From 521fde25fae4d36613f09ff83e753fb5fd736096 Mon Sep 17 00:00:00 2001
From: zhouwl <zhouwl@lenovo.com>
Date: Fri, 29 May 2020 15:11:16 +0800
Subject: [PATCH] arm/dts: init audio dtsi for Borneo NA

Borneo NA audio devicetree configuration,
uses aw88258 speaker amplifier.

Change-Id: Ic40a1bb80969400dcfb69982fad5c380948351a5
Signed-off-by: zhouwl <zhouwl@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1587082
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
---
 qcom/bengal-borneo-audio-overlay.dtsi | 119 +++++++++++++++++++-------
 1 file changed, 87 insertions(+), 32 deletions(-)

diff --git a/qcom/bengal-borneo-audio-overlay.dtsi b/qcom/bengal-borneo-audio-overlay.dtsi
index 18a369567fbd..8abb0625abe1 100644
--- a/qcom/bengal-borneo-audio-overlay.dtsi
+++ b/qcom/bengal-borneo-audio-overlay.dtsi
@@ -13,53 +13,108 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 &qupv3_se1_i2c {
-        status = "ok";
-        fs16xx@34 {
-                compatible = "foursemi,fs16xx";
-                reg = <0x34>;
-                fs,fs-dev = "left";
-                /* 1V8 supplied by LDO */
-                vddcore-supply = <&L9A>;
-                status = "okay";
-        };
+	status = "ok";
+	aw882xx_smartpa@34 {
+		compatible = "awinic,aw882xx_smartpa";
+		reg = <0x34>;
+		reset-gpio = <&tlmm 106 0>;
+		irq-gpio = <&tlmm 107 0x2008>;
+		monitor-flag = <1>;
+		monitor-timer-val = <3000>;
+		aw-cali-mode = "aw_misc";
+		status = "okay";
+	};
 };
 
-/* Add pinctrl for MI2S0 */
 &soc {
-        cdc_pri_mi2s_gpios: msm_cdc_pinctrl_pri {
-                compatible = "qcom,msm-cdc-pinctrl";
-                pinctrl-names = "aud_active", "aud_sleep";
-                pinctrl-0 = <&lpi_i2s1_sck_active &lpi_i2s1_ws_active
-                        &lpi_i2s1_sd0_active &lpi_i2s1_sd1_active>;
-                pinctrl-1 = <&lpi_i2s1_sck_sleep &lpi_i2s1_ws_sleep
-                        &lpi_i2s1_sd0_sleep &lpi_i2s1_sd1_sleep>;
-        };
+	cdc_pri_mi2s_gpios: msm_cdc_pinctrl_pri {
+		compatible = "qcom,msm-cdc-pinctrl";
+		pinctrl-names = "aud_active", "aud_sleep";
+		pinctrl-0 = <&lpi_i2s1_sck_active &lpi_i2s1_ws_active
+				&lpi_i2s1_sd0_active &lpi_i2s1_sd1_active>;
+		pinctrl-1 = <&lpi_i2s1_sck_sleep &lpi_i2s1_ws_sleep
+				&lpi_i2s1_sd0_sleep &lpi_i2s1_sd1_sleep>;
+		qcom,lpi-gpios;
+	};
 };
 
-/* Configure MI2S0 SD0&SD1 */
 &dai_mi2s0 {
-        /* SD0 line for playback */
-        qcom,msm-mi2s-rx-lines = <1>;
-        /* SD1 line for recording(SmartPA EC) */
-        qcom,msm-mi2s-tx-lines = <2>;
+	status = "ok";
+	qcom,msm-mi2s-rx-lines = <1>;
+	qcom,msm-mi2s-tx-lines = <2>;
 };
 
 /* Modify btfmslim_codec's compatible */
 &btfmslim_codec {
-        compatible = "btfmslim_slave";
-        status = "ok";
+	compatible = "btfmslim_slave";
+	status = "ok";
 };
 
-
 &bengal_snd {
-        qcom,model = "bengal-fs-snd-card";
-	fs,have-16xx = <1>;
+	qcom,model = "bengal-awinic-snd-card";
+
+	qcom,audio-routing =
+		"AMIC1", "MIC BIAS1",
+		"MIC BIAS1", "Analog Mic1",
+		"AMIC2", "MIC BIAS2",
+		"MIC BIAS2", "Analog Mic2",
+		"AMIC3", "MIC BIAS3",
+		"MIC BIAS3", "Analog Mic3",
+		"AMIC4", "MIC BIAS3",
+		"MIC BIAS3", "Analog Mic4",
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"IN3_AUX", "AUX_OUT",
+		"SpkrMono WSA_IN", "AUX",
+		"TX SWR_MIC0", "ADC1_OUTPUT",
+		"TX SWR_MIC4", "ADC2_OUTPUT",
+		"TX SWR_MIC5", "ADC3_OUTPUT",
+		"TX SWR_MIC0", "VA_TX_SWR_CLK",
+		"TX SWR_MIC1", "VA_TX_SWR_CLK",
+		"TX SWR_MIC2", "VA_TX_SWR_CLK",
+		"TX SWR_MIC3", "VA_TX_SWR_CLK",
+		"TX SWR_MIC4", "VA_TX_SWR_CLK",
+		"TX SWR_MIC5", "VA_TX_SWR_CLK",
+		"TX SWR_MIC6", "VA_TX_SWR_CLK",
+		"TX SWR_MIC7", "VA_TX_SWR_CLK",
+		"TX SWR_MIC8", "VA_TX_SWR_CLK",
+		"TX SWR_MIC9", "VA_TX_SWR_CLK",
+		"TX SWR_MIC10", "VA_TX_SWR_CLK",
+		"TX SWR_MIC11", "VA_TX_SWR_CLK",
+		"RX_TX DEC0_INP", "TX DEC0 MUX",
+		"RX_TX DEC1_INP", "TX DEC1 MUX",
+		"RX_TX DEC2_INP", "TX DEC2 MUX",
+		"RX_TX DEC3_INP", "TX DEC3 MUX",
+		"TX_AIF1 CAP", "VA_TX_SWR_CLK",
+		"TX_AIF2 CAP", "VA_TX_SWR_CLK",
+		"TX_AIF3 CAP", "VA_TX_SWR_CLK",
+		"VA SWR_MIC0", "ADC1_OUTPUT",
+		"VA SWR_MIC4", "ADC2_OUTPUT",
+		"VA SWR_MIC5", "ADC3_OUTPUT";
 
 	qcom,mi2s-audio-intf = <1>;
 	qcom,pri-mi2s-gpios = <&cdc_pri_mi2s_gpios>;
-        /delete-property/ qcom,cdc-dmic01-gpios;
-        /delete-property/ qcom,cdc-dmic23-gpios;
+	aw,have-882xx = <1>;
+	qcom,wsa-max-devs = <0>;
+	/delete-property/ qcom,wsa-devs;
+	/delete-property/ qcom,wsa-aux-dev-prefix;
+	/delete-property/ qcom,cdc-dmic01-gpios;
+	/delete-property/ qcom,cdc-dmic23-gpios;
+};
 
-        qcom,wsa-max-devs = <0>;
-        qcom,wsa-devs = <0>;
+&fsa4480 {
+	status = "disabled";
+};
+
+&cdc_dmic01_gpios {
+	status = "disabled";
+};
+
+&cdc_dmic23_gpios {
+	status = "disabled";
+};
+
+/* Modify headset's BIAS voltage to 2.6V */
+&wcd937x_codec {
+	qcom,cdc-micbias2-mv = <2600>;
 };