Used to fix the failure of the probabilistic startup identification module
Change-Id: Id37309cd0e2e448e4989cea8ae098cd36d47e889
modified: fpsensor_spi_tee.c
Reviewed-on: https://gerrit.mot.com/2172960
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: liujian <liujian24@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
WHY:Makefile is wrong and enables power control for all products
WHAT:Modify makefile to enable power control only on Hawao
Change-Id: If50e4154c0baf80be6bc30744d98a4bc7270ecce
Reviewed-on: https://gerrit.mot.com/2171657
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: liujian <liujian24@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
After the VDD is powered on for more than 1ms ,
The RST is powered on
Change-Id: I7c49dc6cbaab0a9dee0ae8642a9de13db971f51b
Reviewed-on: https://gerrit.mot.com/2167042
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: <leiyun@wingtech.com>
Reviewed-by: Lijun Chen <chenlj2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
WHY:FPS sensor will be overheating due to impact damage to FPS
WHAT:Enable power gpio in Chipone FPS driver so that it can disable power
when overheating.
Change-Id: Ie32e69870cbcc53f6fafd97ac0068f79b66afbaf
Reviewed-on: https://gerrit.mot.com/2166844
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: liujian <liujian24@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
add build control for focal
support DRM screen status interface
Change-Id: I9a5ead1b52a2a287785cf0db38cceeb08c206623
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2163372
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
FOD will turn on/off frequently, msleep will take longer delay than
expected, use mdelay to optimize the power up time.
Change-Id: I9c4d23f0c3b98713eeee7bb1393106ebac507af4
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2157879
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Control gpio switch and regulator of fingerprint according to
the configuration of device node.
Change-Id: I2c581df3a88cf02089f0e8edd9f45ea09715c2e5
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2132820
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Dubai will use ET721 Fod sensor, need to upgrade
egis rbs driver to support FOD.
Change-Id: I5974aafe1cc3d85caae3260fdfa4095beda6a4c7
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2071992
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Silead fingerprint sensor is a new chipset and vendor
Add new driver to support it.
Change-Id: Ibbad53b820b527e4d4e42af9c6f7ec5718d1d6dd
Signed-off-by: wuwl10 <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/2062795
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Zhong <zhongl1@motorola.com>
Reviewed-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Egis:
Update the poll mask when polling is aborted by hal to support polling
wait forever. do not impact previous 30ms polling mechanism.
Change-Id: I1f6a2adb38f0282e944dde60539cd51179f5c733
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2053956
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
motorola/kernel/modules/drivers/input/misc/goodix_fod_mmi/Makefile:
updated to compat kernel 5.10
For Rogue, on SM8450, with kernel 5.10 based, kernel modules should use
the new version of Makefile.
Change-Id: I5094768f8d86179b981c07a1a15710555d3bad83
Signed-off-by: chengql2 <chengql2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2021379
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Reviewed-by: Shunde Jiang <jiangsd2@motorola.com>
Submit-Approved: Jira Key
Control gpio switch and regulator of fingerprint according to
the configuration of device node.
1. Use gpio switch if fp-gpio-ven is defined and valid.
2 .Use regulator control if rgltr-ctrl-support is defined and relevant
vdd, voltage range is valid.
Change-Id: Ia5e71c08306835e4d93552dbc037beb78fca39db
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/1971796
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Control gpio switch and regulator of fingerprint according to
the configuration of device node.
1. Use gpio switch if fp-gpio-ven is defined and valid.
2 .Use regulator control if "rgltr-ctrl-support" is defined and relevant
"fp,vdd" and voltage range is valid.
Change-Id: I40acd3abdba285a41f258d51b62f92a59c6796c7
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/1971397
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Not defined CONFGI_PANEL_NOTIFICATIONS, so the module does not depend on
the msm_drm.ko, so there is no need to add the kernel symvers.
This reverts commit 976d0428b82bdf3b44b2affdc67a0e18f40a72e3.
Change-Id: If84d0e09157d13c6731df33ac032e7bee53d0e0b
Reviewed-on: https://gerrit.mot.com/1960482
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
When link binary object, panel_register_notifier is undefined,
No kernel symbal table was imported.
Change-Id: I539793e5aa2bd2d27d8ed9b959d9bef86739b26c
Reviewed-on: https://gerrit.mot.com/1957707
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Submit-Approved: Jira Key
Need to allow group others to access driver interfaces in sysfs
Change-Id: Ic83b07674ee5396abc58aae3cf21ddf883c3196b
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1934267
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Haptics waveform has shape up and shape down settings that were not
availbale through sysfs set_waveform interface. This change adds an
extra parameter allowing for waveform shape to be specified.
Includes some code cleanup as well
Change-Id: I1901b69520515d79f1f6ccf4d701fc373aab74e9
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1952944
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Update kernel driver to support revision C of BOS0614
Change-Id: I025f5f9e8bf8d17eb92bcf0e1f7f940c4238e3d8
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1938220
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Includes the following fixes:
1) waveform ID in autoplay
2) signed and unsigned representation
Waveform ID cannot be limited to 0&1 only.
While it's not affecting values assigned to the corresponding
parameters, it's weird to see wrong value printed in kernel log
Change-Id: I32df3ad88c1917ed33f6264c3afe672693339bdb
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1942571
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Added the following features:
1) BOS0614 registers dump sysfs
2) reading device tree and applying default config
in case of power cut
Change-Id: I53f1b7069ea4d74aa8b02ac525765951fe29bcce
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1889879
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
motorola/kernel/modules/drivers/input/misc/goodix_fod_mmi/gf_spi.c:
Add the soft dependency of gpio-pcal6408:
MODULE_SOFTDEP("pre: gpio-pcal6408");
Pioneer (alias: banks) wires a GPIO PIN from expander IC TCA6418 for
the reset PIN FP_RST_N of fingerprint sensor GF3626.
So, the fingerprint sensor driver has a dependency on the driver of
GPIO expander.
Change-Id: I3bae36c1b87bc0c3f50fd5a1b57511b90cc5771f
Signed-off-by: chengql2 <chengql2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1855475
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
For multi fps sensor, if there was some unexprect
INT signal comming during sensor being remove,
IRQ handle will panic becase the sysfs kobj had
ben free. Disable the irq to avoid this.
Change-Id: I2144c6f803547c281830058b29438b9d71cd5933
Signed-off-by: wuwl10 <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/1853153
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Make the vl53l5 Kernel driver compatible for both 32bit and 64bit
applications from userspace, including L5 test program, factory TCMD
and camera app through L5 Sensor HAL.
Change-Id: Ia0ce2db08de83f7ab6ff487660ccd2bd21b48a14
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1831972
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
goodix fps driver is used by capacitive fps sensor as well, however
mmi_relay is required by FOD module only, so add the mmi_relay module
under conditional.
Change-Id: Ib93a2a7f9f8c8254cd67b7882336e9b7751e9863
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/1808891
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-by: Lijun Chen <chenlj2@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
"kernel_halt" is not in Google's GKI whitelist, add modules.symvers of
QGKI to fix build error on GKI build.
This module is no must in GKI, it doesn't matter that fails to load
Change-Id: I77c89c1236bcd2352b85b69e180687744e1f59b4
Reviewed-on: https://gerrit.mot.com/1807425
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
For linux 5.4, vfs_write will not be used, and it is changed to kernel_write,
so, we add the version judgment for this.
Change-Id: Iec34f046e608ec42436a741784aeeb9a1f46f479
Signed-off-by: weiweij <weiweij@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1806106
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
motorola/kernel/modules/drivers/input/misc/ets_fps_mmi/ets_fps.*:
Add panel notifier and ioctl command GET_DISP_PANEL_STATUS
To get the display panel status, register panel notifier to monitor the
events of PANEL_EVENT_DISPLAY_ON and PANEL_EVENT_DISPLAY_OFF.
And, add an ioctl command GET_DISP_PANEL_STATUS to support HAL service
querying for the panel status.
Change-Id: Ife5b6bc48517234b12c780af44dffaf4a1ad96e5
Signed-off-by: chengql2 <chengql2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1794293
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Submit-Approved: Jira Key
Register the mmi_relay notify to send the FOD state change
events to touchscreen class.
Change-Id: I532196304deac0788807652a0c636d41397c5802
Reviewed-on: https://gerrit.mot.com/1798309
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
tinno18