Add WSA VI sense macro to support VI sense capture.
Change-Id: I704aa6fbcb3908c0b76c82c941818b64e1d4598b
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
EAR PA short switch is not released after
PA is turned on and off.
Address this hardware issue by updating the
EAR PA CnP FSM while EAR power down sequence.
Change-Id: If4269c30c13572db1b252f223368d444b9250901
Signed-off-by: Soumya Managoli <smanag@codeaurora.org>
Enable component after enabling interrupt to avoid missing
some intterupt during master init.
Change-Id: I0f60c5431a815c58f878d3b9275a046e47939111
Signed-off-by: Meng Wang <mengw@codeaurora.org>
EAR PA short switch is not released after
PA is turned on and off.
Address this hardware issue by updating the
EAR PA CnP FSM while EAR power down sequence.
Change-Id: If4269c30c13572db1b252f223368d444b9250901
Signed-off-by: Soumya Managoli <smanag@codeaurora.org>
Enable interrupt request only when the interrupt is
in disabled state.
Change-Id: I67795bf0ee344661e02b0fec3181cd7980d56652
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
ATE stores the calibration result in EFUSE register. This has to
be copied to sleep bandgap voltage for accurate calibration.
Change-Id: I118c5c3b42ba4cfd42185d8da6d468f44e31b88f
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Race condition observed while processing the
get/set_pp_params and adm_close command.
Synchronise adm open, close and get/set_pp_params
by sending the apr cmd pkt using the same lock.
Change-Id: I9a1ebcedc91f78f3940846688f8569ec9088e1e7
Signed-off-by: Soumya Managoli <smanag@codeaurora.org>
Add change to micbias reg for new tanggu fab id.
Change-Id: I9bfa54c6ee3b87db56e72c1fefb4d4f0db461f14
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update register value for new fab id for tanggu.
Change-Id: I13594dbd311bbeab115753e0bec1a748158f8100
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Crash is happening in q6afe_get_avcs_modules in
APTX-Adaptive case. Check for format_id as
aptx_adaptive or lc3 to resolve crash.
Change-Id: I3e47bf38010a20df746455e35e316fa2103bc04a
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Depending on efuse reg value, if fab id is enabled,
change resistor divider output to P12 for both hphl and hphr.
Change-Id: If5e0caac2648f6e0b8c089bb56883a442b5a8ecd
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
To avoid out of bound value of output/input
channel add the check.
Change-Id: I25b7616d6fc08c2d0bb530dfb1457471dc25861c
Signed-off-by: Shashi Kant Maurya <smaury@codeaurora.org>
Signed-off-by: Ramu Gottipati <ramug@codeaurora.org>
Due to datalane mismatch, update rx frame config to use DATA_LANE0 for
khaje qrd.
Change-Id: I0f5720ab1d7b7c585f7df986481c28568385f09d
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
Memory allocation for wcd-cpe ramdump fails as memory is
not allocated from CMA reserve leading to CPE configuration
failure.
So force driver to allocate memory from CMA by
initializing the device’s coherent_dma_mask and dma_mask.
Fixes the SVA CPE sound model loading issue on tashalite variants.
Change-Id: Ic47017009aee666e364c7ec3ac62725c77a36b3c
Signed-off-by: Shashi Kant Maurya <smaury@codeaurora.org>
Due to datalane mismatch, update rx frame config to use DATA_LANE0 for
khaje qrd.
Change-Id: I0f5720ab1d7b7c585f7df986481c28568385f09d
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
Random issue of delayed voice component probe is observed
sometimes happening after sound card registration. This causes
voice component driver probe not getting called during card registration and
results in voice mixer controls like CVD_Version missed out from sound mixer controls.
This results in crash in audio HAL acdb initialization flow.
Fix is to check for voice pcm probe status in machine driver and
defer until done.
Change-Id: Ib4e380da90d3dd66f054b46227e9fb79648b7524
Signed-off-by: Subhadra Jagadeesan <subhja@codeaurora.org>
Register for the widgets and interconnections in routing
driver only when the respective interfaces are supported.
Add config based approach for CDC_DMA interface.
Change-Id: I56a8a3c14896cd1e267a4099e90ca480d13e2d6f
Signed-off-by: Subhadra Jagadeesan <subhja@codeaurora.org>
Added configs to disable CDC_DMA interface in sdm450 autoconf.
This is done to disable mixer controls and related
intercon routes in routing driver to avoid registration of
unnecessary sound controls to optimize audio sound card loading.
Change-Id: I6040f5f8ff5c0e09960bbb0332c7890f2b183f04
Signed-off-by: Subhadra Jagadeesan <subhja@codeaurora.org>
Set initial vaue for cfg_type to avoid possible
accessing of uninitialized variable.
Change-Id: Ib2fa91202442a656915263694bd6fbf5cd663544
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Add support of wsa883x on qrb5165.
Since both qrb5165 and sxr2130 use the same kona`s config,
qrb5165 also needs to support wsa883x compilation,
otherwise carsh will appear.
Change-Id: Ibc9606b41bc3ae89672f8c4588c91c601cd8ea4c
Signed-off-by: Shuai Zhang <shuzhan@qti.qualcomm.com>
Enable wsa881x-temp-sensor only for bengal, since
sdm450 uses both analog and digital wsa and would
cause symbolic error as wsa881x-temp-sensor would
be enabled twice.
Change-Id: Ibe78bee9a4400f5c4a355056b53d0bf726546f55
Signed-off-by: Sujin Panicker <c_spanic@qti.qualcomm.com>
Faiz Nabi Kuchay