9864ecb0f8a324acd938bb016f813d593dc3cf16
181
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Michael Bestas
|
8ca35c8035 |
Merge tag 'MMI-T2SN33.73-22-3' of https://github.com/MotorolaMobilityLLC/motorola-kernel-modules into lineage-20
"Devon push for Android 13" * tag 'MMI-T2SN33.73-22-3' of https://github.com/MotorolaMobilityLLC/motorola-kernel-modules: (3067 commits) drivers/TP: 2ed nt36528 support high resolution 4x v2 fix mmi_thermal_zone: fix compile error thermal: add uevent trigger for virtual sensor AndroidKernelModule.mk: add crow in Build_external_kernelmodule.mk drivers/TP: 2ed nt36528 support high resolution 4x v2 Support goodix touch palm cancel feature DLKM:add anc_fps_mmi driver Enable touch high report rate for ctwo bangkk: input touch set fod event bangkk: input touch remove fod coordinate when resume charging: charging state machine don't depend on battery soc : fogona : tp : update cts_test.c file WHY: need update cts_test.c HOW: update cts_test.c sc760x_charger: remove unused variable Optimize ghost log capture feature Optimize touch stow mode feature driver/TP: Support for touch stowed detection when gesture mode. Initial bringup wlan antenna for boston and use wlan_antenna.ko Clear vbus present if wireless charger present : Bangkok CSOT+FT3681 Fix TP Ghost Point Issue cc2 probabilistically recognized cc1 cc-aw35616 probabilistically not recognized drivers/TP: 2ed nt36528 support high resolution 4x. :tp:when tp sleep rst high drivers/TP: Enable TP gesture feature. charger:optimize the factory shutdown sequence Set max_ra_pages according to total ram size Add Qorvo UWB driver Add touch stowed mode feature for zinitix charge: add noffc_qg_iterm_45c config iterm charging: support HVDCP2 Vbus 9V charging Fix touch not work on user build sc760x: make battery current polority selectable from dt. cw2217b: Unify the polarity of the current reported fogona:fix USB typec cable can only recognize one side on both sides Optimize force touch sensor firmware update flow Add sysfs node support Support zoom function Add volume key support Add cs pressure sensor initial source code :charger:The battery level is not change during charging. different charge termination current at 35-45 temperature range fogona add charge led(2) :tp:nvt36528 tp gesture fuction add[1/2] moto_mmap_fault: Support the new hook moto_mmap_fault: Fix KASAN report use-after-free moto mmap fault driver:Optimize the code flow moto_mmap_fault:Protect the pointer Moto mmap fault driver fogona:AW96105A driver causes user version compilation failure 2nd main charger bq2589x can not read vbus voltage :tp:icnl9916c tp gesture fuction add[1/2] mmi-smbcharger-iio: Fix power watt error mmi-smbcharger-iio: Add charging power interface fogor: tp: optimize fogor ilitek tp log level fogor: tp: input touch add wait pm<1> fogor: tp: optimize gki tp function<2> nova0flash: Fix unused lable build error nova0flash: Fix selftest panic on 5.15 kernel fogona:aw96105A brint up[5] fogona:aw96105A SAR bring up[3] :tp:Support Qcom panel notify for 1st fogona touch :tp:Support Qcom panel notify for 2nd fogona touch fogona:change fogona booster volt fogo charger_ic bring up module QcomPkg: fogo charger bring up module fogor: touch: optimization fogor tm-icnl9916c suspend function ctwo: Solve TOF phio ioctl timeout tp:2nd tp error fix tp:fogona 1st tp mmi,status add tp:fogona 2nd tp bringup[2/4] fogona:change fogona booster volt Get CLI touch gesture type from gesture node Avoid usb detection at _FT8726 touchscreen driver fogona:vibrator bring up for driver after resolved build error dlkm: add new nfc_nci driver fogor: touch: 1st icnl9916c add some demands fogor: touch: add 2nd ili9883c tp demands optimize log level-aw fogona:vibrator bring up for driver Fuel gauge RT9426a driver kernel5.15 compatible mmi_parallel_charger_iio:optimize the pdo select support typec cid event Add typec CID event for notification tp:fogona icnl9916c tp bring [1/3] fogona:add fogona booster[1/3] Implement wlc_tx_capability for cps4019 Cw2217:kernel 5.15 compatible compile change Enable CLI touch large palm detection for lynkco charger:optimize the qc3p reduce vbus voltage sx933x:setup build on kernel 5.15 fogor: touch: CQA-test add IC name wt6630 remove unused pointer struct qti power_supply header at kernel 5.15 charger motorola module kernel-5.15 compatible design. : Add Chipone fps v1 driver module fogor: tp: 1st icnl9916c CQA-test function ctwo: solve tof compile issue ctwo:fix compile issue Revert "(CR): ctwo: enable TOF phio tool" driver: fogor: tp gki issue adapt ctwo: enable TOF phio tool MOTODESK-12263: Change touch gesture mode key values Open USB log in factory version for bangkk[3/3] Add st54spi_gpio driver for ST54L eSE Support game idle mode for focal touch fogor: kernel: 2nd tongxingda ili9883c TP bringup AndroidKernelModule.mk: add bengal in Build_external_kernelmodule.mk : Fix goodix touch GKI build break goodix_brl_mmi: clip area support touchscreen_mmi: clip area support driver: fogor: tp tm-icnl9916c tp bringup<2> Berlin Row - Avoid fts_tp continuous wakeups mmi_charger:init thermal parameter at high temp fogor/sensor: adjust sx937x driver format nova_0flash_mmi: conditionally enable spi CS delay feature sc760x: Enter Low power mode when system suspend Update battery status before reading smbcharger:support power_watt report Add capacity_level to discrete charger driver sbmcharger:optimize the pdo select Set touch reset and interrupt pin Reduce zinitix touch resume time mmi_charger:optimize the thermal vote policy bq25980_mmi:optimize the adc read cw2217b: optimize the battery capacity optimize aw963xx driver-set_enable mmi_charger:optimize the pump policy mmi_charger:enable adc when charger plugin sc8541:enable adc when charger plugin charger:optimize the qc3p init vbus voltage Reduce 'cw2217b_fg_mmi.ko' boot log printed. cw2217b: modify charging status optimize aw963xx driver Set touch reset and interrupt pin pd: configurable tcpc timeout to detect charger type save the value of ui_full to the A2 register Optimize zinitix touch firmware upgrade flow : Fix FOD zero tap not working issue charger:optimize the qc3p request voltage bangkk: input touch add game feature edge/rate sgm4154x: support 8w wireless charging Optimize zinitix touch firmware upgrade flow Set the thermal_ratio_nums. Add SUPPORT_DYNAMIC_UPDATE_UI_FULL control need to clear jiffies in non-charging state. input: ili9882_mmi: remove unused netlink codes use the battery voltage of fuel guage in charging logic. goodix_blr_mmi: wakeup gesture gt9966 Add sysfs node for cid status read bangkok modify focal tp power on off Need to initialize full charger capacity of 100%. Support goodix ghost touch log capture bangkok add tp charger mode charger:seperate the FFC and none FFC parameter Support touch assit p-sensor dectection mmi_charger: power_changed when charger register susccess fix read Board level Capacitor Compensation Value sc760x_charger_mmi: no need to return failed The probability of sarsensor not being mounted Add more sku types and typec cid support fg_cw2217b: Ensuring monotonic variation of soc Revert "(CR): Ensuring monotonic variation of soc" modify focal tp optimize aw963xx driver sc760x_charger_mmi: Update sc760x_en to psy_property Ensuring monotonic variation of soc optimize aw963xx driver && insert usb calibration bangkok focaltech tp modify for system crash sc760x_charger_mmi: Support THERMAL_RATIO_CONTROL cw2217b: add some logs for soc jumping debug. Check if i2c device available before add driver Support the input charge current limit for wireless charger bangkk: input touch add config for bangkk only Add Wait pm for zinitix touch gesture feature Bangkok add focal tp vdd gpio low Bangkok modify for focaltech touch fod sar sensor bring up 1/2 sar sensor bring up -aw Bangkok modify for focal to no touch add some param for bq25980 driver Bangkok TP bring up Add touch pocket mode feature sc760x_charger_mmi: fix build error of irq_enabled sc760x: Do not enable IRQ until sc760x gpio enable backlight: aw99703 use exponential curve for genevn sc760x: remove sc760x_dump_reg from irq_handler Add gesture pm for goodix touch Reduce firmware upgrade time for zinitix touch sc760x: Check gpio_en before access I2C bus Documentation:ledtrig-sol:Add led trig support nova_0flash_mmi: fix build failure cw2217: Dynamic adjust UI_FULL The current units should be consistent. Optimize the charger control logic sc760x:ensure that user configuration takes precedence ensure that user configuration takes precedence. Pnangn:Upgrade Egis SDK to v1.0.10 SOL Led: Sync set brightness call before blink set Increase CLI touch raw data level for lynkco sc760x_charger_mmi: limited ibatt step by step Fix multi-finger touch error logic sc760x: fixed build err sc760x: Dynamic check sc760x power on Add gesture support for zinitix touch IC Oberon : SOL LED: Added module_params Sol led: Handle power supply states support transfer the flip target fcc to main battery. focaltech_0flash_v2_mmi: update log level for input report log lynkco: add 32-bit ioctl for tcmd lynkco: update TOF kernel version discharge with software pd pps charger fg: optimization fg batt status flip_batt: optimization flip batt charger status Support input voltage limit for wireless charger Modify Zinitix firmware version name CLI screen support 3points input: fix ili7807s touch dislocation when aging test check the charger status again when devices shutdown. sx937x: add flip near & far reg list Optimize CLI FocalTech touch resume flow Optimize touch resume flow Edit config and kbuild to support lyncko lynkco: Solve the compile error on user version use discharging interval for FULL battery status Optimize the battery data updating to save power Add timestamp node for CLI FTS touch lynkco: Add TOF kernel driver drv8424_mmi: motor fault handling for hiphi, skip charger confirmation zeekr:modify capsensor driver input: fix the disappearance of ili7807s stylus handwriting Change CLI touch input device name Initialize the delay work before IRQ init Revert "(CR) Pnangn:Enable FPS overheat protection" usb_therm:optimize the usb cooler function Pnangn:Enable FPS overheat protection Support factory test for zinitix touch IC usb_therm: SDP/CDP should't toggle mosfet fixup! (CR) drv8424_mmi: update motor sequences drv8424_mmi: update motor sequences drv8424_mmi: optimize stop motor startegy align battery current and charger power update rate sc760x: sleep 2s after pull up sc760x_en hiphi:moto stylus service show up in battery statistics SC760x: Bringup sc760x charger balance Add mmi touch class support for zinitix charge: add tmo sku max charge temp for no temp zones products Change the way of loading touch firmware Add a sysfs node to control TUD Add power control for zinitix touch watchdogtest: set error printk level for critical warning log sr100: Add NULL pointer checks sr100: Confirm the read timeout only for read operations sr100: Increase the packet size to 4200 sr100: Decide the normal read or ext Fix build error unused-but-set-variable in sr100 focaltech_0flash_v2_mmi:improve charger detection sx937x: reset chipset instead of cali pnangn:2nd main charger sc8989 disable adc conversion dlkm/fps:optimise ets_bix_mmi for pnangn haptic_hv: Select waveform based on duration Reset to default waveform after vibration dlkm/fps:optimise screen status interface control Build ztw622 as a DLKM module Add initial source code of ztw622 touch driver drv8424_mmi: motor overshoot handling Support goodix touch under water detection Support touch under water detection haptic_hv: Prevent sysfs attrs from being destroyed Add lpd mitigate driver module Add LPD device notify support in mmi_relay Add glink oem command to support lpd mitigate mode dlkm: bo: Change the logic of report fod up key Revert "(CR): haptic_hv: Prevent sysfs attrs from being destroyed" Enable the charge IC after the detection compelte. Optimize time sequence of usb_therm mos control utag: Enlarge buffer size to fill full workqueue name fix wired charging error online logic usb_therm: add usb_therm toggle mosfet input: ili9882_mmi: remove unused netlink codes cancel the work befor scheduling. input: optimize nt36672c touch spi timing qti_glink_charger: support cps4019 qti_qlink_charger: support cps4019 fg: don't get battery info when fg run into boot mode optimize IR comp for 2nd chg ic optimize IR comp for 2nd chg ic genevn: optimize the process of ili7807s touch sending stylus cmd pnangn:2nd charger sc8989 ICL3A set to 0x3a fixed unused variable 'batt_curr' error. genevn: make macro GET_TS_DATA effective(dev) effecitve in touch haptic_hv: Add HAL compatility haptic_hv: Prevent sysfs attrs from being destroyed bm_ulog: Optimize adsp bm ulog driver Add charging state for wireless charging. genevn: optimize touch nt36672c gesture for fw v08 Fix goodix touch driver build error genevn: optimize ili7807s gesture mode genevn: optimize nt36672c gesture mode Optimize FocalTech gesture mode Optimize goodix gesture mode Rework cli gesture mode dynamic adjust vindpm dynamic adjust vindpm Support wireless power source as charger input. Reconfigue the charger for user input or chip reset qti_glink_charger: fix build err fixup! (CR): qti_glink_charger: Checking wireless TX_MODE qti_glink_charger: Checking wireless TX_MODE drv8424_mmi: enforced fault state Juno: Keep the current limit unchanged. add IR comp require input: ili9882_mmi: initial dda support driver v2.0 input: nova_0flash_mmi: update dda driver to v2.0 input: nova_0flash_mmi: check whether panel exists input: ili9882_mmi: move mmi and pen init to plat probe chg: let each project could use its own heartbeat work period input: nova_0flash_mmi: change single+double tap command input: nova_0flash_mmi: add timestamp for touchscreen mmi input: ili9882_mmi: add last_event_time function Add debug log for fod key event mmi_info : add chipid info into bootinfo input: ili9882_mmi: add single/double tap function focaltech_0flash_v2_mmi: add productinfo node in touchscreen sys bronco/sensor: fix capsensor diff reg error Use s-dt-gesture to report CLI touch gesture input: nova_0flash_mmi: add dda alpha1.00 driver input: nova_0flash_mmi: set pen flag when resume input: nova_0flash_mmi: use different touch state macro input: nova_0flash_mmi: add double tap support Fingerprint timing sequence error dlkm:optimise report function for pen nova_0flash_mmi: add touch point timestamp focaltech_0flash_v2_mmi: add touch point timestamp dlkm:optimise pen probe & report function qti_glink_charger: Add wls tx id&sn qti_glink_charger: Add wls tx capability input: ili9882_mmi: set fw ready flag when download complete Geneva5G NA: Optimized the loading time of wl2864c Support touch high resolution input: ili9882_mmi: change pen and charger detection values genevn: fix test panic backlight for aw99703 pnangn:2nd main charger add led driver code add flag to ensure shutdown call only once SC89890H update register val fail f_usbnet:Requeue the request in shutdown case Revert "Revert "(CR):f_usbnet:Handle the rx error conditions"" change not disable flip charge if enable by chg_en node charge:geneva disable wireless log fixup! (CR) input: ili9882_mmi: don't use kernel_read/write for 5.10 Add the recovery scheme of the secondary panel ESD software input: ili9882_mmi: don't use kernel_read/write for 5.10 input: nova_0flash_mmi: don't use kernel_read/write for 5.10 input: ili9882_mmi: add pen notify and palm settings input: nova_0flash_mmi: use touchscreen mmi to support pen sgm4154x add led driver code Revert "(CR):f_usbnet:Handle the rx error conditions" Wait pm resume before read data from IC Support touch sensitivity in game mode for zeekr dlkm: optimize driver aw99703 and aw37501 f_usbnet:Handle the rx error conditions ASoC: add aw862x haptic driver v1.9.0 Fix qti glink driver load fail Send sku type and HW revision to adsp Add a macro to control if cli_gesture created input: ili9882_mmi: add passive pen support add property voltage_ocv drv8424_mmi: power up/down slider handling distinguish haptic feedback by four different driver strength Add gesture mode support for focaltech touch Add CLI touch gesture support on mmi touch screen class fix crashed at bm_ulog_print_log tundra: input touch update gesture cmd bronco: dlkm: Enable touch report rate switch feature input: focaltech_0flash_v2_mmi: add initial pinctrl feature support input: ili9882_mmi: add initial mmi support Make compatible for another pinctrl name drv8424_mmi: add max pps interface input: genevn: optimize ili7807s driver for kernel 5.10 WLC: change 50w dock fan speed to 4000 round/s Fix FocalTech driver build error when use GKI2.0 drv8424_mmi: handling corner cases 18W charging set sgm4154x iindpm comp 100mA DLKM/bix:update ets_bix driver DLKM/fpc:optimise build rule for FPC fps driver WL2868C: Disable all regulators before shutdown. sc89890h charger ic factory mode close ico input: genevn: optimize nt36673c driver for kernel 5.10 charging: change PM mechanism Pnangn:FPS bringup on Pnangn mainline fixup! (CR) drv8424_mmi: motor slippage recovery drv8424_mmi: motor slippage recovery dlkm:optimise bu250xx bulild rule wlc:add feature supporting for Moto 50W dock in WLC driver Revert "(CR): charging: add icl*vbus to report power max" Revert "(CR): modules: vision station WHITE MASK test failed" sarsensor:optimise log output for sx9375 fixup! (CR) goodix_berlin_mmi: active touch area feature Skip BM ulog request if bm debug is disabled Support normal mode switch corner suppression level Power: Add /proc/wakeup_sources for Battery Tracer TP wake up of gesture fix drv8424_mmi: updated and new features goodix_berlin_mmi: active touch area feature Fix noise test case fail of factory test Support FocalTech touch noise test point by point charge ic sc89890 set ico,common baseline code Enable touch report rate switch feature fixup! (CR) drv8424_mmi: adjust motor sequences Fix FocalTech_V3 touch driver build error penang: input touch add gki for focaltech drv8424_mmi: adjust motor sequences Android.mk: add parrot build options for geneva row Decrease the log of register panel notifier Remove unused send touch IC config drv8424_mmi: adjust sequences for 2.3&2.8 pitch drv8424_mmi: sensor data driven position detection TP: The TP ft8057 bringup Fix goodix touch driver build error Add fcc_ma/fv_mv and thermal_level debug info in kernel FG: Monotonic SoC to prevent SoC jump input: goodix: disable double click of touch firmware update bm ulog mask Support double tap to wake up the screen Use node to notify CLI touch gesture mode usbnet: notify if config to sync with userspace aw86927: Add vendor-supplied driver WLC: when wlc is offline, set psy prop value as 0 charging: add wls charging icl workaround for apple TX wlc: change wlc current from ibat to iout TP focal bsp fix[1/1] WLC: Add vbus check before power supply read ops TP change config id : chipone: enable power gpio for penang TP suspend and resume fix[1/1] TP change config id TP: The TP nt36528 bringup charging: disable I2C error workaround adjust flip charger input current support empty vbat shutdown with charger drv8424_mmi: fix sensors logic and data charging: add battery ovp debounce charging: fixed build error qti_glink_charger: Add some debug info Optimize CLI touch single tap function charging: remove debug log typec: disable vbus under 0.8V interrupt when vbus remove TP charger mode fix[1/1] Monitor fg psy event once get the psy name Fix CLI touch gesture event timeout handling logic when kernel wakeup abnormal charging: don't update qc3.0 type to core when rerun apsd support battery ovp/occp/ocp Revert "(CR): Add OVP and OCP for battery" sgm4154x_charger_lite: add thermal mitigation rhode: input touch update syna config id fixup! (CR): Reset charging if it's halt Reset charging if it's halt FG_MM8013: Update logic to compatible with param_ver=0xa200 control charger irq for otg or battery presence Trigger battery current read on demand drv8424_mmi: proper IRQ setup drv8424_mmi: unify source code indentation drv8424_mmi: dual motors fault handling Add OVP and OCP for battery charging: change wireless charging icl step increase rate Add the description sysfs node when usbnet init charging: optimize select pd capacity charging: optimize wireless charging icl vote dlkm: led_aw2033: don't enable led and CHGDIS when boot Add parrot in Build_external_kernelmodule.mk charging: enable cp ADC when factory mode add and remove sysfs files when usbnet config Always power-on eSE to avoid ese not open issue mm8013c_fg: add more safeguard when update FW/param charging: disable cp adc when cp don't work Support goodix 9916P touch IC Set to discharging status if charger absent fg: modify fake battery default value for assembly test mm8013c_fg: force none update fw/paramerter charging: add some log mm8013c_fg: create fw/param/battery_id node MM8013C_FG: match battery_id && parameter ver when do update sgm4154x_charger_lite:get charge counter from flip fg mmi_charger: combine flip & main battery charge counter qti_glink_charger:add charge counter prop bq27426_fg_mmi:add charge counter prop charging: don't enable term when slave cp disabled charging: export charge ops interface for authen test WLC: Add force flag for fw upgrade interface : tundra : keep nfc irq always wakeupable dlkm: aw2033: set blink mode brightness correct the paired_ichg value before setting connect 33W charger, the power is only 2.5W Stop charging by paired battery Support touch sensitivity in game mode for eqs Revert "Revert "(CR): charging: Don't switch dpdm from AP to pmic when host mode"" charging: limit max icl for wireless charging charging: add wireless icl increase step by step drv8424_mmi: update position/status w/o sensors remove the sysfs notify from interrupt context usbnet: add sysfs files for net interface config the charging status shows "not charging",but the charging current is normal introduct MM8013C FG update fw/parameter program tundra: input touch disable double click tundra:input touch upate report rate Skip ichg set during paired notify in factory mode TP limit test result output[1/1] TP fix tcmd fail[1/1] TP limit test[1/1] Remove unused variable defination in case build error charging: if pd active,don't detected HVDCP factory: Add tx_mode_vout for factory testing TP charger mode[1/1] TP gesture wake up[1/1] cp: add input voltage and current file node wls-chg: increase wait time for boost voltage Fix kernel trace when execting mutex lock Fix CLI touch easywake failure charging: optimize PD capacity select algorithm rtwo: add log fix issuse:variable 'ret' set but not used motorola:Rhodec:Update chipone_fhd_mmi Devon:Optimize The FPC Power-on Process Fix goodix touch SPI config compile error tundra: input touch use boottime to get timestampe ONELI: add sar sensor log add sar sensor log charging: reset dpdm when charger removed rt9471 not charge 3min during a complete charging test focaltech_0flash_v2_mmi: enable FTS_PATCH_COMERR_PM for deep sleep charging: add config charger mode to FG fg: add api to write temperature/chargeType to fg interior Revert "charging: Don't switch dpdm from AP to pmic when host mode" drv8424_mmi: relative positions, gpio init and reset wls-chg: change psy/voltage_now's value to vout value Add timestamp log for FOD debug focaltech_0flash_v2_mmi: disable FTS debug config by default focaltech_0flash_v2_mmi: single tap gesture not work fix charging: Don't switch dpdm from AP to pmic when host mode TP bring up[1/4] Add charger power watt uevent tundra: input touch add sample rate Lift off current touch when suspend WLS_CHG: change fw upgrade judgment tundra: input touch fix gki issue wls-chg: add fw ver judgment for blank chip bms: add charge counter in mm8013 Integrate mmi_device_is_available() into mmi_check_dynamic_device_node() mmi_info: Add missing of_node_put() Check return of regulator_enable charger:add the handle for quick plug out/in case. Turn off load switch during charging Improve cw2217b fg driver compatibility Optimize high report rate feature WLS-CHG: ADD usb icl vote for wls chg charging: config vindpm by dts DUT keeps vibrating after connecting to computer via USB touchscreen_mmi: active region interface drv8424_mmi: enable gpio init drv8424_mmi: position detection and sensor data goodix_blr_mmi: active area support drv8424_mmi: fix makefile to build for android s Integrate goodix stylus Direct Data Access feature focaltech_0flash_v2_mmi: disable FTS ESD check by default Fix goodix touch driver build error charging: only turbo charger enable FFC function charging: config batt profile max fv focaltech_0flash_v2_mmi: gesture mode feature support wls-chg: change chg pad led to green when soc is 100 wls-chg: adjust some registers' addreess value wls-chg: add tcmd test interface nova_0flash_mmi: gesture mode improve ili9882_mmi:gesture mode improve charging: vote PD ICL 3A when PD connected charging: show turbo charger when PD connected focaltech_0flash_v2_mmi:update fw info when fw resume devon:fix z350 detect issue for apple charger. charging:Ignore request dpdm charging: optimize rerun apsd for sc89890H charging:Ignore request dpdm qti_glink_charger: Add WLC func utags: Free allocated memory when rmmod utags.ko utags: Free the device name buffer when rmmod utags.ko charger: add wireless type judgement for healthd wls-chg: change name of the file point chip_id wls-chg: add force wls chg test interface psy: add DPDM operation ignore option wls-chg: set fix register definition error charging: optimize code for discrete charging Use delta OCV to limit the charging current charging: optimize search charger capacity method charging: add pd vdm verify IIO channel pd: add pd vdm verify notify passageway pd: Add moto private charge protocol wls_chg: add dependence for mmi_discrete_charger wls_chg: add charger class interface wt6670f: use integer instead of floating point drv8424_mmi: status & position show methods drv8424_mmi: status and position handling drv8424_mmi: support variable speed sequences drv8424_mmi: stepper motor driver sx937x_multi:optimize code phone with rt9471 will ramdump when usb plug in Clear data buffer after releasing connects. wls_chg: remove check chip id function wls_charge: add fw version check logic focaltech_0flash_v2_mmi:support charger detection feature Disable debugging log for power consumption tundra: input touch fix rmmod add kernel version check for I_BDEV focaltech_0flash_v2_mmi:add flash sys nodes to support moto FW download focaltech_0flash_v2_mmi: add more touchscreen sys nodes fix build err for new Kernel version usbnet: fix build error in new Kernel version FG: MM8013 FG read batt_temp via iio chanel charging: delay 100ms to rerun apsd when charger inserted charging: bring up PD policy utags: fix build error on kernel 5.15 charging:Modify regs dump mmi_charger: set wls charging as dts configuration wls_charge: add status jugdement for state register read fix random crashes due to floating point operation rhode: input touch set reset high when sleep increase tcpc timeout to wait detect charge type rt9471 driver optimize, cannot connect adb after power on qti_glink_charger: Update wireless dump info dlkm: vibrator: No vibration when media controls working. rt9471 charge status incorrect focaltech_0flash_v2_mmi: add touch sys nodes, enable FW download focaltech_0flash_v2_mmi:ft8726 init codes on new version 3.4 Use battery OCV to calculate the delta battery voltage hawao+oled: recharger change level to 98%,200mv support init bm ulog : Do not disable Zero Tap when FOD is not enabled. tundra: input touch move stage2 after data init rhode: vibrator move camera notice after enable devon:add rt9471 charger Add factory kill time debounce support charging: fixed user version build error wls: add wls online status judgment tundra: input touch add touch time sysfs sgm4154x: Fix the build error on devon wls: add mmi_info symbol table wls: let cps4019 could use interfaces in mmi_charger wls: add boot firmware for CPS4019 wls: add FW upgrade logic wls: add power boost logic wls: add cps4019's bootloader download logic wls: add VOUT(VBUS/BOOST) checking logic wls: fix FW version register definition error update bq27426 battery profile for li/oneli sgm4154x:Bring up charger IC SGM41543D backlight/lm3697: add more current mode for HBM charger: add gpio request protection for WLS control charging: add SC8541 support Devon:Modify device name to match with kl charger: add mux control for WLS in otg mode for BQ2589x charger: add mux control for WLS in otg mode for SGM4154x dlkm:Rhodec:Modify chipone_tddi_fhd_mmi to fix KASAN problem Devon:seperated DVT1/DVT2 sar sensor firmware Fix fail loading CLI touch limit file sometimes Fix enable gesture mode error on panel off state charger: remove write permission from interface without "store" Devon:FPC fingerprint doesn't work ONELI/LI: add calbration driver of capsensor Set self test fail when fail loading CLI touch test limits Add sign-of-life LED trigger module changing: add sysfs PSY_IIO_TYPEC_ACCESSORY_MODE bq2597x:retry to read nu2105 id Add kalama in Build_external_kernelmodule.mk not notify current changes charger: change the adc value unit and add slave iio charger: Rename bq2597x to cp devon:optimize charging hawao+oled: fg 1st(cw2217) change to 99 ,2nd(sm5602) change to 98 charger:remove read permission charger:increase wait_time_out charger:add I2C 32bits addr interface : Rhodec: Uptade chipone_tddi_fhd_mmi driver sm5350_bl: support current align configuration for exp mode devon:charger bring up Devon:Bringup Egistec FPS ETS_617 Devon:Bringup Egistec FPS ETS_617 charging: delete redundant code FG: add fake battery in mm8013 Notify mmi_battery change when combo current change dlkm: leds/aw2033: add initial version driver oneli: update wl2864c makefile Fix parade touch driver build eror Add CLI touch feature of single tap to wakeup device rhode: input touch focal add reset rhode: input touch fix factory test charger:cps4019 fix build errors charger:Add Android.mk and Kbuild files charger:cps4019 wireless charging bring up devon:charger bring up add chipone single tap and cqatest function chipone single tap function sgm41513:add sgm41513 chipid detect, devon:charger bring up sgm4154x:add sgm41513 macro control. devon:charger bring up devon:charger bring up devon:charger bring up Change CLI touch test limits file name format Bringup FPC Fingerprint Bringup FPC Fingerprint driver/egis: Update Makefile to make the building compatible Add CLI touch sysfs factory test node Hawao+oled: the 2nd fg(sm5602)set 97% to 100% Comment out unused CLI sysfs node code PD: apply sc2150A vendor patch Revert "(CR): PD: apply sc2150A vendor patch" Adjust the paired battery policy charging: update HW current max to userspace charging: improve recharge batt voltage after stop PD: apply sc2150A vendor patch charging: add device node support charging: add iio sys support fg: bring up fuel gauge mm8013 charging: charger pump quit when vbat < chrg_step_cv_volt rhode: input touch fix build id dlkm: chipone_tddi_fhd: add initial chipone fhd tddi driver EQS: Fix for compile. Fix system crash when main touch uses LDOC13 charging: add bq25960 gpio irq charging: add bq25960 logs Add ibat polority invert from dt : Create rbs fod driver for dubai devon:sensors bringup Revert FOD change from capacitive rbs remove unused dependence sym ref : Fix fod event not working during touch resume charging: modify ss_timeout to max value Hawaii+ OLED:fpsensor chipone enable power control [Hawaii+Oled]Remove the print function of fingerprint hard interrupt EGISFP : Fix relay build dependence dlkm: sm5350_bl: add default brightness config charge : fix read VBUS error cause charging power climb slow issue optimize battery charging policy devon:sensors bringup Add relay between fps and touch : Trigger fod event only when FOD is enabled Add CLI touch factory test cp_panel node charging: rename filename and fix build errors fg: fixed sm5602 can't update info immediately Li:capsensor factory bringup Change config_id format for FW upgrade dubai: vibrator fix rtp issue FG: Add mm8013c driver code charging: add bq25960 driver charger: fix qc3p rerun bc1.2 fail w/ some qc3.0 adpter charging: Default using HW ILIM for bq25890 and SC89890 Fix "active_panel" undefined build error. Fix build errors with missing header files. dlkm: sm5350: get map mode from dtsi Change parade touch driver header files path Add CLI parade touch suspend/resume logic Support receiving dual-screen notifiactions. charging: sometime main charger can't recovery to max icl smart_pen_charger: Update pen soc to ADSP modules: The whole charging process will go twice CV let hal to control the log level Add HW chip detect mode for ST NFC rhode: update charger mode & ito test result Revert "(CR) nova_0flash_mmi: log touch down event timestamp" Add module parameter to enable panic on delta_vbat cyttsp5_core.c: Import namepace for "kernel_read" Change CLI touch test return data format Revert "(CR): SM5602_FG: apply patch-version: 20220212_00" dynamic adjust battery voltage charging: fixed build error Rhode: Modify ITO test way from "echo" to "cat" charging: fixed build error charging: add qc3p sw detected for sc89890H SM5602_FG: apply patch-version: 20220212_00 dlkm: vibrator: Support camera actuator noise reduction Rhode: TP: focal ic bringup: driver files upload PD: add sc2150A vendor patch charging: clear charger type variable charging: ignore setting qc icl when pd active Set paired battery discharge load based paired_ichg Add CLI touch sysfs node for factory test nova_0flash_mmi: log touch down event timestamp modules:sc89890h:bringup second master charger otg charging: remove the vbat condition which enable 33W charging: increase qc3p power judge threshold modules:Second charger could recharge after report full charge charging: report power max 30W when usb type is qc3p sar:add driver for multi sx937x sar: update the driver of aw9610x to v0.9.3 FG: SM5602 FG add cycle_count/fcc_design/counter property Update zero tap down and up logic rhode: solve the problem of slow power-off of front dvdd Support a main battery power supply Fix cyttsp5 driver crash add paired battery info notification add paired id to support paired battery notification ignore optional dts property exist check result Use touch mmi class method to do FW upgrade Support touchscreen class in the parade drvier code. Hawaii+oled: chipone fingerprint disable power control qc3p beging charging voltage to 3V slow attach 33w change code buld fail Solve the problem of sending command conflicts chg: fix qc3p rerun bc1.2 fail w/ some qc3.0 adpter charging: slow attach usb will not charging as 33w charging: avoid I2C bus pending rhodec: fix compile error for ILI7807S modules: Can't show turbo icon for quickly plugout/in usb rhodec:Bringup touch TXD ILI7807S Use of_ API to parse gpio pin number Fix parade tma5xx touch driver compiling error Add initial parade touch driver code charging: set icl 1.5A when type_c mode is medium rhode: long time vibration notice camera gauge: force set sm5602 temperature to 25 degree modules: vision station WHITE MASK test failed FG: Rt9426a fg add soc ir comp charging: avoid icl =100ma for 33w charger FG: sm5602 fg support muti-battery parameter DLKM/fps:optimise focal driver charging: add pd support judge HAWAO+OLED: chipone fingerprint modify the power-on sequence gauge: force batt present in bt station for factory test ibiza:disable power control for chipone FPS input: goodix_v1510: fix irq wake disable unbalanced issue : Support screen callback thru panel notification use correct macro for FOD discrete:optimize charging enabled interface qti_glink_charger: Add wireless dump info smart_pen_charger: Add power_supply_changed when receive PEN event charging: report usb present when pd hard reset Bringup sgm4154x charger driver to Moto product Add initial sgm4154x driver code from vendor FPS: Modify the power-on sequence for focaltech 2snd Fuelgauge SM5602 move temp coefficient to ext channel 2snd Fuelgauge SM5602 current direct set and coefficient sm5602:set battery temp to 25 in moto-factory mode cw2217b:set battery temp to 25 in moto-factory mode Add watchdog_cpu_dump and tzlog_dump support on 5.4 Hawao:Enable power gpio for Chipone FPS DLKM/fps:add build control for focal charging: fixed 15W product build error charging: add SW QC3+ 33W turbo charging goodix: Open the touch esd check function charging: add mutex lock init power:fet_control: Apply main batt ocv instead of v_now charging: avoid i2c error when system resume and suspend DLKM/fps:optimise screen status interface for focal modules:regulator_vibartor:add regulator long short voltage logic. lock mode switching operations for thread synchronization. sar: support sar reset after usb hot-plug dlkm:Update rbs driver for FOD mmi_annotate: add unpersist annotate memory region to minidump focaltech_v3_mmi:add touchscreen mmi to improve FW logic goodix: Modify the report rate command. dubai: vibrate add short index Increase the number of I2C retries. dubai: input touch add wait pm qc3p:set qc3p charging voltage threshold 3.4V Change to mdelay for power up delay Adjust bq27426 fg module to support Android S Revert (CR):sgm4154x:add hawao vbus adc sample ratio wt6670: add QC3P firmware num node to /proc/driver DLKM/fps:optimise power ctl for focal FG: apply rt9426a 0015 patch rhodep:open charger mode; charging: enable irq wake up charging: optimize sgm41542 charging type detected Revert "(CR):add firmware interface" bq2589x:add qc3p charger type sgm:add qc3p charger type backlight/sm5350: Add a sm5350 IC which is second backlight IC charging: avoid to report usb type before apsd done charging: add icl*vbus to report power max charger: compatible NU2105 Charge Pump in bq2597x Reset charger configure and constraint for glink down FG: rt9426a add cancel_work when system into suspend wt6670: add retry function to wt6670 read fw Update Goodix TP FOD event implementation qc3p:optimize power supply init mmi_annotate: write info mem when persist mem unsupported [hawaii+oled]:vibrator long short vibration intensity 1/2 smart_pen_charger: Add PEN_STAT_CHARGE_DISABLED mod the sc89890h register config Rhode:use regulator interface to control vbus dubai: input touch add gki support bq:add enable termination function FG: RT9426a add safeguard for SOH FG: RT9426A add safeguard for ocv_index goodix: Solve cpu_latency_qos_add_request called warning input: goodix_v1510: add charging and gtp-tools node PD: config cc status for sc2150 after shutdown Do not re-enable the stylus when the stylus mode is switched mmi_charger:use orderly shutdown in factory mode sgm4154x:add hawao vbus adc sample ratio qc3p:limit ibus 300mA for main charger no ibus adc charging: Ignore the PD vote icl unless BC1.2 done add charger ic - sc89890h config modules:add sm5602 patch to fix the soc jump problem FG: Modify SM5602 FG first update battery data time to 50ms add force_chg_auto_enable interface add firmware interface Disable irq before entering gesture mode and IC resetting. input: goodix_v1510: enable single tap function Support resend stylus cmd after abnormal resetting. Record and restore the value of the mode QC3P:use qc3p config distinguish other not qc3p project QC3P:detection and iio sys support z350: add 2nd z350 qc logic sgm:add enable termination function discrete:add enable termination iio definition qc3p:add main charger termination ctl algorithm QC3P:turbo charger module return value error dubai: vibrator add haptic rtp qc3p:optimize turbo charging current charging: add ibat monitor work fg: get current in real time sm5602: fix kernel panic when the device resume PEN_HALL:disable wakeup source fs:exfat-linux:Integrate exfat-linux open source driver fg/sm5602: Early detection device chipID fg/sm5602: correct the unit of vbat and temp sc89890h:device: add sc89890h device id focaltech_v3_mmi: rename .i file to fix potential build error focaltech_v3_mmi: enable firmware download focaltech_v3_mmi: add sys touch node & info module/input:hawao: add focaltech_v3_mmi for i2c flash Rhode 5GP: add wt6670 get firmware num node dubai: input touch update fw 21120803 DLKM/fps:add power ctrl for ets kernel driver pd: bring up sc2150a power:fet_control Balance ckt Fet Close Batt2 over 200mV wt6670: wake up wt6670 when get version num sm5602: Add new fgauge sm5602 QC3P:iio sys channel add kernel version QC3P:module name change to mmi_discrete_turbo_charger QC3P:discrete turbo charger FG:dynamic config sns resistance QC3P:detection and iio sys support QC3P:iio sys channel QC3P:add iio sys support QC3P:ADC algorithm compatible QC3P:copy of module mmi_parallel_charger_iio for mmi_discrete_turbo_charger goodix: support film sensitivity function. Support report rate switch in RoguePRC dubai: vibrator add long brk PD: Pick Richtek patch13 to improve irq response speed PD:Revert "(CR):rt1715:add debugfs interface for dump reg" PD: pick Richtek patch12 FG: power_supply_property get rt9426a battery info from local value dubai: input touch support fod sar: aw9610: Modify sar sensor voltage. moto regulator vibrator: fix null pointer bug charging: config ICL after BC1.2 done qti_glink_charger: Add wls_notify_callback qti_glink_charger: Add folio_mode qti_glink_charger: Add wls input current limit for thermal PD: config pd active is inactive status after cable plug out wt6670f_qc3p: qc3p wt6760 isp download function charging: add sem lock to protect dpdm detected FG:cw2217 Remove the redundant msleep in the read i2c operation FROMGIT: usb: gadget: f_mass_storage: Disable eps during disconnect sar: aw9610: the reference channel can't be seen on user layer bias/ocp2138:add support ocp2138 bias ic config fg: cw2217 add ui_soc feature IC needs to confirm the device within 50ms after power-on No need to send the suspend command when power off. Revert "(CR):power: cw2217 add ui_soc feature" bq2597x: bq2597x cp_enable interface does not work dlkm: sec_nfc: add samsung nfc driver dlkm: sd77426 driver add soh api power: cw2217 add ui_soc feature goodix_v1510_mmi: check if panel is available focaltech_v2_mmi: check if panel is available bms: do battery power supply change when fg update data Power: remove "\n" about mmi_discrete showing factory test node charging: add charge counter prop kernel:export interface tcpm_inquire_typec_remote_rp_curr charging: modify heartbeat cycle to 100s bms: modify battery capacity unit from mah to uah charging: remove useless power supply prop charging: remove FULL status in charging ic driver power:fet_control ironmn: ps prop usb type BRICKID regulator: Force shutdown all regulators when system power off. charging: stop charging when capacity > upper_limit charging: fixed otg boost current limit error Add pm_qos control to reduce the interrupt responce time wl2868c: modify ldo2 and ldo6 default voltage charging: fixed the error HVDCP voltage standard charging: set register 3250ma when icl >=3A smart_pen_charger: Add pen_status and pen_error notify qti_glink_charger: Add tx_mode and rx_connected sysfs node PD: Extend PD adapter class charge function charge: add chage&PD policy power: rt9426a update fcc design Rhode4G: Implement different ldo compatibility. Revert "(CR): Add pm_qos control to reduce the interrupt responce time" rhodep: camera power IC et5907 config Add calibration noise error handler Add pm_qos control to reduce the interrupt responce time rhode: rhode 4G camera ldo config[2/3] charging: fixed uevent block issue mmi_qc3p_wt6670f: int pin config to input mode Revert "(CR): Revert "Revert (CR) power:fet_control Vbatt2 balance path"" Revert "(CR) power:fet_control Remove ps_notification cb" qpnp_adaptive: Change Makefile to compatible with Android S build dlkm: Add check if panel is available for gt9916s power: fix rt9426a get the negative soc or soc jump Wallet shown slow when screenoff at qingdao mmi_qc3p_wt6670f: remove QC3.5 detection in shutdown ops power:fet_control Remove ps_notification cb Revert "Revert (CR) power:fet_control Vbatt2 balance path" charging: update charging status when power supply get support pmk8350 gpio3 as stylus clk. charging: use msleep instead of mdelay dlkm: silead_fps: remapping the keycode charging: defined default termination current 120ma charging: optimize ICO feature charging: schedule monitor work when charging charging: enable absolute vindpm support goodix edge suppression function. goodix: Support interpolation game mode function. stmicro: Add the judgment of the sensitivity mode value. dlkm: nfc: alway probe nfc driver mmi_qc3p_wt6670f: fix wt6670f driver bug : Revert "(CR) power:fet_control Vbatt2 balance path" charging: optimize otg current setting logic Support leather mode setting. charging: fixed sometimes don't request dpdm issue sar: modify the vdd name for aw9610. mmi_charger: align gki 2.0 requirement charging: enable ILIM pin for bq25890H bq2597x_mmi_iio: add bq2597x gki and irq code bq2597x_mmi_iio: add bq2597x initial code mmi_qc3p_wt6670f: add qc3p logic initial code mmi_discrete_charger: modify enum redefined sgm4154x_chg_mmi: changed chg_en_pin judgment logic mmi_charger: modify enum redefined charging: fixed unit can't connected PC sometimes milan5G: sar sensor driver sar: add aw9610 driver charging: avoid vbus voltage increase to 12V charging: add qc3.0 arch for bq25890H power:fet_control Vbatt2 balance path, chrg fullcurr, ocp charge: add iio interface for typeC mode typeC: add iio interface for typeC mode charging: config charger power supply type unknown mmi_charger:use orderly shutdown in factory mode Close the stylus clock when system suspend. charging: avoid kernel panic Fix path for ion lib in Kernel 4.19 power: early register bms_phy client for cw2217_fg Update Trustonic TEE driver module to version 410a-V108 pstar: input touch add delay for mode Power: update fg current orientation charging: fixed get vbus voltage error charging: add VREG fine tunning for setting float voltage charging: replace numeric value with macros charging: adjust sgm41542 prob sequence sgm7220: add typeC mode switch interface for sgm7220 tcpc: add typeC mode switch interface sgm7220: Reorganize sgm7220 driver architecture Support goodix single tap to wake the device power: modified the caculation formula of ocv_checksum_dtsi charging: add qc3.0 charging feature sr100: Increase delay range on read/write goodix: support charger mode switching. stmicro: support touch film sensitivity switching milanf: dlkm: Support game mode by defualt on nova_0flash_mmi fts: deleate the PM_WAKEUP_EVENT in interrupt threaded DLKM: UI batt level show 100% when real batt level 0% Suspend and resume process using touchscreen class. power: cw2217b user_rsense modify to 10mhom charging: disable HVDCP detected Solve goodix tp firmware upgrade problem pct1812_mmi: no touch zones print ulog when write oem glink command bq25890: set input voltage limit 4600mv charging: setting icl=0 for usb suspend power: create chg_type node for factory test touchscreen_mmi: Support refresh reate notification in Rogue dubai: touch use gki api dlkm: fix vibrator stop fail issue typeC: add typec cc orientation interface typec: add host and device interface charging: add iio psy to provide api for other modules dlkm: rt9426a fg update read fg_extreg_table Cypfq: dlkm: Bringup touch CSOT ILI7807S dlkm: rt9426a fg update rt9426a_read_page_cmd charging: fixed user version build error for bq25890H wls-chrg: Add FOD_CURR and FOD_A/FOD_B settings API charging: dcp current base on dtsi config in mmi charger charger/bq25890: improve charger BC1.2 detection & rerun apsd typeC: import correct Modules.symvers in GKI build mode dlkm: Add focaltech fps module dubai: vib update file name power: discrete charger policy create force_chg_fail_clear dubai:input touch init setup Update goodix berlin touchscreen driver to v1.2.3 Power: discrete_charger policy create factory tcmd test node charging: optimize bc1.2 detect for sgm41542 DLKM/sar:optimise sx9375 driver on bo power: add get charing current api for discrete_charger_class power:fet_control: ironmn: Fix typo in chrg-fullcurr-en-gpio dlkm: add new regulator vibrator driver hall:fix not report issue pct1812_mmi: custom config options pct1812_mmi: report scroll gestures pd: add PD20/PD30 interface for tcpc pd: create pd adapter class charger/bq25890:export api for charger class goodix: support stylus mode switching. power: discrete charging solution intial version TCMD driver backlight: fix brightness flash issue Upgrade egis driver for supporting ET721 charging: fixed charging policy kernel panic Modify the config id and build id charger/bq25890: stop ADC when system shutdown sgm41542: provide some api for charger class charging: add discrete ics charging policy power: cw2217 fg's name rename to bms from battery power: rt9426a fg's name rename to bms from battery power: cw2217 fg add fcc/fcc_design info dubai: vibrator init setup power: rt9426a_fg introduce supprot muti-battery parameter func power: cw2217 introduce mutil-battery parameter func UWB: support build in kernel-5.10 sx937x:enable usb cal Charger/bq25890: force 5V/2A charging power: cw2217 fg update battery parameter power: rt9426a register charger_full node power: apply 1th battery parameter for CW2217 fg power:fet_control: Add logic for ironmn EVB HW 2nd Batt charger/bq25890:disable maxcharge handshake charger/bq25890:pull charge enable pin low when charge Revert "(CR) build: Only include modules needed by product" charger/rt9467:remove MMI_STOPSHIP change. Add a new DLKM to support smart pen charger driver Add OEM glink notification and notifier call chain charger/bq25890: add usb properties Resolve compilation errors for unused functions qti_glink_charger: extend addr&data to UINT32 typc: Open macro for TCPC charging: force 5V/2A solve the kobject_get_path undefined in gki build Only save test file in factory build sgm7220: add sgm7220 pwr interface charger/bq25890: force D+/D- detection for APSD typec: Open pd dbg info Does not distinguish 9916 and 9916P touch chips. touchscreen: dynamic check the goodix device status touchscreen: dynamic check the stmicro device status mmi_info: provide check dynamic device status interface xpeng: input touch add wait when single tap mmi_info: Get bootconfig from device tree utags: read utag block device path in bootconfig from device tree utags: Use bio to replace kernel_read and write API charger/bq25890:add BC1.2 feature rt1715:add debugfs interface for dump reg power/charger: add init bq25890 driver power: rt9426a_fg add soh api power: introduce fuel gauge cw2217b driver backlight: support backlight current align configuration for exp mode backlight: add lm3697 map type for linear or exponential mode backlight: add aw99703 map type for linear or exponential mode goodix: support factory tcmd test. goodix: update test file to 1.2.2 version charging: detect hw chip id before do any action Power: enable rt9426a fg parse dts function power/charger: add walkaround to fix REGN side effect power/charger: add free IRQ before reset goodix: enable stylus clock on Rogue project. charging: add HVDCP detected function backlight: don't enable aw99703 backlight while brighness level 0 pct1812_mmi: properly fail probe on i2c error Revert "(CR): mmi_charger: Fix battery_supply_init, batt_psy." power/charger: add rt9467 charger driver mmi_charger: Fix battery_supply_init, batt_psy. Support loadding multiple config files build: Only include modules needed by product pct1812_mmi: control debug messages pct1812_mmi: added input device pct1812_mmi: firmware update feature dlkm: add new silead fps driver Add sysfs to support force disable charging qti_glink: Add sysfs node to get wireless chip id add lpd and vbus present state Send LPD and VBUS uevent for LPD alarm feature vibrator: add new ldo vibrator driver Support touchscreen calss in the goodix drvier code. qti_glink_charger: move WLS property types to the end GKI kernel build upgrade build: Only include modules needed by product set screen default state to on dlkm: sd77426 modify battery NTC table fet_control: Add fet_control driver, full_current_en charging: add usb property charging: update sgm41542 driver V002 usb: mass_storage: Add support for SC_REBOOT typec: define sgm7220 typec func fix mass_storage module GKI build issue copy mass_storage driver from Kernel as initial version typec: improve rt1715 code typec: remove qcom pmic code arm/dts: improve rt1715 typec and pd compatible hall pen kernel bringup typec: Add sgm7220 driver initial version charging: add bc1.2 feature DLKM: force 5V/2A charging charging: fixed build error for sgm41542 default code charging: add SGM4154x charger basic driver pct1812_mmi: self-test and sysfs interfaces power: add detect sd77624 ic hw goodix_brl_mmi: Add mmi status check. Modify the goodix driver code format Update the poll mask when polling is aborted by hal mmi_sys_temp:fix compilation error. power: update sd77624_fg driver qti_glink_charger: Add sysfs node for factory wireless testing charge:Enable aicl at factory boot mode touchu:gc7372 tp modify for charger test and gesture usbnet:USBLAN Super speed plus support dlkm/wl2866d: disable avdd1 when device shutdown backlight: add aw99703 led boost configuration charge: define pps charge min out current charge: add limit main charge flag DLKM: Update SD77426 driver : Add panel notification for egis rbs driver regulator: fix aw37501 gki build error regulator: add aw37501 lcd bias power driver pd: Add rt1715 driver initial version Cypfq: dlkm: Gc7372 add enable/disable wake irq for single tap Support sensitivity mode function power: introduce sd77426 fuel gauge driver power: add rt9426a driver add glink oem command to get LPD info focaltech_v2_mmi: keep rst high when config only for IDC mmi_info: Increase the MAX_BL_BUILD_SIG Cypfq: dlkm: Add power off process for ili9882a Update goodix berlin code to V1.1.21 charge: notify mmi-smbcharger-iio while charge pump start working charging: Add PD charging in DLKM pct1812_mmi: firmware upgrade pct1812_mmi: pct1812ff kernel driver Cypfq: dlkm: Add charger detection feature for ili9882a mmi_annotate: support minidump store Support touch corner/edge suppression function. Cypfq: dlkm: Support single tap feature for gc7372 cp: Remove charge rate, age, cycle Cypfq: dlkm: Change read vendor id process hall driver bring up watchdogtest: support build in kernel-5.10 Cypfq: dlkm: Improve gcore_mmi driver Cypfq: dlkm: Add GKI module dir definition charging: modify heartbeat cycle to 100s remove the mmi_info module dependency dlkm: bo: Support single tap feature for ili9882_mmi charger: Rename sc8549 to cp xpeng: input touch add game api charger:adaptive charger tolerance optimization goodix_fod_mmi.ko: Update Makefile to compat kernel 5.10 Use bi_bootmode instead of mmi_bl_bootmode. When find drm panel successfully, set panel_status to 0 FPS: Support multi-fingerprint function. put register_panel_notifier into ts_mmi_worker_func. Delayed active panel detection backlight: fix lm3697 probe fail panic backlight: add lm3697 led boost configuration use bi_bootmode to query the bootmode Cypfg: dlkm: Improve gcore_mmi driver fixup! (CR): mmi_info: read all from bootconfig mmi_info: read all from bootconfig backlight: add lm3697 hbm current mode configuration mmi_info: read bootreason from bootconfig utags: reads bootdevice name from bootconfig qpnp_adaptive_charge: Add adap_reinit charge: resolve sc85xx charge icon dont disappear cp: improve 8549 read status register modules: add leds-indicator-pwm.c driver parallel:init thermal parameter at high temp Rogue PRC ST54x driver Close the calibration operation after fwupdate. Modify bm ulog and mmi chargers for Android S focaltech_v2_mmi: disable focaltech driver drm notify ffc: add ffc featrue CP: Remove unuseful code qc3p:workaroud qc3p shalcomm adapter Modify the touchscreen report rate CP: Use CP read battery voltage slg5bm43670: Update slg5bm43670 for Kernel 5.10 QC3P:add afvc compensation voltage PD:add afvc compensation voltage pstar: input touch update edge set pstar: input touch add edge support focaltech_v2_mmi: don't set gesture_mode enable as default Adjust the heartbeat time to 100s in discharging state sx937x:Android S bringup Solve the problem of incompatible type 'struct timespec64' Slove the build error: redefinition of 'panel_event' fpc_fps_mmi: Modify Makefile for Android S build ko adjust moto_f_usbnet driver makefile Bring up touchscreen_mmi in Rogue S project. Bringup stmicro_mmi touch module in kernel-5.10 Cypfg: dlkm: Improve gcore_mmi driver Revert "(CR) sx937x:mv ps_get_state to work callback" Revert "(CR) sx937x: change global_sx937x initialization position" Modify the ITO test command sx937x: change global_sx937x initialization position sx937x:mv ps_get_state to work callback qpnp-adaptive-charge: use mmi_charger to contrl battery charging add vote mechanism support for mmi_charger qc3p:limit pulse not beyond max count use disable_irq_nosync in interrupt handler Add force_charging_enabled sysfs Add force_charger_suspend sysfs CP: add cp switch enable detect CP: force disable CP while plug out usb cable CP:Add switch enable detect function cp: config sc8549 fault bit Fix the build error on denver project. add charger state sync interface Revert "(CR): send charge rate uevent when power supply changes" Need to update fw on resume for zero-flash touch IC. novatek: Support parameter upgrade method st21nfc:support build in kernel-5.10 qc3p:Set AICL thres at qc3p pmic charging dlkm: add enable CP api add power ctrl for fpc driver add power ctrl for goodix kernel driver aw8695: move camera start entry before the vibrator timer dlkm: Touch gc7372 bringup pstar: vibrator add moto fw Fix artificial vibrating pattern caused AF always on. charge: Add thermal interface qc3p:clear sm work when vbus off Add sense off process to enter the idle process. CP: add qc3p charge policy CP: Reorganize charge pump Print ADSP battery manager log if charging changes Create bm_adsp_ulog module qc3p:config 33W charging current sx937x:fix wrong POWER_SUPPLY_ONLINE define Cyprus: dlkm: ili9882 driver improvement input: focaltech_v2_mmi: add ft3519 upgrade function Solve the build error: MODULE_IMPORT_NS missing pstar: sar: support multi parameters for different panels aw8695: optimize vibrator&camera resonance issue Stmicro: Support parameter upgrade method Add flash mode sysfs node in touchscreen mmi dlkm: lm3697: free resouces when init failed DLKM: bring up corfup PD 30W charging charging: pick base parellel charger from mmi_parallel_charger send charge rate uevent when power supply changes bq25980:update charge VOUT parameter bq27426: Fix kbuild to use ANDROID_BUILD_TOP mmi_info: support build in kernel-5.10 mmi_annotate: support build in kernel-5.10 utags: support build in kernel-5.10 bos0614_mmi: fix alignment issue Enable PANEL_NOTIFICATIONS for berlna touchscreen Revert "(CR): fix user version build error" Add NVT_SET_TOUCH_STATE to avoid compilation errors Deleate fts_system_reset in wait_for_ready Add 30W turbo charger type touch mmi:declare dependency. dlkm: leds_aw99703: free gpio if init failed dlkm: leds_lm3697: add initial version lm3697 driver Fix berlna user version build error. Support novatek single tap in berlna fix user version build error sx937x:change offset val bit mask touch mmi:2nd patch, fix user version build error. touch mmi:Fix user version build error. charger:mmi_hb_wake lock not released SX937x: USE power online state bos0614: access to sysfs for others bos0614_mmi: waveform shape feature focaltech_v2_mmi: bringup ft3519 on kernel 5.4 qc3p:config ibus max to 3A mmi_parallel_charger:reduce charge rate report dlkm: Cyprus: touch: ili7807s bringup Add Egis fps kernel module for rbs Support report rate switch Add game mode parameter adjustment function input: goodix_v1510: change to api in chip vendor whitelist Add pollForEvent check mechanism smbcharger:QC3P charging support module:QC3P charging support init module:mmi parallel charger qc3p repo init bos0614_mmi: support rev C : Delete the calibration process on probe Support single tap to wake the device power:fet_control: Charge path gpio too slow Fix the BTN_TOUCH report error Solve the issue that firmware can not be updated. Add support for Build_external_kernelmodule.mk touch:sleep in atomic context input: goodix_v1510: set regulator avdd load to 50mA Do not set scan mode when setting charge mode use request_threaded_irq to handle TP events. focaltech_0flash: rm register_panel_notifier null define bos0614_mmi: fix few bugs input: focaltech_0flash_mmi: add panel notifications Report BTN_TOUCH event when the fingers are lifted. fet_control: banks: Enable only pm8350b chrg for usb2/3 sx937x: reset sar on i2c failures update the charger_suspend config in charger configure synaptics_mmi_class: fix broken build berlNA: support usb detection of novatek TP. Get usb status through POWER_SUPPLY_PROP_ONLINE property. stmicro: Add USB detection based on touch class ETS: Solve the compilation problem of androidR Support TP report rate switching regulator: wl2866d: support to read init value from dts Resolve compilation errors for nio Support touchscreen class for novatek Move sysfs node to the parent of battery device power: fet_control: Update paths on usb psy prop online qrng: Add qrng driver qti_glink_charger: Add sys node to pass TCMD to ADSP qti_glink_charger: Add sys node to set pmic_icl Resolve compilation errors with unused parameters "ret" Resolve compilation errors with unused parameters charge: add sc8549 driver for corfuP product Export panel supplier method for ST Use supplier to distinguish limit files. power:fet_control: Batt flip dischg fet ctl, chg cur_en qti_glink_charger: Add sys node to pass TCMD to ADSP input: goodix_mmi: add goodix i2c 1510 version driver qti_battery_charger_mmi: Initial add bq25890_mmi: Fix power supply type mmi_charger: Add voltage and current combos driver:adjust bq25960 parameter synaptics_mmi_class: gpio access func can sleep Add calibrate sysfs node for stmicro TP. synaptics_mmi_class: rename files bq25960:remove online property power:fet_control: banks flip batt fet-control driver mmi_charger: Add ext_charger bq25890: Add get/set for fcc and fv Revert "(CR) synaptics_mmi_class: fix build issue" bos0614_mmi: added features synaptics_mmi_class: fix build issue Support fw update at device startup for berlin. fixup! (CR) synaptics_mmi_class: banks cli bringup synaptics_mmi_class: banks cli bringup smb:integrate charge pump ffc feature stmicro_mmi: build and config ids Remove pressure events charger:bq25960 30w charger support charger:enable charger rate at 30w charger Enable irq during touch resume for berlin. pstar: input touch stm fix issue fixup! (CR) stmicro_mmi: bug fixes and new features stmicro_mmi: bug fixes and new features pstar: input touch fix disable irq panic Get the profile id from device tree Add new platfrom driver to support smb charger Add change to be more compatible Reorganize files to meet compilation mechanism on enabled GKI products. aw8695: Fix compilation error of aw8695 for android R Make Trustonic TEE driver module compatible with kernel 5.4. mmi_parallel_charger:enable parallel charger at R charge: Config charge rate for internal FG product Charge: Config step first current comp for CP Charge: config min tuning current Charge: Clear err flag before start CP mmi_parallel_charger: Add Turbo_30w power level charge:notify smb5 while charge pump start working dlkm: no need rerun aicl for odessa dlkm: add enable CP api mmi_parallel_charger: set charge_control_limit as writeable mmi_parallel_charger: UI support for 45W charger fg: soc report 99% lasted for long time mmi_pl_chg: Add mmi_cycle_count to calculate batt age mmi_parallel_charger: Add factory mode detect mmi_pl_chg: clear pmic limit after remove pd power mmi_parallel_charger: "battery" psy update PROP_STATUS mmi_parallel_charger: optimize 45w charger policy optimize the charging logic in thermal mitigation process Improve the PD charging performance in high temperature mmi_paralel_charger: Enhance the compatibility of PD charger mmi_parallel_charger: enhance the stability of sm work mmi_pl_chrg: improve the chrg recovery handling mmi_chrg_manager: optimize thermal mitigation logic mmi_pl_chrg: create some sysfs node for setting mmi_params mmi_parallel_charger: optimize temp zone structure mmi_parallel_charger: Optimize 40w charging logc, 1.0 mmi_parallel_charger: Optimize 40w charging policy mmi_parallel_charger: Create Heartbeat work DLKM: mmi_parallel_charger pstar: input touch support cqa test bq25890: commit initial version bq27426: guard extra batt props correct the charger present based on charger type pstar: input touch stm bring up dlkm: bo: Improve touch driver for novatek bos0614_mmi: build kernel code bos0614_mmi: initial reference driver mmi_charger: Option to start with no factory kill ... Conflicts: Documentation/devicetree/bindings~HEAD drivers/leds/trigger/Makefile drivers/misc/Makefile drivers/regulator/wl2868c/Makefile drivers/regulator/wl2868c/wl2868c-regulator.c drivers/regulator/wl2868c/wl2868c-regulator.h drivers/sensors/Makefile fs/exfat/Kconfig fs/exfat/Makefile fs/exfat/README.md include/linux/input/synaptics_tcm.h include/linux/panel_notifier.h sound/soc/codecs/Makefile Change-Id: I6fe680aa18c375828df04e8ea108d01361d780bf |
||
|
xizx
|
001270581f |
Reboot: trigger warm reset when receive hw_warmreset cmd
The "hw_warmreset" reboot command, it indicates the kernel to trigger warm reset for saving lastkmsg. After the system warm reboot, the AP will save last kmsg logs and call a clean cold reboot with the "post-hw_warmreset" command. Change-Id: I3a25735a4e9ff0ab72c05d3ba2914d80477d30dc Reviewed-on: https://gerrit.mot.com/1536789 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Zhenxin Xi <xizx@motorola.com> Submit-Approved: Jira Key Reviewed-on: https://gerrit.mot.com/1584107 Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> |
||
|
zhaoxp3
|
d177ede646 |
msm-poweroff: Store restart reason
After cold reset is introduced, the phone is cold reset instead of warm reset, such as panic. In this case, the power up reason saved in shared memory will be lost. Consequently, the power up reason on next boot up time will be normal boot instead of correct ones. To resolve this issue, we can use the two spared pmic registers which are power lost safe to save the restart reason for these cases. Motorola definition of AP panic bit set in extra info pmic reg conflicts with QC definition of Warm reboot bit set in extra info reg move Mot bit to available position to avoid conflict Force a cold reboot for the command "adb reboot bootloader" to avoid the warm boot when user tries to continue boot from boot menu. For early kernel panic before PMIC is initialized, the function qpnp_pon_store_extra_reset_info will fail. Need to set IMEM flag for fail safe in this case. For post-panic, post-wdt, post-pmicwdt reboot, we do cold reset. And set the PMIC register accordingly, to nofity BL the special reboot behavior. Configure panic as warm restart, so that we have chance to get panic logs. According to SR 01277290, 0x88D and 0x88E are spare registers for PMIC where we could store oem specific reset information Ported from: https://gerrit.mot.com/1446282 Change-Id: I6704c801435c6586dbe64259c214dcdc926b07cf Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com> Reviewed-on: https://gerrit.mot.com/1499584 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Wang Wang <wangwang1@lenovo.com> Submit-Approved: Jira Key |
||
|
tin_bingtai.zou_tmp
|
3fa32c60ae |
optimize aw963xx driver
1.optimization of secondary interrupt triggering logic for sar 2.modify driver aw963xx Change-Id: I81782749f4cc8c62be421316e9d367f0d9d92156 Signed-off-by: tin_bingtai.zou_tmp <tinno60@motorola.com> Reviewed-on: https://gerrit.mot.com/2585232 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: <yangyi31@motorola.com> Reviewed-by: Yuchang Guo <guoyc1@lenovo.com> Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key |
||
|
tin_bingtai.zou_tmp
|
99381ee852 |
optimize aw963xx driver && insert usb calibration
1.optimize driver about multiple mode 2.insert usb calibration(aw config flag in dts) Change-Id: I392f5cf266647abf3b6eb0aa649f8061d944871b Signed-off-by: tin_bingtai.zou_tmp <tinno60@motorola.com> Reviewed-on: https://gerrit.mot.com/2575217 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: <yangyi31@motorola.com> Reviewed-by: Yuchang Guo <guoyc1@lenovo.com> Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key |
||
|
tin_bingtai.zou_tmp
|
4b93d45e50 |
sar sensor bring up 1/2
1.sar sensor bring up 2.modify sx937x driver for secondary sar Change-Id: I3eef88077a14e7e1dab92c860406d0b1ee35a02c Signed-off-by: tin_bingtai.zou_tmp <tinno60@motorola.com> Reviewed-on: https://gerrit.mot.com/2552802 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: <yangyi31@motorola.com> Reviewed-by: Yuchang Guo <guoyc1@lenovo.com> Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key |
||
|
tnyangc
|
5540075a2b |
sar sensor bring up -aw
1.sar sensor bring up 2.add aw driver Change-Id: I42564cc4393fdbe30a63722d544b7e84c578a177 Signed-off-by: tnyangc <ramiel.yang@tinno.com> Reviewed-on: https://gerrit.mot.com/2554436 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: <yangyi31@motorola.com> Reviewed-by: Yuchang Guo <guoyc1@lenovo.com> Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key |
||
|
cuijy1
|
6e1740fd14 |
sx937x: add flip near & far reg list
when flip state change, modify reg list which read from dts Change-Id: I739c6fb5b1a531886b6fce527451633cb74af912 Signed-off-by: cuijy1 <cuijy2@lenovo.com> Reviewed-on: https://gerrit.mot.com/2514472 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
qiurp1
|
79cc991419 |
zeekr:modify capsensor driver
add lable to distinguish whether to calibration when flpi state change Change-Id: I00d386ee6c5dd70ba22b1fba3e22fb6cd5704b79 Signed-off-by: qiurp1 <qiurp1@lenovo.com> Reviewed-on: https://gerrit.mot.com/2498055 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Jiyue Cui <cuijy2@lenovo.com> Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
weimh1@motorola.com
|
c3949d41a0 |
sx937x: reset chipset instead of cali
1.porting from sx937x about re-initialize machanism 2.reset chipset instead of cali for bronco only, use dts to control it and will not impact other projects Change-Id: Ifd616a57863cdd96641440a5b2926ec9286f60ee Signed-off-by: weimh1@motorola.com <weimh1@motorola.com> Reviewed-on: https://gerrit.mot.com/2463575 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Lijun Chen <chenlj2@motorola.com> Reviewed-by: Huosheng Liao <liaohs@motorola.com> Submit-Approved: Jira Key |
||
|
wunan3
|
5739c4fae5 |
Devon:seperated DVT1/DVT2 sar sensor firmware
WHY:sar sensor need seperated firmware HOW:support multi firmware Change-Id: I2a77adb3dea88b57f9f4a85ad463f1d992dfdae4 Signed-off-by: wunan3 <wunan3@lenovo.com> Reviewed-on: https://gerrit.mot.com/2237527 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Hong Zhang <zhangh12@motorola.com> Reviewed-by: Wang Wang <wangwang1@lenovo.com> Submit-Approved: Jira Key |
||
|
qiurp1
|
bbbc9a2bce |
ONELI/LI: add calbration driver of capsensor
add digital headset calbration,usb_calbration, load parameter when flip far/near Change-Id: I766d7166c8b91c7a24763576e78adc2f99a76a9a Signed-off-by: qiurp1 <qiurp1@lenovo.com> Reviewed-on: https://gerrit.mot.com/2231946 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Jiyue Cui <cuijy2@lenovo.com> Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
longc100
|
70f8bc91e8 |
devon:sensors bringup
WHY:devon:new project sensors bringup HOW:fix aw9610x code,devon use ext ldo ctl by gpio Change-Id: I3af035617bfa383243d121c9eed0f61e423d2d6f Signed-off-by: longc100 <longc100@motorola.com> Reviewed-on: https://gerrit.mot.com/2205222 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Submit-Approved: Jira Key Tested-by: Jira Key Reviewed-by: Hong Zhang <zhangh12@motorola.com> (cherry picked from commit 1e9aa7f0f254143a03837fee68305dc0fa111e0e) Reviewed-on: https://gerrit.mot.com/2205886 Reviewed-by: Wang Wang <wangwang1@lenovo.com> |
||
|
cuijy1
|
6a64c7429e |
sar:add driver for multi sx937x
add driver for multi sx937x Change-Id: I0ec688cec7b7773f0ab4d578189e51da26122a4d Signed-off-by: cuijy1 <cuijy2@lenovo.com> Reviewed-on: https://gerrit.mot.com/2188738 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
huaqin79
|
0678779d3b |
sar: aw9610: Modify sar sensor voltage.
The power supply of sar sensor is changed from 1.7v to 2.8v to solve the problem of voltage jump Change-Id: Ia731c372ddce703743d3966ddf7e185e5225cb06 Signed-off-by: huaqin79 <huaqin79@motorola.com> Reviewed-on: https://gerrit.mot.com/2138719 Reviewed-by: Hong Zhang <zhangh12@motorola.com> SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key |
||
|
zhangh12
|
def94f695a |
sar: aw9610: the reference channel can't be seen on user layer
ref_channel will be tested failed on factory, it should be filter for user, add "ref_channel" on dts, it won't be registered to sensor_class. Change-Id: Ibc5c927d5441665066aba990ecab36dbd7d03e47 Signed-off-by: zhangh12 <zhangh12@motorola.com> Reviewed-on: https://gerrit.mot.com/2134407 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key |
||
|
zhangh12
|
484bae18fd |
sar: add aw9610 driver
add the driver of aw9610, modify the build scripts. Change-Id: Ic2be827fd281759c6184e68cfe5690f76642cc46 Signed-off-by: zhangh12 <zhangh12@motorola.com> Reviewed-on: https://gerrit.mot.com/2110739 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key |
||
|
Jiyue Cui
|
908e2bdb8b |
Revert "(CR) sx937x:mv ps_get_state to work callback"
This reverts commit c2f744d014225db0494144bcc874be8d0c3dbf13. Change-Id: I14be7ed2aefdd0522d70f6eb2ac2d7c9e2d8e254 Reviewed-on: https://gerrit.mot.com/1991079 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
cuijy1
|
b43fdec148 |
sx937x:mv ps_get_state to work callback
ps_notify_callback warnning for block function usb_psy_get_prop() mv ps_get_state to work callback Change-Id: I856879ccd0d727660bc92c945445a64b4a03fddb Signed-off-by: cuijy1 <cuijy2@lenovo.com> Reviewed-on: https://gerrit.mot.com/1977442 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Hong Zhang <zhangh12@motorola.com> Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
zhangh12
|
34605de176 |
sx937x: reset sar on i2c failures
porting from x933x, Re-initialize via a watchdog failure Change-Id: I5df7d15c9bc62d77940e7da1f57425d245bf5c86 Signed-off-by: zhangh12 <zhangh12@motorola.com> Reviewed-on: https://gerrit.mot.com/1935976 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Wen Xie <xiewen3@motorola.com> Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key |
||
|
zhangly19
|
b16994d232 |
DLKM/Sar:add abov 7ch driver
-add abov 7ch driver -add abov 7ch header file Change-Id: I0a7e5214c25157ae4fff07d22fd301b2e395637e Reviewed-on: https://gerrit.mot.com/1803336 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Jiacheng Ou <oujc1@motorola.com> Reviewed-by: Minghui Wei <weimh1@motorola.com> Reviewed-by: Nan Wu <wunan3@motorola.com> Reviewed-by: Wen Xie <xiewen3@motorola.com> Reviewed-by: Hujun Liao <liaohj@motorola.com> Submit-Approved: Jira Key |
||
|
weimh1
|
4e93c431df |
driver/sar-sensor: sx937x bring up
1.update paramters 2.adjust driver to match new params Change-Id: I3affc71bce80ca8ce1558179df1f4305640df163 Signed-off-by: weimh1 <weimh1@lenovo.com> Reviewed-on: https://gerrit.mot.com/1801960 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Huosheng Liao <liaohs@motorola.com> Submit-Approved: Jira Key |
||
|
zhangh12
|
e222b9be7f |
[capsensor] add debug info for read_rawdata
venor provide a new driver for adding some debug messages on read_rawdata(). cmd: adb shell "logcat -b kernel | grep SMTC_D" Change-Id: I0e0ebc09d48b1d34d40d581f9a3cdf43dcd7cf97 Signed-off-by: zhangh12 <zhangh12@motorola.com> Reviewed-on: https://gerrit.mot.com/1773854 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Wen Xie <xiewen3@motorola.com> Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key Reviewed-by: Jiyue Cui <cuijy2@lenovo.com> |
||
|
weimh1
|
d2c353851a |
driver/sar-sensor: add sx937x base driver
1.semtech sx937x support multi channels(6/7/8) 2.add sx937x to bo common branch Change-Id: If434ed22b6c92fe3612bda882bee8eb7405fe8f7 Signed-off-by: weimh1 <weimh1@lenovo.com> Reviewed-on: https://gerrit.mot.com/1779278 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Huosheng Liao <liaohs@motorola.com> Submit-Approved: Jira Key |
||
|
tnlizd
|
a88706793f |
sx9338: sar sensor bring up
caprip: 1. add sx9338 sar sensor support Change-Id: If1357134f8b0e4b2d420c3ff444aedde31ed243d Reviewed-on: https://gerrit.mot.com/1758991 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Jiyue Cui <cuijy2@lenovo.com> Reviewed-by: Lijun Chen <chenlj2@motorola.com> Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key |
||
|
chenlj2
|
6cb005d0f4 |
DLKM:modify capsensor_enable_flag_t enum for abov
abov chip works abmormal in Qsensortest APK branch:bo Change-Id: I66a1bdef56162c46e4c5fa094394e15cd4f88d47 Signed-off-by: chenlj2 <chenlj2@motorola.com> Reviewed-on: https://gerrit.mot.com/1718306 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Wen Xie <xiewen3@motorola.com> Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
chenlj2
|
6bcd3fe49e |
DLKM:control VDD off when sar sensor is off
It's used to save power. It's only used on Borneo NA Change-Id: I2aa60149f0a362dc29fc0eded5c509a9fd4ddc7c Signed-off-by: chenlj2 <chenlj2@motorola.com> Reviewed-on: https://gerrit.mot.com/1718145 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Jiacheng Ou <oujc1@motorola.com> Reviewed-by: Guoyue Liu <liugy11@motorola.com> Reviewed-by: Wang Wang <wangwang1@lenovo.com> Submit-Approved: Jira Key |
||
|
Ryan Lattrel
|
e5ce10d03d |
sx933x: reinitialize via i2c watchdog
Re-initialize via a watchdog failure instead of a general i2c failure. This will allow us to recover from failures that happen during init, and re-init. The current solution does not account of the fact that init could fail, and if init fails there l(CR) won't be an interrupt that will drive the i2c read/write failure to cause a recovery. This should also reduce false postives, such as if we failed to read i2c while suspending/resuming. Change-Id: If7579a90c6490d5f9c4fec4c0d3e7b74cb8bdcaa Signed-off-by: Ryan Lattrel <ryanl@motorola.com> Reviewed-on: https://gerrit.mot.com/1690483 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Ling Jin <lingjin@motorola.com> Reviewed-by: Konstantin Makariev <kmakariev@motorola.com> Submit-Approved: Jira Key |
||
|
Ryan Lattrel
|
420066548b |
sx933x: reset and re-init the device on i2c failures
If we get an unexpected i2c failure, toggle the ldo and re-init the registers after it is back online. Change-Id: Ie17a208fb612264a6ddc8cb5fff16e3123b5719e Signed-off-by: Ryan Lattrel <ryanl@motorola.com> Reviewed-on: https://gerrit.mot.com/1672836 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Ling Jin <lingjin@motorola.com> Submit-Approved: Jira Key |
||
|
chenlj2
|
3ab651e580 |
DLKM/sar:optimise process of sar to support 4 channels
compatible with 3 and 2 channels support 4 channels only in borneo the sar chip default support 3 or 2 channels Change-Id: I0a594fe18ebff2679b0ada26646f44b50afce67f Signed-off-by: chenlj2 <chenlj2@motorola.com> Reviewed-on: https://gerrit.mot.com/1640530 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Wen Xie <xiewen3@motorola.com> Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key Reviewed-by: Jiacheng Ou <oujc1@motorola.com> |
||
|
cuijy2
|
e51af2ddaa |
capsense sx933x recive headset state
when headset insert use special reg config NO_PROP_NEEDED: only racer need this change Change-Id: Iaea4faf18b5fce845a05f7262b2e683e1e37c16b Signed-off-by: cuijy2 <cuijy1@motorola.com> Reviewed-on: https://gerrit.mot.com/1539481 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Guoyue Liu <liugy11@motorola.com> Reviewed-by: Tao Sun <suntao2@motorola.com> Reviewed-by: Wen Xie <xiewen3@motorola.com> Submit-Approved: Jira Key |
||
|
Ryan Lattrel
|
9f28f0ef46 |
sx933x: update registers on open/close
Update configured registers on open and close events if set in the device tree. Change-Id: I004f519e1dd5851a93affab81598969509f27712 Signed-off-by: Ryan Lattrel <ryanl@motorola.com> Reviewed-on: https://gerrit.mot.com/1543714 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Konstantin Makariev <kmakariev@motorola.com> Submit-Approved: Jira Key |
||
|
chenlj2
|
d52429660e |
DLKM/sarsensor:add tcmd test interfaces for abov mmi
1. add fw_download_status sys interface; 2. add int_state sys interface. port form: https://gerrit.mot.com/#/c/1539901/ Change-Id: I809e33078d66fe04b1b3678a690e5e19c7bdddf0 Signed-off-by: chenlj2 <chenlj2@motorola.com> Reviewed-on: https://gerrit.mot.com/1540822 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Wen Xie <xiewen3@motorola.com> Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
Wen Xie
|
321c070657 |
DLKM/sar: Add fw mode detection for A96T346HW.
guam sar bringup: Add fw mode detection for A96T346HW. Change-Id: I81a0f4802fda3b276b870a3fa758528871d31a4a Signed-off-by: Wen Xie <xiewen3@motorola.com> Reviewed-on: https://gerrit.mot.com/1509854 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com> Submit-Approved: Jira Key |
||
|
chenlj2
|
58f3ac5c7a |
DLKM/sar:optimise driver of Abov 5 channels
log output process extract name of input and cdev to dts Change-Id: I554cb2e24be6ea4038d9106e2e7fc85b5b7e24c5 Signed-off-by: chenlj2 <chenlj2@motorola.com> Reviewed-on: https://gerrit.mot.com/1498941 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Wen Xie <xiewen3@motorola.com> Reviewed-by: Jiyue Cui <cuijy2@lenovo.com> Reviewed-by: Jiacheng Ou <oujc1@motorola.com> Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
linhonglei
|
1ac4f19994 |
kernel/sar: update a96t driver to support two channel
Modify driver files and read properity channel number node Distinguish two channel number or three channel number Change-Id: I9a00992c9875e94fe00711e92d6f74121327fb6b Reviewed-on: https://gerrit.mot.com/1478286 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: <honglei.lin@ontim.cn> Reviewed-by: Jiacheng Ou <oujc1@motorola.com> Reviewed-by: Jun Weng <wengjun1@motorola.com> Reviewed-by: Jianqiu Huang <huangjq9@motorola.com> Reviewed-by: Lijun Chen <chenlj2@motorola.com> Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
litong
|
9c5394f8c2 |
Synaptics updated driver code to V2
TP: The touch driver code is updated to second version of synaptics. Change-Id: Id460de3197aaee25cefeab918923212a484c8346 Reviewed-on: https://gerrit.mot.com/1468558 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Jialei Hao <haojl2@motorola.com> Reviewed-by: Jianqi Yang <yangj@motorola.com> Submit-Approved: Jira Key |
||
|
Fei Mao
|
7a00f7c254 |
input: touchscreen: synaptics_tcm: enable touch driver
Enable touch driver in touch driver. Support drm_panel callback to be notified when screen on/off. Add new property "synaptics,firmware-name" when different modules with same touch IC. Change-Id: I58159ce531913108e702227c5474fdc2f539d2d3 Signed-off-by: Fei Mao <feim1@codeaurora.org> |
||
|
chenx
|
2d484f105c |
input: touchscreen: synaptics_tcm: add new touch driver
This is the reference driver source code for Synaptics touch. Change-Id: I6ad3cd7d3b4d1f0f38d788cdbebc1bbcd6500c93 Signed-off-by: chenx <chenxiang0527@thundersoft.com> Git-commit: 9397899342e9aed76898cd7f1377a798d8ae3243 Git-repo: https://source.codeaurora.org/external/thundersoft/ihvjointlab/sensor-driver/log/?h=Synaptics_tcm_v1.3 Signed-off-by: Fei Mao <feim1@codeaurora.org> |
||
|
cuijy2
|
9e562a85c2 |
factory:add sx9331 interrupt line test for doha
add sx9331 interrupt line check node int_state tcmd_send 009b03 Change-Id: I4187bfac87e829d2e3e2b9f19e84cbb8cd6dac65 Signed-off-by: cuijy2 <cuijy1@motorola.com> Reviewed-on: https://gerrit.mot.com/1445145 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Guoyue Liu <liugy11@motorola.com> Reviewed-by: Tao Sun <suntao2@motorola.com> Submit-Approved: Jira Key |
||
|
huangjq9
|
a143cdade2 |
sar-sensor: fix some issue about a96t
- fix the sensors enable/disable confusion; - fix the initial mode is not in stop mode for a96t; - fix the issue about the update work; the initialize(this) no calling under mutex_lock; - fix the detection about above_detect(), the max time is 75ms. so, we need set the detct time to 100ms. Change-Id: I070c908fcb8edadb4dad51fa7a749e912d19f0a1 Signed-off-by: huangjq9 <huangjq9@motorola.com> Reviewed-on: https://gerrit.mot.com/1414619 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Huosheng Liao <liaohs@motorola.com> Submit-Approved: Jira Key |
||
|
huangjq9
|
862d3dc87e |
cap-sensor: fix some issues for a96t346.
- change the sensor name to top/bottom_left/bottom_right. - if the upper layer doesn't disable capsensor, we should let it enter sleep in suspend. about the average current of abov's a96t346: active mode: 1.8 mA; sleep mode: 160 uA; stop mode: 2 uA; Change-Id: I4ce68cb428d225a7843424e2a3b11f925392de2e Signed-off-by: huangjq9 <huangjq9@motorola.com> Reviewed-on: https://gerrit.mot.com/1411693 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Lijun Chen <chenlj2@motorola.com> Reviewed-by: Wen Xie <xiewen3@motorola.com> Reviewed-by: Hujun Liao <liaohj@motorola.com> Submit-Approved: Jira Key |
||
|
huangjq9
|
b14e4bdafb |
sar-sensor: add sar-sensor drviers
vendor: Abov device: a96t346 Change-Id: If31c6f873d51eb17fb7d285aa29d5c68d03f3731 Signed-off-by: huangjq9 <huangjq9@motorola.com> Reviewed-on: https://gerrit.mot.com/1399966 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Huosheng Liao <liaohs@motorola.com> Submit-Approved: Jira Key |
||
|
huangjq9
|
57b272c252 |
sofia: sx933x: Compatible with external LDO.
The default driver uses the PMIC's LDO output. The sofia project uses an external LDO power supply. Make the driver compatible with external LDO power. Change-Id: I0a7d42dbbbd3ae80e65bcd742309f99c532d39f1 Signed-off-by: huangjq9 <huangjq9@motorola.com> Reviewed-on: https://gerrit.mot.com/1379366 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Wen Xie <xiewen3@motorola.com> Reviewed-by: Lijun Chen <chenlj2@motorola.com> Reviewed-by: Huosheng Liao <liaohs@motorola.com> Submit-Approved: Jira Key |
||
|
xigualu
|
506d47114a |
input: touchscreen: synaptics_dsx: add new touch driver
This is the reference driver source code for Synaptics touch driver. Change-Id: Id35f12526ba8d8dfe114a0ec337060e7df9877bb Signed-off-by: xigualu <luxh0702@thundersoft.com> Git-commit: 648ee265de0dc2d852719b730fd1dfab153f7f55 Git-repo: https://source.codeaurora.org/external/thundersoft/ihvjointlab/sensor-driver/commit/?h=Synaptic_dsx Signed-off-by: Xin Hua Lu <luxinhua@codeaurora.org> |
||
|
Rick Huang
|
cb4493d8b8 |
input: touchscreen: st: add touch notification when suspend
When tap or swipe in a dedicated region, tp driver will notify the subsystem/driver who has registered. And this feature is not enabled by default; write the sysfs node to enable it by demand. Change-Id: Ie6312e8a0680b0abb9fed9a647bc9cee36985286 Signed-off-by: Rick Huang <rhuang@codeaurora.org> Signed-off-by: Fei Mao <feim1@codeaurora.org> |
||
|
Ryan Lattrel
|
ca50551fda |
sx933x: add recal on flip
Recalibrate the capsensor when the extcon flip device is changed. Requires an extcon parameter in the device tree node. Change-Id: I7a7408a064620fdd67a55a7f2f877d4a3542bf00 Signed-off-by: Ryan Lattrel <ryanl@motorola.com> Reviewed-on: https://gerrit.mot.com/1290732 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Konstantin Makariev <kmakariev@motorola.com> Submit-Approved: Jira Key |
||
|
David Collins
|
47598dd0e8 |
input: misc: qpnp-power-on: add support to power off a modem chip
Add support to power off an attached modem chip via its primary PMIC. Change-Id: I74ef989f15cb8821c1543da76cc92526b1a4ec99 Signed-off-by: David Collins <collinsd@codeaurora.org> |
||
|
hujing3
|
6f0074005e |
DLKM: focaltech tp firmware support for ft5446
surfNA: focaltech new ft5422u IC support add new ft5446/5422u firmware upgrade logic Change-Id: I91f8bd41f6ea4cc2d7cd8999e3d4e87ee8742918 Signed-off-by: hujing3 <hujing3@lenovo.com> Reviewed-on: https://gerrit.mot.com/1285518 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Wei Deng <dengwei1@motorola.com> Reviewed-by: Wang Wang <wangwang1@lenovo.com> Submit-Approved: Jira Key |
||
|
Ryan Lattrel
|
53d25de060 |
sx933x: calibrate on phone present
Limit the recalibration on phone power supply events to present changed. Change-Id: I6c6a49820ef93c3062c13c56aa3322b495ea40b4 Signed-off-by: Ryan Lattrel <ryanl@motorola.com> Reviewed-on: https://gerrit.mot.com/1279109 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Kenneth Kessler <kennykessler@motorola.com> Submit-Approved: Jira Key |