Add typec CID event for notification between modules
who need to be notified.
Change-Id: If07c5c0d34ea9dcd3ca79075b6bff86852e562a5
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2674695
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
This introduces a new class method to suppress touch events sourced
outside or within specified clip area. To enable suppressing touch
events reported outside specified clip area, add the following DT
property:
mmi,clip-area = <xUL yUL xBR yBR>;
Suppressing touch events from within requires DT property:
mmi,clip-inversion;
Class driver's method will send forced lift event when an active
touch moves outside/within clip area and indicate this to the vendor
driver by setting type to TS_COORDINATE_ACTION_FORCE_LIFT in
touch_event_data structure.
Change-Id: I327af4441e179e381be97cb8083698d76882caa8
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2641660
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: <zhuwg1@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
when flip state change, modify reg list which read from dts
Change-Id: I739c6fb5b1a531886b6fce527451633cb74af912
Signed-off-by: cuijy1 <cuijy2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2514472
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
add lable to distinguish whether to calibration
when flpi state change
Change-Id: I00d386ee6c5dd70ba22b1fba3e22fb6cd5704b79
Signed-off-by: qiurp1 <qiurp1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2498055
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jiyue Cui <cuijy2@lenovo.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
1.porting from sx937x about re-initialize machanism
2.reset chipset instead of cali for bronco only,
use dts to control it and will not impact other projects
Change-Id: Ifd616a57863cdd96641440a5b2926ec9286f60ee
Signed-off-by: weimh1@motorola.com <weimh1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2463575
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lijun Chen <chenlj2@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1.Add cli_gesture sysfs node on mmi touch screen class,use this node to
notify which gesture type that user set.
2.Create another tap sensor named s-dt-gesture,use it to report CLI
touch gesture events.
Change-Id: I9e954a00a2a5f37ff54be08d99c0b904516a57b7
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2381634
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Some 3rd charger support PD and HVDCP. The charger will send pd reset
when detect hvdcp and only send fixed pdo to AP. So don't detect HVDCP
when pd active.
Change-Id: I820f7ac1018d65ef02cf242ccabb2e8539c67f87
Signed-off-by: Haijian Ma <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2281956
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
mmi_check_dynamic_device_node() uses of_find_node_by_path() to get device
node so that mmi_device_is_available() can use this node to find where is
"mmi,status".but need use of_node_put() to put this node in there drivers.
So move "mmi_device_is_available()" into "mmi_check_dynamic_device_node()"
and put the device node at the end.
Change-Id: Id42e73b844ef6928ebea673dcd7f9c57c8804f8b
Reviewed-on: https://gerrit.mot.com/2271017
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
New interface to set/get touchscreen active region parameters. This
interface intended for use by Rollable Display HAL
Change-Id: I78e99893ff9b694ea61143e8d79311954840aa6b
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2237772
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
For special factory test, USB DP/DM may should not be
operated when VBUS status changed. So we will add
DP/DM operation ignore options in power supply property.
Change-Id: I226c02cf126ecae9308804334c1bdbfb933d7bac
Reviewed-on: https://gerrit.mot.com/2263246
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
all mmi power supply defined in mmi_discrete_power_supply.h
to remove discrete defined in many files.
Change-Id: I41c978961072f7aedf398df0984467d3d7d089b1
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2261274
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Wei <weiweij@motorola.com>
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1. Register FOD state thru mmi_relay.
2. Send Fod event when FOD is enabled.
Change-Id: I56fed42e8377dc86c84e8dd1042cd04a55fb0a16
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2205960
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
CLI parade touch need to do suspend and resume when receiving
suspend and resume notifications from display module.
Change-Id: Ibcb2e10f5974b9e546b9ffd0aa2ead3d106e4a0d
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2200231
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Support receiving dual-screen notifications to support
touch ic suspend and resume.
Change-Id: I2af3fb7632ca164c85626957f42c0d3dca2af179
Reviewed-on: https://gerrit.mot.com/2188839
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Reviewed-by: <zhuwg1@motorola.com>
Submit-Approved: Jira Key
The power supply of sar sensor is changed from 1.7v
to 2.8v to solve the problem of voltage jump
Change-Id: Ia731c372ddce703743d3966ddf7e185e5225cb06
Signed-off-by: huaqin79 <huaqin79@motorola.com>
Reviewed-on: https://gerrit.mot.com/2138719
Reviewed-by: Hong Zhang <zhangh12@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
ref_channel will be tested failed on factory, it should be filter for user,
add "ref_channel" on dts, it won't be registered to sensor_class.
Change-Id: Ibc5c927d5441665066aba990ecab36dbd7d03e47
Signed-off-by: zhangh12 <zhangh12@motorola.com>
Reviewed-on: https://gerrit.mot.com/2134407
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
add get charing current api for discrete_charger_class
factory tcmd will use this api
Change-Id: I1a6011fcf7b936329e6ae1b7787b6e86078b8915
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2090448
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
To avoid uncessary register driver, a dynamic check device status
interface can be used to judge before register driver.
Change-Id: I07d61a80ca46b955110c37588a1a466b0b4f2922
Reviewed-on: https://gerrit.mot.com/2074097
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Yonghua Yan