Commit Graph
15 Commits
Author SHA1 Message Date
Greg Kroah-Hartman bcf9517454 Merge 4.19.135 into android-4.19-stable
Changes in 4.19.135
	soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner
	gpio: arizona: handle pm_runtime_get_sync failure case
	gpio: arizona: put pm_runtime in case of failure
	pinctrl: amd: fix npins for uart0 in kerncz_groups
	mac80211: allow rx of mesh eapol frames with default rx key
	scsi: scsi_transport_spi: Fix function pointer check
	xtensa: fix __sync_fetch_and_{and,or}_4 declarations
	xtensa: update *pos in cpuinfo_op.next
	drivers/net/wan/lapbether: Fixed the value of hard_header_len
	net: sky2: initialize return of gm_phy_read
	drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
	drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()
	fuse: fix weird page warning
	irqdomain/treewide: Keep firmware node unconditionally allocated
	SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")
	spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
	tipc: clean up skb list lock handling on send path
	IB/umem: fix reference count leak in ib_umem_odp_get()
	uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
	ALSA: info: Drop WARN_ON() from buffer NULL sanity check
	ASoC: rt5670: Correct RT5670_LDO_SEL_MASK
	btrfs: fix double free on ulist after backref resolution failure
	btrfs: fix mount failure caused by race with umount
	btrfs: fix page leaks after failure to lock page for delalloc
	bnxt_en: Fix race when modifying pause settings.
	fpga: dfl: fix bug in port reset handshake
	hippi: Fix a size used in a 'pci_free_consistent()' in an error handling path
	ax88172a: fix ax88172a_unbind() failures
	net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration
	ieee802154: fix one possible memleak in adf7242_probe
	drm: sun4i: hdmi: Fix inverted HPD result
	net: smc91x: Fix possible memory leak in smc_drv_probe()
	bonding: check error value of register_netdevice() immediately
	mlxsw: destroy workqueue when trap_register in mlxsw_emad_init
	qed: suppress "don't support RoCE & iWARP" flooding on HW init
	ipvs: fix the connection sync failed in some cases
	net: ethernet: ave: Fix error returns in ave_init
	i2c: rcar: always clear ICSAR to avoid side effects
	bonding: check return value of register_netdevice() in bond_newlink()
	serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X
	scripts/decode_stacktrace: strip basepath from all paths
	scripts/gdb: fix lx-symbols 'gdb.error' while loading modules
	HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override
	HID: alps: support devices with report id 2
	HID: steam: fixes race in handling device list.
	HID: apple: Disable Fn-key key-re-mapping on clone keyboards
	dmaengine: tegra210-adma: Fix runtime PM imbalance on error
	Input: add `SW_MACHINE_COVER`
	spi: mediatek: use correct SPI_CFG2_REG MACRO
	regmap: dev_get_regmap_match(): fix string comparison
	hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
	dmaengine: ioat setting ioat timeout as module parameter
	Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
	usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
	hwmon: (adm1275) Make sure we are reading enough data for different chips
	hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
	arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP
	x86: math-emu: Fix up 'cmp' insn for clang ias
	RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorw
	binder: Don't use mmput() from shrinker function.
	usb: xhci-mtk: fix the failure of bandwidth allocation
	usb: xhci: Fix ASM2142/ASM3142 DMA addressing
	Revert "cifs: Fix the target file was deleted when rename failed."
	staging: wlan-ng: properly check endpoint types
	staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
	staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
	staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
	staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
	serial: 8250: fix null-ptr-deref in serial8250_start_tx()
	serial: 8250_mtk: Fix high-speed baud rates clamping
	fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins.
	vt: Reject zero-sized screen buffer size.
	Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
	mm/memcg: fix refcount error while moving and swapping
	mm: memcg/slab: synchronize access to kmem_cache dying flag using a spinlock
	mm: memcg/slab: fix memory leak at non-root kmem_cache destroy
	io-mapping: indicate mapping failure
	drm/amdgpu: Fix NULL dereference in dpm sysfs handlers
	drm/amd/powerplay: fix a crash when overclocking Vega M
	parisc: Add atomic64_set_release() define to avoid CPU soft lockups
	x86, vmlinux.lds: Page-align end of ..page_aligned sections
	ASoC: rt5670: Add new gpio1_is_ext_spk_en quirk and enable it on the Lenovo Miix 2 10
	ASoC: qcom: Drop HAS_DMA dependency to fix link failure
	dm integrity: fix integrity recalculation that is improperly skipped
	ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb
	ath9k: Fix regression with Atheros 9271
	Linux 4.19.135

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0bbcde83e7c810352d998f28d3484efa2b9ede8e
2020-07-29 13:22:30 +02:00
Merlijn Wajer e8af9e4d70 Input: add SW_MACHINE_COVER
[ Upstream commit c463bb2a8f8d7d97aa414bf7714fc77e9d3b10df ]

This event code represents the state of a removable cover of a device.
Value 0 means that the cover is open or removed, value 1 means that the
cover is closed.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29 10:16:52 +02:00
Banajit Goswami 98a387cdfe ANDROID: GKI: ALSA: jack: Add support to report second microphone
ALSA jack framework currently supports reporting only
one single microphone. Add support to report presence of
the second microphone to userspace.

Test: build
Bug: 149430094
Change-Id: I72d16892f2fa563c026bf90d847d9365dcf2233a
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Signed-off-by: Meng Wang <mwang@codeaurora.org>
(cherry picked from commit b071d2a1b2)
Signed-off-by: Hridya Valsaraju <hridya@google.com>
2020-04-17 00:42:31 +00:00
Banajit Goswami 3d8c1bbf03 ANDROID: GKI: ALSA: jack: Update supported jack switch types
Change adds support for jack switch types supported
by platform.

This change also squashes the below changes-

include: increase allowed SW INPUT device ID from 15 to 32

Increase the Input device SW ID from 15 to 32. This is needed
to accommodate more input devices.

Test: build
Bug: 149430094
Change-Id: If77f8b37b4db72ada2b5d8a3095265eef90ab62b
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Signed-off-by: Meng Wang <mwang@codeaurora.org>
(cherry picked from commit 3e70a3037a)
Signed-off-by: Hridya Valsaraju <hridya@google.com>
2020-04-17 00:42:23 +00:00
Peter Hutterer 52e1f29e8b Input: restore EV_ABS ABS_RESERVED
[ Upstream commit c201e3808e0e4be9b98d192802085a9f491bd80c ]

ABS_RESERVED was added in d9ca1c990a7 and accidentally removed as part of
ffe0e7cf290f5c9 when the high-resolution scrolling code was removed.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13 09:50:56 +01:00
Stefan Brüns 4982327ff6 Input: add KEY_ROTATE_LOCK_TOGGLE
The key has the same use as the SW_ROTATE_LOCK, but is used on devices
where the state is not tracked by the hardware but has to be handled
in software.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-12-08 13:54:43 -08:00
Linus Torvalds 20df15783a Merge branch 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:

 - high resolution mode for Dell canvas support, from Benjamin Tissoires

 - pen handling fixes for the Wacom driver, from Jason Gerecke

 - i2c-hid: Apollo-Lake based laptops improvements, from Hans de Goede

 - Input/Core: eraser tool support, from Ping Cheng

 - new ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook
   Stduio and HP Elite book x360) supportm from Masaki Ota

 - other smaller assorted fixes

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
  HID: cp2112: fix broken gpio_direction_input callback
  HID: cp2112: fix interface specification URL
  HID: Wacom: switch Dell canvas into highres mode
  HID: wacom: generic: Send BTN_STYLUS3 when both barrel switches are set
  HID: sony: Fix SHANWAN pad rumbling on USB
  HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 device
  HID: add backlight level quirk for Asus ROG laptops
  HID: cp2112: add HIDRAW dependency
  HID: Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel
  HID: hid-logitech: remove redundant assignment to pointer value
  HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection
  HID: rmi: Check that a device is a RMI device before calling RMI functions
  HID: add multi-input quirk for GamepadBlock
  HID: alps: add new U1 device ID
  HID: alps: add support for Alps T4 Touchpad device
  HID: alps: remove variables local to u1_init() from the device struct
  HID: alps: properly handle max_fingers and minimum on X and Y axis
  HID: alps: Separate U1 device code
  HID: alps: delete unnecessary struct u1_dev devInfo
  HID: usbhid: Convert timers to use timer_setup()
  ...
2017-11-15 09:43:57 -08:00
Jason Gerecke 9e429d5649 HID: wacom: generic: Send BTN_STYLUS3 when both barrel switches are set
The Wacom Pro Pen 3D includes a third barrel switch which is intended to
be particularly useful in applications where one frequency uses pan, zoom,
and rotate to navigate around a scene or model. The pen is compatible with
the MobileStudio Pro, 2nd-gen Intuos Pro, and Cintiq Pro. When the third
button is pressed, these devices set both the HID_DG_BARRELSWITCH and
HID_DG_BARRELSWITCH2 usages since their HID descriptors do not include a
usage specific to the button.

Rather than send both BTN_STYLUS and BTN_STYLUS2 when the third button is
pressed, userspace (libinput) has requested that we detect this condition
and report a newly-defined BTN_STYLUS3 event instead. We could define a
quirk specific to devices compatible with the Pro Pen 3D, but the liklihood
of seeing both barrel switch bits set with other pens/devices is low enough
to not worry about (pens mechanically prevent accidental activation of
multiple switches).

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-09 13:32:43 +01:00
Greg Kroah-Hartman e2be04c7f9 License cleanup: add SPDX license identifier to uapi header files with a license
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:20:11 +01:00
Dmitry Torokhov 8883261371 Input: introduce KEY_ASSISTANT
This adds a new keycode to allow users invoke a context-aware desktop
assistant application.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-02 13:40:25 -07:00
Ping Cheng 4eb220cb35 HID: wacom: generic: add 3 tablet touch keys
This patch add support to the 3 touch keys on Wacom Cintiq Pro.  These touch
keys are in the middle of the other two keys on the top edge of the tablet.

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-06 14:06:51 +01:00
Ping Cheng 2425f18081 Input: change KEY_DATA from 0x275 to 0x277
0x275 is used by KEY_FASTREVERSE.

Fixes: 488326947c ("Input: add HDMI CEC specific keycodes")
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30 08:59:26 -08:00
Douglas Anderson 9a9b6aa6a8 Input: add SW_PEN_INSERTED define
Some devices with a pen may have a switch that can be used to detect
when the pen is inserted or removed to a slot on the device.  Let's add
a define to the input event codes so that everyone can be on the same
page for what event we should generate when the pen is inserted or
removed.

In general the pen switch could be used by the software on the device to
kick off any number of actions when the pen is inserted or removed.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-29 09:51:03 -07:00
Kamil Debski 488326947c Input: add HDMI CEC specific keycodes
Add HDMI CEC specific keycodes to the keycodes definition.

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-18 10:32:29 -07:00
Hans de Goede f902dd8934 Input: add input-event-codes header file
Add input-event-codes header file and move all type and axis defines
there.

The purpose of this new header file is to have a single canonical source
for event-codes which can be used outside of C-code too. One example of
such usage is the use of event-codes in devicetree source files.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-16 15:32:05 -07:00