TP:
When sending multiple commands at the same time, the ack signal of
unexpected commands may be read, resulting in command sending errors.
Change-Id: I6f222a20725f5adc1509a01bd29f972c3171e56d
Reviewed-on: https://gerrit.mot.com/2178632
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Modify:
- Add the configuration for txd ili7807s.
- Change the ic name to ilitek_txd for CQA test.
Change-Id: I61ebc4ea91dbb0e016589ff3938a31f727514144
Reviewed-on: https://gerrit.mot.com/2176648
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Used to fix the failure of the probabilistic startup identification module
Change-Id: Id37309cd0e2e448e4989cea8ae098cd36d47e889
modified: fpsensor_spi_tee.c
Reviewed-on: https://gerrit.mot.com/2172960
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: liujian <liujian24@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
WHY:Makefile is wrong and enables power control for all products
WHAT:Modify makefile to enable power control only on Hawao
Change-Id: If50e4154c0baf80be6bc30744d98a4bc7270ecce
Reviewed-on: https://gerrit.mot.com/2171657
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: liujian <liujian24@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
After the VDD is powered on for more than 1ms ,
The RST is powered on
Change-Id: I7c49dc6cbaab0a9dee0ae8642a9de13db971f51b
Reviewed-on: https://gerrit.mot.com/2167042
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: <leiyun@wingtech.com>
Reviewed-by: Lijun Chen <chenlj2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
WHY:FPS sensor will be overheating due to impact damage to FPS
WHAT:Enable power gpio in Chipone FPS driver so that it can disable power
when overheating.
Change-Id: Ie32e69870cbcc53f6fafd97ac0068f79b66afbaf
Reviewed-on: https://gerrit.mot.com/2166844
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: liujian <liujian24@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
add build control for focal
support DRM screen status interface
Change-Id: I9a5ead1b52a2a287785cf0db38cceeb08c206623
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2163372
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
TP:
1. Open the esd check function,when the touch IC dies, it can be
restored to normal by hardware reset.
2. Increase the delay between the stylus command and the clock to
prevent the IC from hanging up.
Change-Id: I20617d63c0d53d60d1100b9eb26182096c657b16
Reviewed-on: https://gerrit.mot.com/2164520
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
When the screen is off, the TP driver starts to read gesture events
after receiving the interrupt.But I2C bus is still in the suspended
state, so gesture events cannot be read out.
geni_i2c_xfer System suspended
[GTP-INF][goodix_i2c_read:82] I2c read retry[1]:0x10308
geni_i2c_xfer System suspended
[GTP-INF][goodix_i2c_read:82] I2c read retry[2]:0x10308
[GTP-ERR][goodix_i2c_read:87] I2c read failed,dev:5d,reg:10308,size:26
[GTP-ERR][gsx_gesture_ist:236] failed get gesture data
Change-Id: If3ebbc4b65829def142835c51816b70e0a474865
Reviewed-on: https://gerrit.mot.com/2158726
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
FOD will turn on/off frequently, msleep will take longer delay than
expected, use mdelay to optimize the power up time.
Change-Id: I9c4d23f0c3b98713eeee7bb1393106ebac507af4
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2157879
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
1. Update FOD gesture trigger in screen off mode.
2. Add FOD event support in screen on mode
Change-Id: I7ecbfdb4aff8eaf34e88247d91d08279edd018a6
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2152070
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
TP:
When exiting the stylus mode, the IC will send an abnormal reset
interrupt. At this time, the stylus will be enabled again,
but because the stylus clock is closed, the touch will not work.
Change-Id: Id1b393de2b2bee5b06e9d4f5b74dfd301be4547d
Reviewed-on: https://gerrit.mot.com/2150837
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
Record the value of the received mode from system and the value
successfully set to the touch IC.
Change-Id: Ie10f25be6d0d9fe9d21cf385a626496cc9aedfa5
Reviewed-on: https://gerrit.mot.com/2144916
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Control gpio switch and regulator of fingerprint according to
the configuration of device node.
Change-Id: I2c581df3a88cf02089f0e8edd9f45ea09715c2e5
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2132820
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
TP:
Support film sensitivity function in RoguePRC project.
Change-Id: I830adb55e9b9b93aef6dc90d757ef9eaf206a2cb
Reviewed-on: https://gerrit.mot.com/2134201
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1. If the interpolation mode is disabled, the report rate is the
default 240Hz(Hiphic) or 360Hz(Hiphi)
2. If the interpolation is enabled and the refresh
rate is 144Hz, the reporting rate is 576Hz(Hiphic) 720Hz(Hiphi)
3. At other refresh rate, if the interpolation mode is enabled, the
report rate is 480Hz(Hiphic) 720Hz(Hiphi).
Change-Id: Ibcd6ba61457e5e5f6fd32a6583f5bdcada531fc5
Reviewed-on: https://gerrit.mot.com/2134669
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Goodix IC requires device confirm within 50ms after power on.
If this time exceeds 50ms, the i2c firmware will colse the
spi channel, and the spi firmware will close the i2c channel.
Change-Id: I178cea55e280ffb53fca444cdd8ed32905a928c5
Reviewed-on: https://gerrit.mot.com/2133988
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
When entering the deepsleep state, touch IC will power off,
so there is no need to send the suspend command.
Change-Id: I6b6a3b29eb3b1acee6c72db2b97fdb90710f25bc
Reviewed-on: https://gerrit.mot.com/2134059
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
zhuwg1