From b971046defae37ac4c5d07e689424c21241360cf Mon Sep 17 00:00:00 2001 From: wunan3 Date: Mon, 29 Jun 2020 15:22:02 +0800 Subject: [PATCH] arm/dts:cebu:sar sensor bring up WHY:sar sensor bringup for cebu HOW:add dts parameter Change-Id: Id056bcadf583611600efb13741c7a814fe72357b Signed-off-by: wunan3 Reviewed-on: https://gerrit.mot.com/1649451 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Jianguo Liu Reviewed-by: Xiangpo Zhao Submit-Approved: Jira Key --- qcom/bengal-cebu-common-overlay.dtsi | 34 ++++++++++++++++++++-------- 1 file changed, 25 insertions(+), 9 deletions(-) diff --git a/qcom/bengal-cebu-common-overlay.dtsi b/qcom/bengal-cebu-common-overlay.dtsi index dce494c1aa68..7b2b9395fdde 100644 --- a/qcom/bengal-cebu-common-overlay.dtsi +++ b/qcom/bengal-cebu-common-overlay.dtsi @@ -185,27 +185,43 @@ qcom,init-voltage = <2800000>; }; -&qupv3_se0_i2c { +&pm6125_l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + qcom,init-voltage = <1800000>; +}; + +&pm6125_l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + qcom,init-voltage = <2400000>; +}; + + + +&qupv3_se2_i2c { status = "ok"; sar_abov: abov_sar@20 { status = "ok"; compatible = "abov,abov_sar_mmi_overlay"; reg = <0x20>; - cap_vdd-supply = <&L21A>; + cap_vdd-supply = <&pm6125_l21>; + cap_svdd-supply =<&pm6125_l9>; interrupt-parent = <&tlmm>; interrupts = <36 0x2>; gpios = <&tlmm 36 0x2>; pinctrl-names = "default"; pinctrl-0 = <&capsense_sar_gpio_pins>; reg_array_len = <0x03>; - reg_array_val = <0x07 0x00 0x08 0x1B 0xFB 0x01>; - cap,use_channel_ch1 = <0x00>; - cap,use_channel_ch0 = <0x01>; - ch0_name = "capsense_top"; - ch1_name = "capsense_bottom"; + reg_array_val = <0x07 0x00 0x08 0x1F 0xFB 0x01>; + cap,use_channel_ch0 = <0x00>; + cap,use_channel_ch1 = <0x01>; + cap,use_channel_ch2 = <0x02>; + ch0_name = "capsense_bottom_right"; + ch1_name = "capsense_bottom_left"; + ch2_name = "capsense_top"; label = "AbovCapSense"; - cap,channel_number = <0x02>; - cap,fw_mode_ret = <0x3A>; + cap,channel_number = <0x03>; }; };