Trigger xt logging getparam at every playback close
and store data. When app queries sys/class node, return
stored values and reset to 0 for some params as per
app requirement.
Change-Id: Ice1a3e9a7e03062390f1c36184a971635e55d450
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Implement get param for AFE_PARAM_ID_SP_RX_TMAX_XMAX_LOGGING
in order to get excursion params from DSP.
Change-Id: I5129938c51c6f6ede9d4703d13be60d04d26f5e3
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
With speaker protection in v-validation mode, speaker
samples can be tested in early factory mode. Add
support for v-validation feature from driver.
Change-Id: I92493d6d2784cf4dd58021746bffe01180f89d23
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add v-validation feature support for set config for
wait time and validation time and get param
for status/vrms result of speaker.
Change-Id: I1bd91fbe17113a21c881e1ec1c735c50a963a692
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
The wcd-spi-ac (access control) driver exposes character
device to userspace to indicate information regarding
WCD SPI usage. Add uapi header file with the commands
and data expected by the character driver.
Change-Id: I41dfc3181041c7e7a1bad8695fa723d3a965036b
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Add support to process ec at channel count other than the
playback channel count by providing ability to set downmixed
channel count and downmixing weights to be used to downmix
ec ref data obtained from playback path.
These configs would be used to explicitly configure MFC module
present in ec ref path, for usecases where ec processing cannot
be done at playback channel count due to algorithmic or resource
limitations.
Change-Id: Iaa80a0f0da3697c55751b2201578252d6466d3b5
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
When ADSP is in power collapse or island state, it would fail
to access LPASS codec register.Vote for LPASS core to avoid
LPASS power collapse with pmruntime approach while accessing
LPASS registers & TLMM.
Change-Id: I74d037e499fb6f1245b9a1bd1b0a77200608c27b
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Handle media format update events from ADSP in case of DSP loopback.
Change-Id: I4004759cc77a05f46106d359417f97f0326af19d
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Allow to mark entries in a channel map as unused to prevent mixing other
channels in that slot.
Change-Id: I06f7de932dec4d30b2d6cfe04460d07ddad89049
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Add support for Aptx Adaptive decoder. Introduce flag
to indicate ABR feedback decoder configuration to
differentiate from regular decoder configuration.
Change-Id: I272e0a9572a56e878f7ad1385514b3be7010145a
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
FLUENCE_EF module in COPreP topology doesn't support
44.1Khz sample rate. Set sample rate to 16Khz for
VPM_TX_DM_FLUENCE_EF_COPP_TOPOLOGY, which contains
FLUENCE_EF module.
Change-Id: I527da1a70cacba1014b2a706216172d12066b909
Signed-off-by: kunleiz <kunleiz@codeaurora.org>
cdc pinctrl needs to be loaded for both v1 and v2 wcd
core objects.
Change-Id: I4742e96b54bbd481583a6d12fd32fddb63216077
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add voice MHI driver to support the following features -
1. Allocate and map mailbox memory needed for voice call
packet exchange.
2. Send memory mapped addresses to ADSP.
3. Vote MHI host driver at start and stop of a voice call.
Change-Id: I8ef8bc270acacab9b80bca7addccdf73bd572adf
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Add a new API for mapping DMA resources
that needs to be attached to existing
SMMU SID.
Change-Id: I7a513d24ea30a5ead318e856e4c5317743fd0021
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Enhance Channel Mixer control for MultiMedia Frontends to
get custom channel mixer coefficients from userspace and
use it during device routings to control stream to device
channel mappings.
Change-Id: Ifedac25de5ae6bad1092b66ec405bba66a80f608
Signed-off-by: Cong Tang <congt@codeaurora.org>
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
VA macro on Kona has three TX codec DMA interface. The
current AFE driver only supports two codec DMA interface.
Add support to enable the third one in AFE driver.
Change-Id: Ie0f6241ef37bc03ad9adb1c4fe82f82468caec25
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
VA macro in Kona has three DMA TX ports. Add a new VA
DMA TX CPU DAI in the DSP DAI driver to use it on Kona.
Change-Id: Ic144dbed1bd63af6f0150f854fdb74d57e156839
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
BT sink devices have a limitation on the packet sizes
they can receive and handle from BT sources. AAC encoder
can produce output frames which can vary in size based on
content being encoded. If frame size exceeds MTU size of
BT sink device, it will lead to incorrect decoding of
frames in BT sink.
Add a frame configuration parameter (MTU/Peak bitrate)
for AAC encoder to solve this problem.
Change-Id: Ia7795049e982400b0b3657b0b3a8990fc6920e38
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
Update symbolic link for internal.h, core.h and pinctrl-utils.h for kona.
Change-Id: I3bb585700a531e97a0b1b163b191105628f3d22c
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Different platforms have different configuration for soundwire
ports. Add support to get the port configuration information
from the machine driver.
Change-Id: If2c006c4d4a43e2a8dc67c076f6d1c0f36eae16b
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
- AFE_LOOPBACK_TX BE is the dummy backend created to
establish the EC reference capture path. While
opening COPP pass playback port id instead of
AFE_LOOPBACK_TX to get reference stream data from
AFE RX port.
- Add session type support in creating new COPP and
while checking for existing COPP.
CRs-Fixed: 2080421
Change-Id: I979f3ce1009cc18ff14130bebb8bd51a78fbe5ac
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add support to get DOA tracking monitor data.
This is required to support SVA LED display feature with
FFECNS/FFNS enabled.
Change-Id: I7e39c2f3998fcc3f9ed0767c0090f862e1ba7539
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
Add dai driver and routing driver changes for
afe loopback BE. This BE is used to capture
EC reference data.
Change-Id: Ia57f335bde5f8a47de0030fbf1cdb784c8821e17
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add support to enable mono mode when one TWS+ earbud is
connected. Change the encoder config when device switches from two
earbuds to single earbud.
CRs-Fixed: 2341876
Change-Id: I880aa6a2767d88e99be2d80afff0e5fbec94b8a4
Signed-off-by: Manisha Agarwal <maniagar@codeaurora.org>
Add soundwire API to wakeup soundwire master and slave devices.
These APIs will be used by slave driver to vote and unvote for
master wakeup, when it requires master for register access
operations. Master will be aware of the slave usage with the
vote for device wakeup.
Change-Id: Ifa93f35ab2cffba778cd2fd9a2461e5a58445b75
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
snd_soc_platform_driver is removed in kernel-4.19.
Update snd_soc_platform_driver to snd_soc_component_driver.
Change-Id: I434b6fd173d1f4365a610d9164342d5d04d6c5bc
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Switch audio drivers to SPDX identifier on msm-4.19.
Change-Id: Ic3f0230a516db251b8d81e8a7e73dbc04d66fe1b
Signed-off-by: Meng Wang <mengw@codeaurora.org>
The two arguments in functions wcd_request_irq, wcd_free_irq,
wcd_enable_irq and wcd_disable_irq have same identifier names.
Correct wcd_irq_info identifier name to fix compile error
Change-Id: I6f240d3af1cd253336d070d0f3228eae96a4fcb6
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Linux Build Service Account