diff --git a/qcom/khaje-hawao-nfc-overlay.dtsi b/qcom/khaje-hawao-nfc-overlay.dtsi
index 5e9d4576df4b..784610cc43b7 100644
--- a/qcom/khaje-hawao-nfc-overlay.dtsi
+++ b/qcom/khaje-hawao-nfc-overlay.dtsi
@@ -1,123 +1,90 @@
 
 &tlmm {
 
-	nfc {
-			nfc_int_active: nfc_int_active {
-				/* active state */
-				mux {
-					/* GPIO 70 NFC Read Interrupt */
-					pins = "gpio70";
-					function = "gpio";
-				};
-
-				config {
-					pins = "gpio70";
-					drive-strength = <2>; /* 2 MA */
-					bias-pull-up;
-				};
+       qupv3_se1_i2c_pins: qupv3_se1_i2c_pins{
+		qupv3_se1_i2c_act: qupv3_se1_i2c_active {
+			mux {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
 			};
 
-			nfc_int_suspend: nfc_int_suspend {
-				/* sleep state */
-				mux {
-					/* GPIO 70 NFC Read Interrupt */
-					pins = "gpio70";
-					function = "gpio";
-				};
+			config {
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
 
-				config {
-					pins = "gpio70";
-					drive-strength = <2>; /* 2 MA */
-					bias-pull-up;
-				};
+		qupv3_se1_i2c_sle: qupv3_se1_i2c_sleep {
+			mux {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
 			};
 
-			nfc_enable_active: nfc_enable_active {
-				/* active state */
-				mux {
-					/* 69: Enable 31: Firmware */
-					pins = "gpio69", "gpio31";
-					function = "gpio";
-				};
-
-				config {
-					pins = "gpio69", "gpio31";
-					drive-strength = <2>; /* 2 MA */
-					bias-pull-up;
-				};
-			};
-
-			nfc_enable_suspend: nfc_enable_suspend {
-				/* sleep state */
-				mux {
-					/* 69: Enable 31: Firmware */
-					pins = "gpio69", "gpio31";
-					function = "gpio";
-				};
-
-				config {
-					pins = "gpio69", "gpio31";
-					drive-strength = <2>; /* 2 MA */
-					bias-disable;
-				};
-			};
-			nfc_clk_req_active {
-				/* active state */
-				mux {
-					/* GPIO 71: NFC CLOCK REQUEST */
-					pins = "gpio71";
-					function = "gpio";
-				};
-
-				config {
-					pins = "gpio71";
-					drive-strength = <2>; /* 2 MA */
-					bias-pull-up;
-				};
-			};
-
-			nfc_clk_req_suspend {
-				/* sleep state */
-				mux {
-					/* GPIO 71: NFC CLOCK REQUEST */
-					pins = "gpio71";
-					function = "gpio";
-				};
-
-				config {
-					pins = "gpio71";
-					drive-strength = <2>; /* 2 MA */
-					bias-disable;
-				};
+			config {
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-pull-up;
+				input-enable;
 			};
+		};
 	};
 
+
+	nfc {
+		nfc_clk_req_active {
+			/* active state */
+			mux {
+				/* GPIO 112: NFC CLOCK REQUEST */
+				pins = "gpio112";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio112";
+				drive-strength = <2>; /* 2 MA */
+				bias-pull-up;
+			};
+		};
+
+		nfc_clk_req_suspend {
+			/* sleep state */
+			mux {
+				/* GPIO 112: NFC CLOCK REQUEST */
+				pins = "gpio112";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio112";
+				drive-strength = <2>; /* 2 MA */
+				bias-disable;
+			};
+		};
+	};
 };
 
 &qupv3_se1_i2c {
-	#address-cells = <1>;
-        #size-cells = <0>;
-        status = "okay";
+  #address-cells = <1>;
+  #size-cells = <0>;
+  status = "okay";
+  pinctrl-0 = <&qupv3_se1_i2c_act>;
+  pinctrl-1 = <&qupv3_se1_i2c_sle>;
+  sec-nfc@27 {
+    compatible = "sec-nfc";
+    reg = <0x27>;
+    sec-nfc,ven-gpio = <&tlmm 69 0x00>;
+    sec-nfc,firm-gpio = <&tlmm 31 0x00>;
+    sec-nfc,irq-gpio = <&tlmm 70 0x00>;
+    sec-nfc,clk_req-gpio = <&tlmm 112 0x00>;
+    interrupt-parent = <&tlmm>;
+    interrupts = <70 0>;
+    interrupt-names = "nfc_irq";
+    pinctrl-names = "nfc_active", "nfc_suspend";
+    pinctrl-0 = <&nfc_int_active &nfc_enable_active &nfc_clk_req_active>;
+    pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend &nfc_clk_req_suspend>;
+    clock-names = "OSC_NFC";
 
-        sec-nfc@27 {
-          compatible = "sec-nfc";
-          reg = <0x27>;
-
-          sec-nfc,ven-gpio = <&tlmm 69 0x00>;
-          sec-nfc,firm-gpio = <&tlmm 31 0x00>;
-          sec-nfc,irq-gpio = <&tlmm 70 0x00>;
-          //sec-nfc,clk_req-gpio = <&tlmm 71 0x00>;
-          //sec-nfc,pmic-ldo = "vdd_ldo20";
-          //clkctrl-reg = <0x10e60a0c>;
-          //clock-names = "OSC_NFC";
-          //clocks = <&rpmcc RPM_SMD_RF_CLK1>;
-          //pinctrl-names = "default";
-          //pinctrl-0 = <&xclkout1 &nfc_pd &nfc_clkreq>;
-	  pinctrl-names = "nfc_active", "nfc_suspend";
-	  pinctrl-0 = <&nfc_int_active &nfc_enable_active
-			&nfc_clk_req_active>;
-	  pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
-			&nfc_clk_req_suspend>;
-        };
+  };
 };