From 1716bbd8d83bd45d6ee2da6112e66d4c469d89ff Mon Sep 17 00:00:00 2001
From: tinno18 <tinno18@motorola.com>
Date: Fri, 10 Dec 2021 14:54:46 +0800
Subject: [PATCH] Hawaii+OLED: thermal adc NTC Bringup.

modified:   khaje-hawao-common-overlay.dtsi
Hawaii+OLED:thermal adb NTC bringup

Change-Id: I07973832be0b36ee75e24517d331cf0883682e2b
Reviewed-on: https://gerrit.mot.com/2140776
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Submit-Approved: Jira Key
Tested-by: Jira Key
Reviewed-by: <tinno18@motorola.com>
SLTApproved: <tinno18@motorola.com>
Submit-Approved: <tinno18@motorola.com>
Tested-by: <tinno18@motorola.com>
Reviewed-by: Qiong Xie <xieq2@motorola.com>
(cherry picked from commit 24c203e96be43fe4e3684793c38bef0f92d6314f)
Reviewed-on: https://gerrit.mot.com/2145311
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
---
 qcom/khaje-hawao-common-overlay.dtsi | 135 +++++++++++++++++++++++++++
 1 file changed, 135 insertions(+)

diff --git a/qcom/khaje-hawao-common-overlay.dtsi b/qcom/khaje-hawao-common-overlay.dtsi
index 57061105e587..bbb1c0e6bd53 100644
--- a/qcom/khaje-hawao-common-overlay.dtsi
+++ b/qcom/khaje-hawao-common-overlay.dtsi
@@ -12,6 +12,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/iio/qti_power_supply_iio.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
 #include "khaje-moto-common-overlay.dtsi"
 #include "khaje-hawao-display.dtsi"
 #include "khaje-hawao-fps-overlay_evb.dtsi"
@@ -116,3 +117,137 @@
 		dr_mode = "otg";
 	};
 };
+
+&pm6125_vadc {
+	pinctrl-0 = <&camera_therm_default &emmc_therm_default &chg_therm_default>;
+
+	chg_therm {
+		reg = <ADC_GPIO4_PU2>;
+		label = "chg_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&pm6125_adc_tm {
+	io-channels = <&pm6125_vadc ADC_AMUX_THM1_PU2>,
+			<&pm6125_vadc ADC_AMUX_THM2_PU2>,
+			<&pm6125_vadc ADC_XO_THERM_PU2>,
+			<&pm6125_vadc ADC_GPIO4_PU2>;
+
+	chg_therm {
+		reg = <ADC_GPIO4_PU2>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+};
+
+&pm6125_gpios {
+
+	chg_therm {
+		chg_therm_default: chg_therm_default {
+			pins = "gpio7";
+			 bias-high-impedance;
+		};
+	};
+};
+
+&thermal_zones {
+	sdm-skin-therm-usr {
+		status = "disabled";
+	};
+	rear-cam-therm-usr {
+		status = "disabled";
+	};
+	camera-therm-usr {
+		status = "disabled";
+	};
+	quiet-therm-usr {
+		status = "disabled";
+	};
+	pa-therm0-usr {
+		status = "disabled";
+	};
+	pa-therm1-usr {
+		status = "disabled";
+	};
+	xo-therm-usr {
+		status = "disabled";
+	};
+
+	pa_therm0 {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-governor = "user_space";
+		thermal-sensors = <&pm6125_adc_tm ADC_AMUX_THM1_PU2>;
+		wake-capable-sensor;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+
+	quiet_therm {
+                polling-delay-passive = <0>;
+                polling-delay = <0>;
+                thermal-governor = "user_space";
+                thermal-sensors = <&pm6125_adc_tm ADC_AMUX_THM2_PU2>;
+                wake-capable-sensor;
+                trips {
+                        active-config0 {
+                                temperature = <125000>;
+                                hysteresis = <1000>;
+                                type = "passive";
+                        };
+                };
+        };
+
+	chg_therm {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-governor = "user_space";
+		thermal-sensors = <&pm6125_adc_tm ADC_GPIO4_PU2>;
+		wake-capable-sensor;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+
+	msm_therm {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-governor = "user_space";
+		thermal-sensors = <&pm6125_adc_tm_iio ADC_GPIO2_PU2>;
+		wake-capable-sensor;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+
+	camera_flash_therm {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-governor = "user_space";
+		thermal-sensors = <&pm6125_adc_tm_iio ADC_GPIO1_PU2>;
+		wake-capable-sensor;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+};