dts/arm64: add fps dts for rhode4g

dts/arm64:
add fps dts for rhode4g

Change-Id: Ib67bb6c83a1ab4f4f2bc38c5fd4430268ecd971c
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2107369
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key

qcom/khaje-rhode-common-overlay.dtsi

@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "khaje-moto-common-overlay.dtsi"
 #include "khaje-rhode-display.dtsi"
+#include "khaje-rhode-fps-overlay_evb.dtsi"
 
 &firmware {
 	android {
@@ -22,4 +23,12 @@
 		};
 	};
 };
-
+&soc {
+    qcom,tz_gpio {
+        compatible = "qcom,tz_gpio";
+        tlmm-tz = <14>,
+                        <15>,
+                        <16>,
+                        <17>;
+    };
+};

qcom/khaje-rhode-fps-overlay.dtsi

@@ -0,0 +1,193 @@
+
+&tlmm {
+
+	fps {
+
+		fingerfp_rst_high: fingerfp_rst_high {
+			mux {
+				pins = "gpio104";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio104";
+				drive-strength = <8>;
+				output-high;
+				bias-pull-up;
+			};
+		};
+
+		fingerfp_rst_low: fingerfp_rst_low {
+			mux {
+				pins = "gpio104";
+				function = "gpio";
+			};
+			config {
+				pins = "gpio3";
+				drive-strength = <8>;
+				output-low;
+				bias-pull-down;
+			};
+		};
+
+		fingerfp_irq_active: fingerfp_irq_active {
+			mux {
+				pins = "gpio83";
+				function = "gpio";
+			};
+			config {
+				pins = "gpio83";
+				drive-strength = <2>;
+				bias-disable;
+				input-enable;
+			};
+		};
+
+		fingerfp_vcc_high: fingerfp_vcc_high {
+			mux {
+				pins = "gpio108";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio108";
+				drive-strength = <2>;
+				bias-disable;
+				output-high;
+			};
+		};
+	
+		fingerfp_vcc_low: fingerfp_vcc_low {
+			mux {
+				pins = "gpio108";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio108";
+				drive-strength = <2>;
+				bias-disable;
+				output-low;
+			};
+		};
+
+		
+		pmx_fp_pwr_high {
+			fingerprint_pins_power_output1: fingerprint_pins_power_output1 {
+				mux {
+					pins = "gpio108";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio108";
+					drive-strength = <2>;
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		pmx_fp_pwr_low {
+			fingerprint_pins_power_output0: fingerprint_pins_power_output0 {
+				mux {
+					pins = "gpio108";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio108";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+			};
+		};
+
+		pmx_fp_int_active {
+
+			fingerprint_pins_eint_as_int: fingerprint_pins_eint_as_int
+			{
+				mux {
+					pins = "gpio83";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio83";
+					drive-strength = <2>;
+					bias-disable;
+					input-enable;
+				};
+			};
+		};
+
+		pmx_fp_reset_active {
+			fingerprint_pins_rst_output1: fingerprint_pins_rst_output1 {
+				mux {
+					pins = "gpio104";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio104";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		pmx_fp_reset_suspend {
+			fingerprint_pins_rst_output0: fingerprint_pins_rst_output0 {
+				mux {
+					pins = "gpio104";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio104";
+					drive-strength = <8>;
+					bias-disable;
+					output-low;
+				};
+			};
+		};
+	};
+};
+
+&soc {
+
+	et528: et528 {
+		status = "ok"
+		compatible = "fp-egistec";
+		fp-ctrl-power;
+		fp-gpio-vcc-enable;
+		egistec,gpio_irq = <&tlmm 83 0x00>;
+		egistec,gpio_reset = <&tlmm 104 0x00>;
+		egistec,gpio_vcc_en = <&tlmm 108 0x00>;
+		pinctrl-names = "egis_rst_high", "egis_rst_low", "egis_irq_active","egis_vcc_high","egis_vcc_low";
+		pinctrl-0 = <&fingerfp_rst_high>;
+		pinctrl-1 = <&fingerfp_rst_low>;
+		pinctrl-2 = <&fingerfp_irq_active>;
+		pinctrl-3 = <&fingerfp_vcc_high>;
+		pinctrl-4 = <&fingerfp_vcc_low>;
+	};
+
+	focalfp_ft9362 {
+		status = "ok"
+		compatible = "focaltech,fingerprint";
+		interrupt-parent = <&tlmm>;
+		interrupts = <83 0x0>;
+		fp,reset_gpio = <&tlmm 104 0>;
+		fp,irq_gpio = <&tlmm 83 0>;
+		fp,vdd_gpio = <&tlmm 108 0>;
+
+		pinctrl-names = "fpsensor_finger_power_high","fpsensor_finger_power_low","fpsensor_finger_rst_low","fpsensor_finger_rst_high","fpsensor_eint_as_int";
+		pinctrl-0 = <&fingerprint_pins_power_output1>;
+		pinctrl-1 = <&fingerprint_pins_power_output0>;
+		pinctrl-2 = <&fingerprint_pins_rst_output0>;
+		pinctrl-3 = <&fingerprint_pins_rst_output1>;
+		pinctrl-4 = <&fingerprint_pins_eint_as_int>;
+	};
+};

qcom/khaje-rhode-fps-overlay_evb.dtsi

@@ -0,0 +1,193 @@
+
+&tlmm {
+
+	fps {
+
+		fingerfp_rst_high: fingerfp_rst_high {
+			mux {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio3";
+				drive-strength = <8>;
+				output-high;
+				bias-pull-up;
+			};
+		};
+
+		fingerfp_rst_low: fingerfp_rst_low {
+			mux {
+				pins = "gpio3";
+				function = "gpio";
+			};
+			config {
+				pins = "gpio3";
+				drive-strength = <8>;
+				output-low;
+				bias-pull-down;
+			};
+		};
+
+		fingerfp_irq_active: fingerfp_irq_active {
+			mux {
+				pins = "gpio83";
+				function = "gpio";
+			};
+			config {
+				pins = "gpio83";
+				drive-strength = <2>;
+				bias-disable;
+				input-enable;
+			};
+		};
+
+		fingerfp_vcc_high: fingerfp_vcc_high {
+			mux {
+				pins = "gpio54";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio54";
+				drive-strength = <2>;
+				bias-disable;
+				output-high;
+			};
+		};
+	
+		fingerfp_vcc_low: fingerfp_vcc_low {
+			mux {
+				pins = "gpio54";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio54";
+				drive-strength = <2>;
+				bias-disable;
+				output-low;
+			};
+		};
+
+		
+		pmx_fp_pwr_high {
+			fingerprint_pins_power_output1: fingerprint_pins_power_output1 {
+				mux {
+					pins = "gpio54";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio54";
+					drive-strength = <2>;
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		pmx_fp_pwr_low {
+			fingerprint_pins_power_output0: fingerprint_pins_power_output0 {
+				mux {
+					pins = "gpio54";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio54";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+			};
+		};
+
+		pmx_fp_int_active {
+
+			fingerprint_pins_eint_as_int: fingerprint_pins_eint_as_int
+			{
+				mux {
+					pins = "gpio83";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio83";
+					drive-strength = <2>;
+					bias-disable;
+					input-enable;
+				};
+			};
+		};
+
+		pmx_fp_reset_active {
+			fingerprint_pins_rst_output1: fingerprint_pins_rst_output1 {
+				mux {
+					pins = "gpio3";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio3";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		pmx_fp_reset_suspend {
+			fingerprint_pins_rst_output0: fingerprint_pins_rst_output0 {
+				mux {
+					pins = "gpio3";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio3";
+					drive-strength = <8>;
+					bias-disable;
+					output-low;
+				};
+			};
+		};
+	};
+};
+
+&soc {
+
+	et528: et528 {
+		status = "ok"
+		compatible = "fp-egistec";
+		fp-ctrl-power;
+		fp-gpio-vcc-enable;
+		egistec,gpio_irq = <&tlmm 83 0x00>;
+		egistec,gpio_reset = <&tlmm 3 0x00>;
+		egistec,gpio_vcc_en = <&tlmm 54 0x00>;
+		pinctrl-names = "egis_rst_high", "egis_rst_low", "egis_irq_active","egis_vcc_high","egis_vcc_low";
+		pinctrl-0 = <&fingerfp_rst_high>;
+		pinctrl-1 = <&fingerfp_rst_low>;
+		pinctrl-2 = <&fingerfp_irq_active>;
+		pinctrl-3 = <&fingerfp_vcc_high>;
+		pinctrl-4 = <&fingerfp_vcc_low>;
+	};
+
+	focalfp_ft9362 {
+		status = "ok"
+		compatible = "focaltech,fingerprint";
+		interrupt-parent = <&tlmm>;
+		interrupts = <83 0x0>;
+		fp,reset_gpio = <&tlmm 3 0>;
+		fp,irq_gpio = <&tlmm 83 0>;
+		fp,vdd_gpio = <&tlmm 54 0>;
+
+		pinctrl-names = "fpsensor_finger_power_high","fpsensor_finger_power_low","fpsensor_finger_rst_low","fpsensor_finger_rst_high","fpsensor_eint_as_int";
+		pinctrl-0 = <&fingerprint_pins_power_output1>;
+		pinctrl-1 = <&fingerprint_pins_power_output0>;
+		pinctrl-2 = <&fingerprint_pins_rst_output0>;
+		pinctrl-3 = <&fingerprint_pins_rst_output1>;
+		pinctrl-4 = <&fingerprint_pins_eint_as_int>;
+	};
+};