55 AA 52 08 04
15 01 00 00 00 00 02 CB 06
39 01 00 00 00 00 06 F0 55 AA 52 08 01
39 01 00 00 00 00 03 CD 05 71
39 01 00 00 00 00 05 FF AA 55 A5 80
15 01 00 00 00 00 02 6F 1D
15 01 00 00 00 00 02 F2 05 //Corner&Hole page0
39 01 00 00 00 00 05 3B 00 10 00 20
15 01 00 00 00 00 02 03 01
15 01 00 00 00 00 02 90 01
39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
15 01 00 00 00 00 02 2C 00 //dsc config 10bit
39 01 00 00 00 00 03 51 00 00
15 01 00 00 00 00 02 53 20
15 01 00 00 00 00 02 35 00 //te enable
39 01 00 00 00 00 05 2A 00 00 04 37
39 01 00 00 00 00 05 2B 00 00 09 5F
15 01 00 00 00 00 02 2F 07 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
05 01 00 00 78 00 01 11
05 01 00 00 00 00 01 29]; /* display on */
qcom,mdss-dsi-off-command = [
05 01 00 00 00 00 01 28 /* display_off */
05 01 00 00 78 00 01 10]; /* enter sleep mode */
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
qcom,mdss-dsi-timing-switch-command-state =
"dsi_lp_mode";
qcom,compression-mode = "dsc";
/* Why QCOM doesn't use this, even it used 2 encoder
* as for that dsi_sw43404_amoled_cmd, for ex */
/* qcom,mdss-dsc-encoders = <2>; */
qcom,mdss-dsc-version = <0x11>;
qcom,mdss-dsc-slice-height = <12>;
qcom,mdss-dsc-slice-width = <1080>;
qcom,mdss-dsc-slice-per-pkt = <1>;
qcom,mdss-dsc-bit-per-component = <8>;
qcom,mdss-dsc-bit-per-pixel = <8>;
qcom,mdss-dsc-block-prediction-enable;
};
};
};
};
Reference in new issue View Git Blame Copy Permalink