Add bus id's and ACTLR settings for SMMU on Lito. Bus id's enables the
clock between two nodes and actlr is used for performance tuning.
Change-Id: I3a3ccd018434e0016873843935f2607e12d02a07
Add status property to the device tree, to dynamically
enable or disable fastrpc and adsprpc-mem node.
Change-Id: If9c17d00a691713f6ed958af790401c1308cc6e6
Acked-by: Vishnu Karthik D <vikarthi@qti.qualcomm.com>
Proxy bus client is required to ensure that a certain
minimum state for a critical resource at the beginning
of boot up before the clients have probed and voted for
required state.
Change-Id: Iaa0ec10e528900311dfbc630651c78d57aade1ea
APPS wakeup irq should register to PDC interrupts instead
of GIC for PDC to wakeup APPS when the interrupt is triggered
on lito target.
Change-Id: Id31d5e5303ec0dfe393cf83274191c82889ca752
Introduce governor that keeps SNOC/CNOC alive with a very small
bandwidth vote while CPU is active.
Change-Id: I5d9bf5a74666cbe3afff6a043340737e8986b591
- qcom,mdss-dsi-panel-mode-switch to enable panel operating mode switch.
- qcom,mdss-dsi-video-mode to indicate current timing mode can only
support video mode.
- qcom,mdss-dsi-cmd-mode to indicate current timing mode can only
support command mode.
Change-Id: I0e559a921ed6a59deab3aeb805d2aa70acf75b4a
Add AOP ON/OFF notifications to lpass and cdsp PIL nodes for
considering direct resource voters at rpmh.
Change-Id: Iaaaf1c1f3c3bea942f80ed2d5dd3b67471149d1f
Add apr tal rpmsg node to increase number of glink intents
instead of having the default intent count.
Change-Id: I262ebf842e705a91993cca668ab43de16526bdb5
The upwake IRQ for NPU BWMON device seems to be
incorrect. Fix the IRQ number for NPU BWMON device.
Change-Id: Ic14b7ed11d24d362c58c94df200904976d04fc1e
Support the configuration of the die temperature threshold on SMB1390
that would trigger the TEMP alarm.
Change-Id: Ic542b89675bf05b2d0ee2389c5dfd851f6bbe7bf
Add parameter to set the timeout duration of the WDOG snarl timer. The
wdog-snarl IRQ is disabled, both by default as well as if at least one
of the following two conditions are not satisfied:
- WDOG snarl timer timeout is configured using the parameter being added
in this patch, and
- SW thermal regulation workaround is active.
Change-Id: Iffe2122d3ce3a35eda9543d2ecd88c4b56e9cb31
Add support to read battery id from ADC channel if specified with
batt_id name under FG device. Also, add a property to specify the
pull up resistor value.
Change-Id: I2d089ab5c4a1363846d6a1f014ba2ea55a666989
PMI632 PON OCV is dependent on the primary PMIC it is
paired with. Add a DT property to force using S7 based
OCV instead of the multi-level PON OCV logic.
Change-Id: Idd27a3c31f7422af931a07434b4c64fbd59e1ae9
Add support to loosen capacity learning qualifying criterion.
This helps to learn capacity from any starting battery SOC to
any ending battery SOC, provided, battery SOC changes by at least
10 % during charging. Assign weight to this capacity learning
event based on the change in battery SOC.
Change-Id: I3cdf7d6fe8d53f5b96aab4fad6b7bc293cf523c7
This change adds the extcon support for removable UFS card and SD card on
Kona platforms to enable hot plug detection for the both.
Change-Id: I31833211a7559f3dcd110adc9722982033cfe83b
This change adds the removable UFS device related nodes and properties to
Kona device trees to support UFS cards on Kona platforms.
Change-Id: I04d92c1fa0066d2f50b8492cf516ad6cc4857d17
Add apr tal rpmsg node to increase number of glink
intents instead of having the default intent count.
Change-Id: I2e597d660d39aafda029e90ea53ad98382562c92
Add batt_id channel from VADC on PM8150B in case
it cannot be read accurately from RRADC on PM8150B.
Change-Id: Ia1fcb38a844f13d5b3f010735052b3c9c7267463
Add initial device tree for pm7250b and base nodes for revid,
pon, charger, qgauge, gpio and temp alarm peripherals.
Change-Id: I339d31be7d08b84902e03f701203cbc8334bb19d
Add a new compatible for EPSS firmware and also add new device tree
properties for lut row size and skipping enable.
Change-Id: I088a607c5bc020a2949a6edf36937d517c6076f0
APPS wakeup irq should register to PDC interrupts instead
of GIC for PDC to wakeup APPS when the interrupt is triggered
on Kona target.
Change-Id: I33224b82dced8dc55a9e65b1ecb77c738ee72bb9
This change adds the documentation for extcon gpio support to address its
required DT properties and DT examples.
Change-Id: I0a491823aedbfd43ee33142c2f83872bcc7eb241
Add ping test nodes for subsystems such as CDSP, ADSP, NPU, SLPI and
APSS (self) in order to validate the IPCC infrastructure under various
scenarios.
Change-Id: I4db69c65f6a1a621fe58e1267c7fd77ed6fcef6b
Add an SPMI debug bus device and associated child devices so that
consumers can have unrestricted access to the PMICs on
pre-production devices. This helps to make debugging easier.
Change-Id: Ifc49a81c548435fa5485d561208c169ca3bca257
Add kona and lito device tree files and other related device tree
files included in them. This snapshot is taken as of
'commit f3dd4aaeb3
("Merge "platform: qpnp-revid: Add REVID support for PM7250B")' of
the kernel project.
Change-Id: I51206d16131c8c14bc9589e1770209580e8305eb
Add devicetree bindings snapshot to the devicetree project.
This snapshot is taken as of
'commit f3dd4aaeb3 (Merge
"platform: qpnp-revid: Add REVID support for PM7250B")' of
the kernel project.
Change-Id: I5e0ec0eae63ff9c071b2924bd84c5b20d3f6554d
Charan Teja Reddy