b1faae94de33eddb0a95f3987ceaaa24b1372861
56166
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Remi Pommarel
|
e7a83f66c5 |
batman-adv: Do not let TT changes list grows indefinitely
[ Upstream commit fff8f17c1a6fc802ca23bbd3a276abfde8cc58e6 ]
When TT changes list is too big to fit in packet due to MTU size, an
empty OGM is sent expected other node to send TT request to get the
changes. The issue is that tt.last_changeset was not built thus the
originator was responding with previous changes to those TT requests
(see batadv_send_my_tt_response). Also the changes list was never
cleaned up effectively never ending growing from this point onwards,
repeatedly sending the same TT response changes over and over, and
creating a new empty OGM every OGM interval expecting for the local
changes to be purged.
When there is more TT changes that can fit in packet, drop all changes,
send empty OGM and wait for TT request so we can respond with a full
table instead.
Fixes:
|
||
|
Remi Pommarel
|
1a7ab96602 |
batman-adv: Remove uninitialized data in full table TT response
[ Upstream commit 8038806db64da15721775d6b834990cacbfcf0b2 ]
The number of entries filled by batadv_tt_tvlv_generate() can be less
than initially expected in batadv_tt_prepare_tvlv_{global,local}_data()
(changes can be removed by batadv_tt_local_event() in ADD+DEL sequence
in the meantime as the lock held during the whole tvlv global/local data
generation).
Thus tvlv_len could be bigger than the actual TT entry size that need
to be sent so full table TT_RESPONSE could hold invalid TT entries such
as below.
* 00:00:00:00:00:00 -1 [....] ( 0) 88:12:4e:ad:7e:ba (179) (0x45845380)
* 00:00:00:00:78:79 4092 [.W..] ( 0) 88:12:4e:ad:7e:3c (145) (0x8ebadb8b)
Remove the extra allocated space to avoid sending uninitialized entries
for full table TT_RESPONSE in both batadv_send_other_tt_response() and
batadv_send_my_tt_response().
Fixes:
|
||
|
Remi Pommarel
|
5730124c2f |
batman-adv: Do not send uninitialized TT changes
[ Upstream commit f2f7358c3890e7366cbcb7512b4bc8b4394b2d61 ]
The number of TT changes can be less than initially expected in
batadv_tt_tvlv_container_update() (changes can be removed by
batadv_tt_local_event() in ADD+DEL sequence between reading
tt_diff_entries_num and actually iterating the change list under lock).
Thus tt_diff_len could be bigger than the actual changes size that need
to be sent. Because batadv_send_my_tt_response sends the whole
packet, uninitialized data can be interpreted as TT changes on other
nodes leading to weird TT global entries on those nodes such as:
* 00:00:00:00:00:00 -1 [....] ( 0) 88:12:4e:ad:7e:ba (179) (0x45845380)
* 00:00:00:00:78:79 4092 [.W..] ( 0) 88:12:4e:ad:7e:3c (145) (0x8ebadb8b)
All of the above also applies to OGM tvlv container buffer's tvlv_len.
Remove the extra allocated space to avoid sending uninitialized TT
changes in batadv_send_my_tt_response() and batadv_v_ogm_send_softif().
Fixes:
|
||
|
Breno Leitao
|
4a055349d5 |
netpoll: Use rcu_access_pointer() in __netpoll_setup
[ Upstream commit c69c5e10adb903ae2438d4f9c16eccf43d1fcbc1 ] The ndev->npinfo pointer in __netpoll_setup() is RCU-protected but is being accessed directly for a NULL check. While no RCU read lock is held in this context, we should still use proper RCU primitives for consistency and correctness. Replace the direct NULL check with rcu_access_pointer(), which is the appropriate primitive when only checking for NULL without dereferencing the pointer. This function provides the necessary ordering guarantees without requiring RCU read-side protection. Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20241118-netpoll_rcu-v1-1-a1888dcb4a02@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli@kernel.org> |
||
|
Ignat Korchagin
|
157218c461 |
net: inet6: do not leave a dangling sk pointer in inet6_create()
[ Upstream commit 9df99c395d0f55fb444ef39f4d6f194ca437d884 ] sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-8-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli@kernel.org> |
||
|
Ignat Korchagin
|
798d0642ee |
net: inet: do not leave a dangling sk pointer in inet_create()
[ Upstream commit 9365fa510c6f82e3aa550a09d0c5c6b44dbc78ff ] sock_init_data() attaches the allocated sk object to the provided sock object. If inet_create() fails later, the sk object is freed, but the sock object retains the dangling pointer, which may create use-after-free later. Clear the sk pointer in the sock object on error. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-7-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli@kernel.org> |
||
|
Ignat Korchagin
|
ec61ada1fe |
net: ieee802154: do not leave a dangling sk pointer in ieee802154_create()
[ Upstream commit b4fcd63f6ef79c73cafae8cf4a114def5fc3d80d ] sock_init_data() attaches the allocated sk object to the provided sock object. If ieee802154_create() fails later, the allocated sk object is freed, but the dangling pointer remains in the provided sock object, which may allow use-after-free. Clear the sk pointer in the sock object on error. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-6-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli@kernel.org> |
||
|
Ignat Korchagin
|
954dd77c07 |
net: af_can: do not leave a dangling sk pointer in can_create()
[ Upstream commit 811a7ca7320c062e15d0f5b171fe6ad8592d1434 ] On error can_create() frees the allocated sk object, but sock_init_data() has already attached it to the provided sock object. This will leave a dangling sk pointer in the sock object and may cause use-after-free later. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20241014153808.51894-5-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli@kernel.org> |
||
|
Ignat Korchagin
|
7b9f986e0e |
Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create()
[ Upstream commit 7c4f78cdb8e7501e9f92d291a7d956591bf73be9 ] bt_sock_alloc() allocates the sk object and attaches it to the provided sock object. On error l2cap_sock_alloc() frees the sk object, but the dangling pointer is still attached to the sock object, which may create use-after-free in other code. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-3-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli@kernel.org> |
||
|
Ignat Korchagin
|
50987b9f8e |
af_packet: avoid erroring out after sock_init_data() in packet_create()
[ Upstream commit 46f2a11cb82b657fd15bab1c47821b635e03838b ] After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-2-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli@kernel.org> |
||
|
Phil Sutter
|
3d27bdf417 |
netfilter: ipset: Hold module reference while requesting a module
[ Upstream commit 456f010bfaefde84d3390c755eedb1b0a5857c3c ]
User space may unload ip_set.ko while it is itself requesting a set type
backend module, leading to a kernel crash. The race condition may be
provoked by inserting an mdelay() right after the nfnl_unlock() call.
Fixes:
|
||
|
Ivan Solodovnikov
|
82ca771eb5 |
dccp: Fix memory leak in dccp_feat_change_recv
[ Upstream commit 22be4727a8f898442066bcac34f8a1ad0bc72e14 ]
If dccp_feat_push_confirm() fails after new value for SP feature was accepted
without reconciliation ('entry == NULL' branch), memory allocated for that value
with dccp_feat_clone_sp_val() is never freed.
Here is the kmemleak stack for this:
unreferenced object 0xffff88801d4ab488 (size 8):
comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s)
hex dump (first 8 bytes):
01 b4 4a 1d 80 88 ff ff ..J.....
backtrace:
[<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128
[<0000000019b38405>] kmemdup include/linux/string.h:465 [inline]
[<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline]
[<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline]
[<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline]
[<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416
[<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125
[<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650
[<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688
[<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline]
[<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570
[<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111
[<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline]
[<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696
[<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735
[<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865
[<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882
[<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline]
[<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline]
[<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889
[<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
[<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1
Clean up the allocated memory in case of dccp_feat_push_confirm() failure
and bail out with an error reset code.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes:
|
||
|
Jiri Wiesner
|
1cc82af4e0 |
net/ipv6: release expired exception dst cached in socket
[ Upstream commit 3301ab7d5aeb0fe270f73a3d4810c9d1b6a9f045 ]
Dst objects get leaked in ip6_negative_advice() when this function is
executed for an expired IPv6 route located in the exception table. There
are several conditions that must be fulfilled for the leak to occur:
* an ICMPv6 packet indicating a change of the MTU for the path is received,
resulting in an exception dst being created
* a TCP connection that uses the exception dst for routing packets must
start timing out so that TCP begins retransmissions
* after the exception dst expires, the FIB6 garbage collector must not run
before TCP executes ip6_negative_advice() for the expired exception dst
When TCP executes ip6_negative_advice() for an exception dst that has
expired and if no other socket holds a reference to the exception dst, the
refcount of the exception dst is 2, which corresponds to the increment
made by dst_init() and the increment made by the TCP socket for which the
connection is timing out. The refcount made by the socket is never
released. The refcount of the dst is decremented in sk_dst_reset() but
that decrement is counteracted by a dst_hold() intentionally placed just
before the sk_dst_reset() in ip6_negative_advice(). After
ip6_negative_advice() has finished, there is no other object tied to the
dst. The socket lost its reference stored in sk_dst_cache and the dst is
no longer in the exception table. The exception dst becomes a leaked
object.
As a result of this dst leak, an unbalanced refcount is reported for the
loopback device of a net namespace being destroyed under kernels that do
not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"):
unregister_netdevice: waiting for lo to become free. Usage count = 2
Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The
patch that introduced the dst_hold() in ip6_negative_advice() was
92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22
merely refactored the code with regards to the dst refcount so the issue
was present even before 92f1655aa2b22. The bug was introduced in
|
||
|
Dmitry Antipov
|
c51dcf101d |
netfilter: x_tables: fix LED ID check in led_tg_check()
[ Upstream commit 04317f4eb2aad312ad85c1a17ad81fe75f1f9bc7 ]
Syzbot has reported the following BUG detected by KASAN:
BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70
Read of size 1 at addr ffff8881022da0c8 by task repro/5879
...
Call Trace:
<TASK>
dump_stack_lvl+0x241/0x360
? __pfx_dump_stack_lvl+0x10/0x10
? __pfx__printk+0x10/0x10
? _printk+0xd5/0x120
? __virt_addr_valid+0x183/0x530
? __virt_addr_valid+0x183/0x530
print_report+0x169/0x550
? __virt_addr_valid+0x183/0x530
? __virt_addr_valid+0x183/0x530
? __virt_addr_valid+0x45f/0x530
? __phys_addr+0xba/0x170
? strlen+0x58/0x70
kasan_report+0x143/0x180
? strlen+0x58/0x70
strlen+0x58/0x70
kstrdup+0x20/0x80
led_tg_check+0x18b/0x3c0
xt_check_target+0x3bb/0xa40
? __pfx_xt_check_target+0x10/0x10
? stack_depot_save_flags+0x6e4/0x830
? nft_target_init+0x174/0xc30
nft_target_init+0x82d/0xc30
? __pfx_nft_target_init+0x10/0x10
? nf_tables_newrule+0x1609/0x2980
? nf_tables_newrule+0x1609/0x2980
? rcu_is_watching+0x15/0xb0
? nf_tables_newrule+0x1609/0x2980
? nf_tables_newrule+0x1609/0x2980
? __kmalloc_noprof+0x21a/0x400
nf_tables_newrule+0x1860/0x2980
? __pfx_nf_tables_newrule+0x10/0x10
? __nla_parse+0x40/0x60
nfnetlink_rcv+0x14e5/0x2ab0
? __pfx_validate_chain+0x10/0x10
? __pfx_nfnetlink_rcv+0x10/0x10
? __lock_acquire+0x1384/0x2050
? netlink_deliver_tap+0x2e/0x1b0
? __pfx_lock_release+0x10/0x10
? netlink_deliver_tap+0x2e/0x1b0
netlink_unicast+0x7f8/0x990
? __pfx_netlink_unicast+0x10/0x10
? __virt_addr_valid+0x183/0x530
? __check_object_size+0x48e/0x900
netlink_sendmsg+0x8e4/0xcb0
? __pfx_netlink_sendmsg+0x10/0x10
? aa_sock_msg_perm+0x91/0x160
? __pfx_netlink_sendmsg+0x10/0x10
__sock_sendmsg+0x223/0x270
____sys_sendmsg+0x52a/0x7e0
? __pfx_____sys_sendmsg+0x10/0x10
__sys_sendmsg+0x292/0x380
? __pfx___sys_sendmsg+0x10/0x10
? lockdep_hardirqs_on_prepare+0x43d/0x780
? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
? exc_page_fault+0x590/0x8c0
? do_syscall_64+0xb6/0x230
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
Since an invalid (without '\0' byte at all) byte sequence may be passed
from userspace, add an extra check to ensure that such a sequence is
rejected as possible ID and so never passed to 'kstrdup()' and further.
Reported-by: syzbot+6c8215822f35fdb35667@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6c8215822f35fdb35667
Fixes:
|
||
|
Jinghao Jia
|
a1c1de6677 |
ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init()
[ Upstream commit 146b6f1112eb30a19776d6c323c994e9d67790db ]
Under certain kernel configurations when building with Clang/LLVM, the
compiler does not generate a return or jump as the terminator
instruction for ip_vs_protocol_init(), triggering the following objtool
warning during build time:
vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6()
At runtime, this either causes an oops when trying to load the ipvs
module or a boot-time panic if ipvs is built-in. This same issue has
been reported by the Intel kernel test robot previously.
Digging deeper into both LLVM and the kernel code reveals this to be a
undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer
of 64 chars to store the registered protocol names and leaves it
uninitialized after definition. The function calls strnlen() when
concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE
strnlen() performs an extra step to check whether the last byte of the
input char buffer is a null character (commit 3009f891bb9f ("fortify:
Allow strlen() and strnlen() to pass compile-time known lengths")).
This, together with possibly other configurations, cause the following
IR to be generated:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 {
%1 = alloca [64 x i8], align 16
...
14: ; preds = %11
%15 = getelementptr inbounds i8, ptr %1, i64 63
%16 = load i8, ptr %15, align 1
%17 = tail call i1 @llvm.is.constant.i8(i8 %16)
%18 = icmp eq i8 %16, 0
%19 = select i1 %17, i1 %18, i1 false
br i1 %19, label %20, label %23
20: ; preds = %14
%21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23
...
23: ; preds = %14, %11, %20
%24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24
...
}
The above code calculates the address of the last char in the buffer
(value %15) and then loads from it (value %16). Because the buffer is
never initialized, the LLVM GVN pass marks value %16 as undefined:
%13 = getelementptr inbounds i8, ptr %1, i64 63
br i1 undef, label %14, label %17
This gives later passes (SCCP, in particular) more DCE opportunities by
propagating the undef value further, and eventually removes everything
after the load on the uninitialized stack location:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 {
%1 = alloca [64 x i8], align 16
...
12: ; preds = %11
%13 = getelementptr inbounds i8, ptr %1, i64 63
unreachable
}
In this way, the generated native code will just fall through to the
next function, as LLVM does not generate any code for the unreachable IR
instruction and leaves the function without a terminator.
Zero the on-stack buffer to avoid this possible UB.
Fixes:
|
||
|
Calum Mackay
|
53314a63fc |
SUNRPC: correct error code comment in xs_tcp_setup_socket()
[ Upstream commit 8c71139d9f84c1963b0a416941244502a20a7e52 ] This comment was introduced by commit |
||
|
Eric Dumazet
|
707dbbfea7 |
ipmr: convert /proc handlers to rcu_read_lock()
[ Upstream commit b96ef16d2f837870daaea51c38cd50458b95ad5c ] We can use standard rcu_read_lock(), to get rid of last read_lock(&mrt_lock) call points. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: fc9c273d6daa ("ipmr: fix tables suspicious RCU usage") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli@kernel.org> |
||
|
Alex Zenla
|
692eb06703 |
9p/xen: fix release of IRQ
[ Upstream commit e43c608f40c065b30964f0a806348062991b802d ]
Kernel logs indicate an IRQ was double-freed.
Pass correct device ID during IRQ release.
Fixes:
|
||
|
Alex Zenla
|
c9a1f766ab |
9p/xen: fix init sequence
[ Upstream commit 7ef3ae82a6ebbf4750967d1ce43bcdb7e44ff74b ]
Large amount of mount hangs observed during hotplugging of 9pfs devices. The
9pfs Xen driver attempts to initialize itself more than once, causing the
frontend and backend to disagree: the backend listens on a channel that the
frontend does not send on, resulting in stalled processing.
Only allow initialization of 9p frontend once.
Fixes: c15fe55d14b3b ("9p/xen: fix connection sequence")
Signed-off-by: Alex Zenla <alex@edera.dev>
Signed-off-by: Alexander Merritt <alexander@edera.dev>
Signed-off-by: Ariadne Conill <ariadne@ariadne.space>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241119211633.38321-1-alexander@edera.dev>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
||
|
Jeongjun Park
|
3c20b5948f |
netfilter: ipset: add missing range check in bitmap_ip_uadt
commit 35f56c554eb1b56b77b3cf197a6b00922d49033d upstream.
When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists,
the values of ip and ip_to are slightly swapped. Therefore, the range check
for ip should be done later, but this part is missing and it seems that the
vulnerability occurs.
So we should add missing range checks and remove unnecessary range checks.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+58c872f7790a4d2ac951@syzkaller.appspotmail.com
Fixes:
|
||
|
Andrej ShaduraandAleksei Vetrov
|
38c54efd11 |
Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}()
commit 5fe6caa62b07fd39cd6a28acc8f92ba2955e11a6 upstream.
Commit 9bf4e919ccad worked around an issue introduced after an innocuous
optimisation change in LLVM main:
> len is defined as an 'int' because it is assigned from
> '__user int *optlen'. However, it is clamped against the result of
> sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
> platforms). This is done with min_t() because min() requires compatible
> types, which results in both len and the result of sizeof() being casted
> to 'unsigned int', meaning len changes signs and the result of sizeof()
> is truncated. From there, len is passed to copy_to_user(), which has a
> third parameter type of 'unsigned long', so it is widened and changes
> signs again. This excessive casting in combination with the KCSAN
> instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
> call, failing the build.
The same issue occurs in rfcomm in functions rfcomm_sock_getsockopt and
rfcomm_sock_getsockopt_old.
Change the type of len to size_t in both rfcomm_sock_getsockopt and
rfcomm_sock_getsockopt_old and replace min_t() with min().
Cc: stable@vger.kernel.org
Co-authored-by: Aleksei Vetrov <vvvvvv@google.com>
Improves: 9bf4e919ccad ("Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()")
Link: https://github.com/ClangBuiltLinux/linux/issues/2007
Link: https://github.com/llvm/llvm-project/issues/85647
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Mingwei Zheng
|
0868402191 |
net: rfkill: gpio: Add check for clk_enable()
[ Upstream commit 8251e7621b25ccdb689f1dd9553b8789e3745ea1 ]
Add check for the return value of clk_enable() to catch the potential
error.
Fixes:
|
||
|
Ben Greear
|
cc1ecdd66d |
mac80211: fix user-power when emulating chanctx
[ Upstream commit 9b15c6cf8d2e82c8427cd06f535d8de93b5b995c ] ieee80211_calc_hw_conf_chan was ignoring the configured user_txpower. If it is set, use it to potentially decrease txpower as requested. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://patch.msgid.link/20241010203954.1219686-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Jakub Kicinski
|
114a61d8d9 |
netlink: terminate outstanding dump on socket close
[ Upstream commit 1904fb9ebf911441f90a68e96b22aa73e4410505 ]
Netlink supports iterative dumping of data. It provides the families
the following ops:
- start - (optional) kicks off the dumping process
- dump - actual dump helper, keeps getting called until it returns 0
- done - (optional) pairs with .start, can be used for cleanup
The whole process is asynchronous and the repeated calls to .dump
don't actually happen in a tight loop, but rather are triggered
in response to recvmsg() on the socket.
This gives the user full control over the dump, but also means that
the user can close the socket without getting to the end of the dump.
To make sure .start is always paired with .done we check if there
is an ongoing dump before freeing the socket, and if so call .done.
The complication is that sockets can get freed from BH and .done
is allowed to sleep. So we use a workqueue to defer the call, when
needed.
Unfortunately this does not work correctly. What we defer is not
the cleanup but rather releasing a reference on the socket.
We have no guarantee that we own the last reference, if someone
else holds the socket they may release it in BH and we're back
to square one.
The whole dance, however, appears to be unnecessary. Only the user
can interact with dumps, so we can clean up when socket is closed.
And close always happens in process context. Some async code may
still access the socket after close, queue notification skbs to it etc.
but no dumps can start, end or otherwise make progress.
Delete the workqueue and flush the dump state directly from the release
handler. Note that further cleanup is possible in -next, for instance
we now always call .done before releasing the main module reference,
so dump doesn't have to take a reference of its own.
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes:
|
||
|
Linus Torvalds
|
537eaedf21 |
9p: fix slab cache name creation for real
commit a360f311f57a36e96d88fa8086b749159714dcd2 upstream. This was attempted by using the dev_name in the slab cache name, but as Omar Sandoval pointed out, that can be an arbitrary string, eg something like "/dev/root". Which in turn trips verify_dirent_name(), which fails if a filename contains a slash. So just make it use a sequence counter, and make it an atomic_t to avoid any possible races or locking issues. Reported-and-tested-by: Omar Sandoval <osandov@fb.com> Link: https://lore.kernel.org/all/ZxafcO8KWMlXaeWE@telecaster.dhcp.thefacebook.com/ Fixes: 79efebae4afc ("9p: Avoid creating multiple slab caches with the same name") Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Pedro Falcato
|
e421f42395 |
9p: Avoid creating multiple slab caches with the same name
[ Upstream commit 79efebae4afc2221fa814c3cae001bede66ab259 ] In the spirit of [1], avoid creating multiple slab caches with the same name. Instead, add the dev_name into the mix. [1]: https://lore.kernel.org/all/20240807090746.2146479-1-pedro.falcato@gmail.com/ Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com> Reported-by: syzbot+3c5d43e97993e1fa612b@syzkaller.appspotmail.com Message-ID: <20240807094725.2193423-1-pedro.falcato@gmail.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Hyunwoo Kim
|
5f092a4271 |
vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
commit 6ca575374dd9a507cdd16dfa0e78c2e9e20bd05f upstream.
During loopback communication, a dangling pointer can be created in
vsk->trans, potentially leading to a Use-After-Free condition. This
issue is resolved by initializing vsk->trans to NULL.
Cc: stable <stable@kernel.org>
Fixes:
|
||
|
Hyunwoo Kim
|
285266ef92 |
hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer
commit e629295bd60abf4da1db85b82819ca6a4f6c1e79 upstream. When hvs is released, there is a possibility that vsk->trans may not be initialized to NULL, which could lead to a dangling pointer. This issue is resolved by initializing vsk->trans to NULL. Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/Zys4hCj61V+mQfX2@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Nikolay Aleksandrov
|
3e01fc3c66 |
net: bridge: xmit: make sure we have at least eth header len bytes
commit 8bd67ebb50c0145fd2ca8681ab65eb7e8cde1afc upstream.
syzbot triggered an uninit value[1] error in bridge device's xmit path
by sending a short (less than ETH_HLEN bytes) skb. To fix it check if
we can actually pull that amount instead of assuming.
Tested with dropwatch:
drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3)
origin: software
timestamp: Mon May 13 11:31:53 2024 778214037 nsec
protocol: 0x88a8
length: 2
original length: 2
drop reason: PKT_TOO_SMALL
[1]
BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65
br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
__dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
__bpf_tx_skb net/core/filter.c:2136 [inline]
__bpf_redirect_common net/core/filter.c:2180 [inline]
__bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187
____bpf_clone_redirect net/core/filter.c:2460 [inline]
bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432
___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997
__bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238
bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline]
__bpf_prog_run include/linux/filter.h:657 [inline]
bpf_prog_run include/linux/filter.h:664 [inline]
bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425
bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058
bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269
__sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678
__do_sys_bpf kernel/bpf/syscall.c:5767 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5765 [inline]
__x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765
x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes:
|
||
|
Xin Long
|
67b9a278b8 |
sctp: properly validate chunk size in sctp_sf_ootb()
[ Upstream commit 0ead60804b64f5bd6999eec88e503c6a1a242d41 ]
A size validation fix similar to that in Commit 50619dbf8db7 ("sctp: add
size validation when walking chunks") is also required in sctp_sf_ootb()
to address a crash reported by syzbot:
BUG: KMSAN: uninit-value in sctp_sf_ootb+0x7f5/0xce0 net/sctp/sm_statefuns.c:3712
sctp_sf_ootb+0x7f5/0xce0 net/sctp/sm_statefuns.c:3712
sctp_do_sm+0x181/0x93d0 net/sctp/sm_sideeffect.c:1166
sctp_endpoint_bh_rcv+0xc38/0xf90 net/sctp/endpointola.c:407
sctp_inq_push+0x2ef/0x380 net/sctp/inqueue.c:88
sctp_rcv+0x3831/0x3b20 net/sctp/input.c:243
sctp4_rcv+0x42/0x50 net/sctp/protocol.c:1159
ip_protocol_deliver_rcu+0xb51/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233
Reported-by: syzbot+f0cbb34d39392f2746ca@syzkaller.appspotmail.com
Fixes:
|
||
|
Felix Fietkau
|
b0b862aa3d |
wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower
commit 393b6bc174b0dd21bb2a36c13b36e62fc3474a23 upstream.
Avoid potentially crashing in the driver because of uninitialized private data
Fixes:
|
||
|
Pablo Neira Ayuso
|
a661ed364a |
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
[ Upstream commit d5953d680f7e96208c29ce4139a0e38de87a57fe ]
If access to offset + length is larger than the skbuff length, then
skb_checksum() triggers BUG_ON().
skb_checksum() internally subtracts the length parameter while iterating
over skbuff, BUG_ON(len) at the end of it checks that the expected
length to be included in the checksum calculation is fully consumed.
Fixes:
|
||
|
Benoît Monin
|
bcefc3cd7f |
net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
[ Upstream commit 04c20a9356f283da623903e81e7c6d5df7e4dc3c ]
As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability
can only checksum TCP and UDP over IPv6 if the IP header does not
contains extension.
This is enforced for UDP packets emitted from user-space to an IPv6
address as they go through ip6_make_skb(), which calls
__ip6_append_data() where a check is done on the header size before
setting CHECKSUM_PARTIAL.
But the introduction of UDP encapsulation with fou6 added a code-path
where it is possible to get an skb with a partial UDP checksum and an
IPv6 header with extension:
* fou6 adds a UDP header with a partial checksum if the inner packet
does not contains a valid checksum.
* ip6_tunnel adds an IPv6 header with a destination option extension
header if encap_limit is non-zero (the default value is 4).
The thread linked below describes in more details how to reproduce the
problem with GRE-in-UDP tunnel.
Add a check on the network header size in skb_csum_hwoffload_help() to
make sure no IPv6 packet with extension header is handed to a network
device with NETIF_F_IPV6_CSUM capability.
Link: https://lore.kernel.org/netdev/26548921.1r3eYUQgxm@benoit.monin/T/#u
Fixes:
|
||
|
Xin Long
|
2c88668d57 |
net: support ip generic csum processing in skb_csum_hwoffload_help
[ Upstream commit 62fafcd63139920eb25b3fbf154177ce3e6f3232 ]
NETIF_F_IP|IPV6_CSUM feature flag indicates UDP and TCP csum offload
while NETIF_F_HW_CSUM feature flag indicates ip generic csum offload
for HW, which includes not only for TCP/UDP csum, but also for other
protocols' csum like GRE's.
However, in skb_csum_hwoffload_help() it only checks features against
NETIF_F_CSUM_MASK(NETIF_F_HW|IP|IPV6_CSUM). So if it's a non TCP/UDP
packet and the features doesn't support NETIF_F_HW_CSUM, but supports
NETIF_F_IP|IPV6_CSUM only, it would still return 0 and leave the HW
to do csum.
This patch is to support ip generic csum processing by checking
NETIF_F_HW_CSUM for all protocols, and check (NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM) only for TCP and UDP.
Note that we're using skb->csum_offset to check if it's a TCP/UDP
proctol, this might be fragile. However, as Alex said, for now we
only have a few L4 protocols that are requesting Tx csum offload,
we'd better fix this until a new protocol comes with a same csum
offset.
v1->v2:
- not extend skb->csum_not_inet, but use skb->csum_offset to tell
if it's an UDP/TCP csum packet.
v2->v3:
- add a note in the changelog, as Willem suggested.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 04c20a9356f2 ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
||
|
Pedro Tammela
|
e7f9a6f97e |
net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT
[ Upstream commit 2e95c4384438adeaa772caa560244b1a2efef816 ] In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed to be either root or ingress. This assumption is bogus since it's valid to create egress qdiscs with major handle ffff: Budimir Markovic found that for qdiscs like DRR that maintain an active class list, it will cause a UAF with a dangling class pointer. In |
||
|
Felix Fietkau
|
c9cf951097 |
wifi: mac80211: skip non-uploaded keys in ieee80211_iter_keys
[ Upstream commit 52009b419355195912a628d0a9847922e90c348c ]
Sync iterator conditions with ieee80211_iter_keys_rcu.
Fixes:
|
||
|
Sabrina Dubroca
|
f31398570a |
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
[ Upstream commit 3f0ab59e6537c6a8f9e1b355b48f9c05a76e8563 ] This expands the validation introduced in commit |
||
|
Ye Bin
|
e232728242 |
Bluetooth: bnep: fix wild-memory-access in proto_unregister
[ Upstream commit 64a90991ba8d4e32e3173ddd83d0b24167a5668c ]
There's issue as follows:
KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f]
CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W
RIP: 0010:proto_unregister+0xee/0x400
Call Trace:
<TASK>
__do_sys_delete_module+0x318/0x580
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init()
will cleanup all resource. Then when remove bnep module will call
bnep_sock_cleanup() to cleanup sock's resource.
To solve above issue just return bnep_sock_init()'s return value in
bnep_exit().
Fixes:
|
||
|
Aaron Thompson
|
9010d2cace |
Bluetooth: Remove debugfs directory on module init failure
commit 1db4564f101b47188c1b71696bd342ef09172b22 upstream.
If bt_init() fails, the debugfs directory currently is not removed. If
the module is loaded again after that, the debugfs directory is not set
up properly due to the existing directory.
# modprobe bluetooth
# ls -laF /sys/kernel/debug/bluetooth
total 0
drwxr-xr-x 2 root root 0 Sep 27 14:26 ./
drwx------ 31 root root 0 Sep 27 14:25 ../
-r--r--r-- 1 root root 0 Sep 27 14:26 l2cap
-r--r--r-- 1 root root 0 Sep 27 14:26 sco
# modprobe -r bluetooth
# ls -laF /sys/kernel/debug/bluetooth
ls: cannot access '/sys/kernel/debug/bluetooth': No such file or directory
#
# modprobe bluetooth
modprobe: ERROR: could not insert 'bluetooth': Invalid argument
# dmesg | tail -n 6
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Faking l2cap_init() failure for testing
NET: Unregistered PF_BLUETOOTH protocol family
# ls -laF /sys/kernel/debug/bluetooth
total 0
drwxr-xr-x 2 root root 0 Sep 27 14:31 ./
drwx------ 31 root root 0 Sep 27 14:26 ../
#
# modprobe bluetooth
# dmesg | tail -n 7
Bluetooth: Core ver 2.22
debugfs: Directory 'bluetooth' with parent '/' already present!
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
# ls -laF /sys/kernel/debug/bluetooth
total 0
drwxr-xr-x 2 root root 0 Sep 27 14:31 ./
drwx------ 31 root root 0 Sep 27 14:26 ../
#
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Anastasia Kovaleva
|
464801a0f6 |
net: Fix an unsafe loop on the list
commit 1dae9f1187189bc09ff6d25ca97ead711f7e26f9 upstream.
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list.
Fixes:
|
||
|
j.nixdorf@avm.de
|
2488891536 |
net: ipv6: ensure we call ipv6_mc_down() at most once
commit 9995b408f17ff8c7f11bc725c8aa225ba3a63b1c upstream.
There are two reasons for addrconf_notify() to be called with NETDEV_DOWN:
either the network device is actually going down, or IPv6 was disabled
on the interface.
If either of them stays down while the other is toggled, we repeatedly
call the code for NETDEV_DOWN, including ipv6_mc_down(), while never
calling the corresponding ipv6_mc_up() in between. This will cause a
new entry in idev->mc_tomb to be allocated for each multicast group
the interface is subscribed to, which in turn leaks one struct ifmcaddr6
per nontrivial multicast group the interface is subscribed to.
The following reproducer will leak at least $n objects:
ip addr add ff2e::4242/32 dev eth0 autojoin
sysctl -w net.ipv6.conf.eth0.disable_ipv6=1
for i in $(seq 1 $n); do
ip link set up eth0; ip link set down eth0
done
Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the
sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2)
can also be used to create a nontrivial idev->mc_list, which will the
leak objects with the right up-down-sequence.
Based on both sources for NETDEV_DOWN events the interface IPv6 state
should be considered:
- not ready if the network interface is not ready OR IPv6 is disabled
for it
- ready if the network interface is ready AND IPv6 is enabled for it
The functions ipv6_mc_up() and ipv6_down() should only be run when this
state changes.
Implement this by remembering when the IPv6 state is ready, and only
run ipv6_mc_down() if it actually changed from ready to not ready.
The other direction (not ready -> ready) already works correctly, as:
- the interface notification triggered codepath for NETDEV_UP /
NETDEV_CHANGE returns early if ipv6 is disabled, and
- the disable_ipv6=0 triggered codepath skips fully initializing the
interface as long as addrconf_link_ready(dev) returns false
- calling ipv6_mc_up() repeatedly does not leak anything
Fixes:
|
||
|
Luiz Augusto von Dentz
|
b77b3fb12f |
Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change
[ Upstream commit 08d1914293dae38350b8088980e59fbc699a72fe ]
rfcomm_sk_state_change attempts to use sock_lock so it must never be
called with it locked but rfcomm_sock_ioctl always attempt to lock it
causing the following trace:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted
------------------------------------------------------
syz-executor386/5093 is trying to acquire lock:
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline]
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73
but task is already holding lock:
ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491
Reported-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com
Tested-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218
Fixes:
|
||
|
Andy Roulin
|
f07131239a |
netfilter: br_netfilter: fix panic with metadata_dst skb
[ Upstream commit f9ff7665cd128012868098bbd07e28993e314fdb ]
Fix a kernel panic in the br_netfilter module when sending untagged
traffic via a VxLAN device.
This happens during the check for fragmentation in br_nf_dev_queue_xmit.
It is dependent on:
1) the br_netfilter module being loaded;
2) net.bridge.bridge-nf-call-iptables set to 1;
3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port;
4) untagged frames with size higher than the VxLAN MTU forwarded/flooded
When forwarding the untagged packet to the VxLAN bridge port, before
the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and
changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type
of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL.
Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check
for frames that needs to be fragmented: frames with higher MTU than the
VxLAN device end up calling br_nf_ip_fragment, which in turns call
ip_skb_dst_mtu.
The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst
with valid dst->dev, thus the crash.
This case was never supported in the first place, so drop the packet
instead.
PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data.
[ 176.291791] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000110
[ 176.292101] Mem abort info:
[ 176.292184] ESR = 0x0000000096000004
[ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits
[ 176.292530] SET = 0, FnV = 0
[ 176.292709] EA = 0, S1PTW = 0
[ 176.292862] FSC = 0x04: level 0 translation fault
[ 176.293013] Data abort info:
[ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000
[ 176.294166] [0000000000000110] pgd=0000000000000000,
p4d=0000000000000000
[ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth
br_netfilter bridge stp llc ipv6 crct10dif_ce
[ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted
6.8.0-rc3-g5b3fbd61b9d1 #2
[ 176.296314] Hardware name: linux,dummy-virt (DT)
[ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter]
[ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter]
[ 176.297636] sp : ffff800080003630
[ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27:
ffff6828c49ad9f8
[ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24:
00000000000003e8
[ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21:
ffff6828c3b16d28
[ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18:
0000000000000014
[ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15:
0000000095744632
[ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12:
ffffb7e137926a70
[ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 :
0000000000000000
[ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 :
f20e0100bebafeca
[ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 :
0000000000000000
[ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 :
ffff6828c7f918f0
[ 176.300889] Call trace:
[ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter]
[ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter]
[ 176.301703] nf_hook_slow+0x48/0x124
[ 176.302060] br_forward_finish+0xc8/0xe8 [bridge]
[ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter]
[ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter]
[ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter]
[ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter]
[ 176.303359] nf_hook_slow+0x48/0x124
[ 176.303803] __br_forward+0xc4/0x194 [bridge]
[ 176.304013] br_flood+0xd4/0x168 [bridge]
[ 176.304300] br_handle_frame_finish+0x1d4/0x5c4 [bridge]
[ 176.304536] br_nf_hook_thresh+0x124/0x134 [br_netfilter]
[ 176.304978] br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter]
[ 176.305188] br_nf_pre_routing+0x250/0x524 [br_netfilter]
[ 176.305428] br_handle_frame+0x244/0x3cc [bridge]
[ 176.305695] __netif_receive_skb_core.constprop.0+0x33c/0xecc
[ 176.306080] __netif_receive_skb_one_core+0x40/0x8c
[ 176.306197] __netif_receive_skb+0x18/0x64
[ 176.306369] process_backlog+0x80/0x124
[ 176.306540] __napi_poll+0x38/0x17c
[ 176.306636] net_rx_action+0x124/0x26c
[ 176.306758] __do_softirq+0x100/0x26c
[ 176.307051] ____do_softirq+0x10/0x1c
[ 176.307162] call_on_irq_stack+0x24/0x4c
[ 176.307289] do_softirq_own_stack+0x1c/0x2c
[ 176.307396] do_softirq+0x54/0x6c
[ 176.307485] __local_bh_enable_ip+0x8c/0x98
[ 176.307637] __dev_queue_xmit+0x22c/0xd28
[ 176.307775] neigh_resolve_output+0xf4/0x1a0
[ 176.308018] ip_finish_output2+0x1c8/0x628
[ 176.308137] ip_do_fragment+0x5b4/0x658
[ 176.308279] ip_fragment.constprop.0+0x48/0xec
[ 176.308420] __ip_finish_output+0xa4/0x254
[ 176.308593] ip_finish_output+0x34/0x130
[ 176.308814] ip_output+0x6c/0x108
[ 176.308929] ip_send_skb+0x50/0xf0
[ 176.309095] ip_push_pending_frames+0x30/0x54
[ 176.309254] raw_sendmsg+0x758/0xaec
[ 176.309568] inet_sendmsg+0x44/0x70
[ 176.309667] __sys_sendto+0x110/0x178
[ 176.309758] __arm64_sys_sendto+0x28/0x38
[ 176.309918] invoke_syscall+0x48/0x110
[ 176.310211] el0_svc_common.constprop.0+0x40/0xe0
[ 176.310353] do_el0_svc+0x1c/0x28
[ 176.310434] el0_svc+0x34/0xb4
[ 176.310551] el0t_64_sync_handler+0x120/0x12c
[ 176.310690] el0t_64_sync+0x190/0x194
[ 176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860)
[ 176.315743] ---[ end trace 0000000000000000 ]---
[ 176.316060] Kernel panic - not syncing: Oops: Fatal exception in
interrupt
[ 176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000
[ 176.316564] PHYS_OFFSET: 0xffff97d780000000
[ 176.316782] CPU features: 0x0,88000203,3c020000,0100421b
[ 176.317210] Memory Limit: none
[ 176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal
Exception in interrupt ]---\
Fixes:
|
||
|
Neal Cardwell
|
a58878d710 |
tcp: fix tcp_enter_recovery() to zero retrans_stamp when it's safe
[ Upstream commit b41b4cbd9655bcebcce941bef3601db8110335be ]
Fix tcp_enter_recovery() so that if there are no retransmits out then
we zero retrans_stamp when entering fast recovery. This is necessary
to fix two buggy behaviors.
Currently a non-zero retrans_stamp value can persist across multiple
back-to-back loss recovery episodes. This is because we generally only
clears retrans_stamp if we are completely done with loss recoveries,
and get to tcp_try_to_open() and find !tcp_any_retrans_done(sk). This
behavior causes two bugs:
(1) When a loss recovery episode (CA_Loss or CA_Recovery) is followed
immediately by a new CA_Recovery, the retrans_stamp value can persist
and can be a time before this new CA_Recovery episode starts. That
means that timestamp-based undo will be using the wrong retrans_stamp
(a value that is too old) when comparing incoming TS ecr values to
retrans_stamp to see if the current fast recovery episode can be
undone.
(2) If there is a roughly minutes-long sequence of back-to-back fast
recovery episodes, one after another (e.g. in a shallow-buffered or
policed bottleneck), where each fast recovery successfully makes
forward progress and recovers one window of sequence space (but leaves
at least one retransmit in flight at the end of the recovery),
followed by several RTOs, then the ETIMEDOUT check may be using the
wrong retrans_stamp (a value set at the start of the first fast
recovery in the sequence). This can cause a very premature ETIMEDOUT,
killing the connection prematurely.
This commit changes the code to zero retrans_stamp when entering fast
recovery, when this is known to be safe (no retransmits are out in the
network). That ensures that when starting a fast recovery episode, and
it is safe to do so, retrans_stamp is set when we send the fast
retransmit packet. That addresses both bug (1) and bug (2) by ensuring
that (if no retransmits are out when we start a fast recovery) we use
the initial fast retransmit of this fast recovery as the time value
for undo and ETIMEDOUT calculations.
This makes intuitive sense, since the start of a new fast recovery
episode (in a scenario where no lost packets are out in the network)
means that the connection has made forward progress since the last RTO
or fast recovery, and we should thus "restart the clock" used for both
undo and ETIMEDOUT logic.
Note that if when we start fast recovery there *are* retransmits out
in the network, there can still be undesirable (1)/(2) issues. For
example, after this patch we can still have the (1) and (2) problems
in cases like this:
+ round 1: sender sends flight 1
+ round 2: sender receives SACKs and enters fast recovery 1,
retransmits some packets in flight 1 and then sends some new data as
flight 2
+ round 3: sender receives some SACKs for flight 2, notes losses, and
retransmits some packets to fill the holes in flight 2
+ fast recovery has some lost retransmits in flight 1 and continues
for one or more rounds sending retransmits for flight 1 and flight 2
+ fast recovery 1 completes when snd_una reaches high_seq at end of
flight 1
+ there are still holes in the SACK scoreboard in flight 2, so we
enter fast recovery 2, but some retransmits in the flight 2 sequence
range are still in flight (retrans_out > 0), so we can't execute the
new retrans_stamp=0 added here to clear retrans_stamp
It's not yet clear how to fix these remaining (1)/(2) issues in an
efficient way without breaking undo behavior, given that retrans_stamp
is currently used for undo and ETIMEDOUT. Perhaps the optimal (but
expensive) strategy would be to set retrans_stamp to the timestamp of
the earliest outstanding retransmit when entering fast recovery. But
at least this commit makes things better.
Note that this does not change the semantics of retrans_stamp; it
simply makes retrans_stamp accurate in some cases where it was not
before:
(1) Some loss recovery, followed by an immediate entry into a fast
recovery, where there are no retransmits out when entering the fast
recovery.
(2) When a TFO server has a SYNACK retransmit that sets retrans_stamp,
and then the ACK that completes the 3-way handshake has SACK blocks
that trigger a fast recovery. In this case when entering fast recovery
we want to zero out the retrans_stamp from the TFO SYNACK retransmit,
and set the retrans_stamp based on the timestamp of the fast recovery.
We introduce a tcp_retrans_stamp_cleanup() helper, because this
two-line sequence already appears in 3 places and is about to appear
in 2 more as a result of this bug fix patch series. Once this bug fix
patches series in the net branch makes it into the net-next branch
we'll update the 3 other call sites to use the new helper.
This is a long-standing issue. The Fixes tag below is chosen to be the
oldest commit at which the patch will apply cleanly, which is from
Linux v3.5 in 2012.
Fixes:
|
||
|
Jason Xing
|
09e4ae353c |
tcp: avoid reusing FIN_WAIT2 when trying to find port in connect() process
[ Upstream commit 0d9e5df4a257afc3a471a82961ace9a22b88295a ] We found that one close-wait socket was reset by the other side due to a new connection reusing the same port which is beyond our expectation, so we have to investigate the underlying reason. The following experiment is conducted in the test environment. We limit the port range from 40000 to 40010 and delay the time to close() after receiving a fin from the active close side, which can help us easily reproduce like what happened in production. Here are three connections captured by tcpdump: 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965525191 127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 2769915070 127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1 127.0.0.1.40002 > 127.0.0.1.9999: Flags [F.], seq 1, ack 1 // a few seconds later, within 60 seconds 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730 127.0.0.1.9999 > 127.0.0.1.40002: Flags [.], ack 2 127.0.0.1.40002 > 127.0.0.1.9999: Flags [R], seq 2965525193 // later, very quickly 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730 127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 3120990805 127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1 As we can see, the first flow is reset because: 1) client starts a new connection, I mean, the second one 2) client tries to find a suitable port which is a timewait socket (its state is timewait, substate is fin_wait2) 3) client occupies that timewait port to send a SYN 4) server finds a corresponding close-wait socket in ehash table, then replies with a challenge ack 5) client sends an RST to terminate this old close-wait socket. I don't think the port selection algo can choose a FIN_WAIT2 socket when we turn on tcp_tw_reuse because on the server side there remain unread data. In some cases, if one side haven't call close() yet, we should not consider it as expendable and treat it at will. Even though, sometimes, the server isn't able to call close() as soon as possible like what we expect, it can not be terminated easily, especially due to a second unrelated connection happening. After this patch, we can see the expected failure if we start a connection when all the ports are occupied in fin_wait2 state: "Ncat: Cannot assign requested address." Reported-by: Jade Dong <jadedong@tencent.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240823001152.31004-1-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Ido Schimmel
|
05905659e2 |
ipv4: Mask upper DSCP bits and ECN bits in NETLINK_FIB_LOOKUP family
[ Upstream commit 8fed54758cd248cd311a2b5c1e180abef1866237 ] The NETLINK_FIB_LOOKUP netlink family can be used to perform a FIB lookup according to user provided parameters and communicate the result back to user space. However, unlike other users of the FIB lookup API, the upper DSCP bits and the ECN bits of the DS field are not masked, which can result in the wrong result being returned. Solve this by masking the upper DSCP bits and the ECN bits using IPTOS_RT_MASK. The structure that communicates the request and the response is not exported to user space, so it is unlikely that this netlink family is actually in use [1]. [1] https://lore.kernel.org/netdev/ZpqpB8vJU%2FQ6LSqa@debian/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Kuniyuki Iwashima
|
098a9b686d |
ipv4: Check !in_dev earlier for ioctl(SIOCSIFADDR).
[ Upstream commit e3af3d3c5b26c33a7950e34e137584f6056c4319 ] dev->ip_ptr could be NULL if we set an invalid MTU. Even then, if we issue ioctl(SIOCSIFADDR) for a new IPv4 address, devinet_ioctl() allocates struct in_ifaddr and fails later in inet_set_ifa() because in_dev is NULL. Let's move the check earlier. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240809235406.50187-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Simon Horman
|
8298b6e45f |
tipc: guard against string buffer overrun
[ Upstream commit 6555a2a9212be6983d2319d65276484f7c5f431a ]
Smatch reports that copying media_name and if_name to name_parts may
overwrite the destination.
.../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16)
.../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16)
This does seem to be the case so guard against this possibility by using
strscpy() and failing if truncation occurs.
Introduced by commit
|
||
|
Xin Long
|
89bbead9d8 |
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
[ Upstream commit 8beee4d8dee76b67c75dc91fd8185d91e845c160 ]
In sctp_listen_start() invoked by sctp_inet_listen(), it should set the
sk_state back to CLOSED if sctp_autobind() fails due to whatever reason.
Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse
is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will
be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash
is NULL.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617
Call Trace:
<TASK>
__sys_listen_socket net/socket.c:1883 [inline]
__sys_listen+0x1b7/0x230 net/socket.c:1894
__do_sys_listen net/socket.c:1902 [inline]
Fixes:
|
||
|
Anton Danilov
|
7166927b1f |
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
[ Upstream commit c4a14f6d9d17ad1e41a36182dd3b8a5fd91efbd7 ]
Regression Description:
Depending on the options specified for the GRE tunnel device, small
packets may be dropped. This occurs because the pskb_network_may_pull
function fails due to the packet's insufficient length.
For example, if only the okey option is specified for the tunnel device,
original (before encapsulation) packets smaller than 28 bytes (including
the IPv4 header) will be dropped. This happens because the required
length is calculated relative to the network header, not the skb->head.
Here is how the required length is computed and checked:
* The pull_len variable is set to 28 bytes, consisting of:
* IPv4 header: 20 bytes
* GRE header with Key field: 8 bytes
* The pskb_network_may_pull function adds the network offset, shifting
the checkable space further to the beginning of the network header and
extending it to the beginning of the packet. As a result, the end of
the checkable space occurs beyond the actual end of the packet.
Instead of ensuring that 28 bytes are present in skb->head, the function
is requesting these 28 bytes starting from the network header. For small
packets, this requested length exceeds the actual packet size, causing
the check to fail and the packets to be dropped.
This issue affects both locally originated and forwarded packets in
DMVPN-like setups.
How to reproduce (for local originated packets):
ip link add dev gre1 type gre ikey 1.9.8.4 okey 1.9.8.4 \
local <your-ip> remote 0.0.0.0
ip link set mtu 1400 dev gre1
ip link set up dev gre1
ip address add 192.168.13.1/24 dev gre1
ip neighbor add 192.168.13.2 lladdr <remote-ip> dev gre1
ping -s 1374 -c 10 192.168.13.2
tcpdump -vni gre1
tcpdump -vni <your-ext-iface> 'ip proto 47'
ip -s -s -d link show dev gre1
Solution:
Use the pskb_may_pull function instead the pskb_network_may_pull.
Fixes: 80d875cfc9d3 ("ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()")
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240924235158.106062-1-littlesmilingcloud@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|